Air Bubble on my 5s Screen

Guys help after i romove my screen protector on my iphone
i notice that there is a air bubble on my iphone screen on top
left. Its been irritatating. What will I Do??? Help plss

I Know what the problem is, the same thing happened to my iPhone.
The bubble is just from heat, which means that your iPhone basically melted underneath the top glass layer. This happens to many iPhones, and iPods. The bubble  will usually form in the corners, or, around the edge.
If you have Apple Care, bring it into Apple and you will either receive a new iPhone for free, or, you will receive a new iPhone for a low price. 
If you don't have Apple Care, the bubble will not effect the way your iPhone works in ANY way.  You can just wait until your phone contract ends, then trade in your old iPhone for your new iPhone, and Apple will still take your iPhone.
I hope that helped!!!

Similar Messages

  • Clear screen protector application - air bubble removal

    I have bought many clear screen protectors and often have had issues trying to get the air bubbles out from the screen protectors. Sometimes, dust is underneath the protect and when I try to clean it out using the cloth included with the protector, it gets even more dust and then the protector becomes useless. Is there any recommendations on how to best avoid getting air bubbles underneath your screen protector?

    I just received and installed the Incipio Feather case on my iPhone 4. I had it on my 3G and liked it as it is a very slim, unobtrusive case and is like a hard plastic core with a matte, slightly rubbery, velvety surface. I had installed Zagg first, but was displeased with the orange peel surface on the front. I left the Zagg on the back as I do feel it will offer good protection from the back and removed it from the front. The case fit with no problems. The incipio feather comes with 2 hard clear screen protectors with a hole for the front camera, and the front protectors are MUCH better than having the rubbery, lumpy Zagg on the front screen and don't require any liquid to apply. I was hoping I would get one crystal screen protector and one matte protector as I did when I used Power Support screens in the past, but they are both clear. The surface is smooth and nice. I don't have any loss of signal now when I hold the phone in my palm cupping the lower left side. I probably slightly prefer the matte power support screen as it is easier to keep clean, but power support is not shipping yet. If I had to do it over again I would skip the Zagg and just get the incipio. Just my 2 cents and thought I'd share my experience.
    http://www.myincipio.com/product/IPHONE4IPH-512/Matte-Black-Ultra-Light-featherÂ-Slim-Form-Fitted-Case-for-iPhone-4.html

  • How do i  remove the air bubble and dust inside the screen?

    i use the shield on my IPAD, and didnot wait 24 hours. so that's why there has a lot air bubble and dust inside the screen when i remove the shield.
    How do i remove these air bubble and dust inside the screen of my IPAD?

    I do not understand what you are seeing. Can you post a screen shot?

  • If I don't have a warranty and my iphone 5c screen has an air bubble will they fix it ?

    If I don't have a warranty and my iphone 5c screen has an air bubble will they fix it ?

    Why would your iPhone 5C not have a warranty? Has it sustained physical damage?

  • After cleaning screen with iKlear, air bubbles appeared...

    The other night I cleaned my macbook's screen with iKlear solution. After I cleaned it I noticed about 20 very small air bubbles that had formed on the screen. When you rub the iKlear cleaning cloth over the screen you can distinctly hear the sound that air bubbles make when you move something over them...I know for a fact that this is not dirt/saliva on the screen.
    This isn't a huge problem for me but these bubbles are noticable at certain angles which gets annoying.
    Anyone have the same problem or have sugestions on how I can fix this problem?
    Thanks!
    -Isaac

    The bubble's disapeared somehow...still not sure what happened

  • Air Bubbles Inside Screen?

    Hi, I've had my 3Gs for about a year now and around December of 2010 it started a small bubble developed on the left side of the screen.. I paid it no mind as it was very minor and I'm expecting to get the next iPhone when it is released.
    However, the air bubble has grown tremendously and just looks atrocious. And to make matters worse, a second air bubble on the right side of the screen is developing at an even faster rate.
    My question is, will I be able to visit the Genius Bar and get this fixed/replaced? Or am I just out of luck?
    I'm at work now, I'll post pics sometime tomorrow after I get off in the AM..
    Thanks a million!

    Have you ever had a rock hit the windshield of your car and leave a little nick in it (not a crack, just a little divot where a tiny piece of the glass has chipped away? That's what I mean by a chip. A nick. A piece of the glass that has been broken from the surface of the display.
    As has already been stated, if it was a manufacturing defect, it would have been there since day 1. Since you said it appeared later, that means the glass came in contact with something hard enough to take a piece out of it.

  • Air Bubble behind screen?

    Recently purchased a brand new 2010 15" MBP (default screen) and just noticed that there's what appears to be a air bubble (slight oil bubble resemblance) between the gloss and LCD that varies in size from max the size of a dime to just a few mm. If I 'gently' apply pressure with the apple cloth over the spot the bubble follows for an inch or two before returning to the same spot. I read in other forums that gently rubbing in small circles around the area will make it disappear. If I gently apply pressure on the back of the screen in the same area the air bubble disappears completely. However it keeps coming back after a few hours whenever I flip open/close my lid. It causes some screen distortions during the blue startup screen but otherwise I only notice it when the monitor is turned off.
    Anybody else experience this before? or whether this should be cause for alarm?

    I took a quick pic with my iphone, it looks like a mirror but the air bubble area is the distortion above the aerosol can.
    http://farm6.static.flickr.com/5173/54878898273e30ba79f0z.jpg
    MBP was purchased in Hong Kong at premium authorized reseller about 3 weeks ago. I'm not near any official Apple Stores but if I return to Canada in June and I will still be under 1 year warranty will they service it? Does anybody know?
    Thanks

  • Air bubble underneith my screen?

    I have the BlackBerry Curve 9300, and I have had it since November 2010. I just noticed about a half hour ago that there is an air bubble underneith my screen. Its right in the middle of my screen and when I press/push on it, it moves all over the screen and spreads out but then goes right back to the middle of my screen when I stop pressing on my screen, its like a thin oblong bubble but when I press my screen it moves to any shape. Also, my screen is extremely sensitive now, when my finger slightly touches my screen, it makes the look and colours when you inteensly touch your screen, like goes black where you press and stuff. What is this? Why is it happening all of a sudden and what do I do?

    I Know what the problem is, the same thing happened to my iPhone.
    The bubble is just from heat, which means that your iPhone basically melted underneath the top glass layer. This happens to many iPhones, and iPods. The bubble  will usually form in the corners, or, around the edge.
    If you have Apple Care, bring it into Apple and you will either receive a new iPhone for free, or, you will receive a new iPhone for a low price. 
    If you don't have Apple Care, the bubble will not effect the way your iPhone works in ANY way.  You can just wait until your phone contract ends, then trade in your old iPhone for your new iPhone, and Apple will still take your iPhone.
    I hope that helped!!!

  • How do you remove air bubbles inside the screen?

    A little bubble appeared on my screen, whats the reason this happend? how to remove this then?

    Have you ever had a rock hit the windshield of your car and leave a little nick in it (not a crack, just a little divot where a tiny piece of the glass has chipped away? That's what I mean by a chip. A nick. A piece of the glass that has been broken from the surface of the display.
    As has already been stated, if it was a manufacturing defect, it would have been there since day 1. Since you said it appeared later, that means the glass came in contact with something hard enough to take a piece out of it.

  • I took off my screen protector, and it left bubbles in the actual screen! How do I get rid of them?

    I put on the screen protector and noticed it had some bubbles so I peeled it back to fix it. Well, what I though was an air bubbles in the protector, was a bubble in the screen!! This WAS NOT there before. How do I get rid of the bubble that is in the iphone?
    Thanks!

    zinkiew,
    Why don't you go to the "Screen Protector Mfg" web site and see what they say about removing the residue mark. Most all S. P. sites have a section on how to clean the screen when you take the protector off.
    That said have you tried a damp soft cloth?
    You can also try a piece of "Scotch Tape"... press the sticky side of the tape on the bubble mark and then lift it off. You may have to do it several times to get it all.
    Their may be some solvents like alcohol that will remove the mark if it is glue residue from the protector. But make sure you check with Apple before you use any solvents. Some solvents may attack the Oleophobic coating on the iPhone screen.
    You can also Google for a solution to your problem. I have seen several "How to" articles to deal with the issue you are having.
    Just so you don't do something to make things worse I will repeat my caveat - Check with Apple before you use anything but a damp soft cloth.

  • Air bubbles under glass display

    Hello,
    this morning I spotted air bubbles under the display and even under the "white space" of my almost new (about one month old) Iphone 4 (16gb).
    I think I didn't notice these bubbles because until this morning I kept the original plastic screen on the display.
    Now I tried to contact apple support but when I type my serial number here: http://www.apple.com/support/iphone/contact/
    it won't show me anything.

    I also have the same problem - but on an iphone 3GS. Am assuming the only way air can get in is during manufacture?
    Out of warrenty. Anything I can do? Have seen posts saying if you ignore it it gets worse, but don't see why I should have to pay to rectify something that was created during manufacture

  • Bubbles appearing under my screen

    I have recently had 3 bubbles appear on my screen. They look like little air pockets that you can't feel or anything. They don't affect the use of my phone but they can be pretty annoying. Is there anything I can do to get this fixed? Will Apple give me another phone as a replacement?

    Contact Apple. They will most likely replace it.
    1-800-MY-IPHONE
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes:MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • Air bubbles in display W700

    A few weeks ago I noticed what I thought was a pixel-related artifact, but on closer inspection it looked more like a chip. As I don't often use the tablet display - I usually rely on the HDMI out to a large monitor - I have no idea how long this has been present. Additionally it is is positioned in the lower right corner above the Windows system tray. Further investigation - prompted by the appearance of what appears to be an air bubble in the upper right area of the tablet - reveals that the original artifact is also an air bubble. I've achieved some manipulation of its shape to confirm this. Has anyone else come across his problem? Does anyone have a solution, or do I need to return my tablet? Thanks,Christian

    I have the same problem, have contacted Acer about this due to mine being out of warranty and they advised I would have to pay to get the tablet delivered to acer, they would then quote me for replacement and then I would to decide if I wanted the item fixed.
    The bubbles on the screen move about and differ in size constantly, for such an expensive item it is quite annoying.
    And now it seems like I'm not alone with this fault, surely Acer should do a recall?!?
    A replacement digitiser screen through amazon is about £57, I would attempt it myself but am not confident enough to remove the org digitiser layer.. Anyone attempted that?

  • Air bubble under scre

    On the screen protector that came with the Zen Vision: M, there is an air bubble in the top right corner of the screen, and it looks like dust is underneath. Since it is right at the corner, is it possible to partially remove the screen to fix it, and then put the screen back on, or will it lose it's stickiness? I want to leave the screen protector on because I don't have a case or anything to protect it.

    bestskinsever.com just bought this for my ZVM and it will protect the face?of the ZVM. Skin+shipping and handling is under $9.00. and you will never have to worry again. The protector that comes with the ZVM is nice for the screen but you need to keep the rest of it protected from those hairline scratches and this will do the job.

  • Mac air 2010 model just had screen replaced but its dead, no display nothing. the thunderbolt port works fine, this is how I'm asking my question i.e.; on the mac air, if anyone can help get this new screen

    hi
    im a newby to this but i really need help fixing my macbook air a1369 2010 model display screen, i have replaced all new but its just dead a black screen with no power getting to it at all even the backlit led is dead so the inverter isnt getting power to it either. everything works perfectly through another monitor hoocked into the thunderbolt port, its just theres no power going into the built in display.
    i would really appreciate some pointers as to whether theres any fuses that i could change or any pointers on getting the display to work at all. thank you for taking the time to read this and hope you can help a newby get back up & running.

    Confused, if you just had screen replaced was it working when you picked it up? I'd call whoever fixed it and report it ASAP.

Maybe you are looking for

  • When opening new tabs they are blank;how can i make them open to my homepage?

    When you open a new tab it is blank. Is there any way to make a new tab open to my homepage? == This happened == Every time Firefox opened == always

  • Getting compile error when i reference flashx module

    I am building an ioS/Android app in Flash Builder 4.7. I am using the TLF classes to do some advanced text handling. so import :           import flashx.textLayout.elements.TextFlow;           import flashx.textLayout.formats.TextLayoutFormat; howeve

  • Adobe Print Form: Printing Nested Internal Tables

    Hi All, We are developing an Adobe print form We are getting data in 3 internal tables (say ITAB1, ITAB2, ITAB3) Now we need to print the data as follows (data can overflow into multiple pages) Record of ITAB1.........    Record of ITAB2    Record of

  • Nokai E75 VOIP/SIP Setup for WLAN: sipgate.de - ...

    Had problems setting up the VOIP Client on my E75 for the SIP Provider sipgate.de: Test calls to their 10005 or 10000 number worked without problems, but for outgoing calls to normal landline numbers no audio stream was connected through (ringback wa

  • How can i find 8451 & I2C example code.(Labview 7.1)

    How can i find 8451 & I2C example code.(Labview 7.1) ! will have to commuicate Data Read and Write (USB-8451 &  I2C(ST24C16) direct connection status) I want to Detail text and VI Example. Thank you. [ps] [email protected]