Airdrop works one way but not the other?

There are two Macbook Airs in my house, both new models (one 13" the other 11"). Airdrop appears to work from the 13" to the 11" but not the other way around. The error message in the console is:
29/07/11 11:09:49.684 PM Finder: WormholeClient::didFail(kCFErrorDomainCFNetwork, -1200, "An SSL error has occurred and a secure connection to the server cannot be made.")
I've tried logging in to another (new, clean) user profile to see if there was some kind of conflict going on, but that didn't make a difference.

It's the firewall settings. It seems like a bug, because in the firewall I had Finder set to allow all incoming connections.
Do the following:
- System Preferences, Security, Firewall, Advanced settings
- Remove the entry for Finder by selecting it and press the minus button
- Check allow signed software
- Uncheck block all
It's working for me now.

Similar Messages

AirDrop and Firewall - works one way, but not the other

This is strange:
I have AirDrop on two computers and each of them 'sees' the other (on the AirDrop radar).
When I drop a file, it tells me that it's waiting for the other computer to accept it.
On the other machine the dialog pops up and asks if I want to save the file.
This ist all good.
When I try this the other way round, I do not get the dialog to save and finally the sending machine expires.
When I switch off the firewall on the receiver that does not accept files, it works flawlessly.
However: the other machine has the firewall enabled all the time, and receiving does work there no matter what.
This is all bad.
Somehow the firewall seems bugged. The gui does not allow for a lot of experimenting and I am not very good at the console.
Can someone tell me how to get the firewall to be on and still be able to accept files via AirDrop?
"ipfw flush" did not help.
Thanks for the help!

It's the firewall settings. It seems like a bug, because in the firewall I had Finder set to allow all incoming connections.
Do the following:
- System Preferences, Security, Firewall, Advanced settings
- Remove the entry for Finder by selecting it and press the minus button
- Check allow signed software
- Uncheck block all
It's working for me now.

Links work one way, but not the other.

My site is sbrownarchitects.com.
When beginning from the Home Page any of the links work. However, when going from any of the pages back to the home page or to other pages, the links do not work. Help! Thanks!
I believe this is the code that deals with the text? I'm not a code pro quite yet---but its coming.
<div id="container">
<div id="sidebar1">
    <h3><a href="index.html" class="navigation">Home</a></h3>
    <h3><a href="about.html" class="navigation">About</a></h3>
    <h3><a href="Portfolio.html" class="navigation">Work</a></h3>
    <h3><a href="people.html" class="navigation">People</a></h3>
    <h3> </h3>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p><strong>646-244-5870</strong> </p>

There appear to be different versios of those links, particularly in the Work page, where I found the following...
<h3><a href="index.html" class="navigation">Home</a></h3>
<h3><a href="production files/About/About.html" class="navigation">About</a></h3>
<h3><a href="production files/Work/Portfolio.html" class="navigation">Work</a></h3>
<h3><a href="production files/People/People.html" class="navigation">People</a></h3>
So you may want to go thru and make sure the links for all pages are consistent. I'm noticing on those that capital letters are used where they aren't in the other set, so that's something to be mindful of as well.

Home sharing between accounts works one way but not the other

My husband and I each have separate user accounts on my Macbook.
I have turned on Home Sharing in each user's iTunes, and I can see my husband's library (which only contains one song) but he cannot see mine.
He's just got a new iPhone, and I want to sync it to his contacts and calendar etc on his account, but that'll mean he'll have no music.
Any idea where I've gone wrong?

I'm having the same problem - my Mac mini, which I bought to act as an iTunes server, can see my MacBook Air's library, which has hardly anything, since it has hardly any storage, but my Air can't see my mini!

Push One Way But Not The Other

I'm sure this has been address countless times, however I couldn't seem to find a post on this particular problem.
I have MobileMe, iPhone 3G, and the latest and greatest iPhone OS, everything's up-to-date. Push is enabled and it works great. However, when I get a new email, it'll pop up on my MacBook and my iPhone, no problem. If I check it on my computer, the alert badge on the iPhone will stay put until I physically open up mail and mail then updates itself. However, if I check the new mail on my phone first, the mail badge on the computer will go away just fine. Not a life or death situation but it's slightly annoying, it might not even be a problem..any thoughts? Thanks

Has been this way since Push was available on the iPhone, does not update the badge each time you make a change from another device. Presumably this is to save traffic and battery power. I can live with this as I can remember I've read/deleted mail, if you cannot you can send your feedback here:
http://www.apple.com/feedback/iphone.html

My ipad screen won't turn one way when I turn/bump my ipad (will do one side but not the other)

My ipad screen won’t turn one way when I turn/bump my ipad (will do one side but not the other)

Yes there is a rotation lock setting.
First try the switch above the volume rocker. If that doesnt work then double click the home button. It should display a multitasking bar at the bottom of the screen. Slide that to the right and it should display a few settings including screen lock. Make sure that it is unchecked.

"No connectivity with the server" error for one document but not the other, in the same document library

We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?

It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

Why is home sharing showing up on one computer but not the other?

My homesharing is showing up on one computer but not the other! They are both under the same account and both iTunes are up to date. Unfortunatally, of course its showing up on the computer that I dont need it on. Please help me! Thanks!

It could be a firewall issue. Try disabling the firewall and see if that helps.

"printer is offline" appears on one computer but not the other (both windows 7)

printer is offline" appears on one computer but not the other (both windows 7)

This is pretty common to see when your firewall kicks in and blocks certain communication paths the printer takes.
Here's a list of ports and programs that when allowed through the firewall, will restore communiction.
Ports to open:
UDP ports: 427, 161, 139
TCP ports: 9200, 9220, 9290, 9500
Programs to allow:
hpiscnapp.exe
hpoews01.exe
hpofxm08.exe
hposfx08.exe
hposid01.exe
hpqkygrp.exe
hpqste08.exe
hpqtra08.exe
hpznui01.exe
hpzwiz01.exe
SLP_Service (also known as UDP 427)
Have your security software provider walk you through allowing these items through your firewall.
If this does not fix your issue, it is most likely an issue with the driver configuration. Your router may have assisgned the printer a new IP address and this can be changed in the properties of the existing driver.

Encrypted message on one Mac, but not the other, from same server

I run Mail.app on two Macs, both getting mail off the same Exchange server. Multiple times in the last few weeks, a message will download to one Mac and be fine, and then the other Mac will retrieve the message, and it will suddenly be encrypted. Before a bunch of garbled text, something like the following always appears:
--000_25539419161D7744ABC322B480ED5DA507650F7Acmhprdexc04netj
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: base64
If you go to Webmail on the server, the message reads fine. And it is readable on the other Mac. I tried going to View/Message and choosing "next best alternative" but those options are grayed out. Could there be anything else set locally that is making the email unreadable on one machine but not the other? The unreadable version is always on this Mac (a Mac Mini) and not the other one (a MacBook), even though both are running the same OS version and Mail.app version.

Navigate to your Applications folder.
Right Click on iTunes and select Show Package Contents.
Navigate to Contents/MacOS/
Double-click on iTunes Helper(to get it running). This allows iTunes to start when you plug in your iPhone.
Open System Preferences and go to Users & Groups.
Select the Login Items tab to view the list.
Drag iTunes Helper from the Finder into the Login Items to get it to run at login.
Delete it from Login Items on the Mac you don't want it to start iTunes on.

IPhone 5 wifi works in one room but not the other.

I have an iPhone 5 and the wifi is unreliable. It works in the room with the router but when I walk down the hall it doesn't work. I'm talking 20 feet away. So frustrating because the phone is almost worthless. Why would it connect but only in such close range? No other devices have this problem. Yes, I've turned the wifi on and off. Yes, I've restarted the router. Yes, I've checked the WEP. It just makes no sense that it would work in one room but not the next room. Help!

Hello Gnpco,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/HT1365
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Best of luck,
Mario

Enterprise Mgr works with one db but not the other

Hi
We have two Oracle 10g databases installed. Enterprise Manager works with the second, but not the first. I believe the problem started when we migrated the host server to another network domain. Everything else works fine, but I'm getting a page load failure when attempting to access enterprise mgr.
The second db was installed after the migration and EM works fine.
Can anyone tell me how to reconfigure this?
Thank you

by any change hostname or ip was changed during migration
also can u paste the emoms.trc ?

Ipod works on one computer but not the other?

Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.

Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Patrick

CR2 files open from one camera, but not the other in CS2

Running Mac with CS2. My camera raw files shot with my lovely Canon 5D open and can be viewed in bridge and in photoshop, but NOT the camera raw from my brand new Canon powershot G9. They are both producing CR2 files. I can see the images in the bridge browser window, but when I double click to open I get a dialogue box that says, "Could not complete your request because Photoshop does not recognize this type of file." I have the 3.7 plug in installed. Please, some god or goddess of photoshop out there, show me the error of my ways!

Walt,
I will answer your questions to the best of my ability. But hopefully others who are better at this than I am will offer their help as well. So, here goes.
1. Everyone has their preferred method of using Bridge. In the Photoshop preferences I have not checked the box to have bridge start automatically. Although I use Bridge most of the time, there are occasions when I don't want to use it. So I prefer to start my Photoshop session by starting Bridge first, and then double-click on an image in Bridge to have it opened in Photoshop. In the Bridge preferences, I have checked the "Double-Click Edits Camera Raw Settings in Bridge", and I like working that way.
2. I have seen several people comment about having this problem. And occasionally it will develop after you have been using Bridge/Photoshop for a while. The only thing I can suggest is for you to hold down the Ctrl key while you start Bridge. A dialogue will appear that will allow you to reset your preferences. There are three options and you should choose all three. I know, you haven't had it installed very long, but this "could" be the problem. One guy I talked with said that he had to do it several times before it fixed the problem.
3. You indicated that you downloaded Camera Raw 4(5). What does that mean? Did you download version 4.5, which is the latest version? And, did you follow the installation instructions that were on the download page? The new plug-in must be put in the exact directory specified, replacing the old version that is already there. The old version cannot be put in a sub folder. You might as well get rid of it. You don't need it anymore. And, again, it has to go into the specific folder designated in the instructions. After you have done that, in Photoshop goto Help/About Plug-ins and click on Camera Raw. It should only be listed once, and when you click on it you should get a dialogue that will tell you what version you have installed.
4. After I installed CS3, when I inserted a card into my card reader I was presented with the normal Windows options. One of the options I was given was to download using Bridge. I chose that option and indicated to always use that option. I haven't had any problems with it since. But if that option isn't there, you can open Bridge and click on the File menu. There is an option to download images from your camera. It has worked well for me.

QTSS Works on Mac but not the other

I have a Server running OS X Server 10.5.8. I am running QTSS and Apache on this machine, however I am having issues with Quicktime streaming. One mac here is able to successfully stream but all other macs on our network fail to connect despite the QTSS "Connections" window shows the connection to the machine trying to stream the video. In the end on the client Quicktime X shows "Not Found" however I am able to connect to the server via other services (ARD, AFP, HTTP). I can post any logs that might help.
Thanks in advance

I couldn't remember what the Display Preferences had said when we tried this last spring and again in the summer, so tonight we connected it again, and wouldn't you know - it worked just fine. We didn't do anything different, so I have no clue as to why it worked this time but not before. He's thinking about getting his own big display, but didn't want to waste his money if he couldn't get it to work, so now I guess we're shopping for another 23" display - probably a used one. Thanks!

Airdrop works one way but not the other?

Similar Messages

Maybe you are looking for