Air Port disconnects

Installed iOS 6. Since doing, Air Port drops off. Get a message "disconnected" when I open it. After a while it comes back. Saw where others have experienced the same thing since installing iOS 6

USB 3 devices can interfere with Wi-Fi and Bluetooth. You may be able to mitigate the problem by using a USB cable with better shielding, or by switching from the 2.4 GHz wireless band to the 5 GHz band.

Similar Messages

  • MacBook not showing external hard drive connected to Air Port Extreme

    I have a MacBook 5.2 running Mac OS X Version 10.5.7. I am running a wireless network Air Port Extreme router Version 7.4.2. I have connected a 1 TB Western Digital 10EAVS External hard drive and a printer to the Air Port Extreme router via a USB 2 hub. My MacBook sees and I am able to utilize the printer, but the Western Digital 1 TB External drive does not show up. I can see the 1 TB External drive via the Air Port Application setup, but it is not showing up on my desktop or in Utilities/Disk Utilities. I have connected the External drive directly to the USB port on my MacBook, and the drive showed up on my desktop instantly. I partitioned the External drive into two partitions and ran Time Machine which successfully backed up my MacBook. I then disconnected the External hard drive from my MacBook and reconnected it to another USB port in the hub connected to the Air Port Extreme. Once again, my MacBook does not see the External hard drive. I can see the External hard drive via the Air Port Extreme application right down to the two individual partitions. I even removed the USB hub and plugged the External hard drive directly into the Air Port Extreme router, but my MacBook still did not see the hard drive. I've restored version 7.4 and 7.4.1 on the Air Port Extreme, but it did not help. Does anyone have any insight what settings might need to be changed on my MacBook to allow it to connect to the External hard drive while it is plugged into the Air Port Extreme wireless router?

    Do you have an older "dome" style AEBS or the rectangular model? The former will not work with TM. Early versions of the former may not work until you enable them to see a TM drive by doing the following:
    Open the Terminal application in your Utilities folder. At the prompt paste the following command and press RETURN:
    defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
    The drive should now be accessible via TM.

  • Air port express not found by my mac

    Hallo all, I want to extend my wlan, therefore I want to install an additional air port. I have already a time capuse with air port. Now my question:
    Do I neet to connect the new air port with a wire? I thougt the connection is wireless? Unitl now the new air port is not found by my mac within the utility air port program. Why? Please help! Thank you, Kailash

    To help facilitate setting up your extended network, I would recommend the following:
    Perforrm a "factory default" reset on the AirPort Express base station.
    Temporarily connect the Express to the Time Capsule using an Ethernet cable between them.
    Once you have configured the extended network, you can now disconnect the Express from the TC and place it at the desired location.

  • How do I get my iPad to recognize Air Port?

    My computer and iPhone use the same air port but the iPad doesn't. What's the cause and how do I get to?
    Frank

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Air Port not working any more

    I routinely connect and disconnect my iBook G4 from my cable modem. With each transition it takes a few seconds for the machine to reconfigure how it is accessing the internet, but then everything is fine.
    Well, for whatever reason I cannot figure out, now when I disconnect my computer I'm unable to aquire a wireless signal.
    I have a Linksys router hooked up, and it is working, but for some reason my Air Port isn't reading it anymore.
    I try checking the network settings, but it still doesn't fix it.
    Can anyone help me?
    Thank you,
    Jon
    PS - Please let me know if there are any other details about my set-up that you need to know to help figure out my problem. Somehow I'm sure this will boil down to "User error", but I just don't know where I'm going wrong. I'm not doing anything different than I have before.

    This will be a funny question, but it's better to ask. After you disconnected your iBook from cable modem, did you plug the ethernet cable to your router? I believed it's also a good practice to completely turn off your cable modem and your router while swapping/plugging the ethernet cable from your modem to your router.
    iBook 1.42GHz   Mac OS X (10.4.5)   Alienware Area51mm

  • Air port problem

    When I connect to internet through air port and every thing
    is fine. After ten minutes later, my air port icon change
    to gray and internet connection is disconnected. But the air
    port setting is shown air port actived. Can you help me
    how to check the air port setting??
    Thanks
    mac book   Mac OS X (10.4.7)  

    I see you're running 10.4.7 - would you consider running software update (select the blue apple in the top menubar, then select software update) and upgrading to 10.4.8, as well as applying any other updates for your MacBook?
    It may resolve the issue. The other possible answer is that your wireless connection is experiencing interference.
    If you have other 2.4GHz devices (portable house phones, microwave) within reasonable distance form your wireless router it may cause interference with your wireless connnectivity.

  • Everytime I set up the Air Port, in settings, it reverts back to Timecapsule.  Help.

    I need help with my new Air Port.  I am trying to back my iMac to it but the Time Capsule keeps taking over.  I want to clear all my pictures off of the computer and keep them on the Air Port.  Any thoughts?

    What OS are you using on the computer.. your profile is Leopard but I doubt it.
    ALavine wrote:
    I need help with my new Air Port.  I am trying to back my iMac to it but the Time Capsule keeps taking over.  I want to clear all my pictures off of the computer and keep them on the Air Port.  Any thoughts?
    What actual airport do you have.. is it a Time Capsule or are you using an External hard disk to an Extreme?
    Are you meaning Time Capsule or Time Machine.. ie the backup software on the Mac? A Time Capsule is hardware and cannot take over anything.
    Putting your pictures on the TC is a bad idea. Especially if the picture are iphoto library. The same consideration should be made to the Extreme with USB drive.. except the drive is not sealed inside the unit.. which is a plus.. on the negative side though is the speed of the USB which is super slow. An Internal disk in the TC is about 4-8 times faster than USB.
    Here is general post about moving live files to the TC.
    Store files on the TC.
    https://discussions.apple.com/message/24380694#24380694
    This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
    The TC is not suitable for network file server.. but many people having no choice press it into service as such.
    It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
    Major issues.
    1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
    2. The TC cannot be partitioned and mixing TM backups and data is not great.
    3. The drive is slow to spin up and quick to spin down.. there is no controls.
    4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
    5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
    6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
    7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
    Read pondini for some work arounds.
    Q3 here. http://pondini.org/TM/Time_Capsule.html

  • Back up iphone to air port utility

    Is it possible to back up iphone 5s ios 8.1.2 to be backed up on air port time capsule, if yes how?

    Is it possible to back up iphone 5s ios 8.1.2 to be backed up on air port time capsule
    Not exactly, since iOS devices back up to either iTunes on your computer or to iCloud....depending on how you have things set up.
    If the iPhone backs up to iTunes.....AND.....you have Time Machine set up to backup your Mac to the Time Capsule, then the iPhone backup data in iTunes is backed up to the Time Capsule.  So, you could say that an iPhone.....or any other iOS device.....can back up indirectly to the Time Capsule.
    If you are asking if the iPhone can back up directly to the Time Capsule.....the answer would be no.
    For more information on iOS backups, please see this Apple support document for all the details:
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support

  • What do I need to connect my new Yamaha RX-V671 receiver wirelessly to my Air Port Express?

    I have just received my new Yamaha RX-V671 receiver and the only connection I have for the internet is by a network cable or by a USB slot.  I would like to hook this up wirelessly to my Air Port Express, I just need to know what I need to get so I can stream my itunes to this receiver.  My receive is roughly about 50 feet from my Air Port Express. 

    but what I was hoping to do is hook up my receiver wirelessly
    Sorry, but if the receiver only has an Ethernet connection or USB...as you say....then you are going to have to use some kind of wireless-to-Ethernet adapter....like the AirPort Express that I suggested....or another similar product to accomplish your goal of providing a network connection to the receiver.
    It would be wireless from your "main" AirPort Express to the second AirPort Express, with a short Ethernet cable from the second Express to the receiver.

  • How can I use my IPAD to stream Musik to two Air Port Clients in a network at the same time?

    I want to stream my musik via I PAD to more than one Air Port Clients at the same time. Via MAC it is possible to select "more speaker". In the I PAD I can only select Station 1 or Station 2.

    I opened Airport Utility today and it appears to have been simplified to the point where you can't do much with it these days.
    Yes, welcome to the Fisher Price toy box utility.. where nothing in the way of advanced usage is offered.
    Is there a way to accomplish what I want to do that is reasonably simple?
    You can put time controls onto the offending addresses.
    But if the hackers know anything at all they know how to access the MAC address of the computer and change it.. so the effectiveness of this is limited.
    Change the current setup and password.. You must use WPA2 Personal and I recommend you use a pure alphanumeric password, mix case and numbers of 20 characters or more for your situation.. do not give that password to anyone.. protect the admin password of the TC itself equally well but with a different password. And protect the physical access to the TC from anyone in your home.. because the fact is all security on the TC is an illusion if the TC has open access.
    See how to find passwords here.
    i forgot my password for my router, how can I change them.
    So anyone can discover your passwords without your knowledge and leave no trace on your system.
    If you make no progress.. I suggest replacement of the TC as the main router of your network.. you need something with controls.. and even better controls that allow you to block people.
    The favourite one now is older Netgear WNDR3800 . .you might need to buy from ebay although a few new ones are still around.. alternatively the WNDRMACv2 is simply the same hardware in a white box.. instead of black.
    Load gargoyle firmware onto it.. sorry if I even point to where you can find this info my post will be deleted.. I can say it.. just cannot help further.. so use google.. there are lots of posts and let me assure you this get combo.
    You can continue to use TC at what it does best.. a dumb wireless AP and location for TM backups.

  • Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet.

    Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks

    I did not say it is not possible.
    I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
    Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
    Maybe you can get on the Internet over Ethernet.
    You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac).

  • Time capsule 1st generation - extension with air port extreme

    My parents use a time capsule (1st generation) as wireless lan device. As they run a boarding house they wish to provide free internet access to all of their guests (in all rooms). Therefore I bought an air port extreme station to extend the network as this product now (finally) includes the option »guest network«.
    The question is the following: *Should I keep the time capsule as basic device connected to the modem and use the air port extreme as extension or do you recommend to set it up vice versa?*
    I checked the range of the time capsule: It can be used in already in the first floor but not in the second anymore.
    I am really unsure how I should approach this topic and I hope more expirienced users can provide some help to this issue. Maybe you can also give me some security advice. In order to protect kids from misusing this new possiblity I was thinking of using opendns to block certain websites. Maybe there are also betters ways of doing this?

    Need a bit more info.
    Now this is what happens when I plug it in:
    Plug it into power?? The main router?? Sorry I am unclear what you are plugging it into.
    It sounds like you have not done the setup.
    The TC should be in bridge and plugged into the current modem router you have.. and powered on full time.
    If you cannot access it via the utility, I strongly suggest you buy the apple usb to ethernet dongle.. which helps air people no end.. or use any other computer that has a real ethernet port.
    Otherwise set to factory and start over. (this will not do anything to what you already have on the disk).
    Hold in reset and power on the TC.. wait about 10sec until the front led rapidly flashes. .then you can connect the computer.. and do the setup.. choose bridge in the Network section of the utility and update the TC.
    Then you can plug it into the main router and access it and internet at the same time.. either by TC wireless or the main modem wireless.
    Please note. .Gen1 TC is only going to last very little time.. it is already well past the average lifespan.. many died at 2years.. most gone by 4years.. plan on storing nothing important on it.

  • While using the computer the wi fi dropped out and it can longer find any networks. I have played around with the air port etc , still have no networks and can't connect to internet. Please help

    Hi I am having Wi fi connectivity issues , while using my computer the wi fi dropped out , I can no longer connect and no networks come up. I have tried looking into the air port, trying manually to connect to the desired network with no success , it says the Wi fi is turned on. I am at a loss to why it will no longer connect, please if you have any suggestions,as I tried to ring apple support but my warranty has expired this is my first major issue since I purchased it in 2009.
    Thanks

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

  • I bought a new router and now my mac can no longer find my air port express

    I recently installed a new Netgear N600 router.  The internet and wireless are working.  I had previously purchased an Airport Express for use simply as Air Tunes and used it with our old router with no problems.  However, since we installed the new router the Air Port utility cannot find the Airport Express.  I have reset the settings on the Airport by pushing the little button.
    I have tried connecting using an ethernet and Airport Utility still cannot find the express.
    Any suggestions or help would be greatly appreciated.  Thanks!

    I would suggest that you start by performing a "factory default" reset on the AirPort Express Base Station (AX). Once completed, you should be able to access the AX via the AirPort Utility. Note: Be sure to first connect to the AX's wireless network BEFORE accessing it with the utility.

  • I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How?

    I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How to reconfigure.
    I ask because I have music running out of both expresses, and the one that is most distant from the time capsule (routed through the first express) regularly drops the music signal from itunes. And I am guessing the serial configuration of the routers has something to do with this, but my root problem is music dropout - any thoughts would be appreciated.

    If you have the the most current model of the Express devices, the default setup is to "extend" the wireless signal.  In this type of setup, each Express communicates directly to the Time Capsule.
    How did you setup the AirPort Express devices?
    What version of the Mac operating system are you using on your MacBook?   Or, do you have AirPort Utility installed on your iPad?

Maybe you are looking for

  • Auto Adjust Brightness late 2010 is gone

    Auto adjust Brightness Button is gone?!? Can you help me getting it back? See  

  • Do I really need KB2757817 on my Windows 2008 R2 SP1 Enterprise KMS?

    I recently added support for Office 2013 to my KMS server. During the installation, I was prompted to install KB2757817 to ensure support for Windows 8 and Server 2012. I checked and found that I'm already activating Windows 8 and Server 2012 on the

  • Can't open Bridge CS6 on start up

    When I start CS6 and go to open Bridge -  CS5 Bridge starts up and not CS6 Bridge . The onley way I can open CS6 Bridge is to go to the task Manager / processes and stop bridge .exe

  • ToolTip for AdvancedDataGrid

    Hello, I would I to ask how to create a tooltip in AdvancedDataGrid. My MXML component is a VBox based component. This is the code for my custome ToolTip using Panel: <fx:Script>    <![CDATA[     import mx.controls.Alert;     import mx.events.FlexEve

  • How does TestStand interpret the /T character in csv file

    I have the following entry in a TestStand 4.0.1 csv file.  PET_PAELOG_Path,C:\Program Files\TrippLite\PowerAlert\data\paelog.txt The \T is being interpreted as a tab character when read in with a property loader step type.  The file format is set to