AIO Software for Photosmart 2610 won't install on Windows 7

I've tried multiple times to install the latest AIO software for Windows 7 (Photosmart 2610) but it always crashes. I get a Fatal Error and MSI.netdevicemanager40. I tried the patch without success.

Hello racermike,
Please take a look at this document, and let me know if the troubleshooting steps help resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • Software and drivers for photosmart c309g will not install under windows 7

    hi 
    im trying to reinstall the photosmart c309g all in one printer, after i fitted a new HD im now running windows 7 32 bit, i downloaded both the basic and advanced instillation files, they both extract then disappear.
    i have tried to do a level3 uninstall, but that does not seen to work properly with the printer model or os.
    i have also cleaned out the system 32 /local/spool files (but it would not let me do all of them)
     ive also searched this forum for solutions.......what is going on
    thanks
    leslie

    Hi @leslie60 ,
    I see that you are having issues installing the printer. After extracting the downloaded drivers, they disappear. I will certainly do my best to help you.
    Something is preventing the setup program from recognizing files from this download.
    I will provide you with some steps for editing the registry to resolve this issue in a Private Message.
    In the forum beside your handle name just click on the envelope to view it.
    Before doing any of the steps, back up the registry first. Back up the registry.
    Please let me know the results.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Photosmart C4680 software won't install in Windows 8.1 64 bit

    Photosmart C4680 software won't install in Windows 8.1 64 bit. The installer starts, then never does anything. I see it in Task Manager consuming resources forever:
    Here is the version I am trying to run:

    Hey!
    Sorry for the drop-off from the thread, I must have missed your response, I apologize.
    When it comes down to the actual installation and issues revolving around that; it is no longer an HP printer issue. It is an MSI (Microsoft Installer) issue.
    For MSI support, I recommend for you to call Microsoft Technical Support at 1-800-642-7676.
    Best of luck and let me know the outcome if you think of it. Have a great day!
    I worked for HP.

  • I have uninstalled and reinstalled iTunes multiple times.  When I connect my iPod Classic I get the following message:  The software for this iPod is not installed correctly.  Please reinstall iTunes to install the required software.  Any ideas?

    I have uninstalled and reinstalled iTunes multiple times.  When I connect my iPod Classic I get the following message:  The software for this iPod is not installed correctly.  Please reinstall iTunes to install the required software.  Any ideas?

    Assuming you have windows, try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes.  You must follow this guide exactly or it will not be successful.  Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

  • HP OfficeJet J6410 won't install under Windows 8

    Hello to you all,
    Two days ago, I bought a new notebook for my daughter. She needs it for her study. It's the HP Pavilion TouchSmart 11-e000ed.
    Again, just like the situation I wrote about before in this topic over here (link: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind... the OfficeJet Printer J6410 won't install under Windows 8.
    Now this is what I've done before the problem occured:
    - I made a username and password for her,
    - I activated Windows 8,
    - I made a recovery-point,
    - I took my external DVD writer, installed Office 2007 Home and Student for her (o.k, I know it's old, but it's very o.k - and legal copy -. for her study, used it myself as well and still do, and never any complaints about that one), and activated it,
    After that and restarting the notebook;
    - the notebeek activated USB 2.0 (it does that automatically at first use),
    - installed XPS2OneNote (to use for Office OneNote 2007),
    - installed SaveAsPDF&XPS,
    - removed Norton Internet Security (I never use it, I use something else for that purpose, but was - and still am - planning to install that on a later moment),
    - I made sure the notebook can access the server we have here at home, and made a share for her.
    After that I used the OJ_AIO_J6400_Full_Win_WW_140_408.exe file (Dutch, but I'll translate the text in English).
    From this point on I will describe as precisely as possible what happened
    - - the program extracts some files, no problems there,
    - - when the first screen appears, I pressed 'Install',
    - -  a bar appears, and after that another pop-up that says tha you must allow all HP processes. I pressed 'Next',
    - - system is controlled, and after that one must agree with the licence agreements. I checked the box, and pressed 'Next',
    - - the system is prepared for installation and - yes! - there it comes... an error message.
    The error message says:
    C:\users\<username of my daughter.\AppData\Local\Temp\7zS0FF0\Setup\de..
    Please not that this is a different message than the one I got before, as I described in my posting before, (link again: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind...
    Nonehteless, I assumed that, as before, the problem was with the C+++, just like before. That is why I made the following steps:
    - I used the OJ_AIO_J6400_140_408_Scrubber program, run L4 4 times.
    - I looked for the KB2565063 update, but it isn't there anymore. So, instead, I ran all updates there are until the system said that there are no updates to be found,
    - After that I took the old installation disk that came with the OfficeJet J6410 printer, and (tried to) ran hpsetup.exe. It doesn't do a thing! Literally!!
    - after that I tried to run the the OJ_AIO_J6400_Full_Win_WW_140_408.exe file again. No success. I got the same error as before (see above, the ..\7zS0FF0\Setup\de.. thing again.
    So, what to do now?
    Anyone got some helpfull tips for me? I would really appreciate your feedback / help.
    Thank you in advance,

    Hi again,
    No, it didn't work. And, the solution you offered neither.
    This is what I've done.
    After downloading the  OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file, I tried to install it.
    It failed. I got an error message similar to the one before. 
    'C:\users\<username of my daughter.\AppData\Local\Temp\7zS57DB\Setup\de.'
    I tried to ran the scrubber again, and the CCCUninstaller and tried again.
    Same error message occured.
    After that I tried to look for the KB2565063 file again. Found it this time and ran the vcredist_x64 file.
    I rebooted the system, tried to run the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file again.
    Same error message ocuured.
    So, after that, I followed the steps you proposed.
    Step 2 - searching for hpoins*.dat --> no results found.
    Step 3 - searching for hpwins*.dat --> no results found.
    Step 4 - I ran the Run Dialog box and typed MSIEXEC /REGSERVER (with AND without the extra space between ('MSIEXEC /REGSERVER') in the Dialog Box and pressed Ok. 
    Got an error message in Dutch:
    'Kan het bestand MSIEXEC /REGSERVER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
    Translation: 'Can't find the file MSIEXEC /REGSERVER. Check if you typed the name correctly and try again'.
    Step 5 - I ran the Run Dialog box and typed MSIEXEC /UNREGISTER (with AND without the extra space between ('MSIEXEC /UNREGISTER') in the Dialog Box and pressed Ok. 
    Got an error message in Dutch:
    'Kan het bestand MSIEXEC /UNREGISTER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
    Translation: 'Can't find the file MSIEXEC /UNREGISTER. Check if you typed the name correctly and try again'.
    So... conclusion: NOTHING worked.
    My ideas for a possible solution didn't work, and neither did your ideas for a possible solution.
    Reason why I want it to work is because of the HP Solution Center. If I can not install it with the software from the original installation disk, or the software that one can download from the HP site (the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file that is), than I have no HP Solution Center. That would be a pity, for I am sure my daughter would really love the use and ease of the program, and would really use it a lot for her study.
    What's next? What else can I try to solve the problem?
    Got any more idea's or helpful hints?
    Thanks in advance,

  • PC Suite 7.1.40.6 won't install on Windows 7 64-bi...

    PC Suite 7.1.40.6 won't install on Windows 7 64-bit
    Massage : Installation operation failed.
    The Installation source for this product is not available. Verify that the source exists and that you can access it.

    Please uninstall Pcsuite if you have already.
    1. Uninstall PC Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove
    2. Run new PC Suite cleaner.
    3. Install latest Pc Suite.
    Download latest Pcsuite from website and try : http://europe.nokia.com/support/download-software/​nokia-pc-suite
    or you can try to install Nokia Ovisuite and continue your work. You can download from here: http://europe.nokia.com/support/download-software/ nokia-ovi-suite
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Indesign CS6 won't install on Windows 7 64bit via GPO

    Good afternoon,
    I created a installation of Indesign CS6 with application manager enterprise 3 to deploy to computers via the active directory.
    It installs correctly without issue to Windows XP x86 machines however won't install to Windows 7 x64 machines.
    When the computers starts it trys to install but fails and proceeds to the login screen.  The following information is left in the Windows event log.
    Has anyone else had this problem and more importantly know how to solve it?
    Log Name:      System
    Source:        Microsoft-Windows-GroupPolicy
    Date:          13/08/2013 9:44:23 AM
    Event ID:      1085
    Task Category: None
    Level:         Warning
    Keywords:     
    User:          SYSTEM
    Computer:      WIN7TEST
    Description:
    Windows failed to apply the Software Installation settings. Software Installation settings might have its own log file. Please click on the "More information" link.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
        <EventID>1085</EventID>
        <Version>0</Version>
        <Level>3</Level>
        <Task>0</Task>
        <Opcode>1</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2013-08-12T23:44:23.375831000Z" />
        <EventRecordID>9482</EventRecordID>
        <Correlation ActivityID="{B74A3709-81F6-4B73-AA1F-9B610874B7EA}" />
        <Execution ProcessID="384" ThreadID="1324" />
        <Channel>System</Channel>
        <Computer>WIN7TEST</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="SupportInfo1">1</Data>
        <Data Name="SupportInfo2">3961</Data>
        <Data Name="ProcessingMode">1</Data>
        <Data Name="ProcessingTimeInMilliseconds">41590</Data>
        <Data Name="ErrorCode">1603</Data>
        <Data Name="ErrorDescription">Fatal error during installation. </Data>
        <Data Name="DCName">\\AYR.burdekin.qld.gov.au</Data>
        <Data Name="ExtensionName">Software Installation</Data>
        <Data Name="ExtensionId">{c6dc5466-785a-11d2-84d0-00c04fb169f7}</Data>
      </EventData>
    </Event>
    Log Name:      System
    Source:        Application Management Group Policy
    Date:          13/08/2013 9:44:23 AM
    Event ID:      108
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          SYSTEM
    Computer:      WIN7TEST
    Description:
    Failed to apply changes to software installation settings.  Software changes could not be applied.  A previous log entry with details should exist.  The error was : %%1603
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Management Group Policy" />
        <EventID Qualifiers="0">108</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-08-12T23:44:23.000000000Z" />
        <EventRecordID>9481</EventRecordID>
        <Channel>System</Channel>
        <Computer>WIN7TEST</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data>Software changes could not be applied.  A previous log entry with details should exist.</Data>
        <Data>1603</Data>
      </EventData>
    </Event>
    Log Name:      System
    Source:        Application Management Group Policy
    Date:          13/08/2013 9:44:23 AM
    Event ID:      102
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          SYSTEM
    Computer:      WIN7TEST
    Description:
    The install of application Adobe InDesign CS6 from policy Global-Application-Adobe InDesign failed.  The error was : %%1603
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Management Group Policy" />
        <EventID Qualifiers="0">102</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-08-12T23:44:23.000000000Z" />
        <EventRecordID>9479</EventRecordID>
        <Channel>System</Channel>
        <Computer>WIN7TEST</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data>Adobe InDesign CS6</Data>
        <Data>Global-Application-Adobe InDesign</Data>
        <Data>1603</Data>
      </EventData>
    </Event>

    Hi Abhijit,
    I am able to install InDesign CS6 manually on the machines from the CD/DVD however when trying to install it via GPO or running the msi using the msi exec commands it doesn't install and leaves the above errors in the event log.
    The installation was made using the same CD/DVD and the installation works on the Windows XP clients and software other than InDesign CS6 will install to the Win 7 64-bit machines via GPO.
    Cheers,

  • RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."

    Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
    a fresh win 8.1 enterprise install on a Hyper-V VM.
    I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
    event log says:
    Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
    "C:\RSAT Windows8.1-KB2693643-x64.msu" ")
    CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14

    As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
    You can also re-try downloading the files to see if your original download was just corrupt.
    Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
    It was a permissions issue! Thanks so much Bruce!
    I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
    1) double clicked the installer.
    2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
    3) Installation was successful.
    Not really sure why this happened as it doesn't make sense but it's working now :-)

  • Flash player won't install in windows 7

    Flash player won't install in windows 7
    This is what I get when trying to use "FLASH PLAYER HELP", as you can see, my flash player and OS are NOT listed and when asked on left side of screen if "THIS WAS HELPFUL", I clicked NO and could not complete my response.
    HOW DO I FIX THIS??? THERE ARE SEVERAL ITEMS THAT REQUIRE FLASH PLAYER & I CANNOT GET IT TO WORK. AFTER DOWNLOADING (AT LEAST4 TIMES) IT SAYS EVERYTIME "INSTALLATION SUCCESSFUL"

    Download the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header and save it to disk, then close all browser windows and run the downloaded installer.
    If you still have problems, please post the contents of the FlashInstall.log file in
    C:\Windows\system32\Macromed\Flash
    C:\Windows\syswow64\Macromed\Flash
    [topic moved to Flash Player forum]

  • CF 7.02 won't install ond Windows Server Enterprise 2003, Service Pack 1, IIS 6.0

    CF 7.02 won't install on Windows Server Enterprise 2003,
    Service Pack 1, IIS 6.0. When I run the Administrator the message
    indicates that MX has been installed but when I open the page with
    the web browser the message is Service Unavailable.

    I get the message when I open try to load ColdFusion
    Administrator page or the index page on the cold fusion web site
    that I am installing.

  • "Add-On Software" CD for LV6.1 won't install.

    Following NI Forums Knight Dan Knutson's advice to install a LV version earlier than 8.5 in order to convert 40 VIs written in LV5.1 to LV8.5.1, I attempted to install LabVIEW 6.1. There is a CD that won't install. It is the "Add-On Software" LV6.1 CD. The CD does not autoinstall when it's put in the CD drive. When I right-click the Autorun > Install icon, the installer returns, "Error. Installation failed." The CD has LabVIEW, and Measurement Studio folders, an autorun setup information file and and Eagle icon. There is no setup.exe on the installation CD main directory. Could anyone please suggest how to install the LabVIEW and Measurement Studio folders?
    I tried to go into the individual sub-folders of the "Add-On Software" CD, but when I reached LabVIEW\Enterprise\SPC\Install\disk1\ and click Setup.exe, I get "Setup Installation Error. Setup has detected that UnInstallShield is in use. Please close UnInstallShield and restart Setup. Error 432." Running MSCONFIG to remove isUninst.exe from the Startup folder fails because no IsUninst.exe application runs on startup, rebooting does not help, it's not an Administrator issue because my account already has Administrator privileges, and searching the Internet does not give useful clues.
    Could an expert please solve either of these two problems?
    Thanks,
    BenCh01

    Hello All,
    I may be confused on the topic of a Compact RIO integrated with LabVIEW version 5.1? Version 5.1 pre-dates the release of Compact RIO hardware. The Compact RIO platform uses neither NI-DAQmx, nor the Traditional NI-DAQ driver, it is built on a separate driver platform in NI-RIO. May I inquire as to why version 8.5.1 was selected for the upgrade process, and not the latest version in 2009 SP1? 
    As you may have experienced already, the process of upgrading across 10 releases of the LabVIEW development environment may present issues, as the environment has been significantly changed through the years. For additional information on the upgrade process please see the following information:
    How to Upgrade or Revert a VI to a Different Version of LabVIEW
    http://zone.ni.com/devzone/cda/tut/p/id/8387
    Upgrading to the Latest Version of LabVIEW
    http://zone.ni.com/devzone/cda/tut/p/id/7417
    More realistically, does this application contain highly customized code, or functions, that are not integrated into the newer platform? With regard to hardware integration, if you intend on working with the Compact RIO platform, you will be working to develop brand new code using the LabVIEW Real-Time (and possibly LabVIEW FPGA) Module, as any code written in LabVIEW 5.1 will not support the Compact RIO platform. With respect to any additional hardware that may have been used, you will need to verify the device support in either the NI-DAQmx or Traditional DAQ releases, this information can be found at http://www.ni.com/support. I believe time spent developing on a supported platform, for the new hardware set, may be more effective than looking to directly upgrade the 5.1 code.
    Please post any additional questions you may have. 
    Patrick Corcoran
    Application Engineering Specialist | Control
    National Instruments

  • Photosmart B110a HP software won't install on windows 7 starter

    I have a Photosmart B110a 3 year old wireless printer that is working on my home pc running windows 7 professional, but after buying a new notebook running windows 7 starter I can not install the HP software either from the install cd that came with the printer or by downloading the software from the HP website!
    I have done a fresh install of windows 7 starter & have switched off antivirus & firewall but I still can't install HP software to install the printer.
    (I was told I would have to pay £18 for technical support to get YOUR software to work my notebook, I don't see why I need to pay money for something that is clearly an issue with YOUR software?)
    I don't have any problems installing any other software for any other software provider on my notebook either from the discs or by downloading, so the issue is isolated to just YOUR software!
    When I try and left click on the setup exe logo when the disk spins up the cd window disappears and nothing happens, no software in installed! Tried copying the contents to my notebook and try to manually install but that does not work either!
    Downloading the software from HP website results in the software unzipping/unpacking but then nothing happens, install window disappears! Yes I have switched off & even tried uninstalling my antivirus & firewall without any success! HELP!!!!!!

    Have you already tried running the install wizard?  This will help resolve some potential problems. 
    Install Wizard
    I am an HP employee.

  • My Macbook Pro downloads software updates but it won't install them?

    My late 2011 MacbookPro downloads software updates but when I try to install them, it tells me that it's not supported? The software is currently OS X Lion 10.7.5 and I tried upgrading a few things but it won't install. For example, I tried to get the latest update for iMovie, which is crucial for my studies,  but it just tells me to update my macbook which is driving me nuts!  Help please?

    You would need to upgrade to Mavericks to upgrade iMovie to the version now on the App Store.
    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • Driver software for Photosmart 7525

    Keep getting a message "The wizard has detected a problem with the driver software for the selected printer"I have restarted and re-installed but cannot seem to get the drivers to properly install so i can set up the printer. Please help.

    Hi , Welcome to the HP Forums! I see that you are having trouble installing your HP Photosmart 7525 on Windows 8.1. I am happy to help!  Please try the following steps:  Uninstall the software. Uninstalling the Printer Software. (Only if the software was previously installed or partially installed. Otherwise, carry on with the rest.)Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Windows Firewall from start to finish.Create a new user account. Managing User Accounts and Logins (Windows 8).Reinstall using the HP Printer Install Wizard for Windows. Hope this resolves your issue!  “Please click the Thumbs up icon below to thank me for responding.”

  • Software and drivers won't install on windows 8.1!!

    I have a new computer running windows 8.1.  After downloading the printer software for my all in one C4580, the files extract but then nothing happens.  I've run the scan doctor and the install wizard and the same thing happens with those downloads.  Hence, I have no way to install the software.  In task manager the setup.exe is running and using alot of CPU's and so I ended the task.  Went through the download and all the "fixes" and still with no luck.  I've tried connecting my printer with the USB cable to see if that might help.  It didn't. Please, I need help!

    Hello ithacagoddess
    Welcome to the HP Forums!
    I understand the software will not run once it extracts. I will do my best to assist you! I am going to provide numerous suggestions that could assist you.
    Please complete all of your Windows Updates. Doing this could install, or repair, what is necessary to resolve the issue. Use these steps when installing your updates:
    1. Open "Windows Update" in Control Panel.
    2. Click "Settings", and then click "Install optional updates".
    3. Next, click "Check for updates".
    Next, I will have you install the latest redistributable package. This is the latest version and should be installed. This is very crucial towards the success of the installation. Please download and install if from this link: Visual C++ Redistributable Packages for Visual Studio 2013
    There have been certain .dat files that have been known to cause this issue. They are HPOIN*.DAT and HPWINS*.DAT. Deleting whatever of these files exist could resolve the issue. To do this, go to the Charms Bar, then search and %WINDIR% and hit Enter. Once the %WINDIR% window is open, look for any files that state with HPOIN or HPWINS and delete them.
    If you have McAfee Live Safe installed, this program might be causing the issue. This software directly interferes with our printer software. Disabling the entire program should be done. The Spyware Realtime Scanner is the particular function that causes these issues.
    In addition to disabling that program, you can perform a clean boot to disable everything else that might cause an issue. Here are some instructions on how to do this: Performing a Clean Boot in Windows
    At this point, I would try reinstalling the printer software. Please use the Printer Install Wizard when installing the software: HP Printer Install Wizard for Windows
    Please respond to this post after you try everything! I do have additional troubleshooting to suggest if this fails. Thanks for choosing the HP Forums. Have a great day!
    Mario
    I worked on behalf of HP.

Maybe you are looking for

  • Inconsistant alpha channel import on .mov files

    I am creating a movie using animation I create in Maya which is then composed in Shake with some alpha masks and exported using the animation codec to a .mov file into Motion. In reviewing my workflow (I'm about midway through things) I recognized I

  • Calling external URL defined by Transaction launcher

    Hi Experts   I'm calling the external URL customized through Transaction launcer using the below code when the button is clicked    lv_navigation = cl_crm_ui_navigation_service=>get_instance( me ).    lv_navigation->navigate( iv_link_id = 'ZTL_TEST'

  • Jumping pages in InDesign CS 5.5?

    Working in InDesign CS 5.5 with a 12 or 16 pages tabloid newsletter. Very often when I click  for instance in a menu choice or Enter for implementing a change or new stuff, the pages jump uppwards very fast and I end up at page 3 or so without the ch

  • I can't complete installation of Adobe Photoshop 11

    I have been trying to install Adobe Photoshop Elements 11 & Premiere Elements 11 for several days with no success. My Photoshop installation is not completed & I can't seem to complete it. When I ask for help I get answers that are irrevelant. I foun

  • Can any backup do this?

    I've bought a 320GB hard drive for my MacBook Pro. I'd like to do a clean install on the drive. But I'd also like to restore from a backup all the applications and preferences that did not come with the operating system. Is this pie-in-the-sky dreami