Airplay-connected Macbook Pro Will Not Play Audio On Apple TV

After upgrading to a Retina Macbook Pro running Mavericks (10.9.3), I can no longer play audio using AirPlay through my AppleTV 2. The video connection is flawless, yet when going into Sound > Output through System Preferences, I can not select AppleTV | AirPlay as an output device. Is this a hardware issue? Is there another fix available?

That actually did the trick. Well played. It would be nice if that were in *any* of the support documentation for AirPlay.
Many thanks.

Similar Messages

  • My Macbook Pro will not play a Disney DVD (Howl's Moving Castle). It says supported disc not available but it plays on my cousin's Macbook Pro.

    Basically my macbook pro will not play this one DVD. It is a dvd that is fresh out of the package that I order from amazon and it is the second dvd that I have tried. Amazon sent me a new dvd when there were problems but both are not working but my laptop will play all other dvds, including the bonus dvd that came with the dvd i am trying to watch. I tried playing the dvd in my cousin's macbook pro and it worked. I already repaired discs permissions and restarted my computer but i cannot get this dvd to play for the life of me. When I put it in the disc drive the laptop buzzes for a few seconds then spits it out. When I open dvd player before hand and hit play it gives the message "supported disc is not available"

    The laptop is about 2 years old, and I watch a lot of movies on it. I would think I had set the region but I could be wrong. I'm in North America wouldn't that be the preset? Also, how would you go about changing or double checking that. Also if a movie was from a collaboration of disney and studio ghibli (japanese studio) would that mean I have to change the region just for that one movie? It would be weird if it were that way because I have another movie by disney and studio ghibli, and it plays, for that matter so does the bonus feature disc that came with this movie....

  • MacBook Pro will not play or recognize dvd

    MacBook Pro will not play or recognize dvd

    It could be something wrong so i would sugest going to eBay and buying the same model you have that is listed for parts. These are usually cheap and most parts can still be used. Chances are that the disc drive will work because the "For Parts" means the computer does not work and the disc drive does not affect the computer's working order.

  • MacBook pro will not play a commercial video dvd?

    My 17" MacBook Pro will not play a commercial movie DVD.  The computer appears to referance the disc 5 times then ejects the disc.  I have never played any video on this computer before and I have had the computer for 2 year. I can not get the settings correct or something.   If anyone has any suggestions on this problem please let me know.

    Can you describe in a handful of bullet points:
    what content you are exporting (slideshows, home movies)
    how you did it in Aperture
    how exactly you burned it (program, settings, etc..)
    We need a bit more info... before you start reaching for your wallet
    But I must say, I nearly agree with ClayG on the replacement. DVD superdrives are cheap these days.
    Depending on how often you use it to watch or burn, I woudln't even bother having it fixed.
    If you use it once a week and are not on the road when you do, just get an external bus powered one - it will likely have a dual USB cable, so you'd need two USB sockets - I got one and it worked well

  • My macbook pro will not play a video without pausing every 11 seconds. PLEASE help me figure out what is wrong. very frustrating

    my macbook pro will not play a video without pausing every 11 seconds. PLEASE help me figure out what is wrong. very frustrating. I have already tried restarting

    buckmacie,
    has the video been completely downloaded onto your MacBook Pro when you start to play it? Or are you playing it while it downloads, AKA streaming it?

  • Macbook Pro does not play audio part of video

    Hi,
    I have a Macbook Pro (early 2013 with OS 10.10.1).
    A colleague sent me a video file, which was originally recorded in MTS format. The sound portion of it does not play on my machine, although it generally can handle MTS. I have a colleague with a Windows PC, for him the audio plays ok. I have another colleague with an older MBP, for him the audio also plays ok. But then I have two more colleagues with a newer MBP like me, and for none of us the audio plays at all. The strange thing is that I can open the file in various editors such as Premiere, Audition, or Logic Pro, and they would all show the waveform of the audio, even the VU meters react normally, but there still is no audible sound.
    On the machines that play the sound, we have tried converting the video and exporting the audio portion into various other formats, but with the very same result. None of them play sound for me. This is extremely weird and we have no answer what could be the problem.
    Any help would be very much appreciated.
    Thanks a lot & best regards,
    Rainer

    Hi Eric,
    thanks for the reply.
    As I said, we had tried several editors and players, as well as all kinds of formats, using all kinds of converters, but so far to no avail.
    The AAC codec is a common codec for the Mac, so there should be no need to convert it. I have videos with that codec that play ok. It already turned out that converting the video file to other formats does not make any difference.
    But thanks anyway,
    Rainer

  • After last uppgrade, Quicktime Pro will not play audio on my avi movies.

    After last update, I will not get the audio on my old .avi movies. Does Anyone else have the same problem?

    That actually did the trick. Well played. It would be nice if that were in *any* of the support documentation for AirPlay.
    Many thanks.

  • My MacBook Pro will not play YouTube videos ever since I downloaded and upgraded to OS X Mavericks. Any suggestions?

    I know that this is not an issue with my internet not working, because I have this problem regardless of which wireless network I am connected to. Thank you!

    Try unistalling and reinstalling
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
    http://get.adobe.com/flashplayer/otherversions/
    Also see this:
    Re: I am unable to watch youtube videos online
    created by Linc Davis in MacBook Pro - View the full discussion
    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 5.
    1. If you're only having trouble with YouTube videos, sign in to your YouTube account and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    2. If you're getting a "blocked plug-in" error, then from the menu bar select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Check Now. Quit and relaunch your browser.
    3. Triple-click anywhere in the line below on this page to select it:
    /Library/Internet Plug-Ins
    Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu.* A folder should open. Delete the following item, or anything with a similar name, if present:
              •          Flash Player (failing).plugin 
    You may be prompted for your login password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    4. Re-download and reinstall Flash. Download it from this page:
    Adobe - Install Adobe Flash Player
    Never download a Flash update from anywhere else.
    5. If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked Enable plug-ins.
    6. Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.
    7. In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Hope thi helps
    Credit Linc Davis

  • My macbook pro will not play adobe tv episodes.

    My MacBook Pro used to run Adobe TV episodes but since I downloaded OS X 10.8.5 they no longer run.  Do I need to change some settings.  Help.

    If you are still having technical difficulties playing Adobe TV videos please contact me offlist with a detailed system configuration information and I'll assist you. [email protected]

  • My Macbook Pro will not load past grey Apple screen...

    Last night my Macbook Pro froze so I closed it and went to bed. Today when I opened it, it was still frozen, so I held down the power button and rebooted it. It got as far as the grey Apple screen with the spinning wheel and will not load any further than that. I've rebooted a couple times since and it continues to do the same thing, stays on the grey screen forever.
    I searched this problem on the Apple Support Communitites and none of suggestions (holding Shift after the startup tone, holding Command+R) have worked so far. Is there any way to fix this problem without losing my data or having to pay to talk to Apple Support? PLEASE HELP! :(

    Zzoozu wrote:
    None of that made sense to me or helped me. Anyone else? Maybe someone who has answers dor someone not a computer genius?
    Then we can't help you as we need you to be able to help yourself and the instructions are complicated and long to paste here over and over again for the same proceedure.
    Hire the services of a local Mac computer repair before you delete your data by accident.
    You can jump down and do #8, that might clear the issue right away, but some programs are not going to work and require updating or reinstalling again.
    ..Step by Step to fix your Mac

  • My macbook pro will not play any videos what so ever. all comes up as plug in failure no matter what browser. i have updated everything. some one please help me?

    all comes up as plug in failure no matter what browser. i have updated everything. some one please help me? its been going on for a month. but it used to go away if i restarted the browser. and now nothing works.

    Try re-installing Quicktime.

  • My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees'it

    My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees' it

    Hi there tomcrud,
    You may find the information in the article below helpful.
    OS X Mavericks: Set up Bluetooth audio devices
    http://support.apple.com/kb/PH14217
    Also, make sure your iPhone is not paired to the speaker while trying to piar it to your Mac.
    -Griff W. 

  • MacBook Pro will not connect to the internet

    Suddenly, my MacBook Pro will not connect to the Internet--even when I take the cable from the Time Capsule and plug it into the laptop...
    -Internet is good
    –WiFi is connected
    -both work with my iPad...

    You should show WiFi:
    Do you have it turned on?
    Clinton

  • My MacBook pro will not connect to the Internet through wifi yet all other devices do

    My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?

    Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...

  • My MacBook Pro will not open any application or program that requires internet, even though I am connected to the web.

    My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
    I have OSx 10.6.8.
    I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
    Any help would be greatly appreciated. Thank you in advance.

    Change your router channel.  Sometimes this is all you will have to do.
    Power cycling the router.  Read the router's user manual or contact their tech support for instructions.
    System Preferences/Internet & Network/Network
    Unlock the padlock
    Locations:  Automatic
    Highlight Airport
    Click the Assist Me button
    In the popup window click the Diagnostic button.
    System Preferences/Network- Unlock padlock.  Highlight Airport.  Network Name-select your name.  Click on the Advanced button.  Airport/Preferred Networks-delete all that is not your network.
    Place a check mark next to "Remember networks this computer has joined."  Click the OK button and lock the padlock.  Restart your computer.
    http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
    No internet connection (wireless)
    Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
    Delete all extra entries that you find.
    Place a check mark next to "Remember networks this computer has joined."
    Other resources to check into:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    Netspot
    How to diagnose and resolve Wi-Fi slow-downs
    Pv6 troubleshooting
    Mac OS X 10.6 Help:  Solving problems with connecting to the Internet
    What Affects Wireless Internet?
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    I uninstalled Norton and it didn't help.
    To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button. 
    Confirm your decision when prompted and then enter your administrator password in the space provided.
    Retart your computer & Norton should be gone for good.
    If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility.  This utility will launch Terminal & remove the Norton components.

Maybe you are looking for

  • How do I copy Ipod games downloaded from ITunes Store to my new computer?

    I've a new computer, backup of music library already on ext. hardrive, but what about my Ipod games? How can I copy my purchases on my new computer? Please help my step by step.Tks

  • ATT00001.htm attachment in Outlook when sent with Apple Mail - SOLVED!

    Hi All, We recently discovered the problem where emails with attachments sent from Apple Mail were being received in Outlook, blank but with BOTH the attachment and the email itself as an ATT00001.htm attachment! I've discovered that the problem kick

  • Mega Sky 580 Antenna Adaptor

    I've recently bought a Mega Sky 580, which worked ok, but unfortunately I stepped on the antenna adaptor and broke where it connects to the unit, which means I now cannot get any reception. Can anyone tell me where I can buy a replacement adaptor, as

  • N660 GAMING 2GD5/OC vBIOS

    Hello, I've recently bought an MSI N660 GAMING 2GD5/OC with TwinFrozr IV cooling system. Until now I really thought that the MSI's dust removal technology was really working but it doesn't. Even the various reviews and the shop I bought that card fro

  • How to test if field on form is displayed?

    I want to do the following... IF :P75_ATTRIBUTE1Displayed = TRUE THEN vCol := vCol + 1; vField1Col := vCol; END IF; Can anyone tell me if there is an apex function which will let me check if a text field is displayed or hidden on a form, without reso