After upgrading to Lion Time Capsule solid yellow

Hi
After upgrading to lion I am experiencing a lot of problems with time caspule
1. backup fail: it starts and than fails (error message and yellow warning triangle)
2. unable to connect to TC disk, neither from airport utility, nor from Finder
3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
After a lot of reboot,  reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
now backup seems to work and I can browse files in Time Machine
BUT
Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
Can somebody help me.
This all happened after Lion installation. Not a problem before
Franco

Hi William
The disk is the internal Time Capsule Disk. It's a 1Tb model.
My iMac is localized in Italian
So I write here the Italian message and a possible translation
The first error message I get opening Airport Utility is:
Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
(AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
If I press on "Continue" I enter a page that says
"Problema 1 di 1: Il disco Time Capsule non funziona"
(Problem 1 of 1: The Time Capsule Disk doesn't work)
"Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
(There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
While if I go to the manual settings and I select the disk,
on the disk data info I have
Stato S.M.A.R.T.: Non funziona
(S.M.A.R.T status: Not working)
As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?)  and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
(I can agree on that now, but I was surprised to hear that from them )
Thank you very much for any help.
I hope this info helps
Franco Andrea

Similar Messages

  • After upgrading to lion Time Capsule is solid yellow

    Hi
    After upgrading to lion I am experiencing a lot of problems with time caspule
    1. backup fail: it starts and than fails (error message and yellow warning triangle)
    2. unable to connect to TC disk, neither from airport utility, nor from Finder
    3. Airport Utility hangs while trying to manually modify configuration (rainbow weel).
    After a lot of reboot,  reset, disk rename, time capsule reconfiguration etc etc AND TC DISK REINITIALIZATION (ALLA BACKUP LOST!)
    now backup seems to work and I can browse files in Time Machine
    BUT
    Time Capsule is a steady YELLOW and Airport utility says there is an error on disk (The disk is not working)
    Can somebody help me.
    This all happened after Lion installation. Not a problem before
    Franco

    Hi William
    The disk is the internal Time Capsule Disk. It's a 1Tb model.
    My iMac is localized in Italian
    So I write here the Italian message and a possible translation
    The first error message I get opening Airport Utility is:
    Utility Airport ha trovato una Time Capsule 802.11n (2.a generazione) che segnala problemi
    (AirPort Utility has found a Time Capsule 802.11n (2nd generation), which indicates problems)
    If I press on "Continue" I enter a page that says
    "Problema 1 di 1: Il disco Time Capsule non funziona"
    (Problem 1 of 1: The Time Capsule Disk doesn't work)
    "Si è verificato un problema con il Disco Time Capsule. Collega un disco rigido USB al tuo disco Time Capsule e utilizza il pannello Dischi di Utility Airport per archiviare i dati ed eseguire il backup."
    (There was a problem with the Time Capsule disk. Connect a USB hard drive to your Time Capsule disk and use Disk Utility Airport panel to store data and run the backup.)
    While if I go to the manual settings and I select the disk,
    on the disk data info I have
    Stato S.M.A.R.T.: Non funziona
    (S.M.A.R.T status: Not working)
    As I said before, apart from that problem, everything else (time machine, backups and file recovery) looks working good (until proven otherwise eh eh)
    I don't know if to worry about the disk but I find suspicious that everything just started after Lion installation.
    I called the call center and they just said to return the TC for disk repair (have to pay, warranty expired).
    I told them about Lion installation fact and they said it looks like a coincidence but actually it is likely that after a disk initialization or a big amount of data writing the TC disk may break (WHAT ?!?)  and the Apple guy even suggested me to buy an external disk that is less expensive and give less problem than a TC !!!!
    (I can agree on that now, but I was surprised to hear that from them )
    Thank you very much for any help.
    I hope this info helps
    Franco Andrea

  • Cannot see NAS units after upgrading to Airport Time Capsule.

    I just upgraded my router from a D-link DIR 655 to a new Airport Time Capsule and I cannot no longer see access my Drobo NAS units. 
    http://www.drobo.com/products/professionals/drobo-fs/
    I am using Mountain Lion OS 10.8.5.  I know when using OS 10.8.5 I have to ensure that DDServiced and DDServiced64 are Allowed.  I have done this in the routers settings.
    http://store.apple.com/ca/product/ME177AM/A/airport-time-capsule-2tb
    I cannot see the NAS units on my PC (Windows) either.
    My internet works (wirelessly and physicall) so the router is connecting to my modem correctly.  However I cannot access these NAS units nor their shared holders on any comptures or wireless devices in my house.
    Is the Airport Time Capsule the issue here?  Is it compatible with the Drobo FS NAS?
    Thanks

    I am running the latest version of Drobo Dashbloard on both my Mac and PC 2.5.2.
    I only see DDServiced64 under Apple Symbol to top left of Menu\System Preference\Security and Privacy\Firewall\Firewall Options.
    Given that I cannot see the Drobos on either my Mac or PC I am wondering if:
    1) is the new Apple Airport Time Capsule causing problems; or
    2) is the Norton Antivirus that is on my PC conflicting with a setting on the Apple Airport Time Capsule
    None of this was a problem when I used the previous router (D-link DIR 655).  I could access both Drobos on both my Mac (wirelessly) and PC (physically connected to the the same router as Drobos via network cables).
    When I was using my D-link DIR 655 I was using DCHP and using static IP Addresses for all my devinces in my house.  Now when I changed my router over to the Apple Airport Time Capsule I did not opt to use DCHP.  Could this be an issue.  Note I am not having any problem with any of the other wireless devices in my house.  I can see all my Sonos wireless music equipment.  However I cannot see the two Drobos that are physically connected to my Apple Airport Time Capsule.
    Thanks

  • Time machine stopped working after upgrading to lion

    After upgrading to lion my time machine has not been able to back up. It takes a long time preparing and trying to back up and then stops with an error (without an error message being shown to the user). The status is delayed and it claims that the backup disk cannot be found (Im using a time capsule).
    The system log contains the following entries (filtering on "time"):
    Aug 18 21:58:48: --- last message repeated 2 times ---
    Aug 18 22:00:06 Macintosh-2 mtmd[2132]: Set snapshot time:1313697608 (current time:1313697606)
    Aug 18 22:01:27 Macintosh-2 com.apple.backupd[3318]: Network destination already mounted at: /Volumes/Soren Helsted's Time Capsul
    Aug 18 22:02:10 Macintosh-2 fseventsd[17]: event logs in /Volumes/Time Machine Backups/.fseventsd out of sync with volume.  destroying old logs. (280 2 3619)
    Aug 18 22:02:11 Macintosh-2 fseventsd[17]: log dir: /Volumes/Time Machine Backups/.fseventsd getting new uuid: 06F2B428-D8B5-46F7-9505-DCF33818C3FC
    Aug 18 22:02:11 Macintosh-2 com.apple.backupd[3318]: Disk image /Volumes/Soren Helsted's Time Capsul/Soren Helsted’s Computer.sparsebundle mounted at: /Volumes/Time Machine Backups
    Aug 18 22:02:12 Macintosh-2 com.apple.backupd[3318]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Aug 18 22:05:39: --- last message repeated 81 times ---
    Aug 18 22:05:39: --- last message repeated 14 times ---
    Aug 18 22:05:39 Macintosh-2 mds[68]: (/Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/A0B6A325-88A2-4408-AF3F-319C76E5E58C)(E rror) IndexGeneral in fd_pread:pread(120 /Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/A0B6A325-88A2-4408-AF3F-319C76E5E58C/1. indexPostings, o:0, s:262144) err:5
    Aug 18 22:05:41: --- last message repeated 1427 times ---
    Aug 18 22:05:41 Macintosh-2 mds[68]: (/Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/A0B6A325-88A2-4408-AF3F-319C76E5E58C)(E rror) IndexCI in ci_ftruncate:ftruncate(86 /Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/A0B6A325-88A2-4408-AF3F-319C76E5E58C/tm p.merge.0.indexIds, 0) error:5
    Aug 18 22:05:42: --- last message repeated 737 times ---
    Aug 18 22:05:42: --- last message repeated 43 times ---
    Aug 18 22:05:42 Macintosh-2 fseventsd[17]: disk logger: failed to open output file /Volumes/Time Machine Backups/.fseventsd/00000000032488f5 (Input/output error). mount point /Volumes/Time Machine Backups/.fseventsd
    Aug 18 22:05:42: --- last message repeated 1 time ---
    Aug 18 22:05:42: --- last message repeated 11 times ---
    Aug 18 22:05:42 Macintosh-2 mds[68]: (/Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/A0B6A325-88A2-4408-AF3F-319C76E5E58C)(E rror) IndexCI in open_index_file:open file error: 5, tmp.merge.1.indexHead
    Aug 18 22:05:42: --- last message repeated 32 times ---
    Aug 18 22:05:42: --- last message repeated 1 time ---
    Aug 18 22:05:42: --- last message repeated 1 time ---
    Aug 18 22:06:07: --- last message repeated 61 times ---
    A

    I finally figured out what was the problem. The disk utility tool found an error in the backup disk and fixed it. I guess some error occurred while the upgrade to Lion was on the way.

  • Significant slowdown of Time Machine after upgrade to Lion; indexing problem

    After upgrading to Lion over the weekend I notice a significant slowdown of Time Machine processing.  I assumed the first backup or two would take some time but it's been a couple of days.  The process always hangs up at the "Indexing backup" stage.  It takes a couple of hours to finish.
    I found several threads relating to slowed down backups on Lion, most seem to hang at the "Preparing" stage (not the same symptom) but I did find some good diagnostic pointers.  I installed the widget to see what kind of messages were being produced and found a few dozen "Waiting for index to be ready (100)" messages at the end of the stream.  Further research - this is not a good thing :-)  It seems a couple of such messages can be ok, but this many usually indicates a problem.  I'm going to discount the possibility of a hardware failure because everything was perfectly fine up to the point I made the upgrade.  Plus the prepare and copy seem to proceed at the expected speed (I watched the most recent cycle just to be sure).
    Here is the full message log (it's still running at the moment):
    Starting standard backup
    Attempting to mount network destination URL: afp://Paul%[email protected]/Paul%20DiMarzio's%20Tim e%20Capsul
    Mounted network destination at mountpoint: /Volumes/Paul DiMarzio's Time Capsul using URL: afp://Paul%[email protected]/Paul%20DiMarzio's%20Tim e%20Capsul
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/Paul DiMarzio's Time Capsul/Paul DiMarzio’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    12.15 GB required (including padding), 490.69 GB available
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    Waiting for index to be ready (100)
    I further found the advice and instructions on how to run the disk utility on the sparsebundle.  I did a verify and repair, and the results came back that the drive appears to be ok (it did not say that it explicitly repaired anything).
    But the problem remains.
    I use a 1TB Time Capsule with plenty of free capacity (only half full).  The TC and my MacBook are both hardwired into the home network, networking speed has never been an issue.
    I'd sure hate to delete the backup file and start from scratch, there's over a year's worth of data there and I have, occassionally, wanted to go in there and pick up a downlevel or subsequently deleted file.
    Any advice on other diagnostics or repair options to take?  Thanks!
    Paul

    After posting I decided to keep trying to slog my way through the troubleshooting guide.  Some of the steps are beyond my understanding but I did follow the advice in #D2 to delete the .Spotlight-V100 file from the sparsebundle.  That action does seem to have done the trick, the backups are now completing in normal time.  I ran a couple just to be sure.  I've verified the backups with BackupLoupe and entered the Time Machine, all appears to be in order and as expected.  The only odd side effect is that the backup volume is no longer ejected after completion but that might just be an artifact of all my mounting/de-mounting and playing with Finder.  Anyway a very small price to pay for what looks to be a working system again.
    Hopefully the good behavior will last through a few days and a few reboots :-)
    ps - if you're reading this and don't know about the troublshooting guide it's here: http://web.me.com/pondini/Time_Machine/Troubleshooting.html (thanks pondini)

  • Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

    Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

    Arghhhhhhhhhhhhhhhhhhh!!!!!!
    After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
    Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
    Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
    The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
    I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive.  But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
    How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
    Words, almost, fail me.

  • After upgrading to lion starting up is taking much more time ??

    After upgrading to lion starting up is taking much more time is there any solution to this ?
    i do all things about cleaning disk permission or editing .

    Have you check what is being started at the same time?
    Lion will start more applications then were being started in the past.
    Allan

  • Time Machine says Backup Delayed After Upgrading to Lion

    Time Machine says Backup Delayed After Upgrading to Lion on both my Macs. It backs up fine when ever I connect to the USB drive but now seems to want to back up hourly when before weekly was OK. When it does not compleye an hourly backup it reports a delayed backup - failure on both machines. How do it revert back to it reminding me to do weekly backups?

    I'm having the same issue with Time Machine on OS X Lion!
    According to this webpage:     http://web.me.com/pondini/AppleTips/LionChanges.html
    Backups (i.e., Time Machine, SD, CCC, etc.) will only save the current "Version" of files.
    The above statement sounds like the issue @iJRB and myself are having after upgrading to Lion where Time Machine shows the following error message below within "System Preferences > Time Machine"
    @iJRB: Is this the error message you are seeing?

  • Time Machine usage after upgrade to Lion

    Hi,
    On one of my Macs I've still Snow Leopard running and I'm using Time Machine for backups.
    Question: After upgrading to Lion on that Mac, will I be able to continue "incremental" Time Machine backups OR will I have to make a complete Time Machine backup of the entire hard drive?
    Many thanks.

    Because of the new OS, Time Machine will want to backup the whole new OS and all other files affected by it.  It's a lengthy backup.  Then it will go  back to incremental backups.
    Hope this helps

  • Cannot eject USB HDD that is being used for Time Machine after upgrading to Lion

    After upgrading to Lion from SL, I have had only one issue.  Amazing!  Great job Apple with making the process smooth, but my issue is this.  Ever since the upgrade, I cannot eject the external USB HDD that I use for Time Machine.  I get the following error:
    The disk "Time Machine" wasn't ejected because one or more programs may be using it.  To eject the disk immediately, click the Force Eject button.  There is the little spinning fan and the message "Trying to eject" and then the fan disappears and where it said, "To eject the disk immediately..." it now says "You can try to eject the disk again or click Force Eject to eject it immediately."  I can click Force Eject and it will work, but seems like there is an issue that needs to be addressed.  Any thoughts anyone?

    Ok, I think there's a slightly better way, but try this:
    Open the Terminal app (in your Applications/Utilities folder). Be very careful with this app.  It's a direct link into UNIX, the underpinnings of OSX, but without the protections of OSX.
    In Terminal, the prompt looks like this: <Computer Name>:~ <your name>$
    (where <your name> is your short user name).  It's followed by a non-blinking block cursor.
    Copy the following after the prompt:    
              lsof |grep
    and leave a space.  Then drag the Backups.backupdb folder on the TM drive from a Finder window into the Terminal window (Terminal will convert that into a "path").
    Press Return.
    You should get a list of geeky stuff; but the first thing on the next line should be the process that's using the drive (Finder in the sample), followed by another prompt:

  • Excel 2011 issues after upgrading to Lion

    After upgrading to Lion, I cannot open .xls files anymore in Excel for Mac 2011. The files on my own computer work, but files that I receive via email cannot be openend. Does somebody know how to solve this? Thanks. Raymond.

    Did that work for you?  I was looking at that too, but was discouraged by having to use a sparsebundle given Snow Leopard had such great NAS support. 
    FYI to everyone else, I upgraded my ReadyNAS firmware to 4.1.8.  NetGear indicated the following updates with the nre firmware, but it didn't fix this problem:
         New features and enhancements
         1. Added support for Mac OS X 10.7 “Lion”.
         2. Added warning when NFS access to home shares is enabled.
         3. Added a redirect for http://<host>/ip to https.
         4. Added enhancements to advanced AFP permission settings.
         5. Provide download links for exported users and groups instead of asking for email.
         6. Updated ReadyNAS Remote to the latest revision.
         Bug fixes
         1. Fixed javascript error in FrontView.
         2. Delay auto power-off if backup jobs are still queued.
         Limitations
         1. IE 6 no longer supported.
         2. Drives greater than 2TB are not supported.
    I found this link which I thought had some useful information: http://carryflag.blogspot.com/2010/06/imovie-event-library-on-network-drive.html
    Some people reported success with the terminal command:
         defaults write -app iMovie allowNV -bool true
    But apparantly, after the Lion update, fewer people reported success with it.  Still looking though... If anyone else has more symptoms to add, please let me know.  I might try to use a sniffer program and see if I can pull a packet capture.  That might reveal some info.... 
    On another note, has anyone had any problems connecting to their Time Capsule in the same fashion?  I had an idea of connecting a USB Raid Array to it and connecting through the TC, but wanted to know if anyone had any thoughts or experience with that....  Thanks.

  • After upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?

    after upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?
    before the upgrade, i could open time machine without the need for having the back up disk plugged in.

    Ok. I got it to work, sort of....
    As I mentioned before I tried the "disk password" and the "Time capsule Password" options to see if I can start the back up again or start a new backup. Neither worked. So I tried the firmware down grade, but like you said that did not work. I then decided to try the "Account password" option and I have never used this option before becasue it states that if there is data on the drive it would not be acessable after creating an account. Since I wiped out the disk that was nno problem. When I created the new account and choose the drive it asked for the user name and password. I entered the info for the new account I just created(FYI this has nothing to do with your login username and password), bingo! It worked!
    Now I have two partitions on the TC disk. The old one and now the new account. I am guessing this is to be used if I have multiple computers, which I don't.
    I any case, I am going to wipe out everything again and try again to do a backup the way I had it before.

  • I can't hear sound after upgrading to lion

    I have this little annoying problem with my iMac after upgrading to Lion OSX. After waking up my iMac I can't hear any sound from internal speakers, ie: only video on Youtube, but no sound, but whilst pressing volume up/down button I can hear beep. When it happens So I have to restart system everytime it happens. Anyone any ideas or maybe someone out there has the same problem?

    I'he double checked everything, only 1 output device (internal speakers). As I said before, it is weird because I can play iTunes and can hear "beep", but neither youtube sound, nor game sound or internet radio seems to be working, no sound whatsoever. But this time system didn't go to sleep, it has just happened suddenly.... Restart again then!

  • After upgrading to Lion, wifi seems to be much slower, is this caused by lion?

    Hello All,
    After upgrading to Lion, my MMA wifi seems to work much slower than before, and also the start up seems to be slower too. Is that caused by upgrading to Lion? Please help

    Give it a few days and a dozen or so restarts.
    The software may be updating Spotlight indexing and a few other "housekeeping" tasks.
    My upgrade on a 2010 Air resulted in a slowdown at first, but then began to return to normal. At first, the boot time doubled, but within a couple of days, it was back to a 12 second boot.

  • After upgrading to Lion, FaceTime does not give me a login screen.  Help!

    After upgrading to Lion, I tried to use FaceTime for the first time.  The login screen never launches.  What can I do to get a login screen?

    update: It seems like the XCode update did interfere with itunes. I reran the XCode install this time with itunes not running. This seems to update all necessary drivers and Library items correctly.
    After this IPad and IPod touch were working fine again.

Maybe you are looking for

  • I changed my Apple ID but my iCloud ID is causing trouble

    I changed my Apple ID and everything was working. Now I went back to my phone one day and it asked me for my iCloud password for a backup, but the email is still the old one. If I check iCloud in settings there's the old email. Entering the password

  • Rounding in Incoming Payment

    I have a bit of a problem I hope someone cna help me with in Administration > General Settings > Display I set both amounts and Prices to 5 In Documents settings I set the rounding to be Currency not Document. In AP Invoice Entry,  I have the ability

  • IPhone 4s battery stuck at 100 percent. How do I get it back to normal?

    iPhone 4s battery stuck at 100 percent. How do I get it back to normal? Ever since the update, I am having issues with the battery. Phone shuts down while it still shows 100 percent battery life. Normally not a big deal because I don't use it all the

  • Exchange Admin Cannot View Full Room Calendar Permissions

    We are a brand new Exchange 2010 SP3 (14.3 build 123.4) shop with Outlook 2010 (14.0.6112.5000), so no older versions of Exchange or Outlook exist in our environment.  I have full Exchange administration access to the system and Full Access to all ro

  • Updating project document from file.

    Hi community, I need to create a functionality using C# to update opened Project Professional 2013 Document. I have an open document with some project. At some moment the project file was changed by third party program. Those changes need to be displ