After upgrading HANA from rev. 69.1 to rev.72 OOM errors occure during HDB startup

Hello,
we upgraded our HANA scale out system from rev. 69.1 to rev. 72.
~4 hours after the upgrade our HDB crashed with OOM errors on  the master indexserver.
Since than we are trying to start it back up and face OOM errors during startup in the index rebuild phase:
The errors clearly state the HANA runs out of allocatable memory for Pool/IndexRebuildAllocator during startup.
It looks like HANA requires more memory during this phase compared to rev. 69.1
Our Master node has 512GB of physical memory and the Allocation limit is set to 95% of this (default).
Here is what we read from our logs during startup:
[3331]{-1}[-1/-1] 2014-03-24 01:35:36.735498 i Service_Startup  ptime_master_start.cc(00719) : Rebuilding system indexes.
[3331]{-1}[-1/-1] 2014-03-24 01:35:37.236971 i Service_Startup  ptime_master_start.cc(00733) : Rebuilding system indexes done.
[3331]{-1}[-1/-1] 2014-03-24 01:35:37.237002 i Service_Startup  ptime_master_start.cc(00735) : Rebuilding indexes.
[3331]{-1}[-1/-1] 2014-03-24 01:35:37.244660 i Service_Startup  IndexManager_rebuild.cc(00478) : Number of indexes: 2837
[3331]{-1}[-1/-1] 2014-03-24 01:35:37.245606 i Service_Startup  IndexManager_rebuild.cc(00580) : Number of JobEx indexes: 2798
[3367]{-1}[9/-1] 2014-03-24 01:36:33.729391 w ResMan           ResourceContainer.cpp(01300) : Information about shrink at 24.03.2014 01:28:46 000 Mon:
Reason for shrink: Precharge for big block allocation. User size:  6269307200
ShrinkCaller
[4123]{-1}[9/-1] 2014-03-24 01:36:42.465154 w Memory           PoolAllocator.cpp(01060) : Out of memory for Pool/IndexRebuildAllocator, size 48B, flags 0x0
[4123]{-1}[9/-1] 2014-03-24 01:36:42.465168 e Memory           ReportMemoryProblems.cpp(00733) : OUT OF MEMORY occurred.
[3538]{-1}[9/-1] 2014-03-24 01:36:42.465164 w Memory           PoolAllocator.cpp(01060) : Out of memory for Pool/IndexRebuildAllocator, size 48B, flags 0x0
[3538]{-1}[9/-1] 2014-03-24 01:36:42.465177 e Memory           ReportMemoryProblems.cpp(00733) : OUT OF MEMORY occurred.
[4123]{-1}[9/-1] 2014-03-24 01:36:42.465168 e Memory           ReportMemoryProblems.cpp(00733) : Failed to allocate 48 byte.
[3538]{-1}[9/-1] 2014-03-24 01:36:42.465177 e Memory           ReportMemoryProblems.cpp(00733) : Failed to allocate 48 byte.
[4123]{-1}[9/-1] 2014-03-24 01:36:42.465168 e Memory           ReportMemoryProblems.cpp(00733) : Current callstack:
[3538]{-1}[9/-1] 2014-03-24 01:36:42.465177 e Memory           ReportMemoryProblems.cpp(00733) : Current callstack:
[3562]{-1}[9/-1] 2014-03-24 01:36:42.465245 w Memory           PoolAllocator.cpp(01060) : Out of memory for Pool/IndexRebuildAllocator, size 48B, flags 0x0
[3562]{-1}[9/-1] 2014-03-24 01:36:42.465256 e Memory           ReportMemoryProblems.cpp(00733) : OUT OF MEMORY occurred.
GLOBAL_ALLOCATION_LIMIT (GAL) = 520645177866b (484.88gb), SHARED_MEMORY = 243742983024b (227gb), CODE_SIZE = 6919073792b (6.44gb)
PID=2987 (hdbnameserver), PAL=487793667686, AB=1596952576, UA=0, U=1415644701, FSL=0
PID=3196 (hdbcompileserve), PAL=487793667686, AB=447041536, UA=0, U=356200477, FSL=0
PID=3193 (hdbpreprocessor), PAL=487793667686, AB=416477184, UA=0, U=292814063, FSL=0
PID=3254 (hdbstatisticsse), PAL=54199296409, AB=1040187392, UA=0, U=862081043, FSL=0
PID=3257 (hdbxsengine), PAL=487793667686, AB=1100451840, UA=0, U=907234077, FSL=0
PID=3251 (hdbindexserver), PAL=487793667686, AB=265382010522, UA=0, U=218447843045, FSL=0
Total allocated memory= 520645177866b (484.88gb)
Total used memory     = 472943874222b (440.46gb)
Sum AB                = 269983121050
Sum Used              = 222281817406
Heap memory fragmentation: 9
Top allocators (ordered descending by inclusive_size_in_use).
1: /                                                                       218448756093b (203.44gb)
2: Pool                                                                    214254480696b (199.53gb)
3: Pool/IndexRebuildAllocator                                              196297409104b (182.81gb)
4: Pool/PersistenceManager                                                 9920106968b (9.23gb)
5: Pool/PersistenceManager/PersistentSpace(0)                              9779577952b (9.10gb)
6: Pool/PersistenceManager/PersistentSpace(0)/RowStoreLPA                  9473884512b (8.82gb)
7: Pool/ResourceContainer                                                  2852314824b (2.65gb)
8: AllocateOnlyAllocator-unlimited                                         2832931544b (2.63gb)
9: Pool/malloc                                                             2660566632b (2.47gb)
10: Pool/malloc/libhdbrskernel.so                                           2467813288b (2.29gb)
11: Pool/RowEngine                                                          2284285840b (2.12gb)
12: AllocateOnlyAllocator-unlimited/FLA-UL<3145728,1>/MemoryMapLevel2Blocks 2135949312b (1.98gb)
13: AllocateOnlyAllocator-unlimited/FLA-UL<3145728,1>                       2135949312b (1.98gb)
14: Pool/RowEngine/CpbTree                                                  1417842512b (1.32gb)
15: AllocateOnlyAllocator-limited                                           1184520640b (1.10gb)
16: AllocateOnlyAllocator-limited/ResourceHeader                            1184517680b (1.10gb)
17: Pool/RowEngine/LockTable                                                536881408b (512mb)
18: AllocateOnlyAllocator-unlimited/FLA-UL<120,256>/BigBlockInfoAllocator   360752520b (344.04mb)
19: AllocateOnlyAllocator-unlimited/FLA-UL<120,256>                         360752520b (344.04mb)
20: Pool/PersistenceManager/PersistentSpace(0)/RowStoreConverter            239921680b (228.80mb)
Top allocators (ordered descending by exclusive_size_in_use).
1: Pool/IndexRebuildAllocator                                               196297409104b (182.81gb)
2: Pool/PersistenceManager/PersistentSpace(0)/RowStoreLPA                   9473884512b (8.82gb)
3: Pool/ResourceContainer                                                   2852314824b (2.65gb)
4: Pool/malloc/libhdbrskernel.so                                            2467813288b (2.29gb)
5: AllocateOnlyAllocator-unlimited/FLA-UL<3145728,1>/MemoryMapLevel2Blocks  2135949312b (1.98gb)
6: Pool/RowEngine/CpbTree                                                   1417842512b (1.32gb)
7: AllocateOnlyAllocator-limited/ResourceHeader                             1184517680b (1.10gb)
8: Pool/RowEngine/LockTable                                                 536881408b (512mb)
9: AllocateOnlyAllocator-unlimited/FLA-UL<120,256>/BigBlockInfoAllocator    360752520b (344.04mb)
10: Pool/PersistenceManager/PersistentSpace(0)/RowStoreConverter/ConvPage    239075328b (228mb)
11: Pool/RowEngine/Internal                                                  205837824b (196.30mb)
12: StackAllocator                                                           176672768b (168.48mb)
13: AllocateOnlyAllocator-unlimited/FLA-UL<48,128>/FreeBigBlockInfoAllocator 144301008b (137.61mb)
14: Pool/RowEngine/Transaction                                               103391528b (98.60mb)
15: Pool/malloc/libhdbexpression.so                                          90507984b (86.31mb)
16: Pool/malloc/libhdbbasement.so                                            90380472b (86.19mb)
17: AllocateOnlyAllocator-unlimited/ReserveForUndoAndCleanupExec             84029440b (80.13mb)
18: AllocateOnlyAllocator-unlimited/ReserveForOnlineCleanup                  84029440b (80.13mb)
19: Pool/Statistics                                                          83825720b (79.94mb)
20: Pool/PersistenceManager/ContainerNameDirectory                           59182968b (56.44mb)
In order to fix this bottleneck, we first need to get HDB started, but how?
Is there a way to aviod that row store tables are being loaded during startup? (this would allow enough memory for the index rebuild)
Is there a way to skip the index rebuild during startup?
Can we increase the allocation limit to more than 95% of the physical memory? (e.g. we could configure swap space to be utilized, just to get over the edge of this during the startup in order to bring our HDB back up and work on reducing the memory requirement on the master index server)
Kind Regards
Florian Wittmann
ps. we also have a call with SAP.

To update everyone who runs into the same issue during startup of HANA, here is the solution that has worked for us. But I highly recommend to have such an approach reviewed by SAP service before I you perform this!
For us the only chance left to bring HANA up was to configure swap space on the master node. (We configured 20GB...we could not know how much memory it would need during the startup to get passed the index rebuild, so that was just a guess that turned out to be just enough for us to get passed that memory peak during the startup phase).
After that we adjusted the custom parameter file /sapmnt/<SID>/global/hdb/custom/config/global.ini
and maintained a global_allocation_limit that we manually calculated as (512GB physical mem. + 20GB swap mem.)/0.95
e.g.
[memorymanager]
global_allocation_limit=517530
Than we started HANA up again and made use of the page file during the index rebuild in the startup phase...of course this dramatically slows down the startup...well you do an index reorg using swap space...but after 1hour we got passed the index rebuild and memory utilization went down again. (With this error we learned that HANA has a significantly higher memory consumption during startup and the upgrade from SP 6 to SP 7 must have even increased this slightly, since we managed to startup our HANA db before upgrading without this issue, but it was not the root cause!)
Now that we had HANA back up, we investigated memory consuming indices together with SAP, and with the help of below query, we identified row store table RSMONMESS to hold 25GB of 2ndary indices!
select table_name, round((sum(index_size)) / 1024 / 1024, 2) as
SIZE_IN_MB, count(*) as number_of_indexes from M_RS_INDEXES group by
table_name order by SIZE_IN_MB desc
Before droping 2ndary indices:
TABLE_NAME;SIZE_IN_MB;NUMBER_OF_INDEXES
RSMONMESS;30.883,8;6
drop index SAP<SID>."RSMONMESS~AXX";
drop index SAP<SID>."RSMONMESS~TIM";
drop index SAP<SID>."RSMONMESS~AU1";
drop index SAP<SID>."RSMONMESS~RID";
drop index SAP<SID>."RSMONMESS~AXY";
After drop:
TABLE_NAME;SIZE_IN_MB;NUMBER_OF_INDEXES
RSMONMESS;5.708,43;1
With that change we reset our custom parameter on global_allocation_limit and went back to the default (95% of main physical mem.), removed the swap file and started up HANA again...and during this startup we managed to stay in our global_allocation_limit and bring HANA back up again!

Similar Messages

  • Facing Parse Errors after upgrading database from 10g to 11g

    Hi,
    We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
    Kindly look into below parse errors.
    ********************************** Parse Error *****************************************************
    Tue Aug 13 14:13:08 2013
    kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
    PARSE ERROR: ospid=15598, error=1446 for statement:
    SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
    Tue Aug 13 14:13:10 2013
    kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
    PARSE ERROR: ospid=29813, error=942 for statement:
    Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
    kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
    PARSE ERROR: ospid=29813, error=942 for statement:
    SELECT password
    FROM SYS.USER$
    WHERE  0=1
    kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
    ----- PL/SQL Stack -----
    ----- PL/SQL Call Stack -----
      object      line  object
      handle    number  name
    319e277050        30  anonymous block
    319e277050        57  anonymous block
    PARSE ERROR: ospid=29813, error=6550 for statement:
    BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
    kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
    ----- PL/SQL Stack -----
    ----- PL/SQL Call Stack -----
      object      line  object
      handle    number  name
    319e277050        67  anonymous block
    PARSE ERROR: ospid=29813, error=942 for statement:
    SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
    Please help.
    Regards
    Suresh

    Hi Suresh,
    Apologies for misunderstanding..
    Tue Aug 13 14:13:08 2013
    kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
    PARSE ERROR: ospid=15598, error=1446 for statement:
    SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
    Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
    1 Get the 'ospid' value from the error
    2. Issue the below command:
    SQL> select request_id,ORACLE_PROCESS_ID
      2 from fnd_concurrent_requests
      3 where request_id = 15598;
    3. After obtaining the request_id
    4, Query it from the front-end using SYSADMIN responsibility
    Hopefully this should get you the respective concurrent report/program.
    Thanks &
    Best Regards,

  • Problems with charts after upgrading APEX from 3.2 to 4.1

    After upgrading apex from 3.2 to 4.1 the combination stacked bar/Stepline charts no longer works. Any help would be appreciated.
    Thanks.

    Hi "904055",
    I believe the reason your chart is no longer working is because you are attempting to generate a chart type that is not covered by our AnyChart Flash charts license i.e. Stepline charts are not one of our support chart types. We only support the chart types exposed via the Application Express UI i.e. the chart types listed in the Create wizards. If you wish to create other AnyChart chart types, you will need to contact AnyChart directly, in order to obtain a separate license and swf file.
    If you believe that your chart is only using chart types covered by our license, but are still experiencing issues, then please place a testcase on apex.oracle.com, post some login credentials, and I'd be happy to take a look.
    Regards,
    Hilary

  • How do I get iphoto to upgrade photo library after upgrading os from snowleopard to yosemite?

    How do I get iphoto to upgrade photo library after upgrading os from snowleopard to yosemite?

    To add to OT's advice:
    You may need to delete your current iPhoto from the Applications folder, if it is a version of iPhoto '11, before the App Store will allow you to download it from the main page.
    To locate iPhoto at the AppStore, open the "Featured" tab and enter "iPhoto" into the search field.

  • After upgrade BPC from 7.0 to 7.5 NW we facing issue in Legal consolidation

    Hi
    After upgrade BPC from 7.0 to 7.5 NW we facing issue in Legal consolidation where in case of equity knock off the amount is not get balanced even after we run legal consolidation package in group currency.
    Regards
    Vikash

    Hi sandeep ,
    Hence the problem was not there with previous versions where the .js files were simply not compressed by default.
    Solution :
    I believe switching off javascript compression is a suitable option in this case as the script files are usually cached by the browser as well and will not be transmitted every time.
    Kindly follow these steps:
    1. Enter the J2EE Config tool.
    2. drill down: Global Server Configuration->services->http
    3. on the right hand side, click on NeverCompressed
    4. on the bottom, add at the end: ,*.js
    5. Apply the changes
    6. restart the J2EE.
    After this clear the browser cache and then log onto the portal and check if the issue gets resolve
    I hope it will useful to you.
    Thanks@ Re grads
    G.srinu

  • Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

    Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

    It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

  • HT5012 Why my smart sim is no service after upgrade ios7 from iphone4

    Why my smart and globe sim is no service after upgrade ios7 from ios 6?

    Hi Kenshaine,
    I am in the same situation and my 4s is facing the same issue..It seems APPLE cant help us!! ***!

  • After upgrade java version - Error occurred during initialization of VM

    Hi,
    I have upgraded the java version to 6 in apps tier of my 12.0.4 ebs running on OEL 5.
    I followed below steps for this.
    Download Latest JDK 6.0 Update
    Stop All Application Tier Services
    Replace JDK Home Used With Oracle E-Business Suite Release 12
    $ cd [IAS_ORACLE_HOME]/appsutil
    $ mv jdk jdk_old
    $ mv jdk1.6.0_15 jdk
    After that when i tried to do any thin starting the services, autoconfig it gives me below error.
    $ADJVAPRG -version
    Error occurred during initialization of VM
    java/lang/NoClassDefFoundError: java/lang/Object
    Do i need to update any values in XML file?
    Please help.
    Thanks,
    Kavitha

    I have upgraded the java version to 6 in apps tier of my 12.0.4 ebs running on OEL 5.
    I followed below steps for this.
    Download Latest JDK 6.0 Update
    Stop All Application Tier Services
    Replace JDK Home Used With Oracle E-Business Suite Release 12
    $ cd [IAS_ORACLE_HOME]/appsutil
    $ mv jdk jdk_old
    $ mv jdk1.6.0_15 jdkDid you complete all the steps in (Using Latest Java 6.0 Update With Oracle E-Business Suite Release 12 [ID 455492.1])?
    After that when i tried to do any thin starting the services, autoconfig it gives me below error.
    $ADJVAPRG -version
    Error occurred during initialization of VM
    java/lang/NoClassDefFoundError: java/lang/Object
    Do i need to update any values in XML file?
    Please help.What does "echo $ADJVAPRG" return? Make sure it is set in the context file correctly and run AutoConfig then.
    Please see "Step 5.2: Verify Configurations On All Application Tier Nodes" section in (Using Latest Java 6.0 Update With Oracle E-Business Suite Release 12 [ID 455492.1]).
    Thanks,
    Hussein

  • MAIL: The upgrade failed - error occurred during upgrade. launching Mail Import assistant  to repair damaged index did not work

    After installing Yosemite, the Mail required an upgrade. the upgrade was completed but resulted in a message: The upgrade failed. error occurred during the upgrade, check continue to launch Mail Import Assistant.
    This resulted in an instruction: Your mail index has been damaged. To repair it quit mail. Mail will repair index next time you open mail.
    Following this instruction resulted in the same failure message being repeated continuously.
    How do I proceed to upgrade the Mail app.?

    If doing as the alert directs (relaunching Mail) has no effect, see below.
    The new version of Mail stores its database in a different format than the old one, so the database has to be converted before Mail can use it. Sometimes the conversion fails because the old database is corrupt. The easy way to recover is to discard the old database and start afresh. You can do that without losing any messages, provided that:
    ☞ All your incoming mail accounts are on an IMAP or Exchange server
    ☞ You store sent messages on the server
    ☞ You don't have any "On My Mac" mailboxes
    Most well-known independent mail services such as iCloud and Gmail are based on IMAP. On the other hand, ISP-hosted mail services almost always use POP. If your ISP is one of your mail service providers (or the only one), you probably can't use this procedure. Ask for further instructions in that case.
    If you know that the conditions above are satisfied, continue as follows.
    Quit Mail if it's running. Back up all data.
    Open the Library folder in your home folder by holding down the option key and selecting
              Go ▹ Library
    from the Finder menu bar. Inside it is a subfolder named "Mail." Move that folder to the Desktop. You're not moving the Mail application; you're moving a folder named "Mail."
    Open the Internet Accounts pane in System Preferences and recreate your mail accounts other than iCloud with the same settings as before. To recreate an iCloud mail account, all you have to do is open the iCloud preference pane and check the box marked Mail.
    Launch Mail. If all goes well, your mailboxes should be restored automatically. The messages will be downloaded from the servers, so it may take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and that may be a problem if your bandwidth usage is metered.
    If the mailboxes are created successfully, you can delete the folder you moved to the Desktop. You may have to recreate your Mail rules, signatures, and custom stationery. If it's very important to you not to have to do all that, ask for instructions before deleting the folder.

  • Error occurred during automatic upgrade of MDL file

    The MDL file is exported from 10.2, we were trying to imported it into 11.2 using OMBIMPORT, got following error message.
    MDL1323: Error occurred during automatic upgrade of MDL file </opt/etl/etl.mdl>.
    Detailed Error Message:
    Error: MDL1122: Import data file auto_upgrade.src not found
    Any suggestion is greatly appreciated.

    I had the same problem
    MDL1323: Error occurred during automatic upgrade of MDL file <>.
    Detailed Error Message:
    Error: MDL1122: Import data file auto_upgrade.src not found
    Reason:
    I exported mdl from 11.2.0.2 version to 11.2.0.1
    Solution:
    - Upgrade version DWH from 11.2.0.1 to 11.2.0.2
    - Install separate client on the server DWH and run import script from client directory

  • Benefits Service - Error occurred during currency conversion from  to USD

    I am attempting to run the add beneficiaries service in employee self servie and receive the following error message "Error occurred during currency conversion from blank to USD
    Has anyone come across this error before?

    Both are set up properly.  This error only happens on some US teammate records.  It seems to occur after we do a refresh of our QA environment from our produciton environment

  • Problem updating After Effects CC (2014)  I get this message: Update Failed  Error encountered during installation. (U44M1P7)

    Problem updating After Effects CC (2014)  I get this message: Update Failed  Error encountered during installation. (U44M1P7)

    Hi,
    It’s version 13.1.1  It’s a trial version.
    I am updating it from the Creative cloud desktop application.
    I have the photography subscription with Lightroom and Photoshop with Creative Cloud.
    I was interested in trying out the video software and have trials of Premiere Pro as well as others.  The CC desktop app alerted me to the AF update just as it does for the others I subscribe to plus the ones I am using as trials.  I have not had any problems with the other apps (trial or not), only with AF.
    Thanks.
    Nancy Chadwick

  • Error occured during extraction from APO to BI 7.0

    Hi Experts,
    I am in the process of extracting data from SCM(APO-Demand Planning) to BI .I have selected the relevant planning area 9ADP01 and given Generate Export DS in APO system and replicated the same in BI.But before scheduling the InfoPackage,when i checked for the DS 9A0APO_DP_ORDERANALYTICS_1,it displays "Error occured during extraction".I do have a doubt whether I should activate the DS in RSA5 before replication (but am not able to find the DS under DP in RSA5)
       I have checked the forums but solutions mentioned did not resolve my issue.
    Thanks,
    Meera

    Hi,
    The issue is resolved...
    Regards,
    Meera

  • HT1926 After installing the lates version of iTunes, a bubble pops up and says, "iTunes installation complete, Error occured during installation before iTunes could be configured. Your system has not been modified.." How do I correct this?

    After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
    iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
    I did this, but this bubble keeps appearing. What do I need to do?

    Hello there, glenkram.
    The following article outlines great steps to try for troubleshooting your very issue:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • After installing Lightroom 3, we get a message saying "An Error occurred when attempting to change modules"

    After installing Lightroom 3, we get a message saying "An error occured when attempting to change modules"
    The Lightroom background comes up but I don't have the side information and no arrow to get it.
    Can anybody help.
    Debbie

    Best guess is a permissions problem although you haven't mentioned what operating system you are using.
    Have a look at: Error changing modules | Lightroom

Maybe you are looking for

  • 8051 based spectral analyser

    Greetings, I am working on a project that consists in creating a spectral analyser for the power line using the 8051 and the ADC0808 for analog to digital conversion. In the LabVIEW I am trying to sample the waveform of the power line and use the FFT

  • Changes done in the FM SO_NEW_DOCUMENT_ATT_SEND_API1

    *In 4.7 The FM SO_NEW_DOCUMENT_ATT_SEND_API1 works  in the manner with the pattern by sending the mail with the data and a link but after upgrade to ECC6.0 the  same FM is sending the mail and the data in the form of an attachment which could not be

  • Adding widgets to the widgets panel, and including resources.

    I use Google Checkout and various other items which would be nice to setup as widgets instead of dealing with the HTML snippet widget and fiddling with editing HTML and JavaScript manually and having it in the page as an invisible box. Does anyone kn

  • TS3899 Having trouble getting email from my blue yonder account.

    ipad says searching for mail and then times out with error message, "server not working check settings". have checked settings and deleted account and re installed but still having trouble. Also tried power on off. Can send mail ok. Any help would be

  • Powershell output as boolean

    Hello Scripting guys Please prompt me. How i can get output as true or false, assume from Get-ADUser "j.maxi" or another cmdlet which outputs string, int, array?