After updating to Maverick some emails arrive with contents that do not belong to Sender and title.
Since updating to Mavericks I'm receiving some e-mails with contents that does not match the Sender and Title. Also receiving blank emails that DO have contents on my iPhone.
HI..
A rebuild can help > Mail (Mavericks): Rebuild mailboxes
Similar Messages
-
After updating to the latest software, my iPhone 4s and iPad 2 are not recognized by iTunes. I have attempted all of the suggusted material on Apple support. I am not satisfied as these items are needed daily.
Connect the device to the computer.
Quit iTunes if it launches.
Click the Start menu, right-click on Computer, and choose Properties.
In the upper-left corner, click Device Manager. The Device Manager window should open.
Click the plus icon (or disclosure triangle () for Windows 7) next to Universal Serial Bus controllers to expand this selection.
Right click on apple mobile device USB Driver and update it to latest version.
This worked for me.. -
When I try to update some apps on my 5s phone a screen appears with some else's mail account that has nothing to do with me. The phone dosen't give me the oppition to change the address. How can I fix this?
Delete the apps, on your phone, that were obtained with this ID, then re-purchase using YOUR ID. All apps are FOREVER tied to the ID used to obtain them, & can only be updated using that ID. They cannot be transferred to another ID.
-
I have not had any issues until I updated to the latest version. I have tried all the suggestions on the support web page and nothing has worked. I am hoping that this version of ITunes is the issue and that Apple will release a fixed version, Any suggestions?
Ok, here is the fix per Chad at Apple. Just did it and it worked.
Open the Control Panel
Uninstall *in this order*:
1. iTunes
2. Apple Mobile Device Driver
3. Apple App Updater
4. Bonjour
You may need to reboot after uninstalling Apple Mobile Device Driver, and ok if it still shows in the Control Panel.
Next, go to Apple.com, then download and install the most recent version of iTunes. -
After updating to iOS 5 email accounts will receive but not send
After updating to iOS 5, email accounts will receive but will not send. Have made sure my SMTP is correct and are turned on. Any suggestions?
Actually, I resolved this by going to the list of servers and selected the same server from the 'Other SMTP Server' category (which happened to be the same server as the primary server) and can now email.
-
Ipad3 Email arrives without Content
Some of of my pop3 Mail arrives without Content. Some mail arrives with content. What can be the problem?
Try quitting the mail app and restart.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Try this if needed as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK. Any tips on how to fix much appreciated!
From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting. -
After updating to Maverick, I have heard there are issues with Imovie 11. I want to know if I should buy it?
Thank you so very much for your reply and help!
I went back to the store where I purchased the Mac and I tell you that was an "experience"!. When I explained the overheating problem they informed me that they could send the Mac for service, they said "after all you do have a warrantee and Apple care".
I live in Sweden, but I´m American and as you mention I was expecting that they would immediately offer a new computer, but instead they want to send my 2 day old computer for service?? Not happy!!
Then when I mention that I could not see my external hard drive via Airport Extreme, the guy said that some HD are not able to be read by the Airport Extreme. That was kind of strange since I been using it to back up the G4 via firewire and never had a problem.
As it did not work with my HD as they had promised, I decided to return the Airport Extreme and buy a Time Machine. Then the salesmen informed me that he would buy the Airport Extreme back for a discount. BUY IT BACK and for a discount?? I had it for 2 days!! Never have heard such a thing in my life!
What was suppose to be a dream come true, is turning into a nightmare, I hate the store would love to just give them back the Mac and just order online from Apple. However I´m afraid they will want to buy it back for a "discount" I just spent 4000 dollars in that store, I get no help and instead they want to make more money out of me without a purchase. Sorry, just so upset!
I managed to fix the trash problem, just took "empty secure" away, according to what I have read, sometimes the fans take a while to "kick in" so I´m waiting for them to "kick in" and yes I will reinstall the system completely and hope that will fix the rest.
Thanks again for the help! -
After updating to Maverick on my Mac - unable to open numbers or pages docs on iPad or iPhone any suggestions or info?
I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
IT shoulldnt erase everything, bt it might, so back up just in case
should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer -
Problems after updating from Mavericks to Yosemite.
Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster? It's has been like this for 4 hrs.
I don't think your mac is setting up. It's stuck.
I would:
hold the power button until it shuts down
unplug all peripherals
do a safe boot (restart and hold down the shift key until you see the apple logo).
If it starts up in a safe boot, then you can try restarting with a normal boot.
If it does not start with a normal boot, then you probably have some incompatible third party software. Likely culprits are:
MacKeeper
CleanMyMac
third-party antivirus software
any other "cleaning" or "optimizing" or similar third party "utilities".
A good place to start would be to uninstall any of those (while in safe mode) and then restart. -
after updating to Mavericks a window pops up saying "Power PC applications are no longer supported" when I try to open AppleWorks6, Microsoft Word, and Illustrator CS. How can I access my files. Secondly, is there a way to allow these programs to function?
MichelPM wrote:
I use those terms primarily for users who seem not too computer savvy as explaining and going through the procedures can be daunting to a user who doesn't do much more than just being able to install and use software on a basic or novice level.
That is why I wrote the "Installing Snow Leopard Server into Parallels for DUMMIES" guide, to give a literal step by step instruction set on how to use Parallels in this situation for a basic or novice level user on up!
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564
Quite honestly, a step by step guide to install Windows into Parallels could be needed by some basic or novice users, as well!
My point is to not scare aware a user with a problem where a potential solution exists.
This is especially true because some of the few, but vocal, "naysayers" about this approach would use your statements to validate their continued criticism of it.
One guy in particular criticises every option other than upgrading to Mavericks compatible software, even when the OP clearly expresses a problem where that option does not exist! ... and he was an early and very vocal proponent of the "installing Snow Leopard into a new partition - 'dual-booting' solution" when Lion was first released back in 2011! -
I can not open Airport utility on my iMac after updating to maverick 10.90.4
I can not open Airport utility on my iMac after updating to maverick 10.9.4 . Error Message:[You can’t use this version of the application “AirPort Utility.app” with this version of OS X. You have "Airport Utility.app"5.4.2] It also will not allow me to install "airport Utility 6.3. Does anybody has a fix for this?
Re-run Software Update and see if there is a newer version of Airport Utility. I suspect your router or iMac may be too old to use Airport Utility 6.3 . As a work- around if Software Update does not work then try reading this article and see if the suggested solution help you.
http://coreyjmahler.com/2013/10/24/airport-utility-5-6-1-on-os-x-10-9-mavericks/ -
Officejet Pro K5400 printing problems after update to Mavericks OSX 10.9
Hi,
I have printing problems with my Officejet Pro K5400 after update to Mavericks OSX 10.9.
Now after printing 1 page the printer prints an extra page with '2345X' sentence on it. As this problem started right after updating, I suppose there is a problem with an update.This patch did solve our problem with the K5400 feeding a "blank sheet".
Thank you. -
Safari hangs after Updating to Mavericks.
Whenever I try to SWIPE(back and forward) between pages in safari, all the trackpad gestures stop working. I cannot even scroll up and down using trackpad. Tried the same in Chrome as well. Witnessed the same issue. But, in Chrome, I can go back to the previous page by clicking on the BACK button. While in Safari, clicking on the back button does not help. I can open and close tabs. but cannot use the trackpad gestures for anything in safari. Kindly help. I have noticed this only after updating to Mavericks. Beforre mavericks, everything was fine.
Details:
OS X 10.9
Safari 7.0 (9537.71)
Chrome Version 30.0.1599.101Sachin --
This is a common situation. Many third-party internet apps/plugins/extensions claim to be compatible with Macs.
And many are not. It's important to remember to check for any updates to this kinds or things prior to upgrade.
At any rate, very happy you've got your problem resolved.
Maybe you are looking for
-
How can I login to icloud from an android phone?
My Gf has my iphone. How can I see recent messages and calls from another device? Or at least see recent messages, calls, pics, etc....
-
Replacement path with text variable
Hi experts, My client requirement is " when he enters the current year or current day then it should display the Description of that particular year r month r day." Can anyone explain me in detail how to create replacement path with text variable on
-
HOW TO FIX WARNING "SELECT QUERY"
CAN SOMEBODY SUGGEST ME AN EASY SOLUTION............EXCEPT FETCH OR FIELD GROUP ONE. I AM SELECTING 6 FIELDS FROM FEBEP TABLE INTO AN INTERNAL TABLE ,BUT THE PROBLEM IS THAT WHILE INSPECTING CODE I AM GETTING AN ERROR WARNING THAT FEBEP "TABLE IS TOO
-
Is their any way, when creating a button or link, that will create a Zoom Level to automatically create Zoom Level to Fit Page. Rather than the default level of page width? I noticed that this happens when creating Bookmarks also. I have tried ever
-
How do I combine two or more pictures into one, blending one partially covering the other?