After upgrading to ics is it necessary to wipe cache clean, and how do i do it

after upgrading to ics is it necessary to wipe cache clean, and how do i do it. My phone slowed down greatly
thanks for your help

It don't hurt to do it but it depends on how your device is running.. here is the Full instructions
These are the Instructions on Clearing the Cache Partition:  For Razr & Razr Maxx
Top Alternate method
Power the device off.
Press the Power button then select Power off.
If the device doesn't respond to input, press and hold the Volume Up / Down then press and holdPower button. When the device screen goes blank release the Power button while continuing to holdVolume Up / Down, proceed with step 3.
Press and hold the Volume Up / Down then press the Power button.
When presented with the Boot Mode Selection Menu release all buttons.
Press Volume Down to select Recovery then press Volume Up.
From the Droid triage screen, simultaneously press Volume Up / Down.
Select Clear the Cache Partition then press the Power button.
Select reboot system now then press the Power button.

Similar Messages

  • After upgrading to Firexfox 35.0 all vine videos, instagram videos and some webplayer videos dont work anymore.

    After upgrading to Firexfox 35.0 all vine videos, instagram videos and some webplayer videos dont work anymore.
    I get messages like:
    ERROR 1
    -Error Loading Media: File Could Not Be Found
    http://i.imgur.com/5OaxOFC.jpg
    ERROR 2
    -Video can't be played because file is corrupt.
    http://i.imgur.com/cqRpJOp.jpg
    Before I start, I will like to point out some things Ive tried already so this doesnt end up being a back and forth of things already tried.
    *Ive uninstalled adobe flash player
    *Ive tried the whole
    media.windows-media-foundation.enabled to false or to true
    *Ive gone into safe mode and nothing
    *Ive tried toggling off the plug-ins to see if anything I have problems with works. Nothing.
    All the media that plays from different various players:
    https://www.youtube.com/watch?v=v7IXmV6A6Bk
    http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
    http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed <-- 2 embedded videos that both play.
    All the media that wont play:
    http://www.jwplayer.com/ <---- that front page video : I get ERROR 1 for this
    http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA <--- I get ERROR 1 for this
    And every vine and instagram video. Since I will be asked to post something from it here is something from vine and something from instagram
    https://vine.co/v/OqxKQBJd3lm <---- I get a still image
    http://instagram.com/p/up3CG6ooDP <----- I get error 2 if I go into page info and click the media tab and look for the video.
    All my enabled plugins:
    http://i.imgur.com/9fCZ1s2.jpg
    Everything on my permissions even on the pages of the media I cant play is set to : Use Default.
    Now, I thought this was just some kind plug-in problem, I even thought it was just something with the updated made Firefox incompatible with some of the webplayers. Of course I found out this was wrong. Keep on reading:
    If your flash plugin crashes or if you terminate/end process in the Task manager, your video will be replaced by this grey message:
    http://i.imgur.com/vudnNIM.jpg
    https://www.youtube.com/watch?v=v7IXmV6A6Bk
    http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
    http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
    http://www.jwplayer.com/
    http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA
    Now, all these videos I listed before, If I had them all open in tabs and then proceeded to terminate my flash plugin in Task Manager, they would all be replaced by that grey message window that the plugin crashed.
    Now, after I updated firefox to 35.0, if I did the same thing
    https://www.youtube.com/watch?v=v7IXmV6A6Bk
    http://bestanimes.tv/mushishi-zoku-shou-2nd-season-episode-10/
    http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
    These three would show that grey message and these are the ones I can play
    But these 2 the ones I have a problem with.
    http://www.jwplayer.com/
    http://videomega.tv/?ref=AJWOLaJQKbbKQJaLOWJA
    they wont even be affected by it. Its like they arent even using the flash plugin.
    Whenever I would terminate/end process my plugin from my task manager in 34.0 EVERYTHING, EVERYTHING would not work including every vine video and instgram video, it would either show that grey message that says the plugin crashed or it would not work. They would all work again when I refreshed the page. Everything, in 34.0 in my firefox was using the flash plugin.
    Now, as I stated above I thought it was just some kind of webplayer and firefox 35.0 conflict that was causing these problems.
    Until I saw this:
    http://www.watchcartoononline.com/mushishi-episode-26-english-dubbed
    http://i.imgur.com/gCaUMXm.jpg
    http://i.imgur.com/V9w7ulS.jpg
    http://www.jwplayer.com/
    http://i.imgur.com/dqZtoTX.jpg
    They are both using the same exact webplayer. THE SAME ONE.
    I can play the first one
    but the video in the front page of http://www.jwplayer.com/ I cant play it.
    Which brings me to my final conclusion.
    The reason I cant play some that fron page video of http://www.jwplayer.com/
    videos from videomega.tv
    and instagrams and vines
    IS because of their file extension, their file types.
    I went to the firefox options and clicked the Applications tab:
    http://i.imgur.com/uWWKelX.jpg
    http://i.imgur.com/HYBjwdZ.jpg
    http://i.imgur.com/IK4C2WR.jpg
    Shouldnt all those video file types be in : Use Shockwave Flash (in Firfox) instead of : Always ask
    When I try to toggle it to something else I dont even get the option to use Shockwave Flash
    http://i.imgur.com/gTH18S1.jpg
    In Conclusion, what gives??
    -In 34.0 Everything worked.
    -If I terminated/ended process the Flash plugin in 34.0 everything would be affected by it , either by not working anymore or showing me that grey crash message.
    -This all started when I upgraded to 35.0
    -Has nothing to do with webplayer conflicting with 35.0 as proven above.
    -The reason for all of this not working is the type of video extension they have. Judging from the examples I gave of the things I cant play, it would seem I cant play mp4, flv and whatever vine uses. Which I think its mp4 as well.
    Anyways, how do I fix all this so it works like it did before I upgraded to 35.0

    I looked at that but it only shows for Windows 8.1 , 8.0 , 7 , i have Vista , 64 bit Ultimate , would the Windows 7 one work ?? , or am i out of luck ?
    And what plug-in icon in the address bar ?? , i don't see anything that pertains to any plug-ins
    This is a example of one of the videos i was trying to watch , basically when you click the arrow in the center , it just goes away for a second then comes back and the video never plays , it just sits there , in the lower left corner i see a small popup that says javascript;
    http://instagram.com/p/zAA6W8DAR9/?modal=true

  • After upgrading software to 5.0, I lost my Contact List. How do you retrieve it.

    After upgrading software to 5.0, I lost my Contact List. How do you retrieve it.

    Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

  • After upgrading to windows 7, HP CP1215 only prints in black and white !! any Idea any one??

    After upgrading to windows 7, HP CP1215 only prints in black and white !! any Idea any one??
    Connected to a Dell 1525 laptop via usb cable

    Unplug the printer, and uninstall it. Then download the Windows 7 CP1215 plug and play driver package from www.hp.com. Install the printer using that package.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Random audio interruptions. I'm getting audio snippets, no more than a word or syllable, about 20 times per hour. Emanates from Mac internal speakers. Started after upgrading to OS 10.9.5. What is it? How can I stop it?

    Random audio interruptions. I'm getting audio snippets, no more than a word or syllable, about 20 times per hour. Emanates from Mac internal speakers. Started after upgrading to OS 10.9.5. What is it? How can I stop it?

    Hello Achates:
    I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    In that way, you will have a fresh copy of OS X and your current settings will be preserved.
    Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
    Barry

  • After upgrading my IPad to IOS7 the orientation is default portrait and I would like landscape?

    After upgrading my IPad to IOS7 the orientation is default portrait and I would like landscape? How do I change it
    .I have gone to Settings and rotation lock, does not change it and also to Control Panel with the same result?

    Do you have a toggle switch on the side of your ipad, next to the volume? If so, try that.......it took awhile for me to find that answer by googling.......hope it works for you.

  • Hi there. Can a MacBook from mid 2007 running OS X (10.6.8) be upgraded to a later version? If yes which one and how can I get it please? Many thanks. Franck

    Hi there. Can a MacBook from mid 2007 running OS X (10.6.8) be upgraded to a later version? If yes which one and how can I get it please? Many thanks. Franck

    10.7 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store.  The price is $19.99.
    You must have at least a Late 2006 model 2,1 MacBook.
    The model 2,1 (Late 2006 & Mid 2007) can use 3gb of 200 pin 667mhz PC2-5300 RAM
    The model 3,1 (Late 2007) can use 6gb of 200 pin 667mhz PC2-5300 RAM
    Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. You can put two 2gb RAM sticks in the model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
    http://en.wikipedia.org/wiki/3_GB_barrier
    http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
    OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. the model 2,1 is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
    As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • After upgrading to ICS my Xperia mini (ST15i) hangs and reboot itself?

    Ah I was very happy after getting official ROM of ICS but my happiness goes down very soon because now I'm facing many problems with my phone. 
    It is hanging most of the time at least once or twicw in a day, sometime hangs and reboot itself but sometime I have to estart it by remove the battery. When it hangs if my battery is at 90% and I remove the battery and put it back and restart it then it goes down to near about 70% or less. 
    Phone dial pad is very slow to open than 3rd party softwares. Back and Option key response very slow. I know this could be performance issue but this is too much.
    However many apps goes to hang, mostley my browsers I wa using Boat and Dolphin HD browser and after upgrading I tries Chrome which also hangs. My phones battery drain so fast now also my phone heat too.
    I tried to contact the support thorugh E-mail but still yet no reply so I'm here to ask this please help me guys. I have very slow bandwidth so please suggest me the good way to solve this problem. I don't want to downgrade but if its neccessary then I'll.

    regarding the phone/dialer download Dialer One
    regarding your battery life, you should check which apps are causing this
    charge your phone 100% use it as you normally would then once it reaches 10%
    settings > battery > take screenshots of this list an the graph, also tap on each item and take screenshots post them here
    delete taskillers, antivirus, battery apps, ram apps as they slow down your phone, drain your battery and cause a lot of issues.
    Don't forget to mark the Correct Answers & Helpful Answers
    unrelated topic, if you have some time please check this thread
    http://talk.sonymobile.com/thread/44888
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Problem after upgrading to ICS 4.0.4

    i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
    thanx for your help

    Do you have many pictures?
    Have your tried to reinstall the phone software using SUS to check if the problem remains?
    http://www.sonymobile.com/gb/tools/update-service/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • After upgrading to Mountain lion I can not any more send and receive emails

    I am not able to send/receive emails on Apple mail after upgrading to Mountian lion. I am using exchange account + pop/smtp account.
    All settings are still the same and were working on Lion version. Please help.
    thanks

  • After upgrading to iOS 5, I lost my contacts, calendar entries, and Notes on my iPhone 3GS (3 years old). How do I retrieve them? My last backup/sync to iTunes acct was Sept 18 but yesterday's backup bombed due to lack of space on my C: drive.

    Yikes! After upgrading my iPhone 3GS to iOS 5, I lost my Contacts, calendar entries, and Notes (100+) on my iPhone (3 years old). How do I retrieve them? My last backup/sync to iTunes acct was Sept 18 but yesterday's backup bombed due to lack of space on my C: drive.

    This happened to me too but it was really all there.  Go to your calendar, click on calendar in the upper left hand corner, click on show all calendars, click done in the right upper corner.  Everything should show up!!!
    I was super thrilled.  Hope this works for you!!

  • After upgrading to iOS 8.3, the keyboard has frozen up  and I can no longer text or access my contacts.  I've re-booted the phone several times, to no avail.

      After upgrading to iOS 8.3, the keyboard has frozen and I can not longer text or access my contacts.  I literally just upgraded to an iPhone 6, but I'm just about ready to can this phone and go with an Android.  Can anyone help or have the same issues?

    Im having the same problem. This started with iOS 8 and Yosemite. Im in a group message with 10 people with and without iPhones. Currently have 9 threads and when ever a new person responds a new thread forms. they all have the same people but in a different order, that may be part of the reason why iMessage doesn't recognize them as the same conversation.
    As I'm writing this post 3 new threads opened and other people with and without iPhones are mentioning the same problem
    hope apple can fix this. VERY annoying

  • After upgrading to OS X Mavericks syslogd needs lot of memory and cpu, system is very slow

    After upgrading to OS X Mavericks the system is very slow. securityd and syslogd are using 50% of cpu and memory is also used by syslogd and kerneltask (8 GB out of 12). After rebooting the system it runs very well, a view days later (without reboot, only hibernating) the situation is the same.
    Looks like a problem in OS X. Any solutions?

    I haven't worked out the LDAP messages but I noticed at other times I was seeing lots of album art messages from BlackBerry desktop. I'd already uninstalled the app but it still had processes running. I followed this link to remove completely; http://apple.stackexchange.com/questions/57023/how-to-uninstall-completely-black berry-device-manager
    CPU levels have been noticeably lower ever since.

  • Some videos are not showing in Apple TV playlist after upgrade to 6.0.  Can play on Macbook itunes and using airplay to Apple TV.  Anybody else have this issue?

    Some videos are not showing in my Apple TV playlists after upgrade to 6.0.  They were there prior to upgrade and I can play on Macbook itunes and also using using airplay to Apple TV.  Anybody else have this issue?

    Ok, so I'll try again.  Thank you for the idea of looking in Home Videos, which is where all my "lost" videos are listed.
    Is there a way to get them to display under their appropriate genre in the Movie section, which is where they all were listed prior to the os6 update?  It does me no good to have hundreds of movies categorized in iTunes via a genre only to have them appear in Home Videos on ATV.  These are not "home movies." They are legit mp4 movies that worked great under v5.

  • After upgrading to ios8 iCloud won't recognise password on iPhone and iPad only on my Mac Mini and Macbook Air

    After upgrading to ios8 my iPad and iPhone could not sign in to iCloud. The error was either 'server error' or verification failed. I reset the password and verified I could log in via my Mac Mini and Macbook Air but I still get the error on my two iPads and iPhone that verification failed.

    somehow, after delinking my apple(icloud) id with iphone, i erased my iphone to start with new, in hope that it should work now, but nothing seems to be working,
    now my iphone is blank, i erased all data and after trying several times, its showing while setting up iphone.
    Could Not Sign In
    There was an error connecting to icloud.
    also after upgrading to ios8. i m unable to login even at website icloud.com
    there is something like this
    Connection error
    icloud encountered an error while trying to connect to the server.

Maybe you are looking for

  • Can't capture anymore.. please help!

    hi, i've been using mdt 2010 in the last 4ish years to deploy several hundreds of machines. now due to some mysterious reason, capturing doesn't work anymore. the visible symptom is a error message containing something about the clonetag registry ent

  • Custom cropping using pixel dimension

    The banner image module for my website requires images cropped to 940 x 400 pixels. When I use the Custom cropping function in PSE 12 (on a Mac OSX 10.9.2), it only shows a cm dimension. Can I do a custom crop using a pixel dimension?

  • How To Automatically Create Planned Orders When Sales Order Is Saved

    I have a MTO sceanrio where we need to create planned orders when sales orders are saved without running MRP. I have the Planning Strategy Group set to 81 in the material master, but it didnt create the planned orders. Could you tell me other setting

  • Aging calculation with Special periods

    Hi all, I have a asset cube (Cumulative movements) to store values by fiscalyear/period including special period (P13-P16) and requirements to get aging report based on fiscal year/period and report as follows.                                 Curent

  • Reset order item's status

    Hi, I have a before_change event for order item status. When user change status to suspended, function module assigned to event is called and a popup will appear asking user to enter reason for suspend. If user cancels the popup we want to reset the