After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

Similar Messages

  • My laptop won't turn on. It's been hours and all it's showing is a white screen with the apple sign and the loading circle. I've tried turning it on and off, nothing's working. Please help!

    My laptop won't turn on. It's been hours and all it's showing is a white screen with the apple sign and the loading circle. I've tried turning it on and off, nothing's working. Please help!

    Will it boot up in safe mode?
    http://support.apple.com/kb/ph11212
    or can you enter single-user mode?
    https://support.apple.com/kb/ht1492
    What version of OSX are you running?

  • HT4623 I downloaded ios7 and initially it was working fine. Now it is flashing from my home screen to the white screen with the black apple every 3-5 seconds. It's so annoying and I can't make it stop! I tried shutting down all the way - nope! HELP!

    I downloaded ios7 on my iphone 5 yesterday. All day it worked fine, then last evening it started blinking from the white screen with the black apple to my home screen. Each screen only stays up for 3-5 seconds then switches back. I have tried shutting down and it is still happening! Does anyone know how to fix this issue without having to go into the store?

    Your power adapter is OK. If the only place it will not work is in your home, your house wiring and / or the appliances connected to it are likely to be the reason your Mac will not charge.
    From Troubleshooting MagSafe adapters:
    Identify line noise issues.
    Unplug the power adapter from the wall, let it sit for 60 seconds, then plug the adapter back in.
    If the adapter works after this 60-second "rest", you most likely have a line noise issue with your power source. You should reset the adapter periodically by repeating this moment of rest. This issue occurs when the AC adapter's "over voltage protection" feature senses ground noise and then turns off the adapter.
    Some possible sources of line noise include lights with ballasts, refrigerators, or mini-refrigerators that are on the same electrical circuit as your computer. This behavior may not occur if you plug the power adapter into an uninterruptible power supply (UPS) or plug it into a different circuit.
    Unless the adapter continues to exhibit this behavior on a known good outlet, it does not need to be replaced.
    Household wiring problems are very common. They can also be very dangerous. Fortunately most problems can be easily fixed by a qualified electrician.

  • HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source.  Anyone else having this problem, please advise on how to fix.

    After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source.  Anyone else having this problem, please advise on how to fix.

    IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • I bought and downloaded iWork when i bought my macbook pro and i used to save my documents on words. then a few weeks ago, i downloaded a free trial of microsoft office but unregistered and deleted it a week after. now i can't save my documents on word.

    i bought and downloaded iWork when i bought my macbook pro and i used to save my documents on words. then a few weeks ago, i downloaded a free trial of microsoft office but unregistered and deleted it a week after. now i can't save my documents on word. It used to ask me if I want to save my documents on word, now it doesn't. And the W icon keeps on appearing on my dock. Can I return my computer to an earlier date? Please help me. Thanks

    No, I don't have a back-up of TIme Machine... to tell you the truth, I have this computer for a few years now and I still don't know how to work all of the apps that are here. Anything else I can do?

  • After "restoring" my MacBook Pro via time capsule, all I get is a white screen with the apple in the middle and the little spin wheel spinning and spinning and spinning for 24 hrs now...

    After "restoring" my MacBook Pro via time capsule, all I get is a white screen with the apple in the middle and the little spin wheel spinning and spinning and spinning for 24 hrs now...

    Hello kdcha55,
    Thanks for using Apple Support Communities. 
    To troubleshoot this issue where your Mac is stuck on the gray screen with a spinning gear, please follow the steps in the support article linked to below.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Take care,
    Alex H.

  • My Ipod is stuck on a white screen with the wrong time and a lock. computer doesn't recognized my Ipod..also gets hot when connected to charge..any ideas on how to fix this? Thank You

    Hi
    My Ipod nana...has frozen up and working. It shows a white screen with the wrong time and a lock symbol. When I connected it to my computer, it didn't show up. Back of Ipod gets really warm..Any ideas on how to fix it? Than You

    If it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
    If the issue is incurable next time, you have a one-year warranty from the date of purchase.

  • My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star that just does that for hours

    My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star (search icon). It will spin for hours and never go away unless I power off.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

    Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen?

    I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen? or how do i get the litle loading circle to go away.. it wont even load into itunes

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My MacBook Air won't start up.  It's completely powered, yet when the white screen with the apple shows up upon me turning it on, it shuts right back off.  Can someone help?

    MacBook Air won't start up even though it's fully powered.  The white screen with the apple logo appears when I turn it on, then it shuts right back down.  Can someone help me?

    Hey Msazama30,
    First, I would start off your troubleshooting by following the steps in this link:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Then, if that doesn't work, try out the information in here:
    Step by Step to fix your Mac
    https://discussions.apple.com/docs/DOC-3353
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • I Mac freeze: When powered on all I get is a blank white screen with the apple logo. No "beach ball" nothing more. Tried all the usual restarts. Help?

    I Mac freeze: When powered on all I get is a blank white screen with the apple logo. No "beach ball" nothing more. Tried all the usual restarts. Help?

    Tried all the usual restarts. Help?
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    ===========
    Your profile is a complete blank!!!!
    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK-----> Help us to help you on these forums
    ***This will help in providing you with the proper and/or correct solutions.***

  • I have a macbook and when I power it on and then select myself as a user...It won't power up. It stays in the white screen with the apple logo. I am online currently under 'guest user'. Is there anything I can do from the keyboard to fix this??? Help!!!

    I have a macbook and when I power it on and then select myself as a user...It won't power up. It stays in the white screen with the apple logo. I am online currently under 'guest user'. Is there anything I can do from the keyboard to fix this??? Help!!!

    Could you specify the model of MacBook and the OS X it's running, please? Some of the advice or references vary along with the system, so this could be helpful to formulate a reply. I've never used a Guest User selection, but do have more than one User.
    If the computer does not have an optical drive, you may be able to boot it into a recovery disk mode or something; in an attempt to see what is wrong and maybe fix it.
    Good luck & happy computing!

  • HT3964 I am not able to reboot my Mac desktop. When I switch on the Mac, I get a white screen with the Apple logo and the little wheel below that goes round and round but the computer refuses to boot.

    Hi, I am not able to reboot my Mac desktop.
    When I switch on the Mac, I get a white screen with the Apple logo and the little rotating circle.
    The system refuses to boot.
    What can I do?
    Marcus

    We need to get you moved. This forum is for mini-tower Macs built between 1998 and 2005 and doesn;t get as much traffic ("eyeballs on the problem") as the forums for newer Macs.
    Please do "About this Mac" from you Apple menu and tell us what that says for "processor" and Mac OS version. Looks like this:
    or this for later Mac OS versions:
    With that we can figure out which of the two iMac forums you need and get the Hosts to move your post.

  • Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

    Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

    Yes - well you have to make the file in a word processing Application.
    You could use TextEdit (it's free) Pages (words only), or Numbers (data base) (they are part of iWorks - and may or may not be free (included) on your machine.  You could use MS Office (it is not free) You could use any Open source word processor that plays well with Office (NeoOffice, StarOffice) they are free.
    That's how you create content and copy/paste URLS. Then you save the file to the desktop. If you are going to make more than one file... you make a folder on the desktop and save, or drag the file(s) into it.
    You attach it to your e-mail client which will compress it and e-mail it. An excellent reference is to use Help, from the menu bar, also from inside any application. From your library or book store the OS X for Dummies has a lot of useful information (you don't read it cover to cover but look up chapters about what you'd like to do)
    You can also make appointments at your local Apple store for individualized help (if a store is nearby)

Maybe you are looking for

  • Leading zeros from data downloads

    Hello! While downloading data from the ABAP tables, Excel removes the leading zeros automatically but in some SAP tables (NAST for example), those leading zeros are necessary to find the required associated data. Is there any way to prevent Excel fro

  • Customer ageing report in Document currecy- FI AR Drilldown reports

    Hi,    There is standard report for Customer Due Date Analysis S_ALR_87012168 . this report displays amount in local currency  value only. Is there any Standard report for Customer due date analysis in Document Currency. i seached SDN, there is no po

  • Background images w/aspect ratio true and clipping

    I'm trying to create a site where the background image takes up 100% of the screen, minus a 30px border around the app. perimiter. The sizing method I'm trying to replicate is at http://www.letstakepictures.info. Notice that when the window is resize

  • SQL query in bean

    public String select() try Connection conn = DriverManager.getConnection (url, dbUser, dbPassword); Statement stmt = conn.createStatement(); String query = "SELECT ID, name, summary, start_time, end_time FROM cruises WHERE ID = "'" + request.getParam

  • ABAP Structures....

    Hi Experts, I want to generate some report in ABAP from SAP but when i see the tech. Speci. of any field some time i found TABLE but sometime there we found Data Structure after looking in SE11/ SE16. Kindly guide me that how would i know that what t