Airdrop not working on MacBook Pro 15-inch, Mid 2009

i recently updated the Yosemite OS on my MacBook Pro (15-inch, Mid 2009), but i could use the Airdrop anymore even from computer to computer and computer to iPhone. May i know is there a reason and how shall i rectify this problem ? I had try to redownload the Yosemite OS but it appear the same issue after the troubleshoot.

From Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
Your 2009 MBP is not compatible with AirDrop to an iPhone

Similar Messages

  • I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).

    I need to know which update(s) I can apply to help stabalize the system.

    Typing the body of the thread message in the title, huh? -)
    I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).
    Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
    Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out.  --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
    You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
    I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    http://www.apple.com/support/bootcamp/
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Boot Camp 5.0 Drivers
    http://support.apple.com/kb/DL1638
    Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/
    Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
    Yes, you can download the Boot Camp 5 Support Software here.
    http://support.apple.com/kb/DL1638
    How do I use the Boot Camp 5 Support Software I downloaded from the web page?
    The download file is a .zip file. Double click it to uncompress it.
    Double-click the Boot Camp disk image.
    Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
    Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
    Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
    When your system restarts your Windows 8 installation is done.
    Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
    How do I format USB media to the FAT file system?
    Use Disk Utility to format a disk to use with a Windows computer. Here's how:
    Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
    Open Disk Utility.
    Select the disk you want to format for use with Windows computers.
    Click Erase, and choose one of the following from the Format pop-up menu:
    If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
    If the size of the disk is over 32 GB, choose ExFAT.
    Type a name for the disk. The maximum length is 11 characters.
    Click the Erase button and then click Erase again.
    Which versions of Windows are supported with Boot Camp 5?
    64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

  • Since Yosemite upgrade, high pitch noise creating case vibration on MacBook Pro (15-inch, Mid 2009) (on watching the keynote online)

    Hi,
    Great work on Yosemite, great new design as well.
    Several problems since the Yosemite upgrade though :
        - When playing high pitch noise (watching the keynote for example), the speakers make the case around it vibrate. This was not happening under Mavericks and previous OSXs.
        - This page (post editing) does not allow the right click (works everywhere else as far as I'm aware).
        - when changing the volume, I have now the noise feedback when clicking on shift+volume up/down and no sound when clicking on volume up/down on my keyboard (was the inverse before).
        - The keyboard light was stuck in off, had to restart the computer.
    More general problems (covering the last OSX since introduction of 10.9) :
        - lack of possibility of choosing for a 3x3 set of desktops as it was before (the new mission control only allow us to have a horizontal set of several desktops)
        - Notifications cannot be turned off automatically when being in full screen. (only options for auto turn off given are "display is sleeping" oO and when "mirroring on another display" -> meh, would have prefer when having an app in full screen)
    System :
    MacBook Pro (15-inch, Mid 2009)
    Model Identifier: MacBookPro5,3
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.66 GHz
    Memory: 8 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: MBP53.00AC.B03
    SMC Version (system): 1.48f2

    Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

  • Can anyone point me to the correct type of RAM to purchase for a MacBook Pro (15-inch, Mid 2009)?

    I have a MacBook Pro (15-inch, Mid 2009) that recently had some problems and I was forced to reinstall OSX and ended up upgrading to Yosemite (I was previously using Mavericks). Unfortunately I did not realize how much OSX 10.10 would slow down my computer, so I'm looking to upgrade my RAM from 4GB to 8GB to help resolve this. However, I don't really have a good idea what type of RAM I need aside from the fact that it needs to be 1066 MHz. I was hoping someone might be able to point me in the right direction as to what the exact type of RAM I need to purchase or possibly link me to a site where I could buy what I require. I know some people claim third party RAM doesn't work as well as memory that is made and/or sold by apple but I would prefer to go with whatever is cheapest.

    A 15" mid-2009 MBP RAM specifications are: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM.
    As has been pointed out, OWC is an excellent source for Mac compatible RAM.  Crucial is another first rate source for Mac RAM.  RAM from either vendor will work just as well as any purchased from Apple with the bonus of being less expensive and having a lifetime guarantee.
    Ciao.

  • HT201938 connecting MacBook Pro (15-inch, Mid 2009) to Hisense TV with audio?!?!!?

    hello everyone.
    if anyone is familar with successfully getting the older macbook pros that dont support audio out to stream and preform digital audio on a TV or has any helpful information that will get me familiar with trying to successfully stream audio and visual. and can PLEASE HELP ME in any way to understand what they know and teach me how to solve my problem id really appreciate it.
    i want to connect my MacBook Pro (15-inch, Mid 2009) to my Hisense LED LCD TV, ModelNumber:40H3E  and getting digital audio sound from my TV as well as video, but have no clue on how or where to even start to successfully pairing the two and getting sound.
    I own a MacBook Pro (15-inch, Mid 2009) this MacBook model doesnt support an HDMI port. My MacBooks model has the Mini Displayport which supports video out but does not support audio out. Can someone help me by telling me exactly which Mini DisplayPort to HDMI adapter with audio will support my model MacBook Pro (15-inch, Mid 2009) and exactly what HDMI wire do i need to buy that will successfully preform digital audio and sadisfying quality visual through TV?
    i have NO expierence with the proccess have NO knowledge about any of this or these Mini DisplayPort to HDMI adapters with audio. i have no idea what kind of adapter and HDMI cord to buy that will give me sound from my tv for my type of macbook. '
    im not familar AT ALL with any of this so i hope me giving you my MacBook Pros make and model and my TV's model number will be enough information for someone to help me.
    just please give me anything you can on this topic
    thank you so much,

    These are user to user forums, your describing a serious hardware issue that needs to be serviced by Apple.
    Good luck and I hope your issue gets resolved.

  • My MacBook Pro (15-inch Mid 2009) question mark on startup

    My MacBook Pro (15-inch Mid 2009) has a question mark on startup.
    I brought it to my local apple service centre and they told me that after a few tests it was the hardrive, so they changed it under-warranty. Back home I started re-installing my system and got again a question mark on startup.
    I decided to put the hardrive in a FW800 external enclosure and boot my system this way and the computer started without any problem. I reinstalled the hardrive in the MacBook Pro and again got a question mark on startup.
    I decided to buy another drive, Seagate momentus XT 500Go, transfered all my files in this new drive and I installed it inside the MacBook Pro, still the same question mark on startup. I installed it again in my FW800 external enclosure and everything worked fine.
    I decided to installed it again in the MacBook Pro, load the computer via the original Mac OSX install DVD, load the system and try to install a new fresh one on the hardrive... no hardrive were found....
    So I decided again to bring it back to the same local service centre, and they told me again it was the hardrive the problem... but they don't want to listen to me when I told them that all my hardrives can startup the computer via an external enclosure....
    So I would like your help, I think the problem come from the cable that linked the HD to the motherboard or the SATA chip inside the motherboard, but they don't want to test it !!!!
    Thanks in advance for you help, I have been without my computer since 2 weeks now and I can't afford working without it any more !!!
    Sincerely
    bosa30

    You need to take this computer to a real Apple Store. Or call AppleCare. Obviously this "local serve centre" doesn't have the skills to deal with your issue.
    I'd also check your RAM, as an easy first step. But I think the HD controller in your Mac is bad, since you can boot from an external drive.

  • Macbook pro 13 inch mid 2009 S.O.S morce code 9 beeps

    Hi! So my problem is that i have Macbook Pro 13 inch mid 2009 and it makes S.O.S morce code sound? What does it mean and where can be the problem? i did read about firmware restoraition cd for macbookpro 5.5 but i cant find it anywhere? Please help me! I just bought this macbook used, and there was not a hard drive in it, but i got the all CD's that came with it, but theres no restoraition cd. Thank you!

    Yes it is and here is more infromation about it.
    2GB (two 1GB SO-DIMMs) of 1066MHz DDR3 SDRAM; supports up to 8GB
    2.26GHz MacBook Pro
    (MB990LL/A)
    NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
    it came with 160gb hard drive but the seller took it becouse he had his own files in it, so u did put new 500GB hard drive in it.

  • MacBook Pro (13-inch, Mid 2009) - Maximum internal hard drive size and speed?

    What is the maximum size of hard drive and speed for an internal hard drive to my Macbook Pro (13 inch, Mid 2009), please?
    I bought myself a Technics 1TB, 7200 rpm internal hardrive. Made a clone successfully in Super Duper.
    It fits, but It is not available for starting up my Macbook Pro. Not available in System Prefs, but visible and grey in Disc Utility.
    Although it starts up my Mac Pro just fine.. but not my Macbook Pro.
    Is there a limit of hard drive specifics?
    What is the maximum size of hard drive and speed for an internal hard drive to my Macbook Pro (13 inch, Mid 2009), please?

    Thanks for the reply
    I cloned the Technics HDD ( 2,5" HGST Travelstar 7K1000 - 1 TB : HTS721010A9E630) from the MBP.
    I tried to boot it up with my Technincs ( 2,5" HGST Travelstar 7K1000 - 1 TB : HTS721010A9E630) installed in my MBP (as my internal hard drive).

  • I have a MacBook Pro, 15-inch, Mid 2009.  I would love to upgrade to a Solid State Drive.  What is the best possible upgrade I can buy.  I need the specs and even brand name.  Thank you to anyone who can help.

    I have a MacBook Pro, 15-inch, Mid 2009.  I would love to upgrade to a Solid State Drive.  What is the best possible upgrade I can buy.  I need the specs and even brand name.  Thank you to anyone who can help.

    A 15" mid-2009 MBP RAM specifications are: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM.
    As has been pointed out, OWC is an excellent source for Mac compatible RAM.  Crucial is another first rate source for Mac RAM.  RAM from either vendor will work just as well as any purchased from Apple with the bonus of being less expensive and having a lifetime guarantee.
    Ciao.

  • Is there a maximum RAM capacity for a Macbook Pro 13 inch Mid 2009?

    My questions is essentially, is there a maximum RAM capacity for a Macbook Pro 13 inch Mid 2009? I'm aware there are two RAM slots in my machine, but in past experiences with other laptops/desktop computers (not Apple) there was a default maximum which couldn't be overidden despite how much RAM was inserted.

    You can upgrade up to 8GB using 2 x 4GB 204-pin PC3-8500 (1066 MHz) DDR3 modules. That's the maximum (unlike 2011 and later models which Apple tells you can only hold 8GB but can actually run 16GB).
    If you do order RAM, order from a Mac memory specialist - Crucial, OWC, Corsair, etc.
    Good luck,
    Clinton

  • Mag safe adapter for macbook pro 15 inch mid 2009 model

    is it safe to  use a 60 watts mag safe adapter for my macbook pro 15 inch mid 2009 model. i went to istore to have a battery replacement and they advice me to change my 60 watts mag safe to 85 watts because it is not compatible.....

    use the 85w charger.
    "Power adapters for Intel-based Apple notebooks are available in 45W, 60W, and 85W varieties. Although you should always use the proper wattage adapter for your Apple notebook, you can use an adapter of a higher wattage without issue.
    For instance If you have a MacBook (13-inch Late 2009) that normally uses a 60W adapter, you can also use an 85W adapter with that computer. You would not use a 45W adapter with that computer; it would not provide enough power for that MacBook. "
    http://support.apple.com/kb/HT2346

  • DDR3 RAM compatibility with both Macmini (Mid 2010) and Macbook  Pro (13-inch, Mid 2009)

    Is the DDR3 Memory Module compatible with both Macmini (Mid 2010) and Macbook Pro (13 inch Mid 2009) models
    If thats the case I can buy 8 GB (4 GB * 2) then have my RAM already in my Macbook Pro to my Macmini
    Thanks
    Shas

    Yes its the same ram 204 Pin SO DIMM DDR3 PC3-8500 1066MHz

  • Airdrop not working on macbook pro

    Hello,
    I have a MacBook Pro (17-inch, Early 2009). AirDrop appears on finder or "Go" menu, but does not find any device.
    I would appreciate any advice.
    Thanks
    Ignacio

    Yes, yesterday I shared a file between two iphones.
    This is how the AirDrop window appears.
    Thanks,
    Ignacio

  • MacBook Pro 13 Inch, Mid 2009, Screen Fading to White/Purple

    Recently my MacBook Pro 13 Inch screen started having problems. At first the right, bottom corner of my screen started flickering and have small, white, lines that would flicker and simply go away after I adjusted the screen a little. Then the whole screen would spontaneously start fading to white/purple. It happened once or twice a week the first time, but now it's happening repeatedly, over 5 times a day. It's gotten to the point where I can't seem to make the fading go away by moving my screen, only by completely closing my MacBook then opening it up again.
    The screen usually starts fading when I move the screen back or open my Mac. When the screen goes white/purple, everything else works, the audio, mouse, keyboard.
    This isn't my mac or my video but it looks like this: http://www.youtube.com/watch?v=f6MhluTYfYw
    I did a little bit of Google-ing and reading the Apple Discussion forums and found that this is a pretty common problem. Some people say that it's a loose cable, or a pinched cable, or the screen itself, but I'm not sure on what it is, all I know is I want to get it fixed.
    My questions:
    - Is there anything I can do to fix it?
    - How much will it cost to get it repaired? (My warranty ran out)
    - Where's the best place to get it repaired?
    Thanks,
    Josh

    Same problem mate and also out of warranty. Took it to the Apple Store, they had a quick look at it in front of me and told me it needs a new display. Quick job for them but it costs £280. Definitely seems like a loose connection to me, due to excessive opening and closing. I'm quite reluctant to open it up myself but after seeing a few videos on youtube, I think I might give it a go and see if I can fix it myself.
    I wouldn't trust anybody else than Apple to fix it if only it wasn't so expensive.
    Let me know if you find any other way.
    Thanks
    Liv

  • Macbook Pro 13-inch, mid 2009. Heat Issues

    Hi!
    What can i do?
    I have a macbook pro 13" from 2009.
    The fans are always on 1999 RPM, they never go faster, not even when the computer reaches a temperature of 80° Celcius.
    As soon as I go to youtube to watch a video, the temperature goes up alot, but the fans stays at 1999 RPM and they refuse to go up. So the computer just gets warmer and warmer.
    So I downloaded a program called smcFanControl, and when i watch usually any video on youtube, the temperature goes up to around 64° Celcius with the fans running at around 3500 RPM.
    I can forget about watching ANY HD 720p video on youtube, because then the computers temperature reaches at least 70° Celcius even with the fans running at 4000RPM.
    I am SO sick of this heat issue.
    What can i do?
    The room I am in, isnt even warm. My sisters Sony Vaio is at 40° Celcius when watching the same HD 720p video.
    And this problem doesnt only occur when I watch HD videos, i get it no matter what video I watch on youtube. Highly annoying.
    Why cant my macbook pro control the fans automaticly? Is there any program that i can use so it controls the fans automaticly? Because I am SO tired of controlling the fans all the time, i need to control them when I go to youtube, when i go to expressen.se (Swedish news online), I need to control them when using videocall via skype, yeah almost all the time!
    Does anyone have the same problem? Or any idea what to do? It doesnt even matter if I'm downstairs in the livingroom where its really cold, I cant watch videos on youtube without the temperature reaching sickingly 80°celcius, or 64°Celcius with the fan running faster, which I have to do manually by the way.
    I would just love for my macbook to control them automaticly, I hate that i have to do it.
    Please help.
    I run Mac Os X 10.6.3 (Snow leopard), I have a 2,26 Ghz Macbook Pro 13 inch from mid 2009.
    SMC-version 1.47f2
    Please help,
    Kind regards

    Hi again PatrikK,
    The temperature that SMCFanControl reports itself is the CPU A temperature diode one from what I can see. As a test I ran SMCFanControl alongside Marcel Bresink's excellent shareware program "Hardware Monitor" , which provides much more detailed information about temperatures , speeds, power demand, etc etc, than SMC is able to do, to test this and the CPU A temp diode was certainly the closest to the Hardware Monitor readings. On the video pages of the Swedish newspaper site it was generally about 10ºC hotter than the CPU core temperatures, which were generally in the 60'sC, while the CPU A diode was in the 70'sC.
    So, with your CPU Diode temp at 80ºC the CPU core temps were probably only at about 70C, which, as I said, is about where the fan speeds actually usually start to increase under normal MacOSX control. (The algorithms used to determine fan speed in Macs aren't actually based on CPU temperature alone, but depend on the readings from various temperature sensors, together with measurement of electrical current draw etc, so no single CPU temperature is responsible)
    All in all, when I look back at your earlier post as well, I think your MBP is probably simply operating normally in the situations you mention. It certainly won't be doing it any harm (the maximum CPU core temperatures allowable for the 13" model are either 90ºC or 100ºC, depending on the actual procesor fitted, and this equates to a CPU A temperature diode - the one your software is measuring - of over 100ºC.) At 80º CPU A temperature the fans should only just be starting to increase, and you will find that they cut in quite aggressively from then on in, making sure that the core temperatures are not exceeded.
    So I don't think you need to worry about this situation in terms of the computer itself, though you should certainly be able to reduce the temperatures somewhat if you follow the approaches I mentioned with respect to Flash etc in my earlier post.
    If your concern is mainly comfort when using the computer, all I can suggest is that you follow Apple's own instructions about these computers being "notebooks", not "laptops", and when using it in a comparatively "high demand" situation such as watching flash videos use it on a desk, or do what I do and simply stick it on a thin plastic or wooden board when it is resting on my knees. There are all sorts of fancy "laptop cooler" devices out there that you can spend money on if you wish, with everything from powered fans to chemically based cooling processes, but I've always found that a light weight $2 plastic chopping board from Ikea does the job perfectly well in such situations!
    Cheers
    Rod

Maybe you are looking for

  • Itunes store won't load, no error message

    got a partial page one time, now nothing; internet radio loads fine, passed network diagnostics after a bit of a wait....

  • Help me plz cant install iTunes 7.6 or later

    hi well i have a 3rd generation ipod nano (the short fat ones i think) lol, but well i used to have itunes on my windows XP comp but i accidently broke that one and now im on a Windows 2000 and it wont let me install itunes 7.6 or later because it sa

  • AC 10 MSMP Workflow

    Hello Experts, We are just trying to configure the basic components of Access Control on AC 10. We have configured PSS and when we are trying to configure workflow for access requests we are running into issues. I Just wanted to check what I configur

  • Used DC's

    Hi In developign an Webdynpro application I want to add a Local DC Component CompB to the Root Component CompA. To do this I nagivate to DC MetaData -> DC Definition -> Used DC's -> Add Used DC's (from Context Menu). From here I can navigate the othe

  • Need some advice on startup scripts

    This is for a MythTV box.  Grub's menu.lst is setup to give the option to boot into runlevel 5 (starts X-Windows and mythfrontend) or runlevel 3 (terminal). When started in runlevel 5 the ivtv-fb module should load to put the X-Windows output to the