After upgraded to version 5 few things missing..

Hi,
I am using blackberry curve 8520.. I have been using this for almost a year already. I noticed, there are few things missing and some problems occurred when I upgraded to version 5. Eg. Memopad, No column in option for alarm tones, my BB getting slower during browsing, everytime I try to connect to wi-fi, it will be intermittent or not connected.
For unable to connect to wifi, I suspected it is browser issue but then I set to default setting it is still the same.
Can somebody help me to rectify this please?
Tq.
Solved!
Go to Solution.

Memopad: 1. On your homescreen, press the Menu key > SHOW ALL, so that SHOW ALL is checked.
2. Look in EACH folder on your device... Applications, Instant Messengers, Downloads, etc.
If you still don't see it, look at Options > Advanced > Applications. Do you see it listed there?
If still can't be found, read this link.
Alarms tones? Can you elaborate?
Slow or lagging device, please see below.
i don't know about your WiFi issue, you would also need to elaborate your problem.
To prevent freezing or lagging/slow response on any BlackBerry, the most important practice you can adopt is to be sure to CLOSE applications when you are finished using them.
If you just hit the red "end call" key to go back to the home screen the application actually stays open and running in the background. If you do this repeatedly you will have lots of apps open and consequently your memory will get used up. Lack of memory is the biggest reason your BlackBerry slows to a crawl or locks up. If you get into the habit of actually using the menu key to close the applications this will at least slow down this memory-clogging process. You still may have to do a battery pull or use the "Quickpull" app once in a while when things get slow.
To check what applications are running on your device in the background, press the Menu key then choose Switch Applications. You will see the icons of each application there.
So now, check your applications running in the background. There are commonly four or five applications that will always be running (Messages, Call Logs/Phone, BlackBerry Messenger, Homescreen, and the Browser; there are other third party applications such as BeeJive, and BlackBerry Alerts which will also run in the background which you cannot close if you want them to operate). Make certain that the browser is NOT on an active webpage (open the browser and choose Menu > Close). Close any other applications that do not need to be running (the camera or a game you were playing or Google Maps).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • HT203175 After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

    After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

    One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
    If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

  • After upgrading to version 6 my ArcGIS files become corrupted if I save them while I have FF open (sporadic occurence, but limited to FF being open). How can I downgrade to version 5?

    I am using ArcGIS 10 and Firefox 6 on Windows XP.
    After upgrading to version 6 my ArcGIS files become corrupted if I save them while I have FF open (sporadic occurence, but limited to FF being open). Any ideas of what could be causing this? I have also posted on the ArcGIS forum site for input from that side.
    How can I downgrade to version 5? If that is the only option available.

    Thanks for the reply. It doesn't have to process the php, it just has to show the HTML content. It did that just fine before the last upgrade but won't now.
    I've seen that page you referenced: http://kb.mozillazine.org/File_types_and_download_actions.
    It doesn't help. The things it says to look for aren't there for me, specifically:
    browser.download.pluginOverrideTypes
    plugin.disable_full_page_plugin_for_types
    I followed the rest of the instructions but it didn't help.
    I did get it to quit opening tabs, instead it prompts me what it should do with the file every time now. What it should do, and used to do, is open the php page and display the HTML content.
    Any other ideas?

  • My ipad will not stay activated after upgrading from version 7 to version 8.

    After upgrading from version 7 to version8 I cannot keep my ipad activated.  I have tried online tech support and visited an Apple store with no one able to tell me what is happening.  Some said it might be had ware problems.  Other say it might be software problems.  With vs 7 I never had the problem.. I have anolder ipad with vs 5 and do not have the problems.  any feed back from anyone.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Texts are not showing up after upgrading to version 11

    Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
    Before (version 10.3.183.7...)
    After (version 11.0.1.152...)
    The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
    Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
    You will see the changes with Flash player version 11, and everything working fine with older versions.
    I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

    This is a known issue and we have a fix for this in our next release. Thanks for posting.

  • Z10 not able to call oversea after upgrade to version 10.1.0.273

    I live in Thailand and I usually make call to Malaysia using 009 service from CAT. The full number will be 0096057163xxx and I have been using 009 services for more than 10 years. After upgraded to version 10.1.0.273, I'm not able to make oversea call with 009 services. The reply is "The number you are calling is not in service", I try call with other mobile phones and everything work as per normal. I doubt the the latest version are not able to read and dial the first 2 digits "00". Please help to provide a solutions.

    Checked with BB call center Thailand and they have not received similar complain from other customer, no solutions neither. I try making oversea call with 001, 007 and 008 follow by country code, all having the same problem. Especially for 008 follow country code 60 (Malaysia), it ends up calling to China. It seems like the firmware do not recognized the 3rd digit as it read it as 'country code' instead of international call service offer by CAT Thailand. This is really PISS me off and I hope RIM can do something about it!!

  • After upgrade to version 20 of Firefox websites do not display anymore. Seems like v20 does not work well with ISA

    After upgrade to version 20, we receive the following error when trying to open a website:
    Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202)
    Everything worked fine in the previous version of Firefox.

    Found the fix for this:
    Just set the following values to false in about:config.
    network.automatic-ntlm-auth.allow-proxies
    network.negotiate-auth.allow-proxies

  • Can not access Tiscali web mail account "undefined e-mails" message. This is after upgrading to version 5! Any solutions?

    Can not access Tiscali web mail account "undefined e-mails" message. This is after upgrading to version 5! Any solutions?

    Did it work in Firefox 4, or did you skip that version?

  • 3GS IPHONE AFTER UPGRADE TO VERSION 6.0 SOME COUNTRY SIM CARD NOT ACTIVATED

    why my iphone 3Gs after upgrade to version 6.0 and when i go to china slot in the local sim card it apeal "no sim card" which no problem and can be used before upgraded the software. what should i do to solve this problem.
    thanks.

    rzulfikar wrote:
    Thanks Chris for your solution.
    But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
    The problem is not about upgrading an iPhone to a newer version of iOS.  Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes.  You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
    Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it.  Your choice, your decision, your consequences.

  • After upgrade Digikam doesn't work .. missing libjpeg.so.7

    Hi all,
    After I upgraded to KDE 4.4 several things broke. As stated above DigiKam is missing libjpeg.so.7, this version of the lib is no longer supplied. The version I have on my system
    is now libjpeg.so.8 (after a full system upgrade) The version of digikam is 1.1.0-2
    The error I get when running digikam is:
    digikam: error while loading shared libraries: libjpeg.so.7: cannot open shared object file: No such file or directory
    Anyone have any ideas why things are out of sync? I have tried upgrading with different mirrors, but to no avail.
    Also, not on topic, my ability to shutdown,logoff etc from the desktop does not do anything anymore, this stopped working after the upgrade too.
    Thanks
    Last edited by bmentink (2010-03-09 01:20:22)

    wonder wrote:
    bmentink wrote:
    Update: Since there are no replies to this I bit the bullet and installed the lib from AUR .. this got Digikam going ...
    However I am still at a loss why a full upgrade doing pacman -Syy and pacman -Syu results in an broken dependancy for Digikam ... even after trying with multiple
    different repository mirror sets ... is pacman broken??
    simple, by using packages that are not supported and that should be the starting point. Is not a problem with the current digikam package but maybe with a dependency of digikam.
    i suggest to remove that package (libpng12) and start finding the actual problem.
    LD_DEBUG=files digikam > log 2>&1. grep it the log for libpng12, find out what files still links to it and pacman -Qo that_file
    Ok, What has libpng12 have to do with the price of fish?, my problem is with libjpeg:/
    I do not have any unsupported packages installed that have anything to do with digikam or it's dependents  .. that I know of.
    @flamelab  .. thanks, will try those mirrors ... at least the 32 bit versions ..
    @jasonwryan .. will do so soon as I get home ..

  • My macbook pro is running very slow after upgrading to version 10.9.1  Here are the results of running EtreCheck:

    I am running very slowly after upgrading to ver 10.9.1 on my macbook pro.  Can anyone help me to solve this problem.  I am including the results from running Etresoft.
    Hardware Information:
              MacBook Pro (15-inch, Mid 2010)
              MacBook Pro - model: MacBookPro6,2
              1 2.53 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics - VRAM: 288 MB
              NVIDIA GeForce GT 330M - VRAM: 256 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    Startup Items:
              ChmodBPF: Path: /Library/StartupItems/ChmodBPF
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:53:49
    Disk Information:
              Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (200.83 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GS23N 
    USB Information:
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Internal Memory Card Reader
              Western Digital My Passport 071A 1 TB
                        EFI (disk1s1) <not mounted>: 209.7 MB
                        Backup (disk1s2) /Volumes/Backup: 999.83 GB (622.71 GB free)
              Apple Computer, Inc. IR Receiver
              Apple Inc. Built-in iSight
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.kodak.aio.kcpconnector.plist
              [loaded] com.leapfrog.connect.shell.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.sonos.smbbump.plist
    Launch Agents:
              [loaded] com.kodak.BonjourAgent.plist
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist
              [loaded] com.google.keystone.agent.plist
              [loaded] com.kodak.KODAK AiO Firmware Updater.plist
              [loaded] com.kodak.KODAK AiO Software Updater.plist
              [loaded] com.kodak.StatisticCollection.plist
              [loaded] com.spotify.webhelper.plist
              [loaded] uk.co.markallan.clamxav.freshclam.plist
    User Login Items:
              Monitor
              ScanSnap Manager
              Evernote
              Dropbox
              AdobeResourceSynchronizer
    3rd Party Preference Panes:
              Flash Player
              Growl
    Internet Plug-ins::
              Flip4Mac WMV Plugin: Version: 2.3.8.1
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 10.1.8
              AdobePDFViewer: Version: 10.1.8
              Flash Player: Version: 11.9.900.170 - SDK 10.6
              QuickTime Plugin: Version: 7.7.3
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
              Silverlight: Version: 4.0.51204.0
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User Internet Plug-ins::
              Google Earth Web Plug-in: Version: 7.1
              Dashlane: Version: Dashlane 1.0.0 - SDK 10.7
    Bad Fonts:
              None
    Old applications:
              AiOFirmwareUpdater:          Version: 7.7 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/AiOFirmwareUpdater.app
              Install Spotify:          Version: 1.0 - SDK 10.5
                        /Users/jimschindler/Downloads/Install Spotify.app
              KODAK AiO Home Center:          Version: 7.7.3 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/KODAK AiO Home Center.app
              KODAK AiO Scan:          Version: 7.7.3 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/KODAK AiO Scan.app
              KODAK AiO Software Updater:          Version: 7.7 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/KODAK AiO Software Updater.app
              KODAK AiO Uninstall:          Version: 7.7.3 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/KODAK AiO Uninstall.app
              Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
              Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
              Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
              Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
              Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Document Connection.app
              Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                        /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
              Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Excel.app
              Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
              Microsoft Outlook:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Outlook.app
              Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
              Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                        /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
              Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
              Microsoft Word:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Word.app
              My Day:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/My Day.app
              Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
              Registration:          Version: 7.7.3 - SDK 10.5
                        /Library/Printers/Kodak/AiO_Printers/Registration.app
              Solver:          Version: 1.0 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              Spotify:          Version: 0.8.4.124.ga3559d86 - SDK 10.5
                        /Applications/Spotify.app
              SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
    Time Machine:
              Skip System Files: NO
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 464.96 GB Disk used: 277.92 GB
              Destinations:
                        Backup [Local] (Last used)
                        Total size: 931.17 GB
                        Total number of backups: 85
                        Oldest backup: 2013-02-13 18:40:47 +0000
                        Last backup: 2013-12-31 17:59:26 +0000
                        Size of backup disk: Adequate
                                  Backup size 931.17 GB > (Disk used 277.92 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  29%          Mail
                   3%          WindowServer
                   2%          mtmd
                   1%          EtreCheck
                   0%          NETGEARGenieDaemon
    Top Processes by Memory:
              410 MB          mds_stores
              238 MB          Evernote
              229 MB          Mail
              147 MB          iBank
              123 MB          WindowServer
    Virtual Memory Statistics:
              3.36 GB          Free RAM
              2.92 GB          Active RAM
              621 MB          Inactive RAM
              1.11 GB          Wired RAM
              1.67 GB          Page-ins
              0 B          Page-outs

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • After upgrading iTunes, I get the error, missing msvcr80.dll, How do I resolve this issue?

    I am using Vista 32 bit on an older dell laptop and have been using iTunes for a long time, downloading songs, syncing with my iPhone, and etc, with no problems.  After upgrading to the newest version of iTunes 11, I received an error message of "missing MSVCR80.dll, please reinstall the software" when trying to start the iTunes application.  I removed the iTunes software and associated apps from my laptop and reinstalled the iTunes software.  While the software was installing it indicated that I did not have permission to install the application.  Although I started the installation with the option of "Run as Admistrator".  Since I could not reinstall the iTunes software, I choose a restore point where my iTunes was working before, and changed to that point.  I am still getting "MSVCR80.dll missing".  Does anyone know how I can restore the missing MSVCR80.dll?  I have found articles on the web of how to do this, but none seem to work.
    Thanks

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Help! Safari not working after upgrade to version 2.0

    After i have upgraded to version 2.0, dispite all the problems i have read it has worked fine for 24hrs, but all of a sudden the wifi link has stopped.
    If i try using it the message reads " Safari can't open the page because it is not connected to the internet"
    Why! I haven touched a thing it just stopped mid browse
    Any help?

    Are you noticing that all other applications that use the Internet doing the same thing? i.e. email, weather, stocks, etc. They all time out.
    Same symptom: Looks like Apple broke wifi in 2.0

  • E75 problems after upgrade to version: 201.12.01.

    I've noticed the following problems after the phone software upgrade to version: 201.12.01.
    During the call, when I in move, for example, in car, and the phone switches between different base stations, the conversation breaks.
    When I have poor network coverage, where the phone all the time looking for better coverage, in general conversation is impossible. After few words screen appears, "connection error".

    After update to 201.12.01 version I have problems with Mail for Exchange. It can't download email message from Exchange 2003! We don't want to upgrade on Exchange 2007 version! 
    Error message is: "Security Policy that enables downloading HTML messages is disabled" (mayby sorry for  wrong translate from Russian)
    Message Edited by demonas on 08-Dec-2009 06:58 PM
    Message Edited by demonas on 08-Dec-2009 06:58 PM

  • I'm using i phone 3gs after upgraded to ios 5 few hours from shop my phone totally shutdown and cannot on.how to solve it.tq

    help..help...my i phone 3gs after upgrading to ios 5 for few hours thn my phone "pass away"total cannot on anymore.how to solve this problem.tq

    Thanks for the clarification.    Yes, I do access my email from 2 different sources. 
    FYI, I use the POP mailserver as I need most of the information to be loaded onto my PC while on a plane / not connected to the interenet.
    The primary use of mail on my iPhone is to be available as much as possible - even when I'm away from my office.
    Thanks again for your help.   I'll start deleting them in segments of 100.......

Maybe you are looking for

  • How to modify a lookup field-type to use checkbox instead of radiobutton?

    How to modify a lookup field-type to use checkbox instead of radiobutton? I would like to modify the behavior for the lookup field. Normally you get a screen where it is possible to search through a lookup. The items resulted from the search are list

  • Problem in Routine after rounding off the condition value

    Dear all,       I have attached the routine for rounding off value for condition value for T.Code va02. Routine is working fine but the problem is after the execution of routine it goes in some standard program LV61AA55 where again the rounded value

  • Can We add more facets to panelPage Componet?

    Hi! Frank, Could you tell me if panelPage component can be customised? Can we Extend the panelPage,i.e Can we create more facets to the panelPage Component,than what are already provided? Suppose, the panelPage component has the content that goes to

  • PS Now game not starting up

    Hi everyone,I was looking forward to trying a ps now game tonight. I chose God of War II HD. My connection speed shows it should work as I got a green smiley face. Unfortunatley when I have tried to start the game it goes through all the motions (che

  • Microsoft surface flashplayer

    Is there a way to inprove the flash player on my microsoft surface? I cannot access many sites that require flash player.