After upgrading to IOS 7 on my iPhone 4 and iTunes 11 on my PC, I plugged my iPhone into my PC and got the error message that I needed to install iTunes 11 on my iPhone. Any suggestions?

After upgrading to IOS 7 on my iPhone 4 and iTunes 11 on my PC, I plugged my iPhone into my PC and got the error message that I needed to install iTunes 11 on my iPhone. Any suggestions?

You got it downloaded and I assume you mean it is installed as well.  It was buggy for me.
I had to close and restarted iTunes before I could use it properly.
Then, I had to unplug and replug in my phone before it recognises it.
Just had to try everything.  As final choice, update over the air.  I try to avoid it as it tends to have more problems than a tethered update.

Similar Messages

  • HT201210 I cant use my iphone because I'm getting the error message that I must connect to Itunes and when I do it says the only option I have is to restore my phone.

    I cant use my iphone because I'm getting the error message that I must connect to Itunes and when I do it says the only option I have is to restore my phone.

    Try using RecBoot or TinyUmbrella to kick it out of Recovery mode.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store

    While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.

    The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
    Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
    If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
    Good luck,
    Clinton

  • I have an apk file but get the error message that I need a plug in to watch videos. I cannot find such a plug in for android. Any clues please.

    I am embedding the following code per all guidance but this seems to want to invoke media player
    <pre><nowiki><OBJECT ID="MediaPlayer" WIDTH="192" HEIGHT="190" CLASSID="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
    STANDBY="Loading Windows Media Player components..." TYPE="application/x-oleobject">
    <PARAM NAME="FileName" VALUE="videofilename.wmv">
    <PARAM name="autostart" VALUE="false">
    <PARAM name="ShowControls" VALUE="true">
    <param name="ShowStatusBar" value="false">
    <PARAM name="ShowDisplay" VALUE="false">
    <EMBED TYPE="application/x-mplayer2" SRC="videofilename.wmv" NAME="MediaPlayer"
    WIDTH="192" HEIGHT="190" ShowControls="1" ShowStatusBar="0" ShowDisplay="0" autostart="0"></EMBED>
    </OBJECT></nowiki></pre>

    Microsoft never produced a Windows Media Plugin for Android. I doubt they every will as Windows Phone and Android are direct competitors.

  • II have downloaded several Apps that state they work with iTouch but they will not install and give error message that I need updated software, while all my updates available are installed on both iTouch and my computer iTunesWhy will Mindtools app not

    My iPod Touch will not function with certain updated apps ie MindTools, YP.com, Mint, Ymessenger etc and I get the error message that I need to install updated software to load these apps to my iPod Touch; however, I have double checked and all the software updates have been loaded in obht the iPod touch and my computer. There are no updates availabe; yet the error message on App is a software update is required for App. "was not installed because it requires a newer version of iPod software."
    The iPod Touch is using 3.1.3 software and it tells me that is the current and updated software version.

    You are correct in that your 1G iPod Touch has all the latest software updates.  It can only be updated to version 3.1. 
    However that Apps you are trying to download and install likely require iOS version 4.0 or later, which is not compatible with your iPod Touch.  So either you'll need to buy a newer iPod Touch or find other Apps that are suitable replacements if possible. 
    Sorry.
    B-rock

  • TS1424 Every time i want to sign in to my account i receive the error message that my apple id has not been used yet and then i get the message to contact the itune support

    Every time i want to sign in to my account i receive the error message that i need to contact itune support

    Welcome to the Apple Community.
    Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them.

  • HT1551 When use AirPlay to watch hbo go from my iPad on through my tv using Apple TV suddenly it stops and I get an error message that it needs to be played back using hdcp something or other.  Then I can't get it to come back on. Any ideas what is going

    When I use airplay to watch hbo go through Apple TV it starts running. However for no apparent reason it will suddenly stop and the error message that I need hdcp something comes on and then I cannot continue watching it. It is so random happening after 40 min of viewing or 15 min or sometimes not letting it start at all. Support topics are no help. Any ideas?

    When I use airplay to watch hbo go through Apple TV it starts running. However for no apparent reason it will suddenly stop and the error message that I need hdcp something comes on and then I cannot continue watching it. It is so random happening after 40 min of viewing or 15 min or sometimes not letting it start at all. Support topics are no help. Any ideas?

  • Im really confused. My ipod was giving the 13019 error message. I followed the steps, and it stopped giving me the error code but my music wont appear on my ipod. Any suggestions?

    Im really confused. My ipod was giving the 13019 error message. I followed the steps, and it stopped giving me the error code but my music wont appear on my ipod. Any suggestions? Please help

    Are you saying that the "Music" app is not present on your iPod Touch? Perhaps there is an issue with the restrictions on the iPod? If you're absolutely sure that the Music app is not present I would consider creating a backup of your iPod after syncing it with iTunes. I would then consider restoring it if this is the case.

  • HT1212 How do i restore my iphone when it has been disabled and can not be restored through itunes because of the error message that says "The iphone software update server could not be contacted.

    How do i restore my iphone when it has been disabled and cannot be restored through itunes because of the error message that says "The iphone software update server could not be contacted

    Have you jailbroken this device? This will make the iPhone not talk to the Software Update Server (that signs and accepts software updates) please refer to the following link? Error 3194, Error 17, or "This device isn't eligible for the requested build"
    The iPhone will talk to the software update servers, just need to change the host files, it's a simple process, sorry if you were confused about the wording in to top?

  • I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions? Thanks!

    I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?

    Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
    Run through this list of fixes
    Step by Step to fix your Mac

  • TS3297 halfway through downloading an album, i've got the error message 8003, and wanting me to check my connection (which is fine) any ideas?

    halfway through downloading an album from the Itunes store, i've got the error message 8003.  This talks about checking my connection (which is fine and always has been).  It downloaded fine onto my Iphone and Ipad. I trawled through the support pages and they just suggested you needed the latest version of Itunes on my system (11.1.5) which I've got.  Any ideas?

    You've tried the troubleshooting for that error on the TS3297 page that you posted from ?
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.

  • I need to be able to print or export some photos from iPhoto with the date the photos were taken.  Need this for a legal case.  Any suggestions?

    I need to be able to print or export some photos from iPhoto with the date the photos were taken.  Need this for a legal case.  Any suggestions?

    The date they were taken us in the EXIF data and is included in the export
    However it is trivial to modify it so I doubt that it would hold water in court
    LN

  • HT1923 after following the instructions to completing uninstall iTunes and related components, and I'd restarted and reinstalled iTunes, i received the error message that iTunes couldn't load because the deleted Apple Application Support wasn't present. W

    After following the instructions to completly uninstall iTunes and related components, I restarted computerand reinstalled iTunes, Then I received the error message that iTunes couldn't load because program file Apple Application Support (deleted as per instructions) wasn't present. What now?

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Help I upgraded to 6 OS and everything was working ok until yesterday and now it is giving me error message that I cannot connect to iTunes. I tried the reset thing and changing the date but still not working.

    Help I have an iPad 2 and recently had to upgrade to 6 OS. All was well until yesterday when I received N error message that I cannot connect to iTunes.  I tried the reset and changing the date and neither worked. Does anyone have another solution that works?  I see others are having the same problem.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • HT4059 I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't

    I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't cheap.

    Hi I had a similar issue to you, I could connect to the router but no internet. Here is my explanation of how I sorted it.....I hope this works for you.
    *To anyone that is reading this it appears that the problem lay in the airport setting: IPV6: set to 'Automatically'. I turned it off (after reading someones plight on MacFixIt) & everything is back to normal.*
    *The worrying thing is although my problem was extreme with other computers on the network being locked out nothing was changed, one minute it worked the next it didn't. Reading on other forums it appears to be a problem with laptops (but I could be mistaken). A lot of people on the Macfixit forum are complaining of network just dropping out even when they are next to the router.*
    *I hope this is the fix (although I dont know why it suddenly went to sh*t!) & I hope my hair pulling & trawling the forums can help someone else out.*
    Much Respect
    Lammo

Maybe you are looking for

  • IR and GR

    I am looking for a report where an IR is created for a GR and it must also show if no IR is created for a GR, if there is something that is SAP standard, it will be great, if not, the knowing the tables will also help, this way I can write the report

  • Can't load pages in Safari 5.1 (Windows 7)

    I received an auto notice to upgrade to Safari to Version 5.1 on my Dell E1505 Laptop running Windows 7.  After upgrading with the Apple Software Update tool, Safari has quit working.  It will not load any page and just hangs.  I used the windows con

  • PO Release Procedure

    Hi experts! We have created two (2) release codes for PO with no release prerequisites. Details are as follows: E1 - total net order value is less than or equal 1 million E2 - total net order value is greater than or equal to zero However, when E1 is

  • Main window ptr. from separate NIB file

    Hi All, This sounds like the simple kind of job a programmer would do everyday, but I haven't been able to figure it out yet. My NSObject app has the usual main window and MainMenu.nib file, and my user-defaults are kept in an NSWindowController subc

  • Set the command "close" in an action to answer "no" to save changes. (CS5)

    I am using a command now which I want to at the end of the command close the new file it opened. I tried recording the action and clicking 'no' while recording but this is not carried over into the action. How can I solve this?