After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Similar Messages

I am using migration assistant with my old MacBook and a new iMac but I'm just getting a swirling bar and spinning wheel. No signs of any progress after an hour. Drive is about 250 gbs.

The old MacBook says "the other mac is ready" and the new iMac says "successfully connected to other Mac. They are connected via Ethernet. Shouldn't there be some sort of indication of progress? It just looks like they're stuck.
Thanks!

The old MacBook says "the other mac is ready" and the new iMac says "successfully connected to other Mac. They are connected via Ethernet. Shouldn't there be some sort of indication of progress? It just looks like they're stuck.
Thanks!

HT4889 I am using migration assistant from my old macbook pro to my new imac, but it seems to have stuck about 1/3 of the way through. Any suggestions??

Both are on the latest version of MacOS (made sure I had them completely up to date before starting).
Laptop and imac are connected via ethernet cable. Has been stuck for at least 2 hours showing "About 3 hours and 12 minutes remaining". Not sure what to do??

Disconnect and connect your Ethernet cable. If the migration doesn't continue, restart both Macs and start the transfer again. Wi-Fi and Ethernet are slow so I don't recommend you to use it unless it's the only option you have

How to use Migration Assistant from OS 10.7.5 mac to new mac Maverick?

Got a new imac. I'm trying to use Migration assistant from my non-Maverick imac to the new one. I'm told that I have to update my former mac, but it's too old to update to Maverick.
So, how can I use Migration Assitant to transfer files?
Thank you.

The easiest method is to use the Time Machine backup from your old computer and connect it to the new machine. Then launch Migration Assistant on the new machine and use the TM backup HD to migrate to the new machine. DO NOT do this wirelessly, your profile indicates you have a Time Capsule, if you use that for your TM backup then connect it via eithernet to your new iMac to do the migration.

Can u use Migration assistant from 10.5.8 to 10.7.2?

My new MacPro is OS X 10.7.2 and my old one is 10.5.8. Migration assistant does not work either from eithernet hookup or Firewire 800. Is there a software patch or update for either box to allow migration from Old OsX 10.5.8 to 10.7.2?

Yes, but you must use Migration Assistant from the new computer and boot the old computer into Target Disk Mode - Transferring files between two computers using FireWire.
Mac OS X 10.7 Help- Transferring files between two computers using target disk mode
How to use and troubleshoot FireWire target disk mode
OS X Lion- How to use Migration Assistant to transfer files from another Mac
Migration Assistant tips and tricks

How can I do to use my adobe cs3 taken from my old powewrbook to my new Imac?

How can I do to use my adobe cs3 taken from my old powewrbook to my new Imac?

Well, sorry to bring you the bad news, but you can stop right there. CS3 is not compatible with OSX 10.8 or 10.9.
Mylenium

HT4889 I just transferred data using migration assistant from a macbook prop to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect.

I just transferred data using migration assistant from a macbook pro to a macbook. I am trying to log back into the user that was on the pro but is now on the macbook with the same password as before, and it says my password is incorrect?

Suggest you try the password for the Macbook, not the previous one.

How can i use migration assistant from a Power PC G4 powerbook?

How can i use migration assistant from a Power PC G4 laptop that can't run 10.5 to a new mini running Lion? Mini's MA says I have to upgrade the laptop's MA but the upgrade requires 10.5 as a minimum
help,please
jan

That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

How do I copy files from my old pc to my new imac?

how do I copy files from my old pc to my new imac?

There are many methods, however you are specific about the type of files you want to move. The first time your Mac turns on it begins with Setup Assistant and asks if you want to migrate from another Mac or PC, you must have missed that. I'd recommend looking over Pondini's Guide and following the directions for using Migration Assistant. You can find them by clicking How to Use Migration Assistant From PC to Mac 10.7 Lion.
If you have specific files you are attempting to migrate then moving them to an external HD and then just dragging and dropping them from the EHD to the Mac would be very simple. Apple explains migration strategies in Switch 101

Migration Assistant from PowerBook 10.3.9 to new MacBook Pro?

A friend has just bought a new MacBook Pro. His previous Mac is a PowerBook (G4 1.0 GHz 15" FW800 - Aluminium) still running Panther 10.3.9.
He's asked me to help him migrate his files, settings, apps etc. to the new Mac. I had thought to use Migration Assistant/Setup Assistant to do this, but the manual for the MacBook Pro says:
+"Before migrating, use Software Update on your other Mac. The other Mac should have one of these versions of Mac OS X software—either Mac OS X v10.4.11 or Mac OS X v10.5.6 (or later)."+
Does this mean you can't migrate from a Panther Mac to Snow Leopard using Migration Assistant?
TIA,
Chris Adams.

You use Migration Assistant from the new machine. The old machine needs to be started into Target Disk Mode. Both machines need to be first connected via Firewire cable. See the following:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

If your "older" MBA has a Thunderbolt port then it isn't that old. See Target Disk Mode about how it's used. Note that without a monitor you won't be able to tell from the screen when it has fully started, and if it succeeded in starting in TDM. If it did, then the hard drive should appear on the Desktop of your new computer. You can then access it to transfer your files. You can even use Migration Assistant or any backup utility to transfer data. Just don't try to transfer system files.

How can I move my Premiere elements 8 from my old pc to my new imac?

How can I move my Premiere elements 8 from my old pc to my new imac?

tenfootprints
Does your imac come with a Windows Mac interface?
If not, you cannot. There is no Premiere Elements 8 Mac version. And, you cannot install Premiere Elements 8 Windows on
a Mac computer. As I recall, Premiere Elements 9.0/9.0.1 was the first Premiere Elements version to be offered in Windows and Mac versions.
Please explain with more details.
Thanks.
ATR

I just migrated everything from an old Mac to a new one, but now Acrobat Professional will not launch. I get an error message: "Adobe Acrobat 8 Professional cannot be launched at this time......"

I just migrated everything from an old Mac to a new one, but now Acrobat Professional will not launch. I get an error message: "Adobe Acrobat 8 Professional cannot be launched at this time......"

I used "Migration Assistant" to send everything from my old mac to my new which included my copy of Adobe Acrobat 8 Professional. I tried downloading an update but when it asked me to find the version of acrobat to replace it was grayed out and I was unable to select it. My OS is 10.9.4

Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan

Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan

The easiest way is to connect the G5 and your new iMac together via Firewire. Then you can use what is called "Target Disk Mode" which basically makes the G5 look like an external hard drive to your iMac. The potential gotcha is if your new iMac does not have a Firewire port. In that case, you need to get the Apple Thunderbolt-Firewire adapter in order to connect the two machines (as far as I know, all G5's had one or more Firewire ports). I have done this many times, it's easy and works perfectly.
Alternatively, you could connect both Macs to the same network and log into the G5 from your iMac. This involves going into System Preferences > Sharing on the G5 and turning on File Sharing and then logging in from your iMac to the G5 as if it were a server. (Logging in through the Finder or via Go > Connect to Server). This also works fine but it's a little more involved than using Target Disk Mode. I do this all the time and it too works fine.
Either way, once the two Macs are connected, you will use the Finder on your iMac to copy files/folders from your G5 the same as you would from any external hard drive. Regarding iTunes, you could just copy your entire iTunes library over to your iMac being careful to put it in the same relative folder location: /users/yourusername/Music/iTunes This method will preserve your playlists and album art. Alternatively you could go into iTunes and do Add to Library but I'm not completely sure doing it that way will bring over your album art and it certainly won't bring over your playlists.
I see no reason to use a separate external hard drive. It will just double the time it takes to transfer your files because you would first have to copy everything to the hard drive, then in a second step copy everything from the hard drive to your iMac.
Note: In all cases there is the possibility that you may need to change file & folder permissions on the things you copy over so you can access (read & write) to these folders & files once copied to your new iMac. This is not a difficult process.

I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?

I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?

You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

Similar Messages

Maybe you are looking for