After updating kernel and ZFS modules, system cannot boot
Starting Import ZFS pools by cache file...
[ 4.966034] VERIFY3(0 == zap_lookup(ddt->ddt_os, ddt->ddt_spa->spa_ddt_stat_object, name, sizeof (uint64_t), sizeof (ddt_histogram_t) / sizeof (uint64_t), &hht->ddt_histogram[type][class])) failed (0 == 6)
[ 4.966100] PANIC at ddt.c:124:ddt_object_load()
[*** ] A start job is running for Import ZFS pools by cache (Xmin Ys / no limit)
And then occasionally I see
[ 240.576219] Tainted: P O 3.19.2-1-ARCH #1
Anyone else experiencing the same?
Thanks!
I did the same and it worked... kind of. The first three reboots it failed (but did not stop the system from booting) producing:
zpool[426]: cannot import 'data': one or more devices is currently unavailable
systemd[1]: zfs-import-cache.service: main process exited, code=exited, status=1/FAILURE
The second boot also resulted in a kernel panic, but as far as I can tell unrelated to zfs.
After reboot one and three imported the pool manually.
From the fourth reboot on loading from cache file always succeeded. However, I it takes faily long (~8 seconds) and even shows
[*** ] A start job is running for Import ZFS pools by cache (Xmin Ys / no limit)
briefly. Altough I might only notice that because the recent updates sped up oder parts of the boot process. Did you observe a slowdown during boot time, too, kinghajj?
Last edited by robm (2015-03-22 01:21:05)
Similar Messages
-
After updating to Itunes 10.4, i cannot now connect to teh store or sync any of my devices, everything was working fine bfore, i removed Itunbes and re-installed same probloem, can anyone help? i am running windows vista
try to reinstall again. They had a message last night that there was an error, the download wasn't available for awhile, I was able to download and reinstall this morning.
I had uninstalled all apple products and tried to install but the download had disapeared till this morning. Worked after reinstall. -
After uninstalling iTunes and re-installing, I cannot download the update. I have Windows Vista.
After uninstalling iTunes and re-installing, I cannot download the update. I have Windows Vista. Should I un-install again, and if so, where are the instructions for windows vista?
Have you tried to use another browser?
This may help you out -> iTunes: Downloading iTunes for Windows using Internet Explorer -
After 'updating' the newest iTunes version, I cannot sync my iPod Nano! The 'old' version recognized and showed in icon to sync, but the newest version does not. Is there a way to sync the older iPods?
http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
Exception processing message 0xc0000013 after updating itunes and Quicktime
After updating itunes and Quicktime, every time I remove a CD from my DVD drives I get an error saying no disk exception processing message 0xc0000013 Parameters 0x759f023c 0x87f51934 0x759f023c 0x759f023c.
I tried doing a restore to a time before that update and that didn't seem to help. It just gave me different parameters.
I'm using Windows Vista and this is driving me nuts.
Any help would be greatly appreciated.I also have the same problems as you guys after installing Corel Painshop Pro X12. I went into the task list and stop the CorelIOMonitor process and then the problem went away. I found out that you can disable this from starting up using System Configuration tool via Start -> Run -> msconfig
. It's an interm solution untell they fix it. Maybe someone needs to notify Corel or Apple to fix this problem. -
After updating numbers and pages I can no longer copy multiple cells from numbers and paste and match style to pages. I used to be able to select multipule cells in a row (such as company name, address, etc.) then paste and match style on to a pages letter. I found the paste and match style option in the edit menu, however it will only work one cell at a time. Before the update is was working great.
For diagnosing purpose thy the procedure in a new user account and see if it works there. You create a new user account in the System Preferences > Accounts. If it works in the new account it is probably a corrupt plist file that needs to be deleted.
-
Re: after updating the app Flight Tycoon, I cannot access the game. Each time I click on the app it goes back to the main page.
Send a bug report. And wait for an update.
OR
uninstall and re-instal the game all over. -
After updating Firefox and Thunderbird from 8.0.1 to 9.0.1 I am no longer able to pin either application to the Windows 7 Toolbar (running Home Premium 64-bit).
I RESOLVED THE ISSUE. I uninstalled the converter. Re installed after a cold boot.
The sites that would not load properly: I did a ixquick search of the titles that wouldn't download and found them at another location. They then downloaded perfectly. from the new location -
Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.
All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...
-
Error after updating kernel 640U patch to 247
Hi Forum,
There are some repetitive errors after updating kernel 640U patch to 247:
======================================================
X Sun Feb 22 07:01:01 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X
X Sun Feb 22 07:01:08 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X
X Sun Feb 22 07:01:19 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c 2220]
X
======================================================
Please help.
Regards,
Agoes
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:53 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:55 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:56 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:57 AMHello Agoes,
You can ignore these error messages,these come when u upgrade the kernel to 246 or 247
Please refer to not 1239685 for more info
So no issues
cheers
Rohit -
After updating iTunes and iPhone 3gs AppleMobileDeviceService.exe has been taking over 50% of my CPU. When i attempt to sync my iPhone iTunes hanges on backing up. I have uninstalled all the apple software and reintalled it. This fixed the problem until QuickTime updated. Immediately following the update Apple...Services.exe went haywire agian. Any help?
Thanks wjosten. I've now been through all this, and there was a lot of old 3d party phone stuff to remove.
However, I have not progressed really. Any other thoughts on this please? -
My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help
Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.
-
DVD - bootmgr corrupt system cannot boot
Good afternnon,
the DVD cannot be used to run te set up - Vista Home Premium 64bit.
Once lunched a black screen shows only "bootmgr corrupt system cannot boot"
What I have to do? Is it possible to receive a new copy?
Thx
FD'Hi,
Can you test in another computer?
It seems this is related to your installation media. If so, it is recommended to try a good copy.
Alex Zhao
TechNet Community Support -
My mac mini v10.6.8 wont finish installation of update Yosemite and now im stock at boot Please help!!
Try stating in Safe Mode:
OS X: What is Safe Boot, Safe Mode?
Next try reinstalling Yosemite by:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
After updating my Iphone 4S to the newest operating system, I cannot get my phone to stay off when I turn it off. Has anybody got any ideas what to do?
Hello purplechemist,
I would be concerned too if my iPhone was not turning off. I'm not sure if you have tried this, but I recommend first trying to reset your iPhone:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists after the reset, I recommend restoring your iPhone. You can find steps for backing up and restoring your iPhone in the following links:
iOS: How to back up
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
I tried getting the update for my new iphone and now it is asking me to activate it again but won't let me, how do I fix this? I had started using it for a few hours and tried getting the update and now it won't let me activate the phone. I also can'
-
How to setup multiple Exchange accounts in Mail with the same username/password
Okay didn't see a place to ask a Mail question so I am placing this here. I work for a helpdesk that requires me to monitor 4 different email accounts throughout the day. They are all Exchange accounts. The first one setups just fine but when I go to
-
My app store icon. Disappeared
How do you bring back app store icon ? Some how it dis appeared
-
Oracle Linux 6.1 with grid failed config root.sh
Hi,when i installed oracle 11g Grid Infrastructure,exec root.sh failed. OS:Oracle Enterprise Linux 6.1 x86_64 [root@db ~]# /u01/app/grid/product/11.2.0/crs_home/root.sh -deconfig Running Oracle 11g root.sh script... The following environment variable
-
I want the black background in full-screen
I liked the old black background in full-screen option in Pages. Is there a way to get that back?