Agent updates not available after restoring DPM database

Hi,
I am using DPM 2012 R2 which I have recently successfully updated to version 4.2.1297.0 (A hotfix installed to resolve an issue with Rollup 5).
I updated 3 agents successfully and planned to do the remaining 8 at a later date. However after updating the first 3 I was trying to resolve a reporting issue which I did successfully and I carried out a DPM database restore in the process followed
by a DPMsync -sync command.
I am now planning to update the remaining 8 agents but under the management tab the agent status is now showing as OK instead of Update Available as it did previously before the restore. I have checked the protected clients and they do not have the 4.2.1297.0
version installed (I checked this in case the installation had occurred). I then decided I would try and re-install the hotfix on the DPM server (kb3040326) but it seems I can't first uninstall the update on it's own so will have to uninstall DPM altogether.
I have tried to reinstall the hotfix again on the DPM server without removing it first and I get a message advising:
"A required hotfix KB3021791 is missing. Install it from http://support.microsoft.com/kb/3021791"
This update refers to Update Rollup 5 for DPM 2012 R2 which, again, is already installed on the DPM server and appears under Add/Remove programs.
It seems that since the restore the DPM server is aware that the Rollup and subsequent hotfixes are installed but the DPM application is not (although when I click the About DPM button, the version is 4.2.1297.0). I am unable to update the agents through
the DPM GUI with the latest hotfix as it is not available to them and I am reluctant to install the latest version directly onto the clients without sorting this problem out first.
If anyone has any advice that would be great,
Thanks.

This isn't a bug in Leopard or it's recent updates so it's not something you should expect to see fixed in a subsequent release. However, you're not the only one who has found there to be problems after an update and assumed the update was responsible when it's either coincidental, or simply highlighted a problem that existed on the system previously.
First thing to try when any device or ports appear to vanish on the system is to perform an SMC reset:
-From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
-Unplug all cables from the computer, including the power cord and any display cables.
-Wait at least 15 seconds.
-Plug the power cord back in, making sure the power button is not being pressed at the time.
-Then reconnect your keyboard and mouse to the computer.
-Press the power button on the back to start up your computer.
Since the SMC (System Management Controller) looks after all the internal devices, when it goes wrong it can cause very bizarre apparent failures! Resetting usually resolves these. Give that a try and post back to let us know.

Similar Messages

Iphone 3gs will not activate after restore and update

my sons iphone 3gs will not activate after restore and ios update.
phone keeps saying no service but worked fine before restore and update any ideas ? thanks

Sorry. The jailbreak is undoubtedly the root cause of your problem.
It is not always possible to repair the damage done by jailbreaking.
Try searching google for an answer, but be prepared to just buy a new phone.

After downloading Yosemite iPhoto is blocked. Update error message reads: Update not available for this ID either because it was bought by a different user...

After downloading Yosemite iPhoto is blocked. Directed to update. Update error message: Update not available for this ID either because it was bought by a different user..... This could be because my iPhone is now linked to the Mac and it is recognising that ID.

My previous post should read...Could this be because my iPhone is now linked to the Mac and is recognising that ID?

HT201263 iphone 3gs will not activate after restore and update?

Please help my iphone 3 gs will not activate after restore and update.

If it is locked to any carrier, insert SIM from the carrier. If it is unlocked insert any SIM to activate.

HT201401 After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

After updating to ios 6, my iphone 4 screen rotation has stopped working and will still not reset after restoring the iphone completely.

My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?

My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?

Leonie,
Fisrt let me thank you for your reply and assistance! So here is the problem with so more detail...I was not sure I was going to get any replies ; )
I restored from a time machine back up.
History of Failure:
I was trying to launch Aperture when the kernal panic occured. My computer had been closed, and asleep and the battery was dead. I plugged in charger and it was restoring/waking up after being asleep/shutting down from dead battery. I launched Aperture from the dock and as soon as it opened the kernal panic occured. After that the computer would not turn on. It would try to boot then it would shut off. I even tried to safe boot to no avail. I went to the Apple store and they told me that the only thing I could do was restore whole computer from back up. So thats what I did.
Since then my previous aperture library: "2011" will not open. I have created a new aperture library "2012", and it runs fine. I have added new photos for about the past month...no problems.
When I launch aperture with 2012 library then try to switch libraries, I get the following prompt: "The selected library is from an older version of Aperture and requires a relaunch to switch." I choose "Relaunch" and I get the following warning prompt: "There was an error opening the database for the library “~/Pictures/Aperture Library 20111.aplibrary”." The only option is "Quit"
Both libraries are version 3.2.3
Computer stats: 3.06 GHz Core 2 Duo, 8 GB 1067 MHz DDR3 RAM, OS X 10.6.8
I have tried to launch aperture troubleshooting by holding option+command from both the aperture icon and from the library file, neither will launch the troubleshooting feature.
I am ok with computers, but not a whiz (mechanical engineer)...to me it seems as though there is a corrupt path or file or some sort of "check" that is failing, becuase the failure occurs so fast after trying to launch aperture. Maybe that doesn't make any sense but just a thought.
I hope that you may be able to provide some insight. Thank you again for you time and I hope that you have a nice day!
Mike

Software updates not available

I downloaded the new IOS 7 via Wi-Fi with my iPhone 4. After download completed IOS 7 doesn't want to install. I get this message : software update not available for the moment. Try later.
Anyone have this issue?... Is there any procedure for this?
Thanks,
Al

Alanders wrote:
I downloaded the new IOS 7 via Wi-Fi
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

HT4061 not activating after restoring

hi
i have tried updating my iphone to os5.1 it did not , now after restoring it is trying to activate, it does not activate on wi fi & is not giving me the option of itunes, pls help

There are several possibilities:
Your firewall or antivirus is blocking access to Apple's activation servers - try disabling them
The phone has been hacked, unlocked or jailbroken - If so, there is no solution
The computer you are using has a corrupt winsock (if Windows). Open a command prompt window with Administrator privileges and type: netsh winsock reset, then reboot
The hosts database on your computer is corrupted. Open it with a text editor and delete any lines that contain gs.apple.com, then save it (you must do this as Administrator or with root privileges if you have a Mac)
Location of hosts database:
Mac: /etc/hosts
Windows: c:\windows\system32\drivers\etc\hosts

Update Not Available with This Userid - Maverick Numbers

Maverick installed on my iMac and all updates installed except Numbers. Whenever I try to update it I get a message saying, "Update not available for this userid." The Pages update went just fine. I installed both using the only Apple ID that I have ever had. Updates before installing Maverick (Mountain Lion) worked just fine. What now?

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.

Why is software update not available

I am trying to update the OS on my mother in law's iPad and it keeps saying its not available after trying for quite so e time - 5-10 minutes

This is simply because Apple's verification server(s) is getting slammed today. It's going to be a matter of "just keep trying" until you can get through.
It took me several tries to get the download going, and now that the dowload is complete, I'm in the same boat getting it installed. We'll just have to be patient, as I'm sure there are a million people trying to get through at the same time.

DataSource not available after restart

Hi,
I have created a new JDBC driver for MS SQL Server 2005 and a custom data source that is using the JDBC driver and that is connecting to my database. Upon creation of the data source, the data source is shown as available (green) and works fine.
However, when I restart my system, the data source is still there, but is not available (red). When I delete the data source and create it again, it works fine.
Does anybody know why the data source might be not available after the restart of the server? Any help would be highly appreciated.
Best regards
Holger

I don't know what I should change in the MS SQL Server. And as the DataSource works correctly once I have deleted and recreated it, I would have thought that the problem is somewhere with the application server.
A colleague of mine is using the same application and is having the same problem, although he independently created his system.
Best regards
Holger

PR 1.2 updates not available on my N8.

PR 1.2 updates not available on my N8. Any solution for this issue? Can I send it to NCC and update it?

i have tried on both *#0000# and checked for updates via Nokia Ovi Suite and still no updates found.
Latest available software for your device:
Version:: 013.016
Compare numbers:
If this version is greater than your current software version, update now to get the latest features, applications and improvements. Go to Nokia Software Updater download

I have lost all my notes data after restore. Anyone know how to retrieve notes after restore?

I have lost all my notes data after restore. Anyone know how to retrieve notes after restore?
I havent' took any backup of my notes in icloud. The moment I enter the password after restore my notes will be empty. The only option to get notes back is that after restore skip entering icloud password. But any time I enter icloud password anywhere again my notes will be empty. I have huge data saved in my notes. Apple need to look into this issues very seriously. This is the 5th time I restoring my iphone today just to get my note back.

I have the issue with losing all my notes and I don't even know why. I can't remember changing any email account info. What happened to them?
Ipad 3rd io7
Please Help!
Thank you,
S.

"Runtime update not available" when installing AIR on XP

[2011-04-09:10:54:04] Runtime Installer begin with version 2.6.0.19120 on Windows XP x86
[2011-04-09:10:54:04] Commandline is:
[2011-04-09:10:54:04] No installed runtime detected
[2011-04-09:10:54:06] Starting runtime install. Installing runtime version 2.6.0.19120
[2011-04-09:10:54:06] Installing msi at c:\docume~1\myusername\locals~1\temp\air109.tmp\setup.msi with guid {AFF7E080-1974-45BF-9310-10DE1A1F5ED0}
[2011-04-09:10:54:10] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2011-04-09:10:54:10] Runtime Installer end with exit code 0
[2011-04-09:10:54:11] Runtime Installer begin with version 2.6.0.19120 on Windows XP x86
[2011-04-09:10:54:11] Commandline is: -installupdatecheck
[2011-04-09:10:54:11] Installed runtime (2.6.0.19120) located at c:\Program Files\Common Files\Adobe AIR
[2011-04-09:10:54:12] Performing pingback request
[2011-04-09:10:54:12] Pingback request completed with HTTP status 200
[2011-04-09:10:54:12] Starting runtime background update check
[2011-04-09:10:54:12] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.6.0.19120/update
[2011-04-09:10:54:12] Unpackaging http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.6.0.19120/update to C:\Documents and Settings\conlinc\Application Data\Adobe\AIR\Updater\Background
[2011-04-09:10:54:12] Runtime update not available
[2011-04-09:10:54:12] Unpackaging cancelled
[2011-04-09:10:54:12] Runtime Installer end with exit code 0

Thanks for your help. I ran the steps you suggested, but still could not get
the installer that uses AIR to run (it failed silently). Could this be related
to the fact that I'm trying to install this on a work laptop? (I don't have
administrator privileges on the machine, or it may be locked down in some other
way.)
Below is the log of what I tried:
C:\Downloads>AdobeAIRInstaller.exe -info
C:\Downloads>This is an installer for Adobe AIR 2.6.0.19120
Adobe AIR 2.6.0.19120 is installed.
Scheduled install type: patchSame
Note: this never returned to the command prompt, so I killed it with Ctrl+C
C:\Downloads>AdobeAIRInstaller.exe -uninstall
C:\Downloads>Uninstalling Adobe AIR(all versions)
AdobeAIRInstaller.exe -uninstalldone
Note: this never returned to the command prompt, so I killed it with Ctrl+C
C:\Downloads>AdobeAIRInstaller.exe -silent
C:\Downloads>Adobe AIR is currently not installed
Installing version 2.6.0.19120
done
Note: this never returned to the command prompt, so I killed it with Ctrl+C

Mac mini bluetooth not available after updrading to OSX 10.8

The bluetooth module is not available after upgrading to OSX 10.8 on a mac mini late 2009, anyone with this issue?
Message was edited by: Magnusum

I have an issue where I get Bluetooth mouse/keyboard at the login screen, but once it goes to the desktop they are both dead. This only happens when I have my Drobos plugged up via FireWire. If I boot without those devices plugged in, it works.
Anything like that for you?

Agent updates not available after restoring DPM database

Similar Messages

Maybe you are looking for