Aggregates with Fixed values

HI
We have a requirement to create an aggregate on one of our infocubes. Dical period is going to be included as part of this aggregate. I would like to know if it is possible to set this aggregate to be populated for a fixed range of periods eg: 008/2009 - 012/2009.
I know that we can set this to one fixed date like 008/2009 but is a range of period possible? If so how can I do that.
Thanks.

Hi,
To the best of my knowledge, it is not possible to give a range as a Fixed Value for Aggregate.
However, I recommend to go for other possible options like partioning, compression, Indexing, OLAP Cache, DB Statistics etc to improve the performance of the query.
Regards,
Sekhar.

Similar Messages

Aggregate with fixed value for 0SOLD_TO__0REGION wonu00B4t work

Hi,
We want to have a aggregate for a specific region. I have problem getting the aggregate to work. When testing it for aggregates in tc rsrt, it states that it will not use the aggregate because of Characteristic/Attribute 0SOLD_TO__0REGION does not have aggregation level */%.
This in spite of the fact that 0SOLD_TO__0REGION is filtred to only include the same region and country in the aggregate and in the query.
Maybe the message with the * in the end of it means that the aggregate needs to have all regions (value * in aggregate instead of F), but if that is the case, why?
BR,
Niclas
Edited by: Niclas Erlandsson on Jul 22, 2009 10:30 PM

Hi
1.Create separate aggragates for each Attribute, using fixed values and create a multiprovider over this cube and take the report.
Multiprovider perform parallel search on aggregates hence you query retrival time will be quick.
2.Create Hierarchy variable and hierarchy node variable in the properties of IO
in this case also you won't see entirer hierarchy. if you won't provide data for other nodes... it won't display.
set authorization on hierarchy node also helps
Hope this helps
Regards
CSM Reddy

How to read the 'Input help with fixed values' of domain .

How to read the 'Input help with fixed values' of domain .
The domain has a Value range i want to read those values .
Are these values stored in any table ?
Plz help me i need it ver badly...
Thanks in Advance...

Hi Chandra Shekhar,
To read the 'Input help with fixed values' of domain , you can use the function module : HR_P_GET_FIXED_VALUE_TEXT.
iIf you enter the domain name, you will find the fixed values entered in the domain.
These values are stored in a table DD07L(DD zero 7 L). Here the values are stored based on domain name.
See if it works for you.
Award points if its helpful.
Regards,
Bhanu

Find characteristic with fixed value at planning levels

Hi Experts,
I need to know which are the planning levels that contains a characteristics with a specific fixed value (ex: 0UVERSION = 220 )
Does anybody know how can I do it?
Thanks in advance

Hi,
Please create a query (tcode SQVI) on tables UPC_PLEVEL and UPC_OPTIOS. The join will be on field GUID. Select all the fields as available for display and selection. UPC_OPTIOS has the selection values maintained for the level. Please put in
UPC_OPTIOS-FIELDNAME = 0UVERSION
UPC_OPTIOS-SIGN = I
UPC_OPTIOS-LOW = 220
this will give you all the levels that have the said value
hope this was helpful
thanks

XMLTABLE with fix value

Hello
I insert XMLData into a table. This works without problems. But now I want to insert one value as a fix value. This is not in the xmlfile but I need this information, that I know from which database is this xmlfile. I'd try with 'DATABASE-NAME', but it doesn't work.
Can someone helps me?
Thanks.
roger
INSERT INTO event_xml (name,
dtsysl,
hrsysl,
dtcptl,
nusesi,
dsp_step,
dsp_state,
bat_class,
bat_program,
bat_seqi,
bat_state,
database)
SELECT *
FROM XMLTABLE (
'Operations/Event'
PASSING xmltype (BFILENAME ('EVENT_DIR', '$fname_neu'),
NLS_CHARSET_ID ('CHAR_CS'))
COLUMNS name VARCHAR (40) PATH 'name',
dtsysl DATE PATH 'dtsysl',
hrsysl NUMBER PATH 'hrsysl',
dtcptl DATE PATH 'dtcptl',
nusesi NUMBER PATH 'nusesi',
dsp_step VARCHAR (40) PATH 'DSP/step',
dsp_state VARCHAR (40) PATH 'DSP/state',
bat_class VARCHAR (40) PATH 'BAT/class',
bat_program VARCHAR (40) PATH 'BAT/program',
bat_seqi NUMBER PATH 'BAT/seqi',
bat_state VARCHAR (40) PATH 'BAT/state',
'DATABASE-NAME');

This is not in the xmlfile but I need this information, that I know from which database is this xmlfileYou mean sth like this:
insert into event_xml (name,
                       dtsysl,
                       hrsysl,
                       dtcptl,
                       nusesi,
                       dsp_step,
                       dsp_state,
                       bat_class,
                       bat_program,
                       bat_seqi,
                       bat_state,
                       database
       select t.*, 'DATABASE-NAME'
         from xmltable (
                'Operations/Event'
                passing xmltype (bfilename ('EVENT_DIR', '$fname_neu'), nls_charset_id ('CHAR_CS'))
                columns name varchar (40) path 'name',
                        dtsysl date path 'dtsysl',
                        hrsysl number path 'hrsysl',
                        dtcptl date path 'dtcptl',
                        nusesi number path 'nusesi',
                        dsp_step varchar (40) path 'DSP/step',
                        dsp_state varchar (40) path 'DSP/state',
                        bat_class varchar (40) path 'BAT/class',
                        bat_program varchar (40) path 'BAT/program',
                        bat_seqi number path 'BAT/seqi',
                        bat_state varchar (40) path 'BAT/state') t;?

SELECT with fixed value

Hi,
I want to use SELECT....INTO TABLE statement but using a fixed value in one column, is that possible???
I'm trying to do something like this:
SELECT matnr "sy-datum" quantity FROM ztable INTO TABLE it_table.
The it_table has got 3 columns: matnr, date and quantity but in the ztable there isn't a date and I want to insert into the table with a variable or something...
Thanks

Hi,
you can do like this.
Suppose your internal table structure is like that,
data:begin of itab occurs 0,
       matnr type mara-matnr,
      datum type sy-datum,
      quant type menge,
      end of itab.
SELECT matnr quant FROM ztable INTO corresponding fields of TABLE it_table.
loop at itab .
itab-datum = sy-datum.
modify itab index sy-tabix.
endloop.
If you do like this then your column of itab-datum will have sy-datum .
I hope this will help you.
Help children of U.N World Food Program by rewarding them and encourage others to answer your queries

Travel Expense with fixed value

Hi SAP Gurus!
Anyone can suggest me how to create a Travel Expense with a fixed value?
F.e. I want to create a Travel Expense called "Lunch Reimbursement" that is always 5.20.
Thank you very much, bye!
Stefano

Stupid question, find it!
Thank you.
Stefano

How to use array list with fixed values to insert record in trigger

I have a list of number 1,30,40,45,60 . These numbers are not being changed so I don't need to keep in a table. So have to create a after insert trigger for
As
Begin
@list = 1,30,40,45,60 // Array value
for i=1 to @list.count
Insert into mappingtable(arrayvalue,itemcode) values (list[i],Inserted.Itemcode)
Next
End
Please can you help with a code
Regards
Pol
polachan

Be careful what you assume - rarely are lists of values like this truly static. One thing to keep in mind that arrays in sql server are tables. So, one example is:
set nocount on;
/* represents the virtual inserted table in your trigger */
declare @inserted table (itemcode char(4));
insert @inserted (itemcode) values ('ABCD'), ('JJKL');
select * from @inserted;
select * from @inserted cross join (values (1), (30), (40), (45), (60)) as arrayx(value);

Variables with fixed value

Is there in Java an operator that allow to a variable only a fixed set of values. For example the variable char color have only these value: "red","yellow",.. "etc".

[Enums.|http://java.sun.com/docs/books/tutorial/java/javaOO/enum.html]

SelectChoice with fixed values.

Good morning!
I'm using af:selectChoice.
I want to show a list of values to the user, and saves another values.
For example.
With sex select Choice:
I want to show MAN/WOMAN and saves M/W.
Thanks in advance,

You can do something like this:
<af:selectOneChoice
      value="#{bindings.YourAttributeName.inputValue}"
      binding="#{backing_YourPage.selectGender}"
      id="selectGender">
     <af:selectItem label="Man" value="M"
             binding="#{backing_YourPage.selMan}"
             id="selMan"/>
     <af:selectItem label="Woman" value="W"
             binding="#{backing_YourPage.selWoman}"
            id="selWoman"/>
</af:selectOneChoice>

Can I compare bind variable with fixed value in where cause

I found the problem buffer hit ratio < 70%. From monitoring, this below query is full table scan(8.5G)
I think full table scan is a problem from scanning 720MB buffer cache.
SELECT CT.LENS_ID,
TO_NUMBER (TO_CHAR (CT.EXPIRED_DATE, 'YYYYMMDD')) AS EXP_DATE,
CT.WAREHOUSE_ID,
COUNT (*) AS QTY
FROM TB_STK_BARCODE_CTRL CT
WHERE CT.EXPIRED_DATE IS NOT NULL
AND (:B7 = -1 OR CT.WAREHOUSE_ID = :B7)
AND (:B1 = -1 OR CT.LENS_ID = :B1)
AND CT.L_STATUS_ID = 'I'
GROUP BY CT.LENS_ID, TO_CHAR (CT.EXPIRED_DATE, 'YYYYMMDD'), CT.WAREHOUSE_ID;
I try to remove ":B7 = -1" from the query, and performance is OK. Index(WAREHOUSE_ID, LENS_ID, VERTICAL_TEXT, HORIZONTAL_TEXT) is used.
SELECT CT.LENS_ID,
TO_NUMBER (TO_CHAR (CT.EXPIRED_DATE, 'YYYYMMDD')) AS EXP_DATE,
CT.WAREHOUSE_ID,
COUNT (*) AS QTY
FROM TB_STK_BARCODE_CTRL CT
WHERE CT.EXPIRED_DATE IS NOT NULL
AND CT.WAREHOUSE_ID = :B7
AND CT.LENS_ID = :B1
AND CT.L_STATUS_ID = 'I'
GROUP BY CT.LENS_ID, TO_CHAR (CT.EXPIRED_DATE, 'YYYYMMDD'), CT.WAREHOUSE_ID;
any suggest please
Edited by: M.Suradech on Apr 8, 2012 8:11 PM

M.Suradech wrote:
AND (:B7 = -1 OR CT.WAREHOUSE_ID = :B7)
AND (:B1 = -1 OR CT.LENS_ID = :B1)Looks like you are attempting to make some "generic" type of query.
I'd recommend implementing something like this instead of what you currently have.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1669972300346534908

Fixed Value Date at line item level is not in changable mode when copied

Dear SDN Team,
Hi i have a problem in the Fixed Value date at the line item level in the Return sales order.
The Problem is When creating the return order with reference to the scheduling agreement (10.03.2010). In the Return sales Order at the line item level the fixed value date is coping from scheduling agreement item (fixed value date eg: 31.12.2009)
But i would like to have the fixed value date in the return order as 10.03.2010 but the field is greyed out.
But normally when the sales document is created with reference to the preceding document the same will be copied. But field is greyed out and it is not in changable mode.
Can any one help how to solve this.
I have checked also SAP Note where i did not find any messages.
In normal scenario - when the order is created without any reference the fixed value date is in changable mode until the document is in open.
Pleas help me to resolve this.
With Regards,
Jai

Hi Lakshmipathi,
I am sharing the resolution which was done to this requirement.
We have a specific condition type with statisticaly used and with routine to have KWERT with zero value,
Based on the different key combination. We have a specific key combination for the SA and SDoc and for this we need to maintain a condition record for the condition type with fixed value date and which will be linked to only the specific document. Once this is done.
We need to do update pricing in the sales order for the particular line item. by doing this the Fixed value date will be changed in the particular line item.
Thanks and Regards,
Jana

Fixed values of dynamic attributes are not displayed for bid response

Hi
I have created a bid with dynamic attributes and have weighted the options with fixed values. I publish the Rfx (bid) and all is ok. The problem is that the fixed values are not displaying when doing a bid response.
We are using SRM 7.0
Can anyone help?

No. Not yet. I think it is a bug. You should create an OSS message to SAP and ask them to pay special attention to the following code block:
Class: /SAPSRM/CL_CH_WD_DODM_DYNATTR
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH
At the end of the method, look for code context:
IF lv_object_type = c_qte.
*Set the Fixed Values Table to Invisible
lv_visible = abap_false.

Fixed Values and Value Mapping

Hi Experts,
I hav a doubt regarding these to funnctions in Messege mapping. In both teh functions , we can change a value coming from Load to some thing else.
Like
A=1
B=2
C=8.
The difference i hav noted is the in case of fixed values, we can assign the valsues in the messege mapping itself, and in case of value mapping it is assigned in the value mapping table in integartion directory, and thsi can be seen through Runtime Workbench in Cache Monitering. . Apart from that there seems to be no big significat difference in the application .
Pls correct me , if I ma missing out something.
Pls tell me if both hav the same functionality, why were these 2 functions made , any 1 of them, preferably Value Mappimg Function could hav been enough.
Regards,
Arnab.

Hi
Fixed value mapping is Message mapping Specific
But Value mapping allows u to create a Schema and group .
Value mapping functionality will be well understood in large integration where many mapping programs using same conversions.
Maintain advantage is maintance is easy with value mapping because if any chnages in value , just ID change is enogh no need to go mapping but this is not with fixed value
For instance if u r using Fixed value in 50 mapping programs u need to change in all
But if u r using Value mapping just one ID
Which one u prefer
all based upon u r landscape for mapping
Srini

F4 help not reflecting in ALV Grid for fixed values specified in domain

Hi experts,
   As per subject i have a field for which i have assigned 5 fixed values in the domain level (of that field) . The problem is when i am displaying my ALV grid output i need a F4 help and F4 Option for the same is not reflecting and i have assigned in the field catlog as shown bellow.
wa_fcat-fieldname = 'ZDEPLOY'.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-f4availabl = 'X'.
wa_fcat-key     = 'X'.
WA_FCAT-SELTEXT_L = 'Deployment Planned'.
wa_fcat-outputlen = '25'.
   WA_FCAT-EDIT = 'X'.
   WA_FCAT-REF_FIELDNAME = 'ZDEPLOY'.
   WA_FCAT-REF_TABNAME = 'ZETMDEPL'.
APPEND WA_FCAT TO IT_FIELDCAT.
CLEAR WA_FCAT.
for the above field the f4 help is not reflecting.
Intrestingly i have another field which i have declared using the same procedure for which my F4 help (with fixed values ) is reflecting in the same program .with the values as shown below
    wa_fcat-fieldname = 'ZFINAL'.
wa_fcat-tabname = 'IT_FINAL'.
WA_FCAT-SELTEXT_L = 'Final Status'.
wa_fcat-outputlen = '10'.
   WA_FCAT-EDIT = 'X'.
   wa_fcat-ref_fieldname = 'ZFINAL'.
   wa_fcat-ref_tabname = 'ZETMDEPL'.
APPEND WA_FCAT TO IT_FIELDCAT.
CLEAR WA_FCAT.
can u plz suggest me with a solution .
Regards,
Edited by: abhilash aswath on Oct 20, 2010 3:32 PM
Moderator message: please do not use SMS speak.
Edited by: Thomas Zloch on Oct 20, 2010 3:58 PM

hi,
There was a mismatch of characteristics. I resolved by matching the same.

Aggregates with Fixed values

Similar Messages

Maybe you are looking for