Aggregation issue for report with bw structure

Hi,
I am facing aggregation issue while grouping reports in webi.
We have a BW query with 16 values, which we bring to bw as structure. Out of 16, 8 are percentage values (agg. type should be average).
If we bring the data at site level, data is comming properly. But if we use same query and try sum/grouping( on region level), then percentage is getting added.
Since it's a dashboard report with lots of filters, we cannot go for seperate query at each level(site, region, zone).
How we can resolve this.. please give me suggestion.
Regards
Baby

Hi,
Since we were using structure, it was not possible to produce the required result in BO.
We change structure to keyfigures and bring all of them in to BO. All the column formulas are now in BO side.
Now it is working fine.
Regards
Baby
Edited by: Baby on May 10, 2010 11:39 AM

Similar Messages

0calweek issue for report output

0calweek issue for report output
I have loaded 0calweek in my infosource.0calweek format is displaying differently
in the report
File : 12005
PSA :12005
ODS : 012005
Cube : 012005
Report: 05/0120
I am loading first to PSA -> Process Manually to ODS -> Cube
I am using 0calweek is SAP Provided object.I am not doing anything in the 0calweek
Please advise on this.
Advance Thanks

I solved this issue. I changed the layout everything seems to working now.

OLAP tools for reporting with OPM

Has any one used OLAP tools for reporting with OPM?
If not, has anyone used Discoverer with OPM?
Thanks in advance,

What version of OPM are you using?
<BLOCKQUOTE>quote:<HR>Originally posted by venkateswara pilla ([email protected]):
Has any one used OLAP tools for reporting with OPM?
If not, has anyone used Discoverer with OPM?
Thanks in advance,<HR></BLOCKQUOTE>
null

Aggregation issue Bex report

Hi all,
I am facing the following aggregation issue at reporing level. BW system 3.5
Cube1
Material, Company code, Cost center, Material, Month,   Volume KF
Cube2
Material, Company code, Cost center, Material, Month,   Price KF
Multi provider
Material, Company code, Cost center, Material, Month,   Volume KF, Price KF
Report
- Global Calculated key figure 'Value' is based on basic KF's Volume KF, Price KF
- Time of aggregation is set to " Before aggregation" in propery of Calculated Key Figure.
- There is only one characteristics 'Company code' is used in report.
When, I execute this report, Calculated KF is not working (No values), If I change Time of aggregation " After aggregation" in propery of Calculated Key Figure, then It works but wrong values.Price gets aggregated(add ups) and multiply with Volume which is wrong.
Can you please give me a Ideal solution to resolve this.
Thanks,
Harry

Hi all,
Can I assume that there is no solution for this issue ??
Thanks,
Harry

Bussiness logic/technical flow for report with tcode MB5B

Guys,
Please send me any Functional Spec or Technical Spec of the standard SAP report with tcode MB5B ( Stock as on posting date). Any document explaining logic or technical flow is very much useful to me..I need to understand the logic and what are all the underlying tables used. I will assign more points to anyone who help me.

MB5B - Stock on posting date
The report Stock for posting date lists a company's own stocks in a particular time period (earliest date/Time 00:00, latest date/time 24:00).
The posting date is used for selection. Note that the posting date may be different from the entry date (date entered in the system) as well as the document date.
Starting with the current stock balance, the report uses the material documents to calculate the stock balance for the specified posting date.
Requirements
You need authorization to display material documents for all chosen plants (authorization object Material documents: plant, activity 03).
Output
Thisreport issues a list with the following information for each material:
Stock quantity and stock value on first date
Total and value of all receipts
Total and value of all issues
Stock quantity and stock value on last date
List of the material documents that were posted in the specified time period
To go to the detail screen for the material document item, place the cursor on a material document and choose Goto -> Document item
If you require more data and want a detailed evaluation, you can enhance the current layout or choose another existing layout via Settings -> Layout.
Tables Used :
t001; t001w; t001l; mchb, mbew,mseg.
Thanks

DATA AGGREGATION ISSUE IN REPORT

Hi,
when we were running query by selcting the the version . the data is aggregation dono where it went rong
Explanation :
we alredy loaded data with version for the year 2010.. we started laoding from April 2010 to March 2011.. as 12 fiscal periods, with 53 versiions. here version means week(1to53 weeks for year ) but we started laoding from April means 14th week of year 2010. to March 2011. til here no probelm with data every thing is matching in the report/
now the turn comes for laoding data from April 2011..Again 14 version came which is alredy in system for April 2010
now what is happening ..
when we laod data for 14 week of 2011 (April). data is Aggregating or some mixxing up with data..
so what we had done is we had added calyear in the filter so that user can see only the data for version with respective year.
even though data is Aggregation with previous year(2010) for the same version alredy in system ..
nothing is working outt..
can u pls sugest us , any probelm in the back end , need to do any changes for modelling ..
till now what we had done is deleating the data from cube and dso for April2010 for 14 version and laoding data for April 20110 with version 14 . which is toatlay new version in system.
So this Keep on continuying every time..when data not matching.
now for the Month May with version 20 we have to laod the same probelm should not repeat .
pls help with your valuable sugestion detailly.
And this forecast summary report , we have data for next 2 years. planning is doing for every 2 years from currentt date
Any queries pls let me know
Edited by: afzal baig on May 11, 2011 4:00 PM

Hi
is your data stored in a cube or DSO? If it is DSO - is version and period / calmonth a key field?
what type of key figure are you using and what is the aggregation rule for this key figure - in the infoobject definition and in the query definition?
is there anything unusual in the definition of your version characteristic? any compounding?
Why did you not use 0calweek?
regards
Cornelia

Issue migrating reports with Graphical features.

Hi guys,
I am working on migrating reports from 10g to 11g and I have an issue with the reports which contains a Graph. They are giving the following error when I run them against the 11g report server(they are running fine against the 10g server with out any issues)
The report terminated with error:
REP-56048: Engine rwEng-1 crashed., job Id: 24.
I have searched on Google, for a solution to fix them, the closest I found was Installing Oracle Graphics 6i engine in a separate Oracle Home, but this was said for 9i and 10g, you can find that in the below oracle document:
http://www.oracle.com/technetwork/middleware/reports/graph-faq-with-style-094084.html#q101
Does anyone know, if I can Install Oracle Graphics 6i engine in a separate Oracle Home for 11g too?, to make them work at least, if not modifying the existing ones?
Thanks,
Sona.

Hi Sona,
unfortunately installing Graphics 6i in a separate OH for 11g wont work. This option was only possible until Reports 10g as a temporary option while migrating to the new BI beans graphing functionality included in 10gR2 and 11g.
Reference
http://www.oracle.com/technetwork/middleware/reports/graph-faq-with-style-094084.html
Migrating Oracle Graphics 6i charts
How do I migrate my charts from Oracle Graphics to the new graph format in Oracle9i Reports or Oracle Reports 10g?
Oracle9i Reports Release 1 onwards, Oracle Graphics has been desupported. Oracle9i Reports and Oracle Reports 10g use BI Beans to generate graphs. Because of the underlying technology, there is no direct migration path from Oracle Graphics to the BI Bean graphing functionality. As such, the user will need to rewrite all of their graphs using the new Graph Wizard within the Reports Builder.
Top of Page
Can I still run my existing Oracle Reports Developer 6i reports containing Oracle Graphics charts in Oracle Reports?
As noted in the Oracle Reports Statement of Direction, Oracle Graphics is no longer shipped with Oracle Reports. However, as part of the migration path, you can still run Oracle Graphics charts in Oracle Reports if you install the Oracle Graphics 6i engine in a separate Oracle Home. You should only maintain Oracle Graphics 6i as a temporary measure while you redesign your charts using the new Graph Wizard. For further details on how to configure Oracle to use Oracle Graphics 6i, please see the Graphics Migration section in the Oracle9i Application Server Migration from Oracle9iAS Release 1 (1.0.2.2.x) to Release 2 (9.0.2) manual.
Top of Page
Can I modify or add Oracle Graphics 6i charts to my reports with Oracle9i Reports or Oracle Reports 10g?
No. You must have a separate installation of Oracle Graphics 6i Builder in order to modify your existing Oracle Graphics 6i charts since Oracle Graphics is not shipped with Oracle Reports. We strongly recommend that you migrate your charts to the new standard in Oracle Reports.
Thanks, RZ

How the data is fetched from the cube for reporting - with and without BIA

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens

Speed Issue in Report With 1130680 Records Returned

Hi
Apologies to the mods if this is in the wrong section, it contains content related to Legacy SDKs (VB6/COM), newer .NET content as well as report design issue.
I'm using Windows XP SP3 with the database hosted on my machine, an [email protected] with 2GB DDR2 RAM. Neither the client's pc nor their server are as powerful as mine. (It sucks, I know.)
A report has a speed issue for the end users. The query to the database (SQLS2008) takes 30 seconds and returns 1 130 680 records. And yes, this is the amount of records that need to be returned (the report is a Sales Details report for transactions from 2008/09/01 to 2009/03/31) Running the query through SQLSMS takes the same amount of time whether I execute the statement that the report sends or put the query into a stored procedure. The relevant indices are in place.
Our application is written in VB6 and uses the CR9 unmanaged runtime. I've written a small little CR application in VS2008 to see if running the report through the CR.NET runtime would make it quicker. I built the .NET app in release mode (with optimization and no debug data) and ran the exe to do the speed tests. The times taken for the report to run:<ul>
<li>VB6 app - 3:30s
<li>.NET app - 4:30s
<li>VS2008 IDE - 2:02s
</ul>
I have run the report three times for each app using my cellphone as a stopwatch and the times are reproducible to within two seconds.
I accidentally ran the report in the VS2008 IDE and it took 2:02s to run. Thinking that the loading of the DLLs in .NET was part of the problem, I added code under a button on the form with the following code:
CrystalReportsApplication1.Properties.Settings a = new CrystalReportsApplication1.Properties.Settings();
Assembly aAss = Assembly.LoadFile(a.CR01Engine);
Assembly bAss = Assembly.LoadFile(a.CR02EntFramework);
Assembly cAss = Assembly.LoadFile(a.CR03EntInfoStore);
Assembly dAss = Assembly.LoadFile(a.CR04ReportSource);
Assembly eAss = Assembly.LoadFile(a.CR05Shared);
Assembly fAss = Assembly.LoadFile(a.CR06WinForm);
to preload the assemblies. Unfortunately it made virtually no difference to the running time of the report.
Suggestion from The specified item was not found. on [this page|Speed issue - internal processing vs views;:
8. For summaries, use conditional formulas instead of running totals when possible.
I didn't know that, but we're doing that already.
I even tried using ngen in a virtual machine for the .NET app, but the time was the same. And yes, I know that ngen is only supposed to aid startup times and that it is actually recommended to let the JIT optimize on the fly instead of ngen optimize beforehand. What really struck me was that even in a VM (using Virtual PC 2007) using 512MB of RAM and only a single core the time was the same.
My questions:<ol>
<li>I thought that VS2008 shipped with CR2008 Basic, but according the the references in my project it's CR10. Would the CR2008 runtimes improve the report speed?
<li>Why do the CR10 .NET runtimes take longer to execute than the CR9 COM runtimes?
<li>I really, really, really need the .NET runtime to outperform the COM runtimes as our purchase of CR2008 hinges on this. As you can probably guess, we're currently using ye olde CR9.2 from 2002.
<li>Why oh why do the CR10 .NET runtimes take longer to execute than the CR9 COM runtimes?
<li>The first level of grouping is a variable which changed the grouping depending on a parameter. I changed it to a field from one of the tables and the times for the apps are:
<ul>
<li>VB6 - 2:15s
<li>.NET - 2:48s
<li>CR9.2 IDE - 2:19s
<li>VS2008 IDE - 2:34s
</ul>I may or may not be able to push it out to the client like this, I don't know. Why did the VS2008 IDE take longer this time? All I did was change the grouping-on-parameter to ordinary grouping.
<li>Why oh why oh WHY do the CR10 .NET runtimes take longer to execute than the CR9 COM runtimes? Are they just thunkers to the COM DLLs?
<li>Why does the run in the VS2008 IDE (in debug mode BTW, not release mode) run quicker than both programs?
<li>AndrewJ.requestACookie(Flavour.Strawberry, Flavour.Alternate.ChocChip, RequestMethod.Please); // Hey, it's 5:44PM and I want to go home for the long weekend! 
</ol>
Thank you and have a blessed Easter!
Edited by: AndrewJ on Apr 14, 2009 10:04 AM. Changed the CPU, I was thinking of my CPU at home.

Please re-post if this is still an issue to the .NET Development - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly.
Bottom line is CR Basic is version 10.5. CR 2008 is 12.2.x.xxxx. Install CR 2008 SP 1 to get .NET support.
And you can't compare COM to .NET, it's like comparing apples and oranges, both fruits but different flavors.

Crystal Report Viewer Credential Prompt for Report with Dynamic Parameters

The .NET Crystal Report Viewer is prompting for database credentials when launching a report containing dynamic parameters. This only occurs for reports created with SAP Crystal Reports 2011 designer. Reports created with Crystal Reports XI designer (where dynamic parameters were first introduced) work correctly.
The credential prompt window contains the following fields:
- Server Name: <server name> (disabled)
- Database Name: <database name> (disabled)
- User Name: <empty> (enabled)
- Password: <empty> (enabled)
- Use Single Signon Key: false (disabled)
The values in the prompt window which are disabled are the database connection values used during the design of the report in the SAP Crystal Reports 2011 designer.
Expected Result:
- No prompt for database credentials.
- Values read from the database should be populated in a drop down for the dynamic parameters.
Environment:
- Visual Studio 2010 (C#)
- Windows 7 Enterprise
- SAP Crystal Reports runtime engine for .NET Framework 4
- SAP Crystal Reports, version for Visual Studio 2010
- SAP Crystal Reports 2011
The database connection is being set to use a DSN. It must be a DSN as the calling application is only aware of the DSN/Username/Password values. These values are being passed to the Crystal Report Viewer contained in a Windows form.
The database connection for the report is being set as follows:
foreach (InternalConnectionInfo internalConnectionInfo in this.report.DataSourceConnections)
 // Must set the UseDSNProperties flag to True before setting the database connection otherwise the connection does not work
 if (internalConnectionInfo.LogonProperties.ContainsKey("UseDSNProperties"))
 internalConnectionInfo.LogonProperties.Set("UseDSNProperties", true);
 // Supposed to set the database connection for all objects in the report (ie. main report, tables, sub reports)
 internalConnectionInfo.SetConnection(this.DSN, string.Empty, this.LoginName, this.Password);
The SetConnection method's signature is as follows:
 SetConnection(string server, string database, string name, string password)
As you can see from the code snippet above I am setting the DSN name as the server parameter, blank for the database parameter (a database connection using DSN should only require DSN name/Username/Password) and the database username and password respectively.
Is this a SAP bug?
Is this the correct way of setting the database connection to use a DSN?
Is there some other properties that need to be set somewhere else in the report through code?
Any help would be greatly appreciated.

Thanks for the pointer to the database connection code generator. After taking a look at the output from the tool I was able to finally get the dynamic parameters to load and populate properly without prompting for credentials. I needed to tweak the outputted code a bit to match my requirements of using a DSN only connection.
Instead of updating the database connection properties contained within the Report.Database.Tables collection from the CrystalReports.Engine namespace, I changed it to replace the database connection properties in the Report.ReportClientDocument.DatabaseController.Database.Tables collection from the CrystalDecisions.ReportAppServer.DataDefModel namespace. For one reason or another, using the RAS namespace solved the problem.
Below is the updated code with the change made:
using RAPTable = CrystalDecisions.ReportAppServer.DataDefModel.Table;
foreach (InternalConnectionInfo internalConnectionInfo in this.report.DataSourceConnections)
 // Must set the UseDSNProperties flag to True before setting the database connection
 if (internalConnectionInfo.LogonProperties.ContainsKey("UseDSNProperties"))
 internalConnectionInfo.LogonProperties.Set("UseDSNProperties", true);
 // Sets the database connection for all objects in the report (ie. main report, tables, sub reports)
 internalConnectionInfo.SetConnection(this.DSN, string.Empty, this.LoginName, this.Password);
// The attributes for the QE_LogonProperties which is part of the main property bag
PropertyBag innerPropertyBag = new PropertyBag();
innerPropertyBag.Add("DSN", this.DSN);
innerPropertyBag.Add("UserID", this.LoginName);
innerPropertyBag.Add("Password", this.Password);
innerPropertyBag.Add("UseDSNProperties", "true");
// The attributes collection of the tables ConnectionInfo object
PropertyBag mainPropertyBag = new PropertyBag();
mainPropertyBag.Add("Database DLL", "crdb_ado.dll");
mainPropertyBag.Add("QE_DatabaseType", "OLE DB (ADO)");
mainPropertyBag.Add("QE_LogonProperties", innerPropertyBag);
// Pass the database properties to a connection info object
ConnectionInfo connectionInfo = new ConnectionInfo();
connectionInfo.Attributes = mainPropertyBag;
connectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
connectionInfo.UserName = this.LoginName;
connectionInfo.Password = this.Password;
// Replace the database connection properties of each table in the report
foreach (RAPTable oldTable in this.report.ReportClientDocument.DatabaseController.Database.Tables)
 RAPTable table = new RAPTable();
 table.ConnectionInfo = connectionInfo;
 table.Name = oldTable.Name;
 table.QualifiedName = oldTable.QualifiedName;
 table.Alias = oldTable.Alias;
 this.report.ReportClientDocument.DatabaseController.SetTableLocation(oldTable, table);
this.report.VerifyDatabase();
Thanks again Ludek for the help.

DIsplalying BI reports with Folder structure in SAP EP7.0

HI Dear Friends,
I have a requirement in my current project where i am integrating the BI reports with SAP EP.Iviews are associated with BI Reports.In the portal on clicking workset it should display folders in the portal content area with Icons instead of in Detail navigation .On click of the displayed folders it should display its sub content with Icons.
I tried in all ways with detail navigation but later i came to know there there is a SAP BI business package which would come up with predifined iviews associated for BI Reports.By importing this business package we can dispaly the BI content in the portal in a folder format .
i am using BI and EP 7.0 versions.
Ratnakar

resolved.
Ratnkaar

Changing JDBC Datasource Configuration for Report with Sub reports at once

The Env details are as follows
CR Developer
Version 14.0.2.364 RTM
We are using JDBC Connection Datasource for our CR2011 report which contains 30+ sub reports. Each of the sub report uses a JDBC Datasource to connect to Postgres database and Since the JDBC connection string changes on each environment we need to edit each sub report every time we switch environments.
Is there a easy way to accomplish this on all sub reports at one shot?
I am aware that if we use ODBC connection it would be easy since we can just change the DSN config and it will start working. But we are not using ODBC connection since We are seeing that our report (with too many sub reports) crashes when we use ODBC driver for Postgres.
Any help/suggestion would be appreciated.

Hello,
CR also has a fully support Java Reporting Engine. If you have Java developers available check out this forum:
SAP Crystal Reports, version for Eclipse
You can find more info and samples from here:
http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessIntelligence%28BusinessObjects%29+Home
And help.sap.com for the SDK reference material.
Don

How to generate the ATR files for reports with out manually?

Hi all,
how to create the ATR files for reports in OBIEE 11g with out manually?
is there any other method to create the ATR files by using the OBIEE Server?
please provide me the solution for this?
we are creating manually for each and every report, it is time taken process how can we generate ATR files automatically
by using the OBIEE Server?
Thanks,

Hi,
I am afraid not.ATR are attributes files contains the object's full name, access controllist (ACL), description, and so on.Each catalog object has a corresponding attributes file, I am not sure why do you have to generate the atr files.In case you need info about atr files: http://businessdecisionsystems.com/blog/?p=7
If you have huge number of similar reports(with filter variations and same kind of layout), try to play around with the xml to minimize the development effort.
Rgds,
Dpka
Edited by: Dpka on Oct 4, 2011 12:00 AM

Performance issue for Report Regions

We have an app which has as it's "Home Page" a portal-style page. The "portlets" are separate regions. Some of these regions are HTML forms, but most are report regions, invariably with PL/SQL returning the SQL query.
On our dev box this portal renders fine, in no more than 5 seconds (acceptable). On the production box a couple of the portlets go crazy, usually taking between 1-2 minutes each. I know this because I added the #TIMING# string to each region footer. The portal page has a META tag to refresh every 120 seconds.
The first thing I did to debug was to take the PL/SQL function body returning the SQL query, replace all the variables (which are just local vars, app items and page items) with hardcoded values, strip all quotes and run the "cleaned up" SQL query in SQLPlus. It executes very fast.
So my conclusion is that the problem lies with the application server (which is Oracle iAS). Is this a logical conclusion? What should my next move be to get to the bottom of this?
Even without the problem portlets the portal refresh speed varies widely, between <1 sec and >10 sec.
The application also has other pages displaying the portal regions individually. These pages (including those with the "problem portlet" queries) render ok (ie, order of 5 seconds or less). This tells me that there is an issue with having a bunch of query-based regions on the same page.
My guess is that I might need to examine the logs and/or httpd/modplsql settings of the app server. Number of simultaneous connections?
What would happen if hundreds of users used this app concurrently, navigated to the portal page and left it like that to auto-refresh every 2 minutes? Are such pages a no-no in HTMLDB?

Some more information:
When I run the page in debug mode, I see the following timings for one of the problem portlets:
11.53: show report
11.54: determine column headings
11.54: parse query
60.95: binding: ":F118_BUNDLE"="F118_BUNDLE" value="1"
60.95: binding: ":P52_STMETRICS_PRODBRANCH"="P52_STMETRICS_PRODBRANCH" value="RDBMS_MAIN"
60.95: binding: ":P52_STMETRICS_PLATFORM"="P52_STMETRICS_PLATFORM" value="LINUX"
61.35: print column headings
61.35: rows loop: 15 row(s)
[report is printed here]
61.49: FORMITEM: P52_STMETRICS_PLATFORM HIDDEN
61.54: FORMITEM: P52_STMETRICS_PRODBRANCH HIDDEN
This tells me that the bulk of the time (50 seconds in this case) is eaten up in parsing the query. What is this symptomatic of?
Another problem I've just noticed. It takes about 5 seconds to open up a region for editing (Region Definition) in HTMLDB. When I click "Apply Changes" (even without editing anything) it is taking on the order of minutes for the changes to be applied to the page. Our app server was bounced just before I noticed this.
These are the params in our DAD:
<Location /pls/toolsdb>
SetHandler pls_handler
Order deny,allow
PlsqlDatabaseConnectString ...
PlsqlDatabasePassword ...
PlsqlDatabaseUsername ...
PlsqlDefaultPage ...
PlsqlDocumentPath docs
</Location>

Query issue---Aging report with Net due

Hello Gurus,
I am just stuck very badly with a report requirement. The reports has billing doc and item with amount aggregated under different age buckets.
Ex:
Bill doc-0000000001;item-10; aged bucket 10-20days-- -100
Bill doc-0000000001;item-20; aged bucket 30-40days-- 1000
remember that these are two different rows and columns. The user wants to see the net amount due for 30-40 days i.e 1000-100=900 not 1000.
How do I achieve this?
Thanks
Simmi

Technically the report is correct, the amount of due 10-20 days is -100 while the amount due for 30-40 days is 1000 where the sum is 900. The only problem is the aging dates and line item number if you get ride of them then you will get 900 which is correct but if you drill down by date the report is correct. There is no way to achieve what they want if you have to display the line item number. Tell them this is correct.
thanks.
Wond

Aggregation issue for report with bw structure

Similar Messages

Maybe you are looking for