After upgrading memory Ovolab Phlink no longer working

Mac Mini as server running OS 10.5.8.
I just put in 1 GB of new memory in my server (Mac Mini) so now it has two modules one 256 and one 1GB. Nothing else changed.
Since doing that Ovolab Phlink (is my ‘answering machine’ programme) stopped working. It sees that a call is coming in and recognises the number but does not answer. On manual answering it plays the message to the caller but the phone keeps ringing. It also does no longer send a recording of the call per email.
I am not expecting anybody here to be familiar with Ovolab Phlink but wonder if anybody has a clue as to what could have happened that it was working fine immediately before and not working immediately after (all other programmes seem to be fine). Could it have to do with the internal battery having been disconnected? Or?

Thanks for your post sig
You are posting in the "Mac OS X v10.5 Leopard > Installation and Setup" forums which your post has nothing to do with.
I think it does. as I assume it is a soft error to with installing
You should check with the vendor of the program
done already no luck
You don't state if there are other programs that have difficulty working
I did!
(all other programmes seem to be fine)
or if the machine recognizes the additional ram nor if the ram is appropriate for your Mini.
Both is yes and would be the first thing anybody would check and so did I. also with everything else running fine you know the RAM is working.

Similar Messages

Problems after upgrade: Leopard to Leopard no longer works

My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
n

I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps.

After upgrading to Lion, headphones no longer work.

Plugging headphones in does not dsconnect speakers.

you dont tell what headphones.
and many software and hardware to need an update. But this is a part from the hardware/software.
to tell you, that you need an update.
Best Regards
Stefan

Since upgrading to Tiger Stuffit no longer works.

Since upgrading to Tiger, Stuffit no longer works. I cannot send an email with file compression selected, because it gives me an error message: The action could not be completed, an unknown internal program error has occurred.
I had been using version 9, but on the advice of Allume tech support, I uninstalled it, downloaded and installed Stuffit Deluxe 10.0.1. Twice. There are no error messages, as the program simply does not open. It is available in the dock, when I double click it, it will bounce once or twice and appear to be opening, and then stop bouncing. If I drag a file onto the icon, it bounces twice and then stops, no compressed file is created. If I go directly to the application folder and open the application, it looks like it will open, it places an icon in the doc for a split second, and then it goes away. Stuffit Expander, however, works fine.
Allume has stopped answering my inquiries because they can't figure out what's going on. Does anybody have any suggestions?

Prior to ugrading to Tiger did you repair your hard drive and permissions? Did you do a true Upgrade install or an Archive and Install? If you did an Upgrade install what version of OS X did you upgrade? If you did an Archive and Install, then try reinstalling Stuffit.
To repair the hard drive and permissions do the following:
Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

After upgrading to ios7 I no longer kan read or download iCreate magzine ? Eternal updating database then quits! Aaaugh

After upgrading to ios7 I no longer kan read or download iCreate magzine ? Eternal updating database then quits! Aaaugh...
Other mags work just fine though?

After upgrading to ios7 I no longer kan read or download iCreate magzine ? Eternal updating database then quits! Aaaugh...
Other mags work just fine though?

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." I am obviously connected to the internet since you are reading this.
I tried upgrading permissions but it did not help!? Can anyone tell me what is wrong? Thanks

Try
Reboot the computer, see if that fixes it.
Then try:
Backup your files off the computer (not TimeMachine) and disconnect
Hold c boot off the 10.6 disk and simply reinstalling OS X
Log in and update to 10.6.8
c boot off the 10.6 disk again and use Disk Utility >Repair Disk
reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

Firefox 7 is forcing me to fill out a form field that isn't required. I've used FF on this site for years but when I upgraded to FF7 it no longer works. IE it works fine.

Firefox 7 is forcing me to fill out a form field that isn't required. I've used FF on this site for years but when I upgraded to FF7 it no longer works. IE it works fine.

It's our internal applicant tracking systems (resume database). It works fine in IE and all previous verisons of FF but in FF 7 a bubble icon pops up stating that "Please fill out this field".
The field is not required but states "Require all of these words" if you to run a search based on those parameters.

After upgrading to Photos, how can I work on a Book Project from another apple device?

After upgrading to Photos, how can I work on a Book Project from another apple device?

I'm not sure I understand what you are asking, but on the device/Settings, do you have iCloud and Photos sync turned on?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't w

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't why rhapsody doesn't work anymore?

Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

After upgrading to snow leopard my charger works intermittently, could this be a software issue or just a coincidence

After upgrading to snow leopard my charger works intermittently, could this be a software issue or just a coincidence

Very likely this is a coincidence. Have you tried resetting your System Management Controller? That would be the best first step for any issue that has to do with power.
Best of luck.

After installing Mountain Lion, Expose no longer works.

After installing Mountain Lion, Expose no longer works.

Unfortunately the Expose feature as you know it from Snow Leopard was removed by Apple in Lion and Mountain Lion.
You can make all windows for an app 'expose' by putting the cursor on the Dock icon and using a 4-finger swipe-down.

I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

IMac is running slow again after upgrading Memory to 6 GB 800 MHz DDR2 SDRAM. Mail is especially slow. I have searched the community info, but I am really a novice and most of the solutions appear to be beyond my level of proficiency. Please help!

I am at a loss. even after reading other questions and responses. After upgrading to Mt. Lion, everything on my iMac slowed down. I knew more memory would be needed, so I went from 2G to 6G. That worked for awhile, but now, about 3 weeks later, things are slowing down again. Mail is especially slow, when moving from one message to another, and also just plain typing is delayed in mail. iPhoto has had the spinning wheel issue since change to Mt. Lion, but it eventually stops and the app itself is functional, so this is just annoying as much as anything.
Any easy, simple to follow instructions would be appreciated. Is it better for a novice to take to the Genius Bar or to an approved Mac repair center in my area, rather than attempt some of the solutions I've seen offered here. And, if I do, what's the likelihood the issues will be resolvable?? Clearly, I am not the only one with this issue ...
Thanks for any help you can offer.

There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

After iOS 4, 3G service no longer works on my 3G

I, too, have had horrible thinhs happen to my 3G after the iOS4 "upgrade." I've tolerated most, but now 3G service is not working.
Anyone have 3G no longer working on their 3G? Any fixes work for you?

Connect your iPhone to your computer, open iTunes, and on the main iPhone section you'll see a restore button. Click it and it will take you through the steps. Be sure to backup your iPhone though, syncing it with iTunes will do this for you. Also take off your photos and so forth before you restore just to be safe.

After upgrading memory Ovolab Phlink no longer working

Similar Messages

Maybe you are looking for