Air Flex with work problem in swfLoader...
Hello,
I have a problem with swfLoader in Air Flex. I create a swf flash that must be loaded into Air application. When I run it insde of Flex Builder, all is ok. But when I install it, the embed flash dont work in component "InputText" and the TextField (in mode "InputText")... Simply I cant click in this and keyboarding... The problem dont is in SandBox...
Thanks,
Jonathan
Due to some reason the text input fields used inside the flash presentation are not editable only when the application is running on installed AIR.
When the flash presentation is loaded in Flex it is not allowing the user click inside or edit the text input, to over come this we are setting the focus to text input field when ever the user clicks on it so that the cursor focus is set inside the text input field and user will be able to enter data.
Below is the code change implemented in flash.
inputText.addEventListener(MouseEvent.MOUSE_DOWN, setFoucusToTextInput);
function setFoucusToTextInput (e:MouseEvent)
stage.focus = inputText;
Similar Messages
-
Hi, My english its not perfect but i'll try to explain my situation. I bought an iPad air with a problem in the monitor, yellow stains in the border with black screen and i went to an official apple repair in Portugal and they sent me for the third time an iPad with the same problem and with more problems like white graphics lines in the animation horizontal/vertical switch sides of the iPad view. At the fourth iPad that was sent with the same problem, Apple refused to replace for another iPad and said to me that was not their problem anymore and now I'm going to sue the company because nobody in Portugal can solve this situation in the costumer line. Im very sad with that, but i'm going till the end. I BOUGHT an iPad with FABRICATION PROBLEM and you guys don't care about to fix it. Thanks.
What should i do more??crusherPT wrote:
Ok, but i can't find the email of apple ireland. Someone have it?? i can't make a phone call to their line because it's not free from Portugal.
Apple doesn't do support by email. All the contact information that is available can be found by using the Contact Us link at the bottom right of every page.
If the call is not free, you may need to pay to call them. -
Air,Flex ,Cold Fusion There is a problem with P4990 Release of AIR Updater
using Air/Flex/cf I am not able to connect to my Cold Fusion
component after running the P4990 UPdate this morning, It worked
fine on both an XP and Vista Machine running P4880 , but now even
after a restart my simple connection to the cfcomponent is hanging
and will not run.
this worked fine in the release I was running this morning,
runs fine in a browser just not after patching ?
two questions ,
where can I download the P4880 Release Again
and is this a bug or a change ? ,
if its a change what is the new way of connecting.
RayI read through the notes and iI even recreated my air file,
but it is still hanging , here is the html for the connection
to the app as well as the flex remote connection I am using, it all
works in the browser, but again just hangs in air after this update
<cfoutput>
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="
http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab"
name="VPR_Users" width="1003" height="650" align="middle"
id="VPR_Users">
<param name="movie"
value="/VS/Modules/Administration/plugins/users/ui/screens/VPR_Users.swf?u=#Application.V iper.userID#"
/>
<param name="quality" value="high" />
<param name="bgcolor" value="##869ca7" />
<param name="allowScriptAccess" value="always" />
<embed
src="/VS/Modules/Administration/plugins/users/ui/screens/VPR_Users.swf?u=#Application.Vip er.userID#"
quality="high" bgcolor="##869ca7"
width="1003" height="650" name="VPR_Users" align="middle"
play="true"
loop="false"
quality="high"
allowScriptAccess="always"
type="application/x-shockwave-flash"
pluginspage="
http://www.adobe.com/go/getflashplayer">
</embed>
</object>
</cfoutput>
FLEX CONNECTION CODE (flexgateway is my cfc)
<mx:RemoteObject id="VIPER" destination="ColdFusion"
source="VS.bin.engine.flexgateway" showBusyCursor="true">
<mx:method name="setUserInfo"
result="setUserInfoResult(event)"
fault="Alert.show(event.fault.message)"/>
</mx:RemoteObject>
the function that runs and hangs
private function init():void{
pUserID = Application.application.parameters.u;
VIPER.setUserInfo(pUserID);
the variable is entering into flex fine, the flex application
is loading into the air harness fine but when I run the page ,
it hangs like it is not even connecting. -
Hi ,
I am new in flex.
Actually i make a flex with php desktop application. There are two problems which i am not getting:
a.) I make three module which i load on tab navigator click . These mudules working fine . But when i make this project export relese build to make .exe file . These modules not added in installation file.
i.e after installation i have to copy these modules .swf file in program files where the application installed. So i want to know is there is any method so that module added in the .exe file so that they by default goes at the
time of installation of exe.
b.) I use php services in this project and when i insatlled the application to system its not working untill i add the the project service php file and zend frame work folder on user wamp . Is there any method that all these happen by default at the time of insatllation.Hi,
AIR is best suited to be a client application.
P.S: Since you are using PHP, you may want to take a look at
amfphp so that you can use AMF to speed up data transfer between
your AIR app and the PHP server. -
I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
AIR application with Flex 4.5 will not render content. What gives?
OK,
So I've upgraded to Flash Builder 4.5 Premium and I am unable to develop desktop AIR applications with the 4.5 Flex SDK. I start by simply creating a brand new AIR application using the default SDK (Flex 4.5). I set the title property on WindowedApplication and include a simple Label component. The project compiles fine but when I run the application all I see is the adl window in the dock but that's it. If I modify the Main-app.xml file to set the visible attribute to true, I will get a small window but there is no content although the output window shows the application swf being loaded. Checking the release version of the Main-app.xml file shows the correct path location to the swf.
Here is what I've tried so far:
Install/reinstall Flash Builder, 4+ times
Downloaded the trial installation twice
Downloaded the SDK's for 3.6, 4.1 and 4.5.0. I then copied each SDK folder and merged the AIR 2.6 SDK with each copy. So now I have 6 SDK versions; one pristine and the other with the AIR 2.6 SDK merged. I then added each SDK individually and created an AIR desktop application for each. Each and every one works fine with the exception of the two 4.5 SDK's. They will not render content.
I created a simple creation complete handler for the application that declares a simple variable and assigns a value to it. I then put a break point on the assignment and it never gets caught. More evidence that the swf isn't getting loaded.
The computer I'm running on is a Mac Book Pro with Snow Leopard 10.6.7. If I create a web project in each of the 6 SDK's, those will work just fine. What the heck is it with Flex 4.5 and the AIR 2.6 SDK on this machine? I have the AIR 2.6 runtime installed as well as a number of AIR applications that work just fine. I also tried my 4.5 test on my windows machine and that worked like a champ.
I am completely out of ideas. Finding information has been difficult because everyone is all about mobile so searching for desktop issues is a losing battle. I realize this is a long email but I'm desperate for help. There must be someone out there that knows more about the low level interaction between Flex 4.5/AIR 2.6 and the OS.Well, I finally found the issue, a corrupted mm.cfg file in /Library/Application Support/Macromedia. I deleted the file and then adl ran just fine.
-
The headphone jack on my macbook air isn't working. I have plugged in two headphones and both won't work although they do work on other devices. Any ideas on how to resolve this problem?
update to latest OSX 10.9.3
reset SMC , you likely put your Air into sleep mode with phones attached.
update the OSX to fix the issue. -
Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?
Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best. -
My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?
Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano -
My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!
Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread. -
My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?
I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it. -
hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?
Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.
-
After a months of stable work my new IPad suddenly denies to find cell network under any circumstances.Please advice if anyone familiar with that problem?
It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first night.
The speed may have been ok at that time and is too inconsistent/too slow overall. interference may have proven to be more of an issue since as well. If using public DNS that will provide Intermittant results
I'm sure using a hotspot would be fine but it depends on your viewing habits. An HD movie is around 4-5GB. It would also be subject to speed. requirements so best to test to see how it compares.
You would have to check with your Carrier if hotspot it's enabled then just to into your settings and toggle it ON
Maybe you are looking for
-
GX70-3BE - How to output 4k resolution
Hello there, Just got the GX70 3BE notebook with the intention of running 4k resolution on a 4k capable monitor. When I plug in the HDMI into a 4k capable hdmi port, the highest resolution available is still only 1080p. How do I actually output 4k wi
-
I sent my calendar to apple with no problems on this end. Three days later I get an e-mail from Apple telling me my image file was unreadable. I go back into my calendar - which looks awesome - but when I try to save as a PDF and print, it only is gi
-
I have chosen a disc menu for my project. In the main Menu I have a place to "Add Media Here". I would like to add a section of one of my scenes that I have in the time line into the main menu for an introduction. I cannot figure out how to trim the
-
Pages is now at 4.1, but I can't update it.
I have a legitimate copy of iWork '09 that was installed via a disc while I was in 10.6. Now I'm running 10.7.2. I got a pop-up the other day the iWork had an update to 4.1, and looking at the App Store verifies that Pages is at 4.1. But when I cl
-
Hi all! I have following problem: I send an SMS via my iPhone5 to my son. An SMS because Messages on my iPhone5 didn't detect that a message could be sent via iMessage. He gets the SMS message on his iPhone5 and when replying to me he sees that I can