After upgrading to ICS my Xperia mini (ST15i) hangs and reboot itself?

Ah I was very happy after getting official ROM of ICS but my happiness goes down very soon because now I'm facing many problems with my phone. 
It is hanging most of the time at least once or twicw in a day, sometime hangs and reboot itself but sometime I have to estart it by remove the battery. When it hangs if my battery is at 90% and I remove the battery and put it back and restart it then it goes down to near about 70% or less. 
Phone dial pad is very slow to open than 3rd party softwares. Back and Option key response very slow. I know this could be performance issue but this is too much.
However many apps goes to hang, mostley my browsers I wa using Boat and Dolphin HD browser and after upgrading I tries Chrome which also hangs. My phones battery drain so fast now also my phone heat too.
I tried to contact the support thorugh E-mail but still yet no reply so I'm here to ask this please help me guys. I have very slow bandwidth so please suggest me the good way to solve this problem. I don't want to downgrade but if its neccessary then I'll.

regarding the phone/dialer download Dialer One
regarding your battery life, you should check which apps are causing this
charge your phone 100% use it as you normally would then once it reaches 10%
settings > battery > take screenshots of this list an the graph, also tap on each item and take screenshots post them here
delete taskillers, antivirus, battery apps, ram apps as they slow down your phone, drain your battery and cause a lot of issues.
Don't forget to mark the Correct Answers & Helpful Answers
unrelated topic, if you have some time please check this thread
http://talk.sonymobile.com/thread/44888
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Xperia Mini ST15i Software Update

    Hi my name is Priyavrat  i want to update my Xperia mini ST15i (india) from GingerBread to ICS can i do it & which one should i do (4.1.B.0.587) or (4.1.B.0.431)...?????

    If you haven't received ICS then you are not going to get it unless you manually update your phone
    How to manually update, downgrade, root 2011 Xperias
    http://talk.sonymobile.com/thread/38251
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • After upgrading to ics is it necessary to wipe cache clean, and how do i do it

    after upgrading to ics is it necessary to wipe cache clean, and how do i do it. My phone slowed down greatly
    thanks for your help

    It don't hurt to do it but it depends on how your device is running.. here is the Full instructions
    These are the Instructions on Clearing the Cache Partition:  For Razr & Razr Maxx
    Top Alternate method
    Power the device off.
    Press the Power button then select Power off.
    If the device doesn't respond to input, press and hold the Volume Up / Down then press and holdPower button. When the device screen goes blank release the Power button while continuing to holdVolume Up / Down, proceed with step 3.
    Press and hold the Volume Up / Down then press the Power button.
    When presented with the Boot Mode Selection Menu release all buttons.
    Press Volume Down to select Recovery then press Volume Up.
    From the Droid triage screen, simultaneously press Volume Up / Down.
    Select Clear the Cache Partition then press the Power button.
    Select reboot system now then press the Power button.

  • After upgrade to ios7 on iPad mini, iTunes Store shows a blank white page.

    After upgrade to ios7 on iPad mini, iTunes Store shows a blank white page. I ve rebooted, restored, reset, still not working.
    Also having issues with some of my apps which I use to use every day before the upgrade.  Nightmare....
    What can I do to solve this problem? 

    You didn't mention which reset you tried that didn't work ...
    Try this reset ...
    Tap Settings > General > Reset > Reset All Settings
    Then restart your iPad.
    Try the iTunes Store.
    No data is lost due to a reset.

  • After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

    After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
    I tried quitting and starting again but it just jumps back to the same spot.

    It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
    (I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

  • After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.

    After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
    After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
    In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".

    Well, I found the solution here in another thread.
    i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
    So I found the solution here.
    Thank you graphicsluc!!!

  • Issues after upgrading to 10.2.0.4  ( both OMS and Agent)

    All,
    we are observing this error quite a lot after upgrading to 10.2.0.4 ( both oms and agent)
    2008-07-31 15:08:19,088 Thread-228 ERROR : (nmevrr.c,328):Memory 0x0 encountered, expect struct_id=12201
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:snmeuctx_setGenCtx+0x912
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nme_class_error+0x184
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmevrr_Recvlet_refreshState+0x264
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmevrg_RegisteredRecvlet_refreshState+0x228
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmevrm_RecvletManager_init+0x5544
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmecmgr_discardState+0x1792
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmecmgr_discardState+0x376
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmemdisp_GetMetric+0x10212
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmemdisp_GetMetric+0x15664
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmehl_disabled_remote_ops+0x2600
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmttprutc_reconfigUsingTargetCount+0x448
    /u1/app/oracle/product/10.2.0/agent10g/lib32/libnmemso.so:nmttprutc_reconfigUsingTargetCount+0x596
    /lib/libc.so.1:_thr_slot_offset+0x1132
    we have these patches 7012242,7031906,5961654,5632264 installed on the agent home.
    I have also disabled the instance health metrics for all the 10g target db on this host.
    Anybody has any idea how to resolve this . This is becoming quite annoying .
    thanks in advance
    pk

    Hi,
    Just to comfort you, and yes we do monitor 10.2.0.3 instances. This comes from the emagent.trc on one of many rdbms server. The same is not found on other servers running 10.2.0.3 instances. The time coincide with an agent crash on this server. Keeping an eye on this thread while trying to find out what it is related to.
    EDIT: This is due to bug 7012242, see metalink docId: 579137.1
    2008-08-15 05:30:03,081 Thread-689845 ERROR : (nmevrr.c,328):Memory 0x0 encountered, expect struct_id=12201
    /oracle/product/agent10g/lib32/libnmemso.so:snmeuctx_setGenCtx+0x912
    /oracle/product/agent10g/lib32/libnmemso.so:nme_class_error+0x184
    /oracle/product/agent10g/lib32/libnmemso.so:nmevrr_Recvlet_refreshState+0x264
    /oracle/product/agent10g/lib32/libnmemso.so:nmevrg_RegisteredRecvlet_refreshState+0x228
    /oracle/product/agent10g/lib32/libnmemso.so:nmevrm_RecvletManager_init+0x5544
    /oracle/product/agent10g/lib32/libnmemso.so:nmecmgr_discardState+0x1792
    /oracle/product/agent10g/lib32/libnmemso.so:nmecmgr_discardState+0x376
    /oracle/product/agent10g/lib32/libnmemso.so:nmebb_uploadTargetState+0x928
    /oracle/product/agent10g/lib32/libnmemso.so:nmebb_updateBlackoutInfo+0x384
    /oracle/product/agent10g/lib32/libnmemso.so:nmesse_executeWork+0x132
    /oracle/product/agent10g/lib32/libnmemso.so:nmttprutc_reconfigUsingTargetCount+0x448
    /oracle/product/agent10g/lib32/libnmemso.so:nmttprutc_reconfigUsingTargetCount+0x596
    /lib/libc.so.1:_thr_slot_offset+0x1128
    Message was edited by:
    ivirnig

  • After upgrading to IOS 7 on my iPhone 4 and iTunes 11 on my PC, I plugged my iPhone into my PC and got the error message that I needed to install iTunes 11 on my iPhone. Any suggestions?

    After upgrading to IOS 7 on my iPhone 4 and iTunes 11 on my PC, I plugged my iPhone into my PC and got the error message that I needed to install iTunes 11 on my iPhone. Any suggestions?

    You got it downloaded and I assume you mean it is installed as well.  It was buggy for me.
    I had to close and restarted iTunes before I could use it properly.
    Then, I had to unplug and replug in my phone before it recognises it.
    Just had to try everything.  As final choice, update over the air.  I try to avoid it as it tends to have more problems than a tethered update.

  • Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit

    Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    * https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
    See:
    * http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
    * https://support.mozilla.com/kb/Mozilla+Crash+Reporter
    * https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

  • After bios update, my window media player got hang and headphone clarity is not proper

    HP Pavilion g6  after bios update, my window media player  got hang and headphone clarity is not proper

    Hello mathewstays,
    Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Iphone4 upgrade ios5.0.1, done upgrade and reboot itself, iphone stuck at sos mode. need help!!

    iphone4 upgrade ios5.0.1, done upgrade and reboot itself, iphone stuck at sos mode. need help!!

    By "sos mode" do you mean recovery mode?  If so, you have to connect it to iTunes and restore it.

  • Problem after upgrading to ICS 4.0.4

    i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
    thanx for your help

    Do you have many pictures?
    Have your tried to reinstall the phone software using SUS to check if the problem remains?
    http://www.sonymobile.com/gb/tools/update-service/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Problems after upgrading to Adobe Digital Editions 4.0.3 and borrowing books from a library??

    After upgrading to Adobe Digital Editions 4.0.3, I am having problems downloading borrowed library books to my nook.  I get the message 'This book has been returned.  Loan not on record.'  It worked fine before the upgr

    After upgrading to Adobe Digital Editions 4.0.3, I am having problems downloading borrowed library books to my nook.  I get the message 'This book has been returned.  Loan not on record.'  It worked fine before the upgr

  • IPad2: After upgrad to iOS 8, video output lost left and right side

    I have a cable for my iPad2, once plugged in the bottom slot, it outputs video to TV Component port and audio to my amplifier. It's been working for years. After iOS 8 upgrade, I notice the video output lost left and right side. It's like
    [before iOS 8]     Apple iPad is a wonderful product for me.
    [after upgrade]             iPad is a wonderful product
    The "Apple" on the left, and "for me." on the right of screen is gone in output.

    Change your Aspect Ratio on your TV to 16:9

  • I cannot connect after upgrading Firefox. I work in corporate environment and cannot change security settings. Why this feature was not tested before upgrading to current version?

    I cannot connect to ANY web sites (for example, yahoo, google, etc.

    [https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
    see also [https://support.mozilla.org/en-US/kb/Firewalls Firewalls]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Maybe you are looking for

  • Problems conncecting my 20" cinema display (Previous Version) to a PC

    Problem description: Originally, a 23" cinema display (Previous version as well) was connected to my PC via DVI to ADC adapter. This morning, I tried to connect the 20"(Previous Version) to the same PC, it wouldn't power itself up~~~ After turned the

  • Trouble in connecting with windows xp client

    Hi I am using windows 2008 r2 enterprise server. Actually I have downgraded 2012 licence to 2008.  I have configured it for PEAP-MSCHAPV2 using NPS and active directory. But windows xp wireless client is unable to connect with PEAP or TLS. I got the

  • A/B tests are great - but what aspect is more important?

    What aspects of a MKL you test most? Or, in other words, what is the most questioned question? Is it the Subject line? Or maybe appearance? Sending time, your signature, addressing or something else? I am asking mainly because the question of what we

  • SelectStatement in a VarChar2: how to execute?

    Hello Everyone In my function I have a quite long algorithm. The code for this one is repeated 3 times since my function has a parameter where you can choose what kinds of data are put into the algorithm. So, in order to remove this redundant code I

  • How do I embed hyperlinks from Word 03?

    Hyperlinks from Word 03 do not work on pdf. The link is highlighted and underlined on pdf but doesn't work. Solution?