After Update cannot find Wifi only Wlan

Hello,
I made an update on my IPad2 and now the menu "WI FI" is gone and instead there is now "wireless".
I hope anybody can help me because I can't get to the internet.
Thanks

The video options are greyed out because you probably have your iPod set to manually manage your music.
If you turn off manual sync of your audio, the video options will become selectable.
As far as I understand it, you need the coupon that came with the iPod to download the exclusive U2 video for this model iPod.

Similar Messages

What benefits are there to iOS 6 update on a "wifi only" iPad 3?

I am so glad I did a little research first before following through with an the iOS 6 update on my 5 day old 64 GB iPad 3 +wifi. So far, I don't have any confidence there is any improvement on a "wifi only unit", even Siri falls short of expectations in comparison to the basic dictation software already included in iOS 5.1.1- and I am afraid to loose the excellent dictation software. Additionally, it appears the iOS6 update could cause my wifi to become inoperable. Not a risk I am willing to take after dishing out 850.00 of hard earned money to have my iPad deemed useless and becoming frustrated.
Until, there is an actual benefit or improvement to the current iOS for a "wifi only" unit I see no reason to change to iOS 6, unless of course there are some improvements in updating on a wifi only unit that I am not aware of? I really wanted to update but too worried after reading the trouble people are having. Can someone advise what benefits there are in updating to iOS 6 on a "wifi only" new ipad3? I am not sold on Maps (turn by turn doesn't work for wifi), or on Siri to make the change.
Can someone tell me what benefits there are to updating the new iPad3 which is wifi only?

Nobody here will convince since you have already made up your own mind. That's fine. It's your choice. If you aren't comfortable updating the iOS - don't do it.
I have a WiFi only new iPad and I have never had any issues at all - with anything concerning WiFi connections or networks - as long as the network was dependable. I am using my personal MIFI hotspot right now and it works great, here are the features that iOS will provide for you If you decide to make the update.
iOS 6 features and capabilities vary between devices, with some features available only with certain devices and models.
iPhone
iPad
iPod touch
iOS 6 feature
3GS
4
4S
5
2nd
generation
3rd
generation
4th
generation
Maps: Flyover
✓
✓
✓
✓
Maps: Turn-by-turn1
✓
✓
✓4
✓4
Siri2
✓
✓
✓
Facebook integration
✓
✓
✓
✓
✓
✓
✓
Shared Photo Streams
✓
✓
✓
✓
✓
✓
✓
Passbook
✓
✓
✓
✓
✓
Camera: Panorama
✓
✓
Camera: Snap stills while recording
✓
FaceTime over cellular3
✓
✓
✓
Phone: Reply/Remind
✓
✓
✓
✓
Do Not Disturb
✓
✓
✓
✓
✓
✓
✓
Mail VIPs
✓
✓
✓
✓
✓
✓
✓
Safari: Full screen view
✓
✓
✓
✓
✓
Safari: Offline reading list
✓
✓
✓
✓
✓
Guided Access
✓
✓
✓
✓
✓
✓
✓
Made for iPhone hearing aids

After updating 8.1 , wifi still randomly disconnect sometimes. It never happened to me when i had iphone 4. That's really hard to accept.

After updating 8.1 , wifi still randomly disconnect sometimes. It never happened to me when i had iphone 4. That's really hard to accept.
Is it worth 900 dollars for a smartphone that has so many issues ? After 3 updates? After 1 month? I wasted 2 gb of mobile internet cause of ios 8.
And battery is terrible.

same here, iphone 6 plus 64 gb.
additionally in 5 ghz networks the wifi connection is very slow or there is no data transfer possible ( the wifi icon is already there and in a good status) other devices hasn't any problems in that network

Where can i find the build 10041 as windows update cannot find it?

Hi all. I have an Acer Aspire E1-531 and am running Windows 10 Technical Preview on a 64-bit system. I am stuck on build 9926 and on the fast option for downloads in Windows Update yet I have not been offered the build 10041. Or that Windows Update cannot
find build 10041. Where can I go to download and install the build myself? Thank you in advance.

Hi,
If you need
Additional Languages for Windows 10 build 10041 - ESD - ISO
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/additional-languages-for-windows-10-build-10041/c26555a2-6e0e-415b-b47b-0c46e60f7f06
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Software update cannot find installed App's in sub-folder

Hi All,
I have same kind of problem - I created folder called "iLife' 11" and moved there all App's which belong to this package. As soon as I did this Software Update cannot find anything. For example Apple released iPhoto' 11 (9.1.1) update and Software Update did not find it until I moved it back to "Applications".
BTW I have same problem with Adobe App's. Adobe update did not see Photoshop which has been moved to sub-folder.
My question is DO I have any chance to put App's to sub-folder and get them automatically updated by Software update? IF so, what should I do?

All sub-folders located in /Applications/ not in /Users/username/Applications. Actually /Users/username/Applications/ is empty on my mac.
What I trying to have is sub-folder (for example called Photo where I will have all applications for working with images (Photoshop, Nikon Scan, SilverFast and so on) in one locations or iLife' 11.
I took this idea from folder "Utilities" I can put App there and it worked and updated without any problems.
As far as I understand this problem (from Unix point of view) is a PATH problems. Software Update cannot find App in the folder which not listed in PATH.
If I create link (allies) for application in /Applications/ folder it will updated.

After decommisioning our server Reader update cannot find path so I can neither uninstall nor install

We have recently decommissioned our server and are using dropbox. Updating Reader failed because it cannot find the path to the server, as it isn't there anymore but I cannot find a way to uninstall or update.

If you are on Windows you can use this tool to uninstall http://labs.adobe.com/downloads/acrobatcleaner.html
But you may still encounter problems when trying to reinstall; make sure that no entries point to your server on these registry keys:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

Cannot find wifi connection anymore

I purchased my iphone this past March and everything has been working fine until now. Last Thursday I was on wifi downloading an app that was about 12MB. After making the purchase, I was disconnected from wifi and could not proceed with the download.
I continually tried connecting, but could not find the network. It is now Monday and after resetting the network settings, trying the airplane mode trick, updating to the latest version, and restoring I still cannot find the network. I've tried on multiple networks too and still no luck. I tried phoning Tech Support but they said I'd have to pay for phone support. Any suggestions? hardware problem? Have no idea who to send it to if needing replacement. No Apple store near by either.

So I have two iphones (3G and 3GS) in the family, an ipod touch (1st gen), an IMAC, AppleTV, MAC Book and a MAC Book Pro. An new dual band Apple Airport Extreme and dual Apple Airport Extreme.
The computers & Apple TV connect just find to my network (security is WPA/WPA Personal). The iphones and ipod touch cannot connect worth a hoot. My neighbor has a Belkin network (no security) and both phones and touch connect just fine. I am totally flummoxed. I have tried resetting the network settings on the iphones but to no avail. The only time the devices connect is when the phone or touch is literally within a foot of the base station.
any suggestions?

Exchange 2010 Rollup 2 SP3 update cannot find installation package exchangeserver.msi file on SBS 2011... NEED HELP!!!

Hello,
I am running a windows SBS 2011 standard system and there was currently an update for Exchange 2010 Rollup 2 Service Pack 3 and it keeps failing. It says that it cannot find the installation package (exchangeserver.msi) and it is looking for it
in E:\Software\Exchange2010-SP3-x64\ folder but there never was this folder. There is only an Exchange2010-SP3-x64.exe file.
The only exchangeserver.msi file that I find on the server any where is in C:\ProgramFiles\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1 but it won't accept it (says not authorized for this update or something alike).
Please help. It is currently causing issues with email. Some of the features are not working because it says exchange is currently under maintenance.
Any suggestions would be greatly appreciated. Thank you.

Susan you are correct: After I installed Exchange 2010 SP3, I deleted the msi just to "clean up' my hard disk... While trying to install Rollup 2 for SP3, the installer is trying to find it. I downloaded the installer, used 7-zip to get
the msi and I pointed the installer to it when asked.
The installation failed 3 times...
NOTE: I was using WSUS to install the Rollup: I downloaded the Rollup installer and I executed: I could see where the installer was hanging up! First it asked me to stop an SBS service and something else (sorry I do not remember), I stopped
the services and installation continued. Then it asked me for more files from the SP3 installation which I found on the installation folder that I created with 7-zip. I copied to the path that the installer was looking and installation finished
(finally!)...
NOTE 2: If you have any firewall appliance that denies Internet access to un-authenticated requests, you better turn that rule off because the installer accesses the internet (not sure why - probably for Dot Net assemblies)...
Susan THANKS for all your help to the community! You have helped so much!
All the Best
Constantine

Playbook cannot find WIFI networks

Hi, I have a new Playbook 16gb wifi and the wifi isn't working. Essentially what happened was after I completed the initial setup it prompted me to install an OS update after which the WIFI stopped working. I cannot connect to any network no matter the type a/b/g/n, the frequency, the channel or the mode. I have tried on two Netgear routers, 1 DLink and 1 iPhone (used as a hot spot). I have tried PBS using the actual button and the PIN but neither works. It just cannot find any networks.
I tried resetting to factory defaults but that has made the situation worse because I am now stuck at the setup screen with no networks to complete setup. I can't connect to the desktop software either because the installation hasn't completed.
Any suggestions would be greatly appreciated.
Cheers
David

Hello
Were you able to fix the wifi issue ?
I have successfully reloaded QNX OS on the Playbook using Desktop manager.
Version 1.0.7.2942 was loaded.
I still have the same problem, it is impossible to connect to the wifi network.
I have tried wpa2, wpa and wep , nothing works. I have tried at over 10 different routers. I tried with routers where other playbook wifi works well, but this one playbook won't connect, I always get the same error while trying to pair to the network, it doesn't event get to the acquiring IP address phase.
Thanks

HT1695 cannot find "wifi" on my ipad

I have an Ipad mini. My router is a linksys. Itunes says to sync my ipad with itunes but i cannot find the wifi tab on my ipad mini

Click on the Settings icon.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Suddenly I cannot find wifi on iphone 4s

I have an iPhone 4s with iOS 8.1.2.
I find myself abroad for a month. I have been using my iPhone normally for three weeks without any trouble. Suddenly yesterday, after having worked with it for several hours, it cannot find anymore the wifi of the place in which I am staying, even if all other people can still use it.
I already tried to disable the location setting and also to reset the original settings. None of these have produced any results. Can you help me?

Hi ff/medic,
To browse your music by playlist, look at the bottom of the screen in the Music app, you should see a Playlists button to click. If not, select the More… button.
You can find this and much more information in the iPhone’s User Guide -
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Thanks for using Apple Support Communities.
Best,
Brett L

After update, cannot send email via any accounts! Please help!

First of all, thank you for reading my thread.
After updating few days ago, I cannot send any email via any acounts. I have .mac email and yahoo email. But I still can receive emails. I have checked message borad, it said "Some members experienced difficulty sending .Mac Mail via computer email applications from 3:30 am to 6 am Pacific Time. Normal service has been restored." But mine hasn't!!! It has been almost a week!!
The erro message says "cannot send email using this mail server, please choose one of the following server and retry again"
My english is not very good, I hope you understand my question and any help would be appreciated, thank you again.

Thank you very much for your reply!
This is what I got:
PING smtp.mac.com (17.250.248.45): 56 data bytes
--- smtp.mac.com ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
PING mail.mac.com (17.250.248.152): 56 data bytes
--- mail.mac.com ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
It seems the problem is the server, but it has been many days, I don't think apple haven't had notice this.
What should I do next?

HT201210 After updating my iphone. Only the logo and connect to itunes on the screen.

After updating and system restore my iphone wont open. only the logo and connect to itunes on the screen.

Hello nicolajan,
Thank you for contacting Apple Support Communities.
I see you linked here from TS1275, that is where I would recommend you starting to troubleshoot this issue. Did you follow the steps in that article? If not, here is that link again and I would recommend following all of the steps outlined there.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If that doesn't resolve the issue, then you can move on to this article for more advanced troubleshooting.
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694
Regards,
Jeff D.

Cannot find wifi-menu command

I have a lenovo T430 laptop.
I made my usb stick into a bootable medium using YUMI.
Then I boot into arch linux 2013.05.01 from usb.
But I simply cannot find the wifi-menu command.
So what might be the reason for this ? Thanks a lot

https://bbs.archlinux.org/viewtopic.php?id=162725

Photoshop 7.0.1 updater cannot find Photoshop file

If you run the Photoshop 7.0.1 updater and it says it cannot find the Photoshop file(s):
1) Do a full uninstall and reinstall of Photoshop to fix any necessary components that may have been moved or deleted.
2) If that doesn't work, please call Adobe Customer Support at 1-800-492-3623 within the United States, or your local Adobe Customer Support office outside the United States. Please have your Photoshop 7 serial number and valid proof of purchase available when you call. Most likely your serial number has been used by a pirate and disabled.
For other installation problems, please try the instructions included in the updater README document.

If something funny happens when you run the updater (like a DIFFERENT installer runs), try this:
1. Delete all the files in your user / system temp folder, at this location. (USERID is your user login name, Administrator, guest, etc... )
C:\Documents and Settings\USERID\Local Settings\Temp
Local Settings is normally hidden, so make sure to show your hidden folders.
2. Run the Photoshop updater again, and you should be good to go!

After Update cannot find Wifi only Wlan

Similar Messages

Maybe you are looking for