AIM IM The message "Hello" could not be delivered. The other person appears to be offline. The user is not accepting offline messages. How do I change this setting?
AIM IM The message “Hello” could not be delivered. The other person appears to be offline. The user is not accepting offline messages. How do I change this setting?
HI,
The simple shortest answer is that you can't (Change a Buddy's settings)
From your own end you can reply to the first Off Line IM you get on an AIM login (an accompanying IM for AIMSysMessage asks if you want them to Continue - replying No stops them)
IF you have stopped Off Line IMS than you can reset this at AIM Settings
You can log in here with AIM and Apple IDs that end in @mac.com and @me.com (iCloud issued @me.com name are an Exception)
In addition the Setting in iChat > Preferences > General Section that refers to setting the Status to Off Line on Quit stops the App starting up if iChat is not launched but the computer is ON
8:16 PM Friday; March 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously
Similar Messages
-
When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts. How can I change this setting?
The only way that I know currently know of to remove old or incorrect email addresses from the Mail app is to reset the iPad back to factory defaults, which I assume that you don't want to to. You could try leaving feedback for Apple and maybe one day we'll day be able to edit them : http://www.apple.com/feedback/ipad.html#ipad
-
The Finder toolbar, by default, has Previous and Next buttons that let you navigate back and forth in folders. I somewhat change that setting and can't go back and foreward. How do I change this setting to the original one? I tried everything! Help!
Select a Finder window, Finder->View->Customize Toolbar…, and add it back.
-
How to stop playlist display from changing to a grid display of all other playlists
You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
(1) Page Info > Permissions tab
While viewing a page on the site:
* right-click and choose View Page Info > Permissions
* Alt+t (open the classic Tools menu) > Page Info > Permissions
(2) about:permissions
In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
Any luck? -
I have looked for add-ons that could automate this configuration change, but to no avail. Only web page actions can be recorded in a macro, but no configuration changes.
A shortcut to get to the appropriate dialog box would help as well. I could manually tick/untick the box while saving all the several steps needed to get there. But I have not found it anywhere.
Thank you very much for any help you can provide me.
Best regards,
AlexHi, I want to drop a note to say thank you, cor-el. Your answer was better and faster than I could have expected. It not only solved my problem, but also opened new possibilities for more quick configurations.
I am now obliged to follow your example and join this wonderful community of volunteers that help others to enjoy this fantastic browser.
Best Regards!
Alex -
Apps will not download--says not valid to use in U.S. store says I need to use Canadian store-- have not had this problem before-- how to fix??
Try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Canada
-
I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top
You can see which apps are open and/or recently used by double-clicking the home button to bring up the taskbar at the bottom of the screen (not all apps that appear there are active) - you can then close apps on it by pressing and holding one of them for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. If you have an app 'open' on-screen then it won't appear on the taskbar, you will need to go back to the homescreen first, and it should then show when you next open the taskbar.
If you haven't already got a copy then you can download the iPad manual from here : http://support.apple.com/manuals/#ipad -
I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
<Email Edited By Host>You are only as young as you feel......
This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on only the albums or playlists that you want to sync.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want. -
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/806111]''
When I enter any keyword in the adress bar, only the google search enginge opens instead of leading direct to the desired website. In the older FF version it always lead to the website directly.
How can I change this?
Many Thanks!The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name -
My iphone is sending message from my email and not my number. how do i change this?
My IPhone is sending messages from my email and not my number. how do i change this?
Thankyouis something which imessage does to safe you money so when you send an sms while having a internet connection it send it across the Internet because thats free vs. a sms which cost pr send sms
-
I have 2 iphones and when i send a text message, it shows on the other iphone. How do i change this?
Go to Settings>Messages>Send & Receive and do one of the following:
Either uncheck the email address shown under "You can be reached by iMessage at" on both of your phones; or
If you want to continue to receive iMessages at this email address on one of your devices, on the other phone tap the Apple ID at the top, sign out, then sign back in using a different Apple ID (so both phones are using a different Apple ID for iMessage). Note: you can continue to share an Apple ID for purchasing from the iTunes and App stores. It does not need to be the same as the ID you are using for iMessage, FaceTime and other services. -
how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?
If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.
-
Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i
If you are missing using google maps - try the Nokia map app called "here"
-
Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."
If you are missing using google maps - try the Nokia map app called "here"
Maybe you are looking for
-
EXTREMELY URGENT : KM navigation through Anonymous Portal
Hi All, I have used AdminSingleFolderWoEP Selector as a LayoutSet for my KM documents.The Collection Renderer assigned is ConsumerTableCollectionRenderer. Now the problem is that for a folder structure say : Documents Folder1 File1 Fil
-
BT Wifi woes : Bt Id and App Compatability
BT Wifi looks really appealing if I can make it work. I have two problems: 1) The latest version of the BT Wifi app claims not to be compatible with my Android device, although a previous version did at least install. I tried deleting and reinstallin
-
Hi, I have created SAP transaction ivews in my portal with SAP Logon tickets to connect r/3. End users are having tendency to open multiple browser window using Ctrl+N. This way they dont have to login many times and can have many portal window open.
-
Diff between shared appl_top and multinode
Dear all, Can anyone tell me know what is the difference among shared appl_top ,shared application tier file system and a multinode installed system.. Advance Thanks Kai
-
MSI package for Oracle Calendar Client
It would make the deployment/upgrades of the Oracle calendar much easier if it was distributed as a microsoft installer package .msi file so that I could install it automatically on my windows clients by group policy. The former product "Steltor/Corp