After upgrading my iphone4s to 6.1.2, it stopped vibrating.

After upgrading my iphone4s to 6.1.2, it stopped vibrating. I tried to change the settings and sounds. But nothing changes it. I even tried the iBrate app. I reset all the settings and it still doesn't work. Does anyone else face a vibration issue? It was working perfectly till the day before yesterday and got screwed after I upgraded it to 6.1.2.

I restored it and copied all the backed up data into the iPhone after the Restoration process and still it is in the same condition.

Similar Messages

After upgrading my iPhone4 to the latest IO it no longer connects to wifi, how do you fix this?

After upgrading my iPhone4 to the latest IO it no longer connects to wifi, how do you fix this?

knifepainter wrote:
What I know is that the phone worked perfectly fine until I upgraded the software. I've tried resetting the network settings to no avail. I've shut the phone off, put it in a ziplock baggie and then into the freezer for 15 minutes. This made the wifi work temporarily but then it goes back to being grayed out. The wifi does not work at other wifi sites away from my home as well. Seems like an apple issue to me and would appreciate someone coming up with a fix, apparently I'm not the only one having this problem. Thanks for replying to my query, any ideas?
It's likely a hardware issue. The iOS will not directly cause this issue.
Use this article first:
iOS: Wi-Fi settings grayed out or dim - http://support.apple.com/en-us/TS1559
If that fails to resolve it, then try setting it up as new and testing again.
How to erase your iOS device and then set it up as a new device or restore it from backups - http://support.apple.com/en-us/HT4137
If the issue remains even after set up as new, it's a hardware problem, not a software problem. You'll need to contact Apple for you hardware service options. If within warranty it should be free. If not, expect to pay $149 USD + tax if it's an iPhone 4, $199 USD + tax if it's an iPhone 4S.

HT4972 after upgrading my iphone4 to ios7.04, the 'restore' in itunes seems to be going round in circles resulting in the iphone wanting to continually 'restore' every time. Whats happening here?

after upgrading my iphone4 to ios7.04, the 'restore' in itunes seems to be going round in circles resulting in the iphone wanting to continually 'restore' every time. Whats happening here?

Hello Filbert,
Thank you for providing the details of the issue you are experiencing with your iPhone wanting to continually restore. I found an article with steps to address the issue you described:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please try to troubleshoot security software issues.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Thank you for using Apple Support Communities.
Best,
Sheila M.

After upgrading to OSX Mavericks my BT peripherals temporarily stop working

I have a MacBook Pro 2009 with 4GB Ram, my only BT peripherals are a Logitech BT keyboard and Apple Magic Mouse. After upgrading to OSX Mavericks the day of it's release the overall performance of my MacBook was increased and I was/am very happy with it. My major gripe/annoyance is that upon opening a new application BT connectivity is totally lost and I have to revert back to my MacBook's keyboard and touchpad for a few seconds before BT comes back, and when it comes back it works flawlessly until I open another app or switch between certain apps. This issue is new since the OSX Mavericks upgrade, and my hardware setup has remained unchaged from day 1. It sounds like a software issue, and I was wondering if anyone else has had the same problem or has discovered a solution. I have cycled power on the machine, and have left it completely off for 24 hrs before booting it back up with the same issue. This isn't major, just annoying. The only other thing I have is with Mail and my GMail account seeming not to sync up correctly. Messeges archived on my iPhone 4S still show as unread on my Mail app even hours after the archive and both devices on the same wireless network, This never happened before the upgrade to OSX Mavericks... Everything used to sync up perfectly... Anyone have any ideas as to what may be going on??? Thanks!!

Thanks Barry!!! I only reset the SMC and after booting up the system, bluetooth has maintained connectivity after switching between apps, open/closing apps works just as before!!! Thanks again!!! I can't believe such a simple work around would fix such an annoying issue. BTW I didn't reset PRAM, didn't see the need to because everything works just fine now. If I could only get the Mail app to correctly sync up I'd be perfect!

After upgrading, I am getting the dreaded "iTunes has stopped working" message. I've followed all of the troubleshooting tips on the forum without success. Fortunately, it works on my other computers. Running Win7 pro.

After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??

My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi

Sim card was not detect after upgrade my iphone4s to ios 6.0.1

my sim card was not detected after i update to ios 6.0.1
i had ald try many time plug in n out my sim card it keep on show searching no service or no sim
i had reset my network setting n i reset all n now i cant activate my iphone

Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e0f22e92de98ebae10e 3fd537c16619e.jpg

HT202360 After upgrading to Server 2.2, my mail server stopped forwarding. How to get i started again ?

I'm runnig a ML Server with mail server active and two mail domaines. Before updating the server app. everything worked fine. All my user where logged inn with [email protected], and [email protected] was forwarding to [email protected] After the update to server 2.2, forwarding stopped working.
Any one know how to fix ?

Sorry- I made a mistake on that.
IGNORE BOTH DIRECTIONS ABOVE:
Revert the setting back to just your primary domain:
sudo serveradmin settings mail:postfix:mydomain = "domain.com"
sudo postfix reload
The config errors should stop now.
############# What you really should do ###############################
If you don't need virtual domains (and I don't think you do):
Do this:
sudo pico /Library/Server/Mail/Config/postfix/main.cf
Scroll towards the bottom (many pages) and on the last page you should see:
mydestination=
It will probably look like this:
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
simply add your second domain to the end of whatever is there separated by a comma
So it would be this:
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, myotherdomain.com
Then reload postfix with:
sudo postfix reload
That shoud do it.
Sorry about the confusion

Re: Right after Upgrade the Sony Blu ray player BDV 790W stopped working.

Hi,There was no resolution and they asked me to send it for repair and pay for it. Thanks,N790W

Hi Vikram,
Thank you for bringing your concern to Sony’s attention. We understand where you’re coming from however, there are a lot of factors that can affect your unit. A technician from an authorized service center can determined the exact issue as to why your unit stopped working. Please be advised that Sony does provide a warranty for all products to allow for initial failures to be covered at Sony’s expense. Once the warranty expires, it is the customers responsibility to cover repair costs. I have sent you a private message. Kindly check it.
Thanks,
AmyB

Cannot search messages after upgrading to iOS7!!!

After upgrading my iPhone4 to iOS7 today, I noticed that it cannot search SMS Messages for information. To be exact, it only searches messages that have been sent/received after the upgrade. It seems it hasn't cached older messages and keeps ignoring them when searching for something. Any help? Is it a bug?

Same problem here with 4S updated to IOS 7 via OTA.
I have solved the problem by connecting the phone to Itunes, backing up, re-installing IOS7 and restoring from the backup.
Now everything is fine and all messages are indexed.
I hope this helps!
F.

VPN no longer working after upgrade to Mountain Lion

After upgrading to Snow Leopard, the Cisco VPN client stopped working.   This was due to the fact it ran in 64-bit, but SL allowed you to switch to 32bit which then the app still worked.
You also had the choice of using the MacOS 'VPN' program, but it always disconnected quite often for me.
After the upgrade, the Cisco VPN client no longer works at all, I assume again due to the fact 32bit is no longer around, however the Mac VPN client no longer works either. It will connect, however no traffic goes over the VPN (it gets blackholed) rendering it useless.
I have this behavior on multiple Macs, so I'm not sure if this is a known issue, or if the Mac VPN client no longer plays nice with the Cisco ASA firewalls?

It appears that ML no longer supports 32bit applications at all.
Therefore, you have 2 options:
1) Use the built in VPN client, you will need your IT's help for this as it requires the group name and password of your VPN server.   You can configure it by going to System Preferences -> Network and 'adding' an VPN (Cisco IPSec) interface.   I haven't had much luck with it, it works sometimes and sometimes it fails, but other people swear by it.
2) Move over to the Cisco AnyConnect VPN client, which does support 64bit. This will also require your IT department as they need to configure the SSL/AnyConnect VPN on the VPN device itself.   I went to this method yesterday and it's worked out great so far.

IPhone 4 home button doesn't work after upgrading to IOS 7

After upgrading to IOS 7 today, my home button stopped working. Just curious if anyone has experienced this? It worked at for a few hours, then all the sudden it stopped. Maybe it just randomly broke. I've never had an issue before today. Thanks for the help.

Well, it just, randomly, started working. I didn't do anything.

Flex 2 TouchPad Right-Click Not Working After Upgrade

Hi, I recently upgraded my Lenovo Flex 2 (15 inch) notebook from Windows 8.1 to Windows 10. After upgrading, the right click button on my touchpad stopped working. Suspecting a driver issue, I uninstalled the driver to allow the default Windows driver to take over. The right-click button started to work again, so it's not a hardware problem. However, the touchpad, in general, became erratic and difficult to use. I then downloaded the latest Lenovo Flex 2 touchpad driver for Windows 10. However, the touchpad returned to the way it was after the upgrade and the right-click button does not work. Please help me with this. I need my laptop to function properly during my travels. Kind regards, Ash

Try a two-finger click.
You can change your secondary click settings here:
System Preferences > Trackpad > Point & Click > Seconday Click > Select the an option from the drop down

Why has my licensing stopped working after upgrade to ios Yosemite

after upgrade to IOS Yosemite, licensing for PSE has stopped working. error code 150:30. Any ideas what I should do

Hello Jarcel,
If you are not able to access the cellular network on your iPad, I recommend reviewing the steps in this article:
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device. phone no good without a home button

The button's broken. S**t happens. Apple will replace your phone. If in waranty it will be free of charge. If not, you will pay $149.
You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

After upgrading iTunes on iPhone4, text displays as squares

After upgrading iTunes on iPhone4, the text is displaying as squares and symbols. Does anyone know how to fix?

Hey ethrib!
I have a couple of articles for you that will help you troubleshoot these issues. First, here is an article that will help you troubleshoot your connection to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Next, here is an article that may help you troubleshoot this issue with your iOS devices not being able to sync:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for using the Apple Support Communities. Have a good one!
-Braden

After upgrading my iphone4s to 6.1.2, it stopped vibrating.

Similar Messages

Maybe you are looking for