After Rendering

After rendering a video my playback shows the yellow Media Pending screen and I can't view my video in that sequence. I have found the only way to see my video again is to close premiere and reopen then it will be there and not rendered? Does anybody have any suggestions why this is happening? CS6
Thanks, Tim

That helped some but I still think I have some setting not right? I just upgraded to 6.0 and a new computer and just started having this porblem. I'm running an oracle with a ton of ram somewhere around 60 and really good graphics card I'm really surprised that I need to wait for a minute or 2 for the yellow render screen to go away and show my video again? Not sure just kinda quarky I think

Similar Messages

Sound problems after rendering

Hi,
Being that I have Premiere Pro 7.0, I am not too sure how much help I will get, but i was hoping that someone here could still help if all possible. Here is my problem. I thought I start practicing developing video lessons for 3d software. These lessons would be created using a screen captureing program, called camStudio. In my first lesson, my first try doing the entire lesson as one video, I found out that the video file size exceeded CamStudio's exporter file size allowance when trying to save out to Microsoft DV 1 AVI file. I then decided to split the lesson into 2, but final compose it as one video in Premiere Pro 7.0. Since the lesson was broken up into 2 screen captured videos, I thought it would make things easier if each screen captured video was in its own simulation. So, in other words, I have created 2 simulations in one project, and then I had nested both of them into the 3rd simulation. For example, simulation 1 was called lesson1 part a, and simulation 2 was named lesson1 part b, and the third simulation was called lesson1. Once I had everything setup, at first everything was working fine, meaing I could see the video and hear the sound tracks. However, after I choose to render the sequence using Microsoft DV11 AVI, I do not get any sound, and yet I made sure that the exporter exports both the video and audio. Furthermore, after rendering the project, going back to Premiere Pro's project, and pressing play, I get the error.... Disk Write Error: Verify drive connection, available disk space and disk access privileges
However, when I go inside simulation 1 or simulation 2, I still hear their sound tracks. One other thing I have noticed is that I get the sound back in the project if I move the orginal simulations into a new simulation. By doing that, I am then able to recover the project,. but if I choose to render again, the same process happens all over again.
Does anyone Have any ideas?
My Specs
Adobe Premiere Pro 7.0
Windows XP SP3
CPU 3.0GHz processor
RAM 512MB

so are you saying that the problem could be comming from how I did my recording with CamStudio? Not to change the subject, but you see, I am kind of lost. My goal is to provide some free video lessons. I was thinking my final encoded videos will be in DivX or XVid. CamStudio does offer users to compress to thise types of format. Howeveer, due to owning a very cheap microphone, those kinds that sit on your desktop, is causing me to have the biggest problem, since there is a good amount of background hissing noise in my recordings. So, I have been using both CamStudio for the screen capturing and Audacity to do the voice recording. Then in Audacity, I try my best of tuning up the voice and removing the background hissing noise. Once that is finished, I then need some sort of video editing software that allows me to put the video and my voice recodring together as well as splicing areas of the lesson where I stutter or slurr my speach a bit, which can be easily fixed in Adobe Premire Pro. However, my version of Premiere does not offer XVid or DivX encoding. I was thinking of using VirtualDub, but I really do not want to have 5 programs, just so that I can fix all of my problems, not to mention I have no $$$$ left. So is there a free better way?

How to retain the dialog messages defined in processRequest after rendering

In my page one piece of code is there as "oapagecontext.forwardImmediatelyToCurrentPage(null,true,null);"
which is used to render back to the current page,but after rendering the dialog messages which i have defined in processRequest are not coming.
My issue is how can i retain that dialog message.

Hi
You can try and use guard conditions or check the table for data, if there is no data in the table the application will return an error message.
Jarrod Williams

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd.After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality?

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd. After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality? or any other exporting alternatives?

Hey Z,
Thank you for the tip on exporting by media browser (large) from imovie. But of course, if it's not one thing it's another. Now that I figured how to export a large file from imovie, I have an idvd issue. I followed the instructions for burning from idvd and changing the encoding to professional quality and the burn speed to x4, but I am receiving an error that states the following,
Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
Project:
- total project duration: 79:04 minutes
- total project capacity: 4.327 GB (max. available: 4.172 GB)
Menus:
- number of menus in project: 1 menus
- total menu duration: 0:39 minutes
- total menu capacity: 37.370 MB
Movies:
- total movies duration: 78:25 minutes
- total movies capacity: 4.291 GB
I have searched in the idvd forum for similar issues and I am stumped at this point. I have tried deleting the encoding assets and re launching idvd with the changed preferences, and still the same error. I know you mentioned something about free hard drive space available, and I have very little left. 4GB to be exact due to massive hours of non-edited footage. I am not sure if this is why, but I do not recall ever needing free space to burn memory onto a separate dvd. I would be more than happy if I am wrong, and it would be a quick fix. Otherwise, the technical nightmare continues. It's all a learning process and your expertise is greatly appreciated! Thanks in advance.

PE7 - stop video from running after rendering text titles

Hi gang,
When I add manual "sub-titles" aka text titles to my videos, it works best when I render them as I'm going along with the ENTER key. That's fine but the video then wants to KEEP start playing from the start and that's driving me bananas. Can I turn this off?
Sorry, if this has been mentioned before.
cheerio
Petey

Hi Hunt,
Indeed, I would never want the video to playback automatically after rendering.
In PE7, it was exactly where you mentioned.
BTW - rearranging menus is part of the neverending game, that drives us all constant upgraders completey bonkers!!! Just like how AVI export dissappeared and reappeared into SHARE in PE 7. What a nomad! hehe
cheerio!
Petey

Red rendering line in timeline turns green after rendering but then reappears.

I''m a new user of Premiere Elements 10 and relatively new to video editing. My system info is: 2010 Mac Pro quadcore 2.66 Ghz with 12 Gigs of memory, NVIDIA GeForce GT120 512Mb running Lion 10.7.3. The red rendering line in my project turns green, as expected, after rendering but then reappears red after I close the project and reopen it. The project is saved regularly after rendering and everything works normally. No changes are made to any clips and as I stated the render line is green when the project is saved and closed. Any ideas what I might be doing wrong. Thanks in advance.

Thank you for that information. It kills about all of my theories.
Something is keeping PrE from seeing the links that it created to the Render Files, so PrE cannot find them - the link is dead.
I know so very little about Mac's, that I cannot even imagine where to begin. Maybe a Mac-user will drop by, and have an idea, and then we both will learn something.
Wish that I had more to offer, but good luck,
Hunt

Audio delay after rendering

Hello,
I'm a YouTuber from Poland who puts on my channel movies (named commonly gameplays) from variety of games. I rendered about 250 gameplays using Premiere Pro CS5.5 and CS6. Except for the raw video from the game, I also render my gameplays adding the video from internet camera and sound of my voice from TeamSpeak (material from the game, camera and teamspeak are recorded separately).
Recently I encountered a very wierd problem with my Adobe Premiere Pro CS6 - audio from the game is delayed after rendering movie. My voice is rendered as it should be with no delays.
Everything was fine earlier, I had no problems! And I haven't changed (consciously) anything at all im my Premiere Pro CS6 settings nor in my hardware. What is more important, when I render only half of the sequence or some part, audio is okey and there are no delays - therefore this excludes a hypothesis about beeing something wrong with my recording settings. It seems that is happening only when I render video from the beginning...
It may be important to say, that normally I record all videos with MSI Afterburner but recently I installed FRAPS on my computer. And than this problem came out. I have no idea how that may be related but it's just an observation. After instaling FRAPS I had another problem with memory paging file - games were closed when I recorded with MSI Afterburner due to insufficient virtual memory. Never had this problem either. I uninstalled FRAPS, reinstalled MSI, installed FRAPS again and now I don't have that problem. Another weird thing going on...
Edit
When I close Premiere Pro CS6 I receive a message that Adobe Media Core CS6 stopped working... may it be related?

Tammy,
If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
Glad that you got things toned down.
Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
Good luck,
Hunt

Missing videos after rendering

Hello!
I'm a newbie with After Effects.
I have the following problem: I have a After Effects Project file. In the folder Media Holders there are files with names MEDIA HOLDER 1, MEDIA HOLDER 2, etc. How do I replace them with my files? With right-click option is not available "Replace Footage" option. I use Set Proxy->File and on preview I see my video, but after rendering there is no my video.
Regards!

Oh, thank you very much. I will try it soon

Strange problem after rendering!

Hi guys , could you help me please? my system is Premiere Pro CS3, Win Vista32, 2gb Ram , integrated ATI xpress 200m with 128mb (with the last drivers), core2duo 1.8.
My problem is the following: after importing an AVI 640x480 30fps clip shot with my sony digital camera t20, i add it to the timeline, i play it and it works fine but right after rendering it , it jumps and flick. It also plays fine with windows media player so i was wondering why !!?!??
Are my setting of the project correct? I used DV NTSC 48khz project, but dont think that is something about these settings right? could it be main settings of premiere? i also read that some people had problems using the same graphic card 200m with premiere and vista,could the problem be connected with it?
thanks in advance if you can help...

No. Sorry. I have seen video shot on the same camera at 24fps and at 30fps and the difference was barely detectable. Both scenes were lit the same and shot the same other than frame rate. If we slowed it down it was detectable. Once played on a 20' screen it was a lot more evident, however. When the footage took up my entire area of vision, then the stuttering of the slower frame rate was easier to see. But on a smaller screen, no.
The "video" look is caused by a lack of depth of field and a sharper contrast, both of which should be addressed during production, not post. Just slowing the frame rate just isn't enough to make it not look like video.

Artifacts created after rendering

Hi,
I'm using Premiere Pro CS3 to edit my animation movie.
When I was using my old computer everything worked just fine, but when I copied the project to my new computer I noticed that after rendering, some artifacts were created in some of the shots (the artifacts do not appear in the original files just after rendering).
I installed premiere again but that didn't help, also my graphic card driver is the most updated.
Anyone know what can be the problem?
Thanks.

That helped some but I still think I have some setting not right? I just upgraded to 6.0 and a new computer and just started having this porblem. I'm running an oracle with a ton of ram somewhere around 60 and really good graphics card I'm really surprised that I need to wait for a minute or 2 for the yellow render screen to go away and show my video again? Not sure just kinda quarky I think

Weird glitches after rendering

Dear people,
I did recently huge (for me) step from PRE 3.0 to PRE 8.0 (I hadn't know, there were 9 Version). Anyway, I had in my first video some weird artefacts after rendering my video, and I don't know, how to fix them. (With 3.0 I hadn't such problems, even if I used it already ca. 3 years for many similiar projects).
You can see this glitch between 0:59-1:10 of my video in the upper right corner.
http://www.youtube.com/watch?v=pp40ZjZ_lQ8
I tried it with various configurations, but it had always just various glitches. The youtube video was directly uploaded from PRE, and its quality is much more better than the glitch-full videos I exported as files. Do I do something wrong?
To my PRE project: it contains a video and many animated text layers. In the PRE preview, before rendering, everything looks good, but the rendering disappoints me :-)
Actually I wanted submit my video to some art video galleries, but I cannot since it's still a little bit buggy.
I would highly appreciate any help!
Thank you, people, in advance,
Merzmensch

Well, perhaps this was one of some differences to my previous videos: I usually use my Sony camcorder, but this time I used my digicam Ricoh K8. The video to this camera is fully incompatible with PRE (even if it's an AVI - I worked with another cameras before, but only with Ricoh K8 I discover incompatibility to just every video cut software), so I converted it through VirtualDub (using also MSU Cartonizer for special effects). As far as I cam recall, I converted it with Helix YUV codec, which I often use, because PRE 3.0 hadn't compatibility problems before.
About settings of the project, which details do you need exactly? I actually used the default settings. Here I did the screenshots of every part of Project settings:
http://s234.photobucket.com/albums/ee240/kosmopol/PRE%20settings%20Takahashi/
(Sorry, it's German version, I hope they haven't shuffled the settings) :-)
I have a feeling, that the problem is not with video footage, but with some PRE settings, since you can see in the glitch both levels: video and text together. Perhaps rendering failure?

Color linies after rendering

Hi
I have a good video clip with a horisontal sharp transition from blue to red. Then i apply Motion to the clip ( Scale 110 % ) After that I render the clip.
After rendering there is a thin green linie in the transition from blue to red.
Anybody knows how to get rid of this green linie ?
The clip mentioned above is a test clip which i have made. When I use Motion to my clips there are green or red shadows in the color transitions.
Hope for a helping hand - thank you

It's your monitor, computer monitors can not be relied on for color accuracy.
Try setting RT to Unlimited.
Put all your animation on V2, put a Shape (Generators > Shapes > Square) on V1. Make the Square the size and color you want. Before editing it into the Sequence, in the Viewer window, top left, enter the duration you need. This will be more stable with coloring.

Audio problem after rendering!

Hi everyone! I am having a problem with sound in my project after rendering. I am using Adobe Premiere CS2 , and in Audio track 1, I have someone speaking, and in track 2 I have backround music. When I play it back in the window, together it sounds perfect. After rendering, the voice becomes very crackly and distorted. I have tried rendering just the voice without the backround music, and it sounds perfect. It seems the addition of backround music is causing the distortion to the other track. I have tried rendering the backround music seperately and adding it in, but still the problem persists. I adjust the music so that when the kids are talking, the music dips down, and when they are not, I leave it at it's normal level. HELP..I am losing my grip on this one! Thanks so much....Tammy

Tammy,
If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
Glad that you got things toned down.
Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
Good luck,
Hunt

Media Offline after Rendering

Been having an issue with multiple computers using Creative Cloud. After rendering the project all the media goes offline. I have to restart Premiere to get media back.
Any thoughts?

Hi Jonathon_H,
Thanks for all the information.
As you mentioned that it is not happening after the update but in case if it happens again, try to clean the media cache files which are situated on the below location:
"C:\Users\username\AppData\Roaming\Adobe\Common\Media Cache" and "C:\Users\username\AppData\Roaming\Adobe\Common\Media Cache Files".
Please update if all goes well.
Happy Editing!!
Regards,
Vinay

Bad quality after rendering

Hello guys.. why my video is having a bad quality after rendering? as you can see on this snapshots. the unrendered one looks great and sharp. but after rendering the quality is changing...
Ive tried to scaling to sequence but after rendering its going back again to poor quality..
pls help me guys! thanks
Before
After

Jruzz wrote:
ok ill try this and get back to you.. thanks man.. really
Perhaps you were unaware that Christina is a woman?
Patrick

Audio skips after rendering

Does anyone know how to correct audio that skips after rendering? The video is fine and the audio matches up to the video but the audio skips as though it is going in and out. The movie is about 2 hours long and the first few clips were fine but now it is becoming a problem. I rendered both the video and audio at the same time then I went back and rendered only.....mixdown to see if I could get it to work......no luck. Any help would be greatly appreciated.

Tammy,
If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
Glad that you got things toned down.
Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
Good luck,
Hunt

After Rendering

Similar Messages

Maybe you are looking for