After upgrade firmware my iPod does not respond to touch. Help me!

After upgrade firmware with iTunes my iPod does not respond to touch.
To be more precise - works, but very, very bad. And around the icons on the display is visible GRAY line of width 1 px.
Please HELP me! This iPod - the gift for my girl.
p.s. Maybe this problem arose because I reflash iPod with old cable from the iPhone?

Thanks all, i solved the problem yourself.
I helped this one topic: http://discussions.apple.com/thread.jspa?messageID=12641053&#12641053

Similar Messages

  • IPod does not respond at all when plugged in

    Alright, this topic is for people who have had this exact problem only. I don't want to get this confused with other problems and have people trying to help troubleshoot multiple problems and get things mixed up. Here's the problem.
    After updating to v1.1.2 of the iPod software, the iPod does not respond when plugged in. The iPod still works fine when not plugged in. It plays music and both the standard and shuffle play modes work accordingly. The problem is when you plug the iPod in, it doesn't charge and it doesn't mount. The orange blinking light does not come on. While plugged in, it works the same way as it does when you're listening to music with it. It's as if the iPod's USB connector is dead. Here is my original post and description of the problem.
    Alright, so here's my story. I bought my 512MB Shuffle in April. It has worked perfectly fine since I got it. Last night, I updated to v1.1.2 of the iPod software, clicked no when it asked if I wanted to restart, added some songs to the iPod, then restarted. As of this morning, I went to listen to some music while out for a bike ride, and I was greeted with the red battery light. I thought it was a bit odd since I had left it plugged in overnight. I figured, what the heck, I'll just plug it in and let it charge when I get back. When I got back, I plugged it into my PC and left for a while. I came back later and went to grab my Shuffle and I noticed it was cold, which was unusual after charging for a couple hours. I plugged it back in, a bit frustrated, and it never came up in Windows. I looked at the iPod plugged into the back of my PC (a high powered USB port) and sure enough, no orange light. No lights at all. I can still slide the switch to one of the play modes (standard play or shuffle) and play music for a couple seconds before it stops and says the battery's dead again. It works.. I mean it turns on and plays music, it's just not charging or mounting when I plug it in. I tried multiple computers and USB ports, none of which worked. I would really like some help with this considering it IS my only source of portable music and I'm not going to go pay $50 to talk to tech support or have it sent in for repairs. That's half of what it's worth.
    I've tried uninstalling all iTunes/iPod related software from the PC I normally use it on and reinstalling it. That didn't work. I also tried uninstalling again and installing the last known working version of the iPod software, still no results. The only thing I havn't tried is giving it a good beating... Not that I would. Anyways, I hope there's a solution to this that doesn't involve buying a new one.
    Here's a rundown of the computers I tested it with.
    500MHZ G4 Cube (384MB RAM/Mac OSX Tiger)
    400MHZ G3 iMac (384MB RAM/Mac OSX Tiger)
    4.2GHZ AMD 64-Bit running Windows XP Service Pack 2 (my PC)
    515MHZ Dell running Windows 2000 (256MB RAM)
    UPDATE: The BIOS won't recognize the iPod, so it has nothing to do with my computer. Somehow, installing v1.1.2 of the iPod software made it so the iPod itself has USB problems. The iPod works to the extent of playing music and showing the battery charge level. I get no response at all when I plug it in, from the computer or the iPod.
    I'm going to have to agree with Philip Harhay on this one. The original 10GB iPod I bought 3 years ago came with a full one-year warranty, no extra charges. I am disappointed to see the Shuffle only coming with a three-month warranty.
    ------------------------------------------------------------------

    Help! I just purchase an iPod Shuffle for my son's birthday and I cannot get the darn thing to show up on my iMac G5. I am running OS 10.4.2 and I have downloaded the latest iPod and iTunes software. When I try to restore my iPod to the factory settings it tells me to plug the iPod into the computer, but it is plugged in. I have tried different USB ports, too. I'm running out of ideas and so is the trouble shooting Apple site. I was hoping someone out there might have some ideas.
    It showed up at first and I transferred a few songs from the iTunes to the iPod but I couldn't get them to play, so I plugged it back into the USB and the icon never came up.

  • If my apple ipod does not respond

    If my apple ipod does not respond to on/off and screen does not respond to touch, does it go back to the shop where it was bought or does it have to be sent to apple?

    For warranty work it depends on where you purchased it. Some resellers have a limited time for when it can be returned and after that you have to go to the manufacturer.
    You can go to Apple at any time. Make an appointment at the Genius Bar of an Apple store.

  • After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.)

    After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.) Help.

    thankyou. THANK you.
    thankyouthankyouthankyou!
    sorry about no screenie but the first option worked (at least so far!)
    THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU

  • After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

    After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS1559 wi-fi does not respond ; in settings when i get to screen: chose a network even that wi-fi is on the whole screen freezes and does not respond to touch. i have to press home button to go out. settings point is not coresponding either (in top left c

    wi-fi in settings does not respond to touch, page becomes frozen and i have to out from it with home button. can not choose network or anything on that screen!?

    noelani72 wrote:
    I'd be curious to go buy an old Linksys WRT54G Wifi Router and see how the iPads work on it....but my lord, I have already spent so much time on this issue as it is.
    Message was edited by: noelani72
    Unless you get that WRT54G for free or next to free, pass on it and pick up an old apple WAP off eBay or similar site. Like you my iPad has a connectivity problem with the WRVS4400N running iOS 4.2.1, where it didn't have trouble with iOS 3.2.2 and ran fine for five months.
    My solution at the office was to spur a second router off my DSL router just for the iPad. The first was a WRT54G that had to be set to only one 802.11 protocol to keep the iPad reliably connected, but swapped it out for an old airport extreme that I kept on after testing it to be good. With a home network like you describe, I would run a subnet off the WRVS4400N just for iPad using an apple WAP (the configuration app for Windows is easy to use).
    Good luck.

  • My iPhone 4 ios5 has suddenly stopped giving me the option to join any wifi network. The 'wifi' line in settings has gone grey and does not respond to touch. How can I get it back? AW

    My iPhone 4S ios5 has suddenly stopped letting me connect to any wifi. The wifi line in settings has gone grey, reads 'no wifi' and does not respond to touch. How do I get reconnected?

    HI there,
    You may want take a look at some of the troubleshooting steps found in the article below.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Hope that helps,
    Griff W.

  • My Safari screen is grayed out.  It does not respond to touch.  How to bring it back to life?

    My Safari screen is grayed out.  It does not respond to touch. How can I restore it back to life?

    Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad by holding down on the sleep button until the red slider appears and slide to shut down. then hold the sleep button until the Apple logo appears to start up.
    You can also reset the iPad by holding down on the sleep button and home button at the same time until the Apple logo appears (takes about 10 seconds) - ignore the red slider.
    Message was edited by: Demo

  • Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.  See if that clears the glitch.

  • HT1349 Problem: my iPhone 4S (1yr old) has started buzzing for no apparent reason. I cannot stop it or turn the thing off. The screen is black and does not respond to touch. Any suggestions?

    Problem: my iPhone 4S (1yr old) has started buzzing for no apparent reason. I cannot stop it or turn the thing off. The screen is black and does not respond to touch. Any suggestions?

    Thanks, AM_Kidd, I had tried that before but I tried again and this time it WORKED!!!!
    The buzzing stopped and I have the home screen up again.
    Phew! It may be that it had been on charge for the last 30 mins.
    Whatever. Again, many thanks.

  • I have areas of my iPad screen that does not respond to touch. Is that normal? The area is random and not always the same location.  How can I fix?

    I have areas of my iPad screen that does not respond to touch. Is that normal?  The areas are random and not always in the same place.  Is there anything I can do to fix this problem?

    Have you tried rebooting it by holding the home and on button until the Apple logo appears?

  • Click on the the emal on my iPad2 e opens blank and it does not respond to touch, it worked perfectly until this morning. All the settings are  the same ed and correct

    when I click on the email on my iPad2 the page opens blank and it does not respond to touch. It worked perfectly until this morning, I did not change the settings everything else is working good. Any idea what to do to sort this out will be very much apriciated.
    Please help!

    Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.

  • After upgrading to Yosemite iPhoto does not open

    After upgrading to Yosemite iPhoto will not work. Does not work even after installing iPhoto Library Upgrader. Any suggestions

    Does not work even after installing iPhoto Library Upgrader. Any suggestions
    You not only have to download the iPhoto Library Upgrader but you also have to run it on the library.  It'll be in the Applications/Utilities folder.  Double click on it to launch and it will automatically locate the last library you worked with and convert it.

  • My ipod gen 5 does not respond to touch.  It plays all by itself, the snooze button is set.  I can not get it to change because when I touch it nothing happens.  What do I do?

    My ipod gen 5 does not respoind to touch.  It plays all by itself and seems to have the snooze set.  It seems to work okay but It won't respond when I touch it.  can anyone help?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • How can I fix my ipod if it does not respond to touch?

    My ipod touch is not responding to touch, I cannot slide to unlock or slide to power off. It syncs and I have tried to restore and recover but it did not help and nothing has worked.  PLEEEEEEAAAASSSEEE HEEEELLLP

    Try holding the 'lock' and 'home' buttons at the same time for about 10 seconds until you see the Apple logo, but from what you said I don't think that will help. If it doesn't, your only course of action is to take it to the Apple store and hope that it's under warranty.
    If not, you can always go to Amazon and buy a new screen and digitizer and try to replace it yourself. Nothing to lose (:

Maybe you are looking for