After upgrading to Mac OS 10.9 My HP Deskjet F4580 all in one printer no longer scans. How can we fix it?

Hi All,
I recently upgraded to Mac OS 10.9 Mavericks, but now my HP Deskjet F4580 All in one printer will not scan any documents either as PDF or as JPG, how can we fix this?

I have simialr problems, after i scanned the ducuments or pictures, i can save it for only once, but the file is just black pictures with many lines through them. When i try to save it again, then it says ''An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.', which then doesn't allow me to do anything of saving the file or even just to print it out.

Similar Messages

  • Deskjet 2540 all in one printer - does the scanning work with Mac OS Yosemite 10.10.1 ?

    I was trying to scan a document using this new printer and my Mac OS Yosemite 10.10.1 and I cannot even find the page that allows me to scan since now it is all through the computer.  Is this printer compatible with this operating system? and if so, what can I do to see the page where the file actually shows up to scan?
    thanks,
    Natali

    Hello NatDeskjet2540,
    Welcome to the HP Support Forums!
    Regarding your inquiry into scanning with 10.10 and the Deskjet 2540, I would like to help. The software you need to install is here: HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. Once installed, you can access the the walk through here: Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers.
    Hope this help, let me know.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Mac os 10.7.5 HP Deskjet 2540 All-in-One Printer

    Hello, I've just bought a HP printer, but i can't connect the wirelles with my mac. Is a HP deskjet 2540 All-in-One Printer, and the mac os x opperating system is 10.7.5 Lion. Is there a way to connect them or not?
    thanks in advance.

    Dear cblins,
    Here you have the full software to install your multifunction:
    http://ftp.hp.com/pub/softlib/software12/COL52008/mp-125743-5/HP-Deskjet-2540-series_v12.34.0.dmg
    And here you have a document where tells you how to install it by wireless:
    http://support.hp.com/us-en/product/HP-Deskjet-2540-All-in-One-Printer-series/5295960/model/5295961/...
    I hope you find it helpful.
    Greetings.
    * I am not an employee of HP, my work is voluntary.
    If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
    I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
    and click on the icon if you want acknowledge the assistance.

  • Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

    Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
    Looking forward to hearing from somebody with a littlemore expertise than me, Chris

    you can remove preferences files by navigating to the Preferences folder for your user as follows:
    0) Quit ALL iWork apps (Keynote, Pages and Numbers)
    1) from the Finder select the menu item "Go > Go To Folder…".  This will bring up a dialog:
    2) enter the path "~/Library/Preferences" (no double quotes)
    3) find the files:
    com.apple.iWork.Keynote.plist
    com.apple.iWork.Numbers.plist
    com.apple.iWork.Pages.plist
    and move these to the trash.  I would NOT empty until later.
    4) restart Numbers

  • HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

    I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
    Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
    I have tried all the solutions provided on the HP website but none of them worked.
    I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
    If some genius can help me I will pray for him/her that all his/her wishes come true.
    Thanks you in advance.
    Imroz Baig

    I just got my HP Deskjet F2120 working in Windows 7.  Here's how:
    Insert the setup disk in your CD/DVD drive.  Choose to view the files in Explorer.  Scroll down to the file "Setup," which is identified as an application.
    Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
    Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
    ALSO check "Run this program as administrator" at the bottom of the window.
    Press "Apply," then "OK."
    Now you can double-click the "Setup" file and run the software installer.
    It will 100% work inshallah...

  • My mac is slow, the movies run slowly, the kernel_task consumes 463,3 MB of memory, how can I fix this?

    My mac is slow, the movies run slowly, the kernel_task consumes 463,3 MB of memory, how can I fix this?
    The problem started a few weeks ago with a small decrease in speed, and the videos now crash while the sound remains normal. When I open the Finder or any file it seems that I'm opening the windows with the hourglass spinning. I've already  cleaned temporary, removed everything that was saved on the table, I made ​​up for the mountain lion. I have a Mac 27-inch, 3.06 GHz processor Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, ATI Radeon HD 4670 256 MB, Software OS X 10.8. With space on the HD.
    Cópia do monitor de atividades
    0           kernel_task          root          1,1          76          394,5 MB          Intel (64 bits) 
    248           Conteúdo da Internet do Safari          silvanalahutte          0,0          9          128,4 MB          Intel (64 bits)
    282           Mail          silvanalahutte          4,4          12          99,2 MB          Intel (64 bits)
    247           Safari          silvanalahutte          0,0          13          68,1 MB          Intel (64 bits)
    173           Dock          silvanalahutte          0,0          3          63,3 MB          Intel (64 bits)
    35           mds          root          0,2          6          61,2 MB          Intel (64 bits)
    89           WindowServer          _windowserver          1,9          5          53,2 MB          Intel (64 bits)
    252           Flash Player (plug-in de Internet do Safari)          silvanalahutte          0,3          6          27,0 MB          Intel (64 bits)
    275           Monitor de Atividade          silvanalahutte          3,0          4          21,1 MB          Intel (64 bits)
    39           loginwindow          silvanalahutte          0,0          2          20,9 MB          Intel (64 bits)
    60           coreservicesd          root          0,0          4          20,3 MB          Intel (64 bits)
    195           Central de Notificações          silvanalahutte          0,0          3          19,6 MB          Intel (64 bits)
    159           universalaccessd          silvanalahutte          0,0          5          19,4 MB          Intel (64 bits)
    170           SystemUIServer          silvanalahutte          0,0          4          19,3 MB          Intel (64 bits)
    269           mdworker          silvanalahutte          0,2          4          17,9 MB          Intel (64 bits)
    174           Finder          silvanalahutte          0,0          4          16,0 MB          Intel (64 bits)
    222           com.apple.dock.extra          silvanalahutte          0,0          2          14,4 MB          Intel (64 bits)
    203           CalendarAgent          silvanalahutte          0,0          4          13,4 MB          Intel (64 bits)
    251           com.apple.iCloudHelper          silvanalahutte          0,0          7          12,2 MB          Intel (64 bits)
    32           opendirectoryd          root          0,0          8          10,0 MB          Intel (64 bits)
    211           Extensão Captura de Imagem          silvanalahutte          0,0          3          9,4 MB          Intel (64 bits)
    296           com.apple.NotesMigratorService          silvanalahutte          0,0          2          9,4 MB          Intel (64 bits)
    188           HPScanner          silvanalahutte          0,0          3          9,4 MB          Intel (64 bits)
    190           UserEventAgent          silvanalahutte          0,0          3          8,3 MB          Intel (64 bits)
    15           securityd          root          0,0          4          8,2 MB          Intel (64 bits)
    258           AppleSpell.service          silvanalahutte          0,0          2          8,0 MB          Intel (64 bits)
    56           apsd          root          0,0          4          7,2 MB          Intel (64 bits)
    103           aosnotifyd          root          0,0          4          7,2 MB          Intel (64 bits)
    40           locationd          _locationd          0,0          7          7,2 MB          Intel (64 bits)
    137           coreaudiod          _coreaudiod          0,0          4          7,1 MB          Intel (64 bits)
    274           Quick Look Helper          silvanalahutte          0,0          5          7,0 MB          Intel (64 bits)
    126           named          root          0,0          1          7,0 MB          Intel (64 bits)
    172           talagent          silvanalahutte          0,0          2          6,9 MB          Intel (64 bits)
    215           CIJScannerRegister          silvanalahutte          0,0          6          6,1 MB          Intel (64 bits)
    216           xpcd          silvanalahutte          0,0          2          5,8 MB          Intel (64 bits)
    305           mdworker          _spotlight          0,0          3          5,3 MB          Intel (64 bits)
    212           accountsd          silvanalahutte          0,0          2          5,1 MB          Intel (64 bits)
    105           ocspd          root          0,0          4          4,9 MB          Intel (64 bits)
    199           imagent          silvanalahutte          0,0          3          4,6 MB          Intel (64 bits)
    180           xpcd          _coreaudiod          0,0          2          4,4 MB          Intel (64 bits)
    165           fontd          silvanalahutte          0,0          2          4,2 MB          Intel (64 bits)
    183           com.apple.audio.SandboxHelper          _coreaudiod          0,0          2          4,2 MB          Intel (64 bits)
    295           com.apple.hiservices-xpcservice          silvanalahutte          0,0          2          4,1 MB          Intel (64 bits)
    13           taskgated          root          0,0          4          4,0 MB          Intel (64 bits)
    18           configd          root          0,0          7          4,0 MB          Intel (64 bits)
    12           kextd          root          0,0          2          3,9 MB          Intel (64 bits)
    11           UserEventAgent          root          0,0          3          3,8 MB          Intel (64 bits)
    104           socketfilterfw          root          0,0          3          3,3 MB          Intel (64 bits)
    189           usernoted          silvanalahutte          0,0          2          3,3 MB          Intel (64 bits)
    300           CVMCompiler          silvanalahutte          0,0          2          3,2 MB          Intel (64 bits)
    106           rpcsvchost          root          0,0          16          2,8 MB          Intel (64 bits)
    36           mDNSResponder          _mdnsresponder          0,0          3          2,8 MB          Intel (64 bits)
    45           fseventsd          root          0,0          63          2,7 MB          Intel (64 bits)
    123           wifid          root          0,0          2          2,7 MB          Intel (64 bits)
    285           lsboxd          silvanalahutte          0,0          2          2,6 MB          Intel (64 bits)
    50           appleeventsd          _eppc          0,0          2          2,6 MB          Intel (64 bits)
    246           pbs          silvanalahutte          0,0          2          2,6 MB          Intel (64 bits)
    29           revisiond          root          0,0          4          2,6 MB          Intel (64 bits)
    23           usbmuxd          _usbmuxd          0,0          3          2,5 MB          Intel (64 bits)
    187           NetworkBrowserAgent          silvanalahutte          0,0          3          2,5 MB          Intel (64 bits)
    42           InternetSharing          root          0,0          8          2,3 MB          Intel (64 bits)
    73           netbiosd          _netbios          0,0          3          2,2 MB          Intel (64 bits)
    200           helpd          silvanalahutte          0,0          2          2,1 MB          Intel (64 bits)
    186           filecoordinationd          root          0,0          2          2,0 MB          Intel (64 bits)
    202           AppleIDAuthAgent          silvanalahutte          0,0          3          2,0 MB          Intel (64 bits)
    57           distnoted          root          0,0          2          2,0 MB          Intel (64 bits)
    241           printtool          silvanalahutte          0,0          2          1,9 MB          Intel (64 bits)
    220           AirPort Base Station Agent          silvanalahutte          0,0          4          1,8 MB          Intel (64 bits)
    55           autofsd          root          0,0          2          1,8 MB          Intel (64 bits)
    138           logind          root          0,0          2          1,7 MB          Intel (64 bits)
    49           dpd          root          0,0          2          1,7 MB          Intel (64 bits)
    1           launchd          root          0,0          3          1,6 MB          Intel (64 bits)
    44           hidd          root          0,3          3          1,6 MB          Intel (64 bits)
    27           SleepServicesD          root          0,0          2          1,6 MB          Intel (64 bits)
    127           bootpd          root          0,0          1          1,6 MB          Intel (64 bits)
    160           cfprefsd          silvanalahutte          0,0          4          1,6 MB          Intel (64 bits)
    93           CVMServer          root          0,0          2          1,6 MB          Intel (64 bits)
    30           ptmd          root          0,0          2          1,5 MB          Intel (64 bits)
    16           diskarbitrationd          root          0,0          2          1,5 MB          Intel (64 bits)
    63           cfprefsd          root          0,0          4          1,4 MB          Intel (64 bits)
    14           notifyd          root          0,0          3          1,4 MB          Intel (64 bits)
    267           distnoted          _spotlight          0,0          2          1,4 MB          Intel (64 bits)
    155           launchd          silvanalahutte          0,0          2          1,4 MB          Intel (64 bits)
    99           ntpd          root          0,0          2          1,3 MB          Intel (64 bits)
    276           activitymonitord          root          0,8          1          1,3 MB          Intel (64 bits)
    19           syslogd          root          0,0          5          1,3 MB          Intel (64 bits)
    26           stackshot          root          0,0          3          1,1 MB          Intel (64 bits)
    90           networkd          _networkd          0,0          2          1,0 MB          Intel (64 bits)
    41           KernelEventAgent          root          0,0          3          996 KB          Intel (64 bits)
    268           cfprefsd          _spotlight          0,0          2          988 KB          Intel (64 bits)
    182           cfprefsd          _windowserver          0,0          2          960 KB          Intel (64 bits)
    128           natpmpd          root          0,0          1          936 KB          Intel (64 bits)
    301           WebKitPluginAgent          silvanalahutte          0,0          2          932 KB          Intel (64 bits)
    166           pboard          silvanalahutte          0,0          1          932 KB          Intel (64 bits)
    179           launchd          _windowserver          0,0          2          808 KB          Intel (64 bits)
    264           launchd          _spotlight          0,0          2          804 KB          Intel (64 bits)

    With space on the HD.
    Depends on how much free space.
    Right or control click the MacintoshHD icon on your Desktop.
    Click Get Info. In the Get Info window you will see Capacity and Available.
    Make sure there's a minimum of 15% free disk space.

  • TS1389 Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Hi Deb,
    Deauthorizing all is definitely the way to go.  You will just need to authorize your computer again after, as well as your husband's.
    Here's some additional information on deauthorizing all:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/ht1420
    I hope this helps!
    - Ari

  • Installing software for MAC 0S X 106.8 and ENVY 7645 all in one printer

    Is there a way to download software so that my MAC OS X 10.6.8 and work with my new HP ENVY 7645 all-in-one printer?
    If so, please tell me how to do that?  Thanks!

    Hi,
    I afraid not.
    The printer is only supported on 10.7 or newer OS versions, as listed within the System Requirements below:
    http://support.hp.com/us-en/document/c04353671/
    If your Mac support Yosemite you may upgrade your operating system to 10.10 for free:
    https://www.apple.com/osx/how-to-upgrade/?
    The other option os to replace the printer with another model which is compatible with your operating system.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Apple mail 5.2 Mac OSx 10.7.4 takes 120 secs to send even 1 word email? How can I fix this?

    Apple mail 5.2 Mac OSx 10.7.4 takes more than 3 minutes to send even 1 word email? How can I fix this?

    You may get an answer here at the Mountain Lion discussion, but I'd suggest Lion folks are more likely hanging out at the Lion discussion page:
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion
    A little more info would be helpful- when did this start, ever able to send in a timely manner, etc.
    Good luck.

  • After upgrading to Firefox 9, it appears that I have lost the bookmark section of my toolbar. How can I retreive them?

    I chose, unfortunately, to update my Firefox to a newer edition (9), and after restarting, I noticed that my regular upper toolbar on my homepage (TimeWarner RoadRunner) appeared totally different and no longer contained my "bookmarks" tab, where I had stored dozens and dozens of important bookmarks. How can I get that back, or if necessary go make to my older version of Firefox, and restore my previus settings and features?

    If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    *Open the Customize window via "View > Toolbars > Customize"
    *Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    *If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
    *http://kb.mozillazine.org/Toolbar_customization
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • I upgraded my iPad (first gen) to iOS 5.1 and now it will randomly turn off.  How can I fix this?

    Thread title pretty much says it all.
    Shortly after upgrading to iOS 5.1, my 1st gen iPad started randomly turning off when I wasn't using it.
    -This has been occuring for over a month now.
    -It has not yet turned off while I'm actually using it, only after I've left it along for awhile
    -If I leave it plugged in, it doesn't turn off
    -I have trouble turning it back on after this occurs.  (I have to press/hold the button several times before it will finally turn on)
    -I've noticed that a lot of the time when I turn it back on, it will initially (for a second or two) show a battery % that is lower than what it actually is (ex. it will show 72% when I turn it on but then jump up to 90% after a second or two)
    Seems to me like it's something related to iOS 5.1 that my iPad doesn't like, likely a batter issue.  Although having trouble turning it back on would lead me to believe it might be something more.  It is an iPad 1 so maybe it's just getting up there in mileage.
    Any suggestions on what to do?  I neglected to take any backups.  Unless someone gives me other input, I'm planning on taking a backup of my current iPad and then restoring to factory settings just to see if that will solve this issue.  Although that's going to be a pain in the butt to get all my apps and everything back.  If I restore to factory settings, is there any way I can "upgrade" the to iOS 5.0 (or anything below the latest)?

    No, you haven't lost anything.  Simply sign into your iTunes account on the computer.
    As for the device not syncing, what specially happens when you try to sync?

  • My mac redirects me to other sites all the time.its some what slow.how can i fix?

    my mac redirects me to other sites all the time.its some what slow.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Name/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • After upgrading my Mac to OS X 10.8 Mountain Lion, all my Adobe CS4 cannot use.

    They shows an error code 150:30.

    The CS4 applications are not supported on that operating system. That OS didn't exist when the CS4 applications were being developed.
    system requirements:
    http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-effects.html#main_Af ter_Effects_CS4_system_requirements

  • After upgrade to Maverick, no pilot for canon MP600 scanner, i need to install back the old OSX, how can I do?

    I  need to ungrade from Maverick to my old OSX?
    I don't know how to start.
    The problem is that Canon MP600 is old and have no interface for scan, even command from the printer function keyboard.

    Erase your hard drive then install the OS X version your prefer. If you have a backup of the old system, then erase the drive and restore the backup.
    Since you haven't provided any useful information about your hardware or what system you want to install, this is as far as i csn go.

  • My wife and I upgraded our computers to OSX Mavericks and now she has all my information on her computer. How can we solve this problem. We do not share our Info with each other. This is terrible. Please help asap. Thanking you in advance Larry

    When my wife and I upgraded to OSX Mavericks the person I was talking to on apple support said I could use My apple ID and password to up grade on my wife's computer also. Well after we got finished she had all my Info from my computer on hers. It took about 6 hours to install the whole upgrade. They said if you have any problems just to call back and we will help. Here it is on a Sunday and I call every 5 minutes and all I get is a busy signal. If they are not open on Sunday's then why don't the just say so.The number I keep calling is 1-888-263-3394.I don't understand anything about iCloud, maybe thats why all my Info is on hers to. Larry

    My wife uses my Apple ID and password to download and install all her software because that way we only pay for it once and get essentially a family license. Otherwise we would each have to purchase and pay for our own copy. However, that only applies when we are purchasing software from the App Store or the iTunes store. We each have our own individual iCloud accounts where we store our personal Contact, Calendar, and other data. You can change the Apple ID on your wife's computer by going to System Preferences > Accounts and choosing her account then clicking on Apple ID: Set.
    Now if you want to make things more intertwined you and your wife can share your contacts, calendars etc with one another with read only or read write priveleges.

Maybe you are looking for

  • Merge can't accept a variable in the select clause?

    oracle 10.2 I have a stored procedure. I have a variable, vseq, which I set a sequence variable. With all other sql statements I can do insert into table a select vseq from dual; Apparently a merge can't handle variables in the select clause. I get a

  • Unable to launch service engine on UC560

    Having UC560, I cannot open session to service engine to perform factory reset. Here is what I've tried to do. 1. Copy factory config UC560-T1E1-K9-factory-8.6.0.cfg to startup-config and power-down/power-up UC560. 2. Then try to enter service engine

  • Creation package.

    Helo, Can any one help me how to create package in smartform. I tried to copy a standard program and it is asking for package location. Pls help me out.

  • Survice providers

    Send setting

  • Will upgrading from 10.5.8 to 10.6 erase stuff like Safari 5 and revert it

    I'm finally ready to make the jump from 10.5.8 to Snow Leopard now that's it's been well worked-over, but I'm trying to assess how much down-time I'll have afterwards. Is the 10.6 upgrade DVD smart enough to not overwrite my Safari 5.x install with S