After upgrading to mountain lion, i find that my mail app does not have a "VIP" Tab. Was wondering if anyone else has this issue and what it is about?

after upgrading to mountain lion, i find that my mail app does not have a "VIP" Tab. Was wondering if anyone else has this issue and what it is about?

First, select sender(s) as VIPs. Then the VIP category will appear.
To select a sender as a VIP, open an email from that sender, then hover over their name and a star icon will appear to the left. Click the star, and that sender will be set as a VIP (and the category will appear in the pane on the left).

Similar Messages

  • When I try to update itunes, it tells me that itunes can not find a pathway to my computer. I was wondering if anyone else had this issue and how to resolve it?

    When i plug my iphone into my computer and try to sync it with my itues library, a message comes up saying I can't sync until i update itues.  When i try to update itunes, a message pops up that says itunes cannot find a pathway to my computer and it tells me to find a pathway.  I have no idea what this means and i have played around with it for weeks now.  Can anyone help me??

    The first message says "The feature you are trying to use is on a network resorce that is unavaliable.  Click ok to try again, or enter an alternate path to a folder containing the installation package."  Then when i click ok a message that pops up says "The path cannot be found.  Verify that you have access to this location and try again, or try to find the installation package "iTunes64.msi" in a folder from which you can install the product itunes."
    That's perfect, thank you.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • After upgrading to Mountain Lion, i can't connect to app store or safari

    After Upgrading to Mountain Lion, I can't access the app store, itunes store, Safari - anything that requires the internet.  I tried resetting my modem and rebooting.
    I also tried deleting items from the keychain that look like they are related to the above.  When I did that and rebooted, It works for a little while, and then gets back to where it won't login to anything on the internet and safari won't load anything.

    This means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

  • I'm help a friend with a new 4S iPhone.  He's converting from an old 3GS.  We've gone throughout the activation, update to iOS 5.0.2 and restored.  Now I'm surprised to find that the Facetime app is not on his new 4S iPhone.  How do we fix this?

    I'm helping a friend with a new 4S iPhone.  He's converting from an old 3GS.  We've gone throughout the activation, update to iOS 5.0.2 and restored.  Now I'm surprised to find that the Facetime app is not on his new 4S iPhone.  How do we fix this?

    I would suggest you read the user guide.  There IS no Facetime App for the iPhone.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    < Edited By Host >

  • I smashed my IPAD glass and after having it repaired I am no longer able to access wifi unless I am right next to my router.  Has anyone else had this experience and what is solution?

    I smashed my IPAD glass and after having it repaired I am no longer able to access wifi unless I am right next to my router.  Has anyone else had this experience and what is solution?

    Given the complexity in merely getting the thing open, that is likely. Or they forgot to reconnect it. See #14  and from #52 on down in: http://www.ifixit.com/Guide/Installing+iPad+2+GSM+Bluetooth-Wi-Fi+Antenna/6166/1

  • HT201269 I have an iphone 4 and the screen is jumpy and after a liitle while the colors change, has anyone else had this happen and what did you do (if anything) to fix it?

    I have an iphone 4 and the screen is jumpy and after a liitle while the colors change, has anyone else had this happen and what did you do (if anything) to fix it?

    Read: http://support.apple.com/kb/TS4436
    It is pretty short so here is the entire text:
    Symptoms
    A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
    Resolution
    Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
    Which is exactly what eelw wrote.
    No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
    ... identifying themselves as Apple employees.

  • My final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?

    my final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?

    What version of FCP X are you using?
    What is the full spec of your Mac?
    What codec (file format) of video are you working with.
    Andy

  • I have an ipad 2 that is mounted horizontal in the wall. added the iaqualink pool control app. but the app does not have the ability to turn horizontal. is there anyway to manually turn and lock the app.??

    i have an ipad 2 that is mounted horizontal in the wall. added the iaqualink pool control app. but the app does not have the ability to turn horizontal. is there anyway to manually turn and lock the app.??

    Yes.
    http://ipadinsight.com/ipad-basics/how-to-add-a-website-to-your-ipad-home-screen /

  • After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w?  How can I get this set up to print?

    After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless.    Any help on how to setup or reconfigure would be apprecaited.
    I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc.  Have gone through all the standard fixes, reboot, reset , reload driver, etc.

    From the link to the Thread you provided, I worked through the one message procedures that were listed.
    For ease of reference, I have copied them and printed them below.  This was an old thread but the guidance still works with no firmware upgrade required.
    I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc.  I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer. 
    I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection.  Apple needs to be talking to Samsung to get the USB issue resolved.  I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
    Here is the steps I followed to get my ML2525w to work in the wireless mode.  Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly. 
    As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB).  From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
    Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job.  1st page sometimes printing but all the rest of the pages were garbage.  No printing at all. Printer just running a bunch of blank pages out. etc.
    I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
    "I've just installed one of these printers for my parents.
    First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
    Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
    This is what I did:
    (1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
    http://www.samsung.com/us/support/downloads/ML-2525W
    Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
    (2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
    (3) Restart your Mac.
    (4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
    (5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
    (6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
    (7) The Wireless Setting application will then tell you to disconnect the USB cable.
    (8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
    (9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
    (10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
    Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
    MacBook (white 12"), Mac OS X (10.6.5)

  • HT204563 Having an issue opening Microsoft Outlook after this update. Anyone else having this issue, and if so, do you have a fix?

    First post.
    Microsoft Outlook won't open after the latest security update. Anyone else experiencing this? If so, is their a fix? If so, what is it?
    Thank you!

    Try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • After upgrading to mountain lion, contribute cs4 did not open

    After upgrading to Mountain Lion, I found that Contribute CS4 did not open.  In searching for an answer I found the following on the Adobe forum:
    "Earlier versions of Adobe Photoshop (CS3 and CS4) software were also tested with Mountain Lion and there are currently no known issues."
    So continuing to search, two days of frustration ensued as I "chatted" with 2 unhelpful Adobe customer support reps, searched unhelpful Apple and Adobe websites and posted my question in various places.  Finally I found that the above statement was completely wrong when I received the following from an Adobe staffer:
    Mountain LION is not a supported platform for Adobe Contribute CS4. The supported versions are Latest Adobe Contribute 6.5 and Adobe Contribute CS5.X.
    And now I have to spend hundreds in order to maintain my website after upgrading to Mountain Lion.  I don't even know to whom I should take my complaint, Apple or Adobe.  Does this mean I have to research every piece of software I use before upgrading my Mac?  At the very least, Mac owners should be forwarned of platform support failures for major 3rd party producers. I'm doing my bit here.   How about you taking some responsibility?

    I just baught a new imac from the apple store and loaded mountain lion when I got home due to the time it would take there.  I then used migration assitant to load CS4 from my mac pro that is using snow lepord.  This worked flawlessly. CS4 and Bridge work great.  I then downloaded the mountain lion upgrade to my wifes mac pro that was also using snow lepord and once mountain lion was instaled it disabled CS4 compleatly.  I will repost the results tomorrow. I believe that I can reinstall CS4 to her mac pro now that she has mountain lion installed using migration assistant from my mac pro since it worked this way with the new imac.  I hope this works because I want to upgrade my mac pro to mountain lion but can't afford to lose CS4. 

  • Dashboard widget with streaming video breaks after upgrade to Mountain Lion

    Hi.  I recently upgraded from Snow Leopard to Mountain Lion.  Under SL, I had an OS X widget that was a web clipping of a streaming mpeg image being produced by a Linksys/Cisco WVC54GCA web camera.  When I brought up the dashboard, the OS would start streaming the data from the mpeg filename, which looks like "hostname.com/img/video.mjpeg". 
    After upgrading to Mountain Lion, I noted that the widget never fully loads, indefinitely displaying a "Loading Clip..." mesasge.  After deleting and re-adding, I can still get as far as adding the web clipping to the dashboard at the right dimensions, but there's no content.
    Unfortunately the camera unit doesn't provide for the display of HTTP access logs, so I can't see if there's an issue there, but my understanding is that if I can display the image in a Safari browser, it should work just fine in Dashboard too.  (I did make sure that, where needed, the username/password for accessing the video are included in the URL.) 
    I did sniff the network traffic between my system and the camera host, and show that video traffic starts flowing between the two as soon as the widget is brought up.  So, it's almost like the widget doesn't know when to stop "loading" and start "displaying," perhaps because the HTTP request is never truly "done."
    Can anyone speculate if something may have changed in Mountain Lion affecting the ability of web clipping widgets to display streaming video?
    Thanks,
    Chris

    Hi James
    I have exactly the same problem with the same "Loading clip" then blank.  I have been trying a lot of stuff to get this working, but haven't had the chance of sniffing the network traffic as you have done.  By reading what you said about the traffic seems to be flowing without the picure being displayed makes me even more puzzled by this.  I never had a streaming video while  I were using Snow Leopard, but I had a still-image, as I also do now in Mountain Lion.  I recently began to research for a way to display the video.cgi MIME image that my camera produces, and I've also concluded that this should be an easy task for the dashboard web clip function; the video does display in safari after all.
    I suspect that our cameras uses the same built in webserver solution written by a "Steven Wu".  Cheap webcameras frequently uses his script with MJPEG (stream of JPEG pictures) to avoid the expensive licenses of using other video codecs.
    I read this a bit down at this site: http://channel9.msdn.com/coding4fun/articles/Everyone-Loves-Babies-Webcams-and-M otion-Detection
    Have you come any closer in your research?
    I have started to think that maybe I have to write a dashboard widget on my own to accomplish this.
    trelements

  • "not available for FaceTime" error after upgrading to Mountain Lion

    I have an iPhone, iPad, MacBook and Mac Mini and have had no problems receiving FaceTime calls on any of these devices until I upgraded to Mountain Lion. Now everytime someone tries to call me on FaceTime they get an error that I'm not available. I can call them just fine.
    Using my wife's iPhone I tried to debug the issue and found that after I toggle FaceTime off then back on using the Mac mini that I could receive a faceTime call. However, after a few days I am no longer able to receive a call.
    Has anyone else had this issue and know of a fix?
    Thanks!
    David

    Thanks, but this didn't work for me.  I did a fresh install, so there was no subfolder in my Barnes and Noble folder.
    I tried the second suggestion from NA Smith too, but that didn't work either. 
    I had this problem last year on my imac, and I gave up on Barnes and Noble. But I had one book I wanted to access (a diet book), and tried again on my new Macbook Pro.... same frustrating thing, even after all this time - shame on B&N!!!
    So, I bought the one book again, this time at Amazon.  I feel sorry for anyone who has bought many ebooks from B&N - they are definitely not even trying to be serious about their software - I assume the have a couple high-school kids working part time (?).

  • Mail problems, slow browsing and Facebook problems after upgrading to Mountain Lion

    Hi !
    I have a 27” iMac from late 2009 which started acting really strange after upgrading to Mountain Lion.
    Before that everything works fine but now Mail does not work, will not send replies or add attachments and browsing has become so slow that it usually times out. Another strange problem is Facebook messages which does not work at all (cannot read nor send(.
    I have Lenovo laptop connected to the same network so I can benchmark and browsing works just fine on that aswell as FB messages.
    Anybody got a solution to this other than using the iMac for offline use only ?

    Hi !
    I booted both the modem and router but it did not help. Then I tried using the iMac on wireless and now it works so must be something in my D-Link router.
    Thanks for pointing me to the right direction !

  • After "upgrading" from trial to FCPX 10.0.3 multi cam does not work

    After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
    When I double click the multi cam clip I see all four angles in the timeline, one underneath the other... 
    Any help is appreciated! Thanks!

    There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
    in the iTunes Store.
    The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
    Can't recommend them enough.

Maybe you are looking for