After up dating iphone3 cannot get any sound on receiving calls or messages

After updating my iphone3 cannot get any sound on receiving calls or text does anybody no how to rectify this problam ?

I have been having this issue as well and have been looking online for possible solutions to the issue of the iPhone not receiving phone calls or text messages.   The solution for me was solved when I turned off the LTE service, forcing the device to use the 4G network.  Apparently, my location was just far enough from the LTE tower that calls to the phone were not going through, regardless of the signal strenght showing on the device.  The LTE iPhone will always look for the closest LTE town which may be further than the closest non-LTE tower and as a a result, the signal drops.  I would suggest contacting your service provider and have them locate the closest LTE tower to your location to determine if this is the cause of your issue.

Similar Messages

  • I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.

  • I have downloaded Fiefox 7 for my laptop running Windows 7. Now i cannot get any sound from web content. ( I can still get sound using Google Chrome !!) Any ideas ?

    I downloaded Firefox 7 and now cannot get any sound when playing web content. I have reinstalled but still no joy. When I use Google Chrome for the same useage, it plays sound fine.
    Any ideas ??

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
      2. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
        Follow the prompts and install it.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins  
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.

  • I have a line 6 UX1 interface, garageband is seeing it but i cannot get any sound to play

    I am new to Mac, I have a Line 6 UX1 interface and am struggling to make it work on garageband. I can choose it but cannot get any sound to record or play through the mac

    Fat Bob Blues wrote:
    When i play the guitar the sound level bar on the instrument bar moves slightly but no sound can be heard
    http://www.bulletsandbones.com/GB/GBFAQ.html#usecomputersspeakers
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Cannot get any sound when playing .avi files

    Hi All
    I am running QT version 6.5.3 on Mac OS X 10.2.8 and cannot get any sound when playing .avi files but the picture is perfect.
    I have installed the following: M-Peg 2 playback component, AVI Components and AC3 component.
    Does anyone know if I am missing anything or how I can fix this?
    Many thanks
    Garry

    Download and install Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/

  • I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac.

    I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

    I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

  • I cannot get any sound on my iphone unless I have headphones in any suggestiosn on how to fix this?

    I cannot get any sound on my iphone unless I have headphones in any suggestiosn on how to fix this?

    From the Community Ettiquette page found here.
    Post only technical support questions and answers, unless otherwise noted.
    Be polite, constructive and stay on topic.
    Search for questions similar to your own before submitting a new question to the community.
    Try item 3, I feel certain you'll find a solution.

  • Hi, when I download wmv video files, I cannot get any sound. Youtube videos work fine but not wmv files? can somebody help please

    Hi, when I download wmv files on my MacBook Air I cannot get any sound on the videos. Youtube videos work fine but not wmv files. Can anybody help please?

    Install Flip4Mac which allows you to play wmv files.

  • I cannot get any sound from my imac

    Hi
    I cannot get any sound from my imac either itunes or alert sounds I've checked that everything is turned up and not muted
    thanks in advance

    If a simple reboot doesn't fix it, try resetting the SMU.
    Depending on which iMac you have, one of these links will explain how.
    Resetting the SMU on a G5 iMac:
    http://support.apple.com/kb/HT1767
    and on a Power Mac G5 :
    http://support.apple.com/kb/HT1436
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379

  • Cannot get any sound forn iPod nano 3 on my JBL iPod dock, it used to work fine, but I haven't used it for awhile.  Appreciate any suggestions for non technical grandmother. Thanks

    I have an older iPod nano.  I have a JBL iPod dock that worked fine with this over a year ago, but I tried it recently and I cannot get any sound to come out.  I am a technically challenged grandmother so this stuff does not come naturally.  Help would be appreciated.  Thank you

    Wow, thank you so much!
    Turns out there was a topic on the forums there with guy having same problem and they linked him to topics that saved his iPod too.
    Thank you so much, it works now

  • HT4352 I cannot get any sound on my iPad when home sharing, yet do have sound when playing iTunes that I have loaded, please help?

    I cannot get any sound on my iPad when using the remote app for home sharing, yet do have sound when I play iTunes that I have loaded on my iPad, please help?

    You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • My computer says my speakers are enabled, however i cannot get any sound

    I am unable to get any sound from the speakers on my computer. I would like to know how I can fix this. I have gone into the sound settings and it says everything is functioning properly

    Get your Product Number by pressing Fn + Esc key or check the Service Tag attached to bottom, may be under battery.
     Go to the link below.Enter your Product Number .After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.Go into Control Panel,Programs & Features-Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I cannot get any sound..it says my sound card is not working properly...how do i fix this.

    HP PC 2000 notebook, windows 7 operating system
    can't get any sound..says the sound card is not working..how can i fix this...

    You need to contact Adobe for you billing problem this is a user four not adobe customer support.
    For your Photoshop Problems this user community may be helpful. 
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • I cannot get any sound from my ipad. I tried youtube, pandora and. Iseos and none have any sound. I have checked the control panel and the sound is "on". Any suggestions?

    I Am not getting any sound at all from my ipad. I have checked the control panel and it says the sound is "on". Any other suggestions? It has worked just fine in the past.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Cannot get any sound from william hill radio

    i have logged onto the william hill radio site but cannot get any sound

    sorry to hear about your problems. Try running Audio MIDI, see what's it's set it for both the line out/digital out. Holding down the Alt Key (next to the space bar) gets you a list of all the input and output devices on your macbook pro. Also, see if accessibility is turned on under system preferences.  Other than that, I can't say. if you have wifi problems, see if there's an update for it (airport?) or see if you can change  Wi-ifi channels on your printer
    well, I tried anyways
    JB

Maybe you are looking for