After ssd has been installed

Hi,
I had recently installed Samsun msata 500 gb SSD on my GE60 0ND. I could not follow the procedure as my bios had no RAID option to select. I had to take off my standart hdd and run the recovery on my ssd. So far everything works great.
Now I'd like to connect the old hdd on its slot and use it as backup drive. In bios I see that 1st serial ATA remains empty (there was the old drive before), 2cond serial ATA is for the SSD, 3rd for the slimtype DVD.
I'm afraid if I plug the old hdd it will be used as a system drive again as it will take the 1st serial ATA again...and that's what I really don't want to happen..
Please help with any suggestions how to make sure my old drive will be not system one?
thanks in advance

You don't need to care about those three serial ATA. You only need to move to "Boot">>change the boot mode select to "LEGACY" >>
press f10 for saving the setting >>press "del" for entering bios again >>move to "Boot">>change the ssd as boot option #1  under "Hard Disk Drive BBS Priorities".

Similar Messages

  • Uninstalling 2982791 ; is it OK to uninstall it *after* 2984615 has been installed?

    Microsoft Security Bulletin MS14-045 - Important 
    "Microsoft strongly recommends that customers who have not uninstalled the 2982791 update do so prior to applying the 2993651 update."
    Most of our PCs are set to automatically install updates.  If the 2993651 update has been automatically installed *before* the 2982791 update was removed, should we still remove the 2982791 update?

    Hi
    The update 2993621 replaces the expired 2982791 update. They also say:
    Customers do not need to uninstall the expired 2982791 update before applying the 2993651 update; however, Microsoft strongly recommends it. Customers who do not remove the expired update will retain a listing for 2982791 under installed updates in Control
    Panel.
    Its your choice.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Why does maverick show download on purchases after it has been installed

    installed maverick os from app store, completes download, after restart, when i go back into app store purchases, it has download in the right hand side column, anyone else had the same problem.

    bampy 1 wrote:
    Hi, no its not there, i have tried about 3 times, press download in the app store, it takes a couple of hours to download, says its downloaded, then says installing, which takes about another 2 hours, asks to restart, when it restarts the wave desktop is on the mac, but when you go back into app store, it has the download prompt again.
    As it would with any App once you have purchased it.  Once you buy something in the App store it is linked to your AppleID - you can redownload as many times as you wish or need to, install it on other machines without paying again, restore a machine as needed without paying again, and so on.  The "buy" changes to "download" since you will not pay to re-download anything once you have boutht the license for it.

  • Best way to downgrade to SL after Lion has been installed on MBP

    After 2 days of reading multiple posts about iMovie on Lion and trying to make iMovie work on my MBP 2.4 Intel Core i5, I am giving up on Lion.  Snow Leopard, I want you back.
    I've already backed up all of my files, but before I reinstall SL, I would like to retain my Windows/Parallel configuration. I don't want to go through the lengnthy process of updating Windows and I am guessing there is a way to do that, but I am not sure how.  Please help if you know how.
    Thanks

    tvdowntown wrote:
    I seem to be unable to "boot(?)" from my original SL disc.  However, I can insert the SL disc and the "install Mac OS. app" does appear.  Is it as simple as clicking on the install icon and my old SL would be reinstalled?
    If you have followed all the instructions in that post... then yes just Click.
    tvdowntown wrote:
    Thank you.  I have been following that thread and I still cannot figure out what will happen to my Windows/Parallels configuration.  Will it stay intact or must reinstall Windows as well?
    My understanding is that you will have a Fresh Install of SL and you will need to Run Software Update (to bring it upto Date...... so to speak)
    and then Install any 3rd party Apps, such as Windows, etc...
    Just one note based on experience... If you have a Lot of Updates after the Reinstall, (and you probably will...)
    it would be best to update one at a time and Not all at once... and then leave your Machine running for a couple of days or so... if you can.
    Hope this helps, Cheers.

  • Making a bootable dics after Lion has been installed

    How do I make a bootable dics of the Lions after I have installed it on my system. I could not fine a .dmg file anywhere or a install Mac OSX 7 app.

    Apparently, you failed to save a copy of the install app to another location and the installer blew itself away after installing, which is normal behavior. You'll have to DL the installer again. When that's finished, see http://macnix.blogspot.com/2011/07/make-bootable-mac-os-x-lion-usb-flash.html for details on making a bootable disc.

  • Change partition sizes after windows has been installed

    After I have installed windows onto my mac and have created the partitions, can and how do I change the size (in terms of memory) of the partitions without reinstalling all information?

    Hi and welcome to Discussions,
    you can use WinClone for this http://www.twocanoes.com/winclone/ and in here http://www.twocanoes.com/forums/viewtopic.php?t=515 you find a how-to.
    (Topic: My current Windows partition is the wrong size, and I want to make it larger. How do I do this?)
    Other people have used CampTune http://www.paragon-software.com/home/camptune/ successfully.
    Prior to doing this you should make/have a backup of your OSX and Windows files for safety.
    Regards
    Stefan

  • HT204266 How does one find out how much one paid for an app after it has been installed?

    It would be far more useful if the word INSTALLED also dispayed either the word FREE or the
    amount paid for the app; e.g. INSTALLED FREE or INSTALLED $2.99.   Some of the free apps display
    the word Free within the app icon, but not all free apps do so.

    Try Account Information on iTunes, then Purchase History.

  • TS4002 impossible to connect to icloud or mail since lion has been installed. keeps re-arranging for ever. What can I do?

    HI,
    I have insrtalle CLOUD this morning on my leopard (latest version) then after icloud has been installed I have downloaded lion from internet and installed it: sice preference system is quitting and impossible to retrieve my emails... What should i DO?
    Best pp60

    HI,
    I have insrtalle CLOUD this morning on my leopard (latest version) then after icloud has been installed I have downloaded lion from internet and installed it: sice preference system is quitting and impossible to retrieve my emails... What should i DO?
    Best pp60

  • HT3986 How do I start up Mac after the Windows has been installed.

    How do I start up Mac after the Windows has been installed? And after I installed the Windows, my Audio is gone. How can I get it back?

    Welcome to the Apple Support Communities
    1. To boot into Mac OS X, press X key while your computer is starting.
    2. Install Boot Camp drivers

  • Is there anyway I can find the key after the program has been installed?

    Is there anyway I can find the key after the program has been installed?

    One the product has been installed you cannot locate the Serial Number on the installed copy. Though we recommend you register your product on Adobe.com, by Going to Help-- Registration.
    Thanks!

  • How do I add Chinese local after Solaris OS has been installed

    How do I add Chinese local after Solaris OS has been installed. right now on my
    /usr/lib/localedef/src I only have iso_8859_1
    Thank you

    Welcome to the Apple Support Communities
    1. To boot into Mac OS X, press X key while your computer is starting.
    2. Install Boot Camp drivers

  • After years of no problems I can't print photos. When I select print I get the message "There are no themes located. Until at least one theme has been installed this feature will be unavailable.  What are themes? How do I install them?

    After years of no problems I sddenly can't print photos. When I select print I get the message "There are no themes located. Until at least one theme has been installed this feature will be unavailable.  What are themes? How do I install them? Why has this problem suddenly arisen?

    Re-installing does not affect your Library in any way. You don't delete it, only the app.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
    Regards
    TD

  • Firefox shows 1 add-on has been installed message every time I start after downgrade

    After downgrading from FF4 to 3.6.16 I get a dialog every time I open FireFox telling me that 1 new add-on has been installed.
    I assume it has something to do with the downgrade process since I haven't recently installed any add-ons.
    How can I make this prompt go away?

    I found a discussion and some potential solutions for this problem on SuperUser.com.
    [http://superuser.com/questions/37548/firefox-3-5-2-displays-installed-addons-on-every-startup-is-this-normal Firefox 3.5.2 displays installed addons on every startup, is this normal?]
    The consensus seems to be re-install firefox. However, that didn't work for me.
    What did work was this: If you look carefully (it's subtle) one of the add-ons will be a slightly different color in the dialog that comes up. That appears to be the problem one. Uninstall that add-on and re-install it. That worked for me.

  • My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.  I have tried re-installation but still have the same problem.  Could you please forward a solution to this problem.

    My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.
    I have tried re-installation but still have the same problem.
    Could you please forward a solution to this problem.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Office 2013 KMS Activation Issues When Outlook 2010 Has Been Installed

    Hi Everyone,
    I have been looking everywhere for the answer to this question. I have been setting up a KMS server host for Office 2013 on Server 2012 R2. The issue I have ran into is that all of our computers currently have Office 2010 installed. Our Office 2013 KMS server
    is installed on a different server than the KMS server that activates Office 2010. (Different Virtual Machine) If Office 2010 has been installed the KMS server will not activate with the upgrade to 2013. Troubleshooting below:
    1. Leave office 2010 installed and simply click upgrade - did not work.
    2. Completly uninstalled Office 2010 and tried ospp.vbs /act and ospp.vbs /act - did not work.
    3. Completly uninstalled Office 2013 with all other versions of Office 2010 uninstalled. Did a fresh install of Office 2013 after a reboot and verified working.
    Can anyone explain to me either why this is happening as well as a solution. I realize that I have a work around right now but it takes some time.

    So, you have 2 KMShosts?
    Host_A is KMShost for OFF2010
    Host_B is KMShost for OFF2013
    Are both hosts published in DNS?
    (check with: nslookup -type=any _vlmcs._tcp)
    Clients can resolve and connect to both hosts?
    Or are you using static KMS location (do you manually configure your KMSclients to a specific hostname or IPaddress)?
    Typically, a KMSclient will perform discovery via DNS lookup, and will try each KMShost until success occurs.
    Possibly, when you installed WS2012R2, you chose ADBA instead of KMS ? (check the VA role on this server to confirm the mode)
    You can check upon the KMShost, execute: cscript slmgr.vbs /dlv all
    Another option, might be for you to co-host OFF2010 KMS and OFF2013 KMS upon the same (new WS2012R2) server, and de-commission the old KMShost function including removal of the DNS record for it. (Assuming this is consistent with your plans)
    Example for OFF2013 ADBA:
    http://blogs.technet.com/b/odsupport/archive/2012/11/07/how-to-setup-active-directory-based-activation-host-for-microsoft-office-2013.aspx
    Example for OFF2013 KMS:
    http://blogs.technet.com/b/odsupport/archive/2012/11/07/how-to-setup-kms-activation-host-for-microsoft-office-2013-on-windows-server-2012.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Maybe you are looking for

  • Text elements in Webdynpro for Abap

    Hi, Can anybody explain me how to create text element in webdynpro for abap? Regards, Soumya

  • Just received my 3th iPod from mail-in repair, and afraid to use it.

    I bought my iPod in june 2005. I remember having trouble putting music on it for the first time. After i had put some songs on it RealPlayer showed that there was memory taken, but didnt show any songs on it. I dont remember how, but i solved it and

  • Vertical alignment in xhtml

    Im having problem with getting text and object to vertical align in div's. I cnat get them to position as i want them without position them with either margin/padding og using absolute position... Anny advise ??

  • Is the slide show suppose to work in iweb?

    Hey guys...i know this might seem dumb, but i've scoured the forums for an answer and there doesn't seem to be a problem like mine. so here goes. When the slide show is filled with thumbnail pictures and then you go to click on the pictures. Should a

  • I need to re-install Lion, where do I re-download the Lion installer?

    I had a HD issue (my MacBook Pro, Model A1211 would not boot) and I did not have a Lion Recovery Disk, so I had to erase the HD and load Snow Leopard. Now where do I find the Lion installer and download it?