After upgrading to IOS 5.1.1 the Wi-Fi selection in settings greyed out and now says No Wi-Fi. Have tried restting and restoring both from te phone and from Itunes but this does not solve the problem.
I recently upgraded my Iphone 4s to 5.1.1 and founf the Wi-Fi button in settings greyed out saying No Wi-Fi. I have tried Reset network Settings, Rest All Settings and restore in Itunes but to no avail. I understand this is a comon occurence but I cant find a solution to it. Can anybody help?
See this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.
Similar Messages
-
My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.
By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position! -
I have tried to download Mavericks on my 2010 iMac(10.6.8), but nothing happens, not even the install app downloads, also I tried to download chrome, I moved it to the applications folder and when I opened the folder it wasn't there. I have a 1tb hard drive that is mostly empty. By the way I just got this imac used from a reseller.
Mavericks downloads into the Applications folder, where you can install it. Some Mac App Store Troubleshooting information and how to resume a download that was interrupted; some of the information here might get you an answer. Failing that, try contacting Apple Support.
-
I can't access half of my downladed music. I get a message, "can't locate file." I dauthorized my computer and reloaded itunes, but it did not help. Any suggestions? Thank you.
This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
I cannot send or receive group text messages and picture messages / MMS. The settings on Messages are already set to receive group texts but it does not help. What should I do?
Wow, 1yerdua. That's far too long to be having this messaging trouble. We want to find the resolution fast! If you turn off your Lumia's WiFi (Menu > Settings > WiFi), are you still able to access data-oriented applications like Internet Explorer? Have you been to other areas of the state/country and experienced the same trouble?
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
Has anyone else had this problem that just got one? This is a christmas gift and I was attempting to explore the radio feature and discovered the issue. Do we have this feature or not?? Thanks for any insight anyone can give. Thanks and Happy New Year!!
You are not pushing the headphones all the way in. Make sure the white plastic is flush with the iPod.
-
My points above lay out the problem and I get messages telling me it can't find the files....Why is it not working when it did just fine right up until you came out with version 4???
Any suggestions? I may have to go to another browser, but I have always like your product best.You are welcome. There has never been a need to move that one before, but try it since you can always put it back.
If the same, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite -
This message came out of the blue. I have made no changes to my computer or Premiere Pro.
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
Driver- Synaptics 15.3.22.0
Samsumg npqx411-w01us laptopThx for suggestion... but it is two fingers on this one, and please note that scrolling works fine in Chrome and IE... the issue seem to be related to Firefox browser in some way.
Hope you guys can help me out :S -
i had a iphone in 2010, i purchased music which is still stored on my original apple id, but when i try to transfer the music ,and download apps all it says is your apple id has been disabled, i have tried re setting a new pass word but this has not solved the problem can any one help please
Contact itunes support
-
I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my PC runs under Windows 8.1. and Iphone runs under IOS 7.1. Someone can help me, please?
It seems I have solved my own problem . . . well hopefully !! ;-)
I was using a 'non' Apple cable. When I swithced to using the stock cable that came with my iPhone, iTunes can now see that I have a 'Device' and identifies it correctly as my iPhone.
Hopefully this may help others . . . ?
Cheers,
Grant. -
Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?
Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated. -
Hi There,
My itunes quits unexpectedly when I try to login. I cannot even open the application, not sure why this is happening. Have upgraded my itunes and this has not solved the problem either. If anyone can help me out, that would be appreciated. ThanksHello balisurfergal,
Thank you for using Apple Support Communities.
For more information, take a look at:
Mac OS X 10.6: If an application quits unexpectedly
http://support.apple.com/kb/PH7044
iTunes 10 for Mac: May quit unexpectedly on launch
http://support.apple.com/kb/TS3494
Have a nice day,
Mario -
hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?
Read this
http://support.apple.com/kb/HT1808?viewlocale=en_US -
i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.
Maybe you are looking for
-
Hi, Here is the question that I faced in one of the interviews. How can we confirm whether this is an Inbound IDOC or Outbound IDOC just by seeing it? Plz give me answer for this....... Thanks, ravindra.
-
I have a X-Y Graph the has a plot of Temperature vs Time. The graph has curser that is locked to the plot. As I move the curser through different points the curser X and Y positions update. However if I move the curser over a point which has NaN Temp
-
Having a stressful day I was pleased to see the Tip of the Day on Microwave Safety. Duly noted. Cheers to the Development Team for a sense of humor and management for allowing it to be expressed. Jeff
-
I have this phone for like 2 weeks now, and I encountered this problem 2 times already - I put the mobile on the table with like 80% energy left, I go to sleep, and when I wake up, I find the phone turned off and it cannot be turned on again. At firs
-
Hi, Can someone please help me to get the co-ordinates (such as Latitudes, Longitudes) to render India Map in OBIEE 11g version? I did have sent mail to NAVQTEC for the same, but still no response. Can someone please help me in getting the Spatial da