After upgrading to Photoshop CS5, my custom shortcuts no longer work.

They show up correctly in my pull down menu bars but they no longer do anything when I hit the keys.  I'm baffled enough to go back to CS4 where they still work.  Anybody?

I just did the upgrade and imported my settings.  Sorry but it's been 
quite a while since my upgrade and I don't remember the specifics.  
However, as I said, the shortcuts are displayed in the active pull 
down menus just as the normal shortcuts are.

Similar Messages

  • After upgrade to FCPX 10.1, paste attributes no longer works. Has any one had a similar experience or have an answer?

    After upgrade to FCPX 10.1, paste attributes no longer works. Has anyone had this issue or have an answer to it?

    Are you sure it does not work at all? Could be a problem with a particular project, or clip.
    Create a completely new project, add some clips to it, Cmd-C in one clip, and try Paste Atributes into another. Does it not work?
    Also, by "does not work" do you mean it is greyed out, or the window appears but nothing happens when you click "Paste"?

  • After upgrading to FF4, my back, forward, buttons no longer work

    After I upgraded to FF4, my back, forward, and refresh buttons no longer work. I have tried restarting with Addons disabled, still an issue. Even the Alt-back arrow does not work. As well, the URLs no longer appear in the address box when I use Most Visited shortcuts.

    duh, I thought that I had disabled all the addons, but I hadn't. The culprit turned out to be: Favicon Picker 2 0.6.1.14.
    https://addons.mozilla.org/en-us/firefox/addon/favicon-picker-2/
    After disabling this add-on, everything went back to normal.
    mgdff

  • After upgrading to OS 7.1.1 Maps no longer works correctly.  It is constantly "locating" and does not do real time updating.  Tried "Scout" map app it does the same thing.  Do I have something not properly set up for viewing Maps the way I used top?

    After upgrading my iphone 4s to 7.1.1 the Maps application does not work properly.  It updates very slowly and is constantly "locating".  Why is this happening after the upgrade?  I also tried SCOUT App it is does the same thing.  It seems like it is losing the GPS position.  Is there a fix for this?

    Any change after turning Airplane mode off and on and/or or after turning Location Services off and back on?
    If not, any change after doing a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

  • Keyboard shortcuts no longer work after upgrade to ios 6

    After upgrading to iOS 6, the keyboard shortcuts on my iPhone 4S no longer work.  Not only that I can't change them either.  If I add or delete a shortcut, it simply goes back to the way it was when I exit the settings and go back in.   My iPad 2 doesn't have this problem, only my iPhone 4S.
    I tried restarting as well as doing a reset (hold home and power button).
    Any idea how to fix this? 

    If you want to go through all the steps I took:
    1. Restart
    2. Soft reset (hold home and power until Apple logo appears)
    3. Reset keyboard dictionary
    4. Reset all settings
    5. Clear autofill
    Only after the last step did things start working.  Prior to that I couldn't make any changes I made to the keyboard shortcuts stick, though every now and then changes would take.  Sometimes trying to delete a shortcut would crash the settings app.  In all cases the shortcuts didn't work.

  • How do I upgrade to Photoshop CS5.1

    How do I upgrade to Photoshop CS5.1.  I now have PS CS5

    An upgrade to CS5.1 is not possible now. Why don't you try CS6? More information on Photoshop CS6 here
    Thanks
    Nikhil

  • After upgrading to Mavericks, F14/F15 brightness adjustments don't work

    After upgrading to Mavericks, F14/F15 brightness adjustments don't work.  The screen appears to be "locked" at the dimmest brightness level.  How do I adjust the brightness?

    I am home now and I just confirmed that I have a brightness control slide in my Sys Pre---> Display. However, this for my Apple Cinema display. When I was using another name brand, this wasn't available to me. Nor could I use F1 and F2.
    I also went to Sys Pre---> Keyboard---> Shortcuts---> Display---> Changed those values to F5 and F6, since they were free for me. And they were able to change the brightness for me. Went to test them, and I was just given that error chim and nothing on the display changed.
    So I went on down the list... Accessibility---> checked Contrast and changed those to F5 and F6. Ahhh, now I can change that. Now I know that I can use the F5 and F6 for something.
    I know that you are talking about brightness, but double check the Contrast settings to see if you were mistaking the two. After years of setting my TV with Video Essentials, I still get the two mixed up from time to time.
    KOT

  • After upgrading to lion vevo, youtube, and hbo no longer plays videos. I'm assuming this is some kind of plug-in issue. How can I resolve it?

    After upgrading to lion, vevo, youtube, and hbo no longer plays videos. I'm assuming this is some kind of plug-in issue. How can I resolve it?

    Adobe has published a list of known issues relating to Mac OS 10.7 Lion here:
    http://kb2.adobe.com/cps/905/cpsid_90508.html
    The download page for Flash Player for Mac is here:
    http://get.adobe.com/flashplayer/?promoid=ISMRZ

  • After upgrading to Lion can't get Boot Camp to work! Just get "startup dusk cannot be portioned or restored to a single partition"?

    After upgrading to Lion can't get Boot Camp to work! Just get "The startup disk cannot be partitioned or restored to a single partition". Anytone?

    This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
    Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
    Then partition.
    Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
    You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

  • After upgrade to 4.1 connection to radio doesn't work

    My car radio has a usb connection to my Iphone 4 and it allows for charging and audio to play through the USB cable. After my upgrade to iOS 4.1, the audio no longer works properly. It will play sound for 5 to 10 seconds and then it will stop for about 1-3 seconds and then start playing again. It continues this cycle non stop.
    It worked perfectly before my upgrade to 4.1....Well actually 4.0.1 didn't work. 4.0.2 worked perfectly...and now 4.1 doesn't work.
    Any advise as to how to fix it?
    If it matters...this is my radio.
    http://www.pioneerelectronics.com/PUSA/Products/CarAudioVideo/In-Dash/DVD-Receiv ers/AVH-P3100DVD

    Another with the same problem, AVH 3100-DVD Pioneer headunit, just updated to 4.1 and am getting frequent random audio dropout when playing audio.
    Have confirmed it is only with USB audio playback, happens on car stereo stated and with Magnasonic alarm clock w/ dock adapter.
    Checked w/ Pioneer the firmware I have on my headunit is up to date based on SN#. And have done a full DFU restore, fresh ripped tracks from CD in AAC and still occuring.

  • After upgrade my iphone 4 to IOS6, sound doesn't work correctly

    After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
    During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • After upgrading from it6 to itunes7 my videos doesn´t work

    After upgrading from itunes6 to itunes7 my videos doesn´t work. Theres no error message, no reaction. all the music play like befor, only my vids (quicktime), all!! the vids doesnt work after updating..i hope, that someone could help me..
    Many thanks
    Cross

    hmmmm. let's try checking to see if they will still play in your current version of QuickTime.
    in itunes, right-click on one of the videos that is causing the grief, and select "Show in Windows Explorer".
    right click the icon of the file in the Explorer window that comes up and select "Open With ...", and try to open it with your QuickTime player. does it play there or do you get funny business with that too?

  • I have Photoshop cs5 and the pen does not work. The icons below also do not work. Why? and how can I activate them? Thank you , Wren

    I have Photoshop cs5 and the pen does not work. The icons below also do not work. Why? and how can I activate them? Thank you , Wren

    Why?
    Do you expect an answer to that question based on the information you have provided so far?
    Please read these and proceed accordingly:
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    http://forums.adobe.com/docs/DOC-2325

  • I upgraded to PhotoShop CC 2014 and can no longer access my NIK Collection.  It worked fine in PhotoShop CC?  What can I do?

    I upgraded to PhotoShop CC 2014 and can no longer access my NIK Collection.  It worked fine in PhotoShop CC?  What can I do?

    Contact Nik/Google for updated plugins that work in the new version of Photoshop.

  • After installing the Maverick upgrade my Apple Mail search and flags no longer work correctly?

    after installing the Maverick upgrade my Apple Mail search and flags no longer work correctly? I've already rebuilt the mailboxes with no change in the problem. What else can I do???

    Hi as2020,
    If you are having issues with Mail in Mavericks, you may want to make sure you have updated to the most recent release. You may find the following article helpful:
    OS X: About Mail Update for Mavericks
    http://support.apple.com/kb/HT6030
    Regards,
    - Brenden

Maybe you are looking for

  • No Longer Seeing Rintone Icon Next to Songs, Message

    Since Ringtones were introduced to iTunes and until last night, I had a ringtone icon next to a small percentage of songs in my library. Today, they're gone. The ringtone (bell icon) column remains, but it's empty. Out of curiosity, I clicked on one

  • Is there a way to display the legend for a chart, but not the chart?

    Hi, I have a stacked column chart and a line chart on top of each other.   I can't use the legend for the stacked column chart because the data will change from month to month, and the 2 charts will not be aligned.  I copied the stacked column chart

  • Password protected PDF files not opening in Android

    Hi I was trying to open my credit card statement on my Android Galaxy S2 I9100 phone. Although it looks like that the Adobe reader 10.0.2 version (Build 40862) is capable of opening  Password protected files but I got an error "The document cannot be

  • How to write ABAP code to split a sentence into Word by Word ???

    Hi all, I have to split a sentence into word by word and store them into separate columns. This sentence is nothing but a text description (TXTMD) from table TXXXX. The description will have 3 or more than 3 words and LAST word will be always with %'

  • Ora-00257:Archive error

    Hello Everyone, ORA-00257: archiver error. Connect internal only, until freed. My Question is why oracle is not allowing to connect as normal database user like Scott during archive log is full, as i know archive log is generate during ddl/dml statem