After Upgrading to lion, can't burn a cd in iTunes and does not show up in finder

ive tried different cd brands and still nothing.. but the interesting thing is i can burn dvd's in itunes but still doesnt show in finder.
help!!!!

I'm having a similar issue, I choose to burn a playlist in iTunes, insert a disc and either get a message saying that I need to try another brand of cd, or the burn process starts then finishes immediately.
Ive tried several major name brands of cd-r.
Sometimes the disc is not even recognised.  The drives spins up slowly then stops 3 times, then spits out the disc.
This happened on a previous version of OSX but had been working great since snow leopard. (now on Lion)
Any help greatly appreciated.
M
MBP 2.16 Ghz Intel Core 2 Duo, 3GB 667 Mhz DDR2 SDRAM (superdrive)

Similar Messages

  • IPod Touch shows up on My Computer, but freezes iTunes, and does NOT show up on iTunes, how can i fix this?

    I have honestly spent countless hours trying to fix this, I FINALLY got it to show in My Computer, driver is updated, I have re-installed iTunes numerous times, recently did a FRESH Windows 7 Ultimate re-install, i can't restore the iPod (because it has been restored, and I can't even access it via iTunes) My iPod is NOT broken, it works on my laptop fine, it shows up on iTunes and My Computer, no problem. However, I need to use my iPod on my main computer for songs (iPod's practically new by the way) Like my question states, my iTunes freezes up, and it's very strange because it freezes, then a couple minutes later iTunes works fine, BUT my iPod doesn't show up on the side like it's supposed to. I've done everything, I hope I get some good support, thanks in advance!
    ~Thomas
    Edit: I have the latest update for the driver, and iTunes, iPod has 4.3.3
    Message was edited by: Havocks

    http://support.apple.com/kb/TS2972

  • After upgrading to Lion can't get Boot Camp to work! Just get "startup dusk cannot be portioned or restored to a single partition"?

    After upgrading to Lion can't get Boot Camp to work! Just get "The startup disk cannot be partitioned or restored to a single partition". Anytone?

    This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
    Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
    Then partition.
    Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
    You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

  • After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

    After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

    I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
    In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
    I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

  • Trying to upgrade from OS9 to 10.2.3, get as far as "select a Destination"  the installation stalls and does not show any destination disks

    I have a Power Mac G4, it has OS 9.  Imam trying to upgrade to OS 10.2.3 (Jaguar).  It is going smoothly until I get to the "Select Destination"  screen.  It stalls there and does not show any disks to choose from.
    Any ideas?
    Thanks. Abe Oliver

    Hello Abe,
    If it's a Digital Audio or earlier, you need to install a Firmware update first...
    As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
    http://support.apple.com/kb/HT1395?viewlocale=en_US
    Power Mac G4
    Firmware Update
    Download Document No.
    Power Mac G4 (Mirrored Drive Doors 2003)
    no update needed
    Power Mac G4 (FW 800)
    no update needed
    Power Mac G4 (Mirrored Drive Doors)
    no update needed
    Power Mac G4 (QuickSilver 2002)
    no update needed
    Power Mac G4 (QuickSilver)
    no update needed
    Power Mac G4 (Digital Audio)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (Gigabit Ethernet)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (AGP Graphics)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (PCI Graphics)
    no update needed
    Power Mac G4 Cube
    Power Mac G4 Cube Firmware Update 4.1.9
    75129

  • TS4062 I can't sync music on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. Suggestions?

    I can't sync music already on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. I've read through all the Help tutorials but none of them say what to do if the sync options don't pop up when you highlight the device.  I've already spent way too much time trying to figure this out and it's driving me crazy!  Thanks for any help you can offer.

    This is correct.  It will not show in finder.  It is not an external storage device.
    The music sync is one way - computer to ipod.  The only exception is itunes purchases.  Open itunes connect ipod, do not sync, click File>Transfer Purchases

  • Can anyone explain me, why my iTunes 11 does not have the MiniPlayer ?!!!!

    can anyone explain me, why my iTunes 11 does not have the MiniPlayer ?!!!!

    which OS are you running?
    iTunes11 has limited options if you are running Snow Leopard or earlier.

  • I have downloaded new ringtones for my iphone but my itunes dashboard does not show ringtones on it , so i can't put them on my phone.

    i have downloaded new ringtones for my iphone but my itunes dashboard does not show ringtones on it , so i can't put them on my phone.Am i doing something wrong.The ringtones were bought from i tunes.

    Tones is the new name for Ringtones. If the entry is missing in the left-hand column of iTunes then enable it from Edit > Preferences > General tab.
    If your existing tones are not syncing properly to your iOS device then uncheck the option to Sync Tones from the Tones tab when the device is connected, sync the device, check the option and sync again.
    tt2

  • TS1453 after itunes upgraded to latest 11.0.2.26 apple tv (1st gen)does not show up anywhere in itunes

    After Itunes upgraded to latest version 11.0.2.26 Apple TV (1st gen) does not show up anywhere in Itunes

    I have the same problem. It was working fine up until the last update for iTunes 11.0.2
    Here's the details:
    I have an Apple TV - first Gen and up until a couple of weeks ago, was regularly playing sync'd iTunes music and videos through it on a daily basis.
    I see other devicess showing up in the "Devices" list in the left panel of iTunes (such as iPad, iPhone, etc.)
    AppleTV used to be there consistently, then disappeared upon update to 11.0.2
    Apple TV also does not show up in the devices tab under the Preferences window.
    I have tried multiple suggestions on the support forum but none have worked.
    Apple TV is able to access the network, is on the same network as the iMac with iTunes library connected. Both are connected to network via ethernet cable (not wifi). Both are able to access the internet (apple tv plays movie prieviews and gets updates). Using the Terminal app, I am able to ping the apple TV's IP number from the iMac and get a successful return. 
    Both have latest software downloads.
    I have tried cold-booting the apple TV, resetting the router, and verified in the router device list that both imac and appleTV are listed as active, un-blocked connections.
    I don't intend to buy an Apple TV 2nd gen or later (since I bought this one and it's not working now due to software update, what guarantee that a later model won't generate the same problem later.
    One last wrinkle, I have a 2 year old and a 5 year old who are jonesing hard for their "dance party" fix.
    Have you ever wronged a two year old?
    It is NOT pretty.
    Help me Apple-wan-kenobi...I can't take the screaming!

  • When I turned on my device the inbox mail was empty, in time machine does not show options to find old back up, only inbox is not listed... how I can get my inbox emails back?

    I turned my macbook on and all the emails of inbox were gone. In time machine, only the inbox option does not shows option to get back old back ups... how I can get my inbox emails?

    I figured it out. I couldn't see the old backups because the sparsebundle had not been properly unmounted in a previous session, so it kept giving an "already in use" error. The problem was solved by restarting the Time Capsule through the Airport Utility, mounting the sparsebundle by double-clicking it, and then going through the "Browse other backup disks" option in the Time Machine menu bar icon.
    The following links were helpful in figuring this out:
    http://pondini.org/TM/C12.html
    http://pondini.org/TM/17.html

  • After upgrading to 4.0 my settings to clear history when closing does not work

    After upgrading, per your recommendation, to 4.0 my history, cache, cookies, etc. are not being cleared when I close the browser, despite the fact that I have correctly re-adjusted my option settings. When I re-open the browser, not only has it not cleared anything, but opens not on my home page either, but on the last web page I was on! Why do properly set options for privacy work anymore?!

    Digital Persona have abandoned their fingerprint reader and it will not work in Firefox 4. For more details see https://support.mozilla.com/en-US/questions/799388

  • After upgrading to iOS 8.2 on iPhone 6, Exchange Push email does not automatically update over wifi. Ideas?

    After upgrading my iPhone 6 to iOS 8.2 this weekend, my Microsoft Exchange email accounts (I have two) is no longer being pushed automatically when connected to Wifi.  This was working correctly before the update and continues to work correctly when on 4G, but not Wifi.
    Troubleshooting steps taken:
    * Tested on and off wifi - issue is only when on wifi not when on 4G
    * Turned mail sync off and then back on again - did not make a difference
    * Rebooted phone - did not make a difference
    Other ideas?

    I was able to track this down not to the email updates but the notifications.  The 8.2 update turned off email notifications both when unlocked and locked.  I was able to resolve by turning the notifications back on.  Seems odd that an update would change notification settings.

  • MY LIST OF 'DEVICES' ON 'FINDER' HAS 'TURNED OFF' ( does not display list and does not show as bright)  AND I CAN'T SEE MY LIST OF DEVICES (TO EJECT A DISK, OR ADD A FILE TO A DISK) ETC)??

    my list of 'devices' on 'FINDER' has 'turned off.  gone to not (bright ) does not display backup disks or I- pad etc.  I can't see my list to eject a disk or copy a file to I-Pad etc???
    Also how would I un-zip a file I have downloaded to "download" and then copy it to a disk??

    Hold down OPTION COMMAND and click S
    Regards,
    Captfred

  • After I close Firefox, then later try to open, message says it is still running. Check app mgr and does not show Firefox running. Try to open again and message says already running.

    It seems Firefox keeps running after I close it. When I try to open browser, message says it is running and tells me to close it. I check Task Manager and it does NOT indicate Firefox is running. Unable to open Firefox at all. Have to shut down entire computer and sometimes this works. Anyone have this problem before?

    When you go to task manager, go to the "processes" tab, right click on "firefox.exe," and select "end process tree." In the picture I've attached, I'm using windows 8, so the UI is a little different, but I hope it points you in the right direction.

  • After a failed attempt to update ipad through itunes, ipad is frozen black, does not respond and does not show in itunes when connected

    I connected my Ipad to my computer and I started itunes. Ipad needed updating so I proceded. Then there was an error and now ipad is not working at all. I have updated itunes, and restarted the computer, but still, now, itunes does not recognize ipad when connected. What can I do?

    Was it EVER jailbroke?

Maybe you are looking for

  • Verity & non-English categories

    Hi there I've attached some test code, which demonstrates what I'm doing. It looks a bit long-winded - it's 60-odd lines - and I'd usually not post that much, but I kind of have to here. It's pretty simple, so I hope you don't get frightened away by

  • I can't update my ipad software as the ipad force disconnects. same thing when i try to restore. Any suggestions?

    ipad won't update and keeps force disconnecting. won't Restore for same reason. Any suggestions?

  • AUTHORITY-CHECK before Selection-screen?

    Hi, i want to check the authority before the selection-screen. I do it in this way: AT SELECTION-SCREEN OUTPUT.   AUTHORITY-CHECK OBJECT 'Z_REPORT'            ID 'PROGRAM' FIELD SY-REPID            ID 'ACTVT'   FIELD '16'. "Ausführen   IF SY-SUBRC <>

  • Average of 2d array

    i have attached a image of 2d array. i have to make average of this aaray's saperate parameter in every 1minuts Prashant Soni LabVIEW Engineer Attachments: average.PNG ‏6 KB

  • Using "Where" operator sometimes generates a Null Value

    Hello, I am struggling with the following problem: Sometimes when I use the "Where" operator, I get a Null value that I can't get rid of.  For example:     [Fiscal Quarter] Where [Fiscal Quarter] = "2009 Q3"     Returns:    "2009 Q3"  and [Null]