After upgrading my iPad to iOS7, is lost the sound on my device. Is this a known problem and how can it be solved?

After upgrading my iPad to iOS7, the sound is lost on my device. Is this a known problem en how can it be solved?

The icon was moved to Control Center, swipe the screen up from the bottom.

Similar Messages

After upgrading my iPad to ios7, I lost the airplay icon. Is this a common problem.

After upgrading my iPad to ios7, I lost the airplay icon. Is this a common problem?

The icon was moved to Control Center, swipe the screen up from the bottom.

After upgrading my ipad to ios7, the block cookies setting only has one choice: "always."

After upgrading my ipad to ios7, the "block cookies" setting for Safari only has only one choice: "always." No option exists for "never block" or "allow third parties." Needless to say, this stops me from visiting a variety of websites. Any ideas on how to get those other options to display?

I met this question in a iPhone touch, at last we found the device was controlled by MDM profile before upgrade. After removing the Configuration Profiles in [Generals][Profiles], another two option display.

After upgrading my IPad to IOS7 the orientation is default portrait and I would like landscape?

After upgrading my IPad to IOS7 the orientation is default portrait and I would like landscape? How do I change it
.I have gone to Settings and rotation lock, does not change it and also to Control Panel with the same result?

Do you have a toggle switch on the side of your ipad, next to the volume? If so, try that.......it took awhile for me to find that answer by googling.......hope it works for you.

HT6050 After upgrading my ipad to ios7, its battery is getting charged way too fast and it drains at the same rate. I have been waiting for a new software update,to fix this, and nothing yet.....

After upgrading my ipad to ios7, its battery is getting charged way too fast and it drains at the same rate. I have been waiting for a new software update,to fix this, and nothing yet.....

Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

After updating my ipad to ios7 it is on recovery mode. Then I tried to reboot it and it shows an image to connect to iTunes. I tried to connect to iTunes and restore it but it says ipad could not be restored and an error occurred. What can I do now???

After updating my ipad to ios7 it is on recovery mode. Then I tried to reboot it and it shows an image to connect to iTunes. I tried to connect to iTunes and restore it but it says ipad could not be restored and an error occurred. What can I do now???

http://support.apple.com/kb/TS3694#error3194
This might help. Good luck, I really hope this all works out. :-)

Macbook upgraded from 10.5.8 to mountain lion. I lost the update when I tried to restore my old information. How can I get my update back without paying again?

I took my mac to an iStore in South Africa however my country does not have an iStore. Macbook upgraded from 10.5.8 to mountain lion. I lost the update when I tried to restore my old information. How can I get my update back without paying again?

Ok, that sounds like a valid approach...but now the question is, when you say you lost the upgrade when you tried to restore, exactly what do you mean? Restore from a Time Machine backup, or another kind of backup? What happened to the operating system when you did that?
If it damaged the operating system, you should be able to recover it by restarting your computer holding either the Option key (should result in a grey screen that shows the macintosh hard drive and a recovery hard drive), or by holding the Command and R keys while starting.
You can use the recovery hard drive to reinstall Mac OS X either way. If the Option key restart, click on the recovery hard drive to boot from that.
Then with either approach you will have a screen with a drop-down that gives you choices, such as install Mac OS X, Disk Utility, Terminal. You will want to use Install (or Reinstall) Mac OS X...note, you must be connected to the internet from this point on.

I was recently trying to buy 'Cloudy With a Chance of Meatballs' for my IPad, but it will not let me purchase the film, what is the problem and how can I fix it?

If someone could help out, it would be greatly appreciated

AnnoyedAppleUser2 wrote:
I was recently trying to buy 'Cloudy With a Chance of Meatballs' for my IPad, but it will not let me purchase the film, what is the problem and how can I fix it?
If someone could help out, it would be greatly appreciated
What does "it will not let me purchase it" mean exactly? Are you getting an error message?

Hi my iPad 3 screen cracked very easily I was surprised. Is this covered under warranty? How can I fix it?

Hi my iPad 3 screen cracked very easily I was surprised. Is this covered under warranty? How can I fix it?

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for:
iPad model
Out-of-Warranty Service Fee
New iPad
$299
iPad 2, iPad
$249
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You can get the glass replaced at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

HT1414 Why do I get 'This message has no content' with some e-mails on my iPad when the same messages can be received on my MacBook Pro without any problem, and how can I fix it?

Why do I get - 'This message has no content' - with some e-mails on my iPad when the same messages can be received on my Mac Book Pro without any problem and how can I fix it?

Is this a POP (POP3) email account? If so, you MacBook Pro may be retrieving the email and deleting it off the server before your phone can. Another possibility is that both your Mac and your phone are trying to retrieving it at the same time, and the POP server, which will only allow a single email client connection at a time, is locking out your phone resulting in the "has not been downloaded from the server" error.

TS4036 I am trying to restore with icloud on a new ipad. WHen I get to iCloud Sign In, it keeps timing out. Why and how can I fix this?

I am trying to restore with icloud on a new ipad. WHen I get to iCloud Sign In, it keeps timing out. Why and how can I fix this?

Sign out of old email and sign in with new.

Computer fails to boot up after password change. After new password keyed in, computer also asked for old password. But even when old password supplied, computer just freezes and fails to boot up. What is causing the problem and how can one solve it?

Changed password on MacBook Pro recently. But after password change. Computer ask for old password, thereafter. Even when correctly supplying the old password. Computer system does not boot up and just freezes. What is causing the problem and how can one resolve the issue?

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

After updating my iPad for ios7.0.2 the formatting across many apps has changed or lost; notes has lost its lines, sirfari is bear......

I recently updates for iOS 7.0.2 . I have now lost the formatting of apps such as notes (the lines has disappeared), Safari is bear. Any ideas

u can give try to using external enclosre and backup ur files. I hope u will get files back. or using external enclosre with ur hdd boot into Linux and try to mount ur harddisk.
there are multiple no of tutorial to mount apple partion in Linux.

After upgrading to Mac OS 10.9 My HP Deskjet F4580 all in one printer no longer scans. How can we fix it?

Hi All,
I recently upgraded to Mac OS 10.9 Mavericks, but now my HP Deskjet F4580 All in one printer will not scan any documents either as PDF or as JPG, how can we fix this?

I have simialr problems, after i scanned the ducuments or pictures, i can save it for only once, but the file is just black pictures with many lines through them. When i try to save it again, then it says ''An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.', which then doesn't allow me to do anything of saving the file or even just to print it out.

After upgrading my iPad to iOS7, is lost the sound on my device. Is this a known problem and how can it be solved?

Similar Messages

Maybe you are looking for