Airplay from 4s no video and cuts off internet connection

Airplay mirroring from 4s used to work now whenever I try it only streams audio and no video and cuts off my internet connection. Apple tv is connected with CAT6 ethernet to a dual band router. I optomized my router according to apple standards and still having issues

Having similar issue after updating firmware and utility.  Utility now is not finding ap or ape yet they seem to be functioning.  Very odd.

Similar Messages

  • New Intel WIFI Link Driver Randomly cut off Internet Connection

    Two day ago I used ThinkVantage SYstem Update and installed Intel Wifi link driver (ver 13.01.1000). But since then my computer was randomly cut off internet connection, and the wireless signal strength icon on the system tray indicated no nearby wireless network. And then it powered off the wireless connection. Whatever I do, I cannot re-power on the wireless (I used Access Connection to power on the 802.11 wireless radio, but it could not be turned on and nothing happened) unless I restart the computer. 
    I thought it might be the router that malfunctioned as this problem never happened before. But after I checked the router and used another notebook to test wireless connection, I was sure the router ran very well.
    Then I re-installed the TVT Access Connection (ver 5.61) and the Intel WIFI Link Driver (ver 13.01.1000) but the problem remained. Could anybody give a possible solution? 
    I also noticed on Lenovo's website, the Intel wireless card driver for T61 is v13.00.0000 Windows Vista 23 Oct 2009. It's lower than what I have now. Could that be the cause?
    My ThinkPad T61 has the following configuration:
    Model: T61 8897CTO
    OS: WinVista Home Basic SP2 32bit
    Language: EN
    Wireless Card: Intel 3945 ABG
    Wireless Card Driver: 13.1.1.1 (previous one was 13.0.0.0)
    TVT Access Connection: 5.61
    Solved!
    Go to Solution.

    Hi carlven,
    Anytime when wireless driver is updated, Access Connections also needs to be reistalled.
    Do this, first uninstall your wireless driver and access connections, thereafter reboot your system. Then install wireless driver first, again reboot, subsequently install access connections, reboot again.
    When installing any lenovo driver manually, keep in mind they first extract themselves to a default location in C:\Drivers..., second .exe setup must be run from that location to successfully install the drivers.
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Safari cuts off Internet connections

    I'm looking for help. My Safari cuts my Internet connections when it tries to load cnn.com and a few other pages. Does anyone have any ideas?
    Thanks

    That floating footer section isn't unimportant. It's part of a whole new <html> and <body> section (complete with <head> and <meta> tags) that somehow got dropped in right before your closing body tag:
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
    <title>Footer Code (How'd You Get Here?)</title>
    </head>
    <body>
    <a href="http://www.derekmiller.us">Home</a> | <a href="http://www.derekmiller.us/baseball/index.html">Stadiums</a> | <a href="http://www.derekmiller.us/baseball/fantasy/index.html">Fantasy</a> | <a href="http://www.derekmiller.us/videogames/">Videogames</a> | <a href="http://www.mrmilleronline.us">Students</a> | <a href="http://www.derekmiller.us/teach/">Portfolio</a><br>
    Designed by DJM Design<br>
    Email <a href="mailto:%64%65%72%65%6b%6d%69%6c%6c%65%72%40%6d%61%63%2e%63%6f%6d">derekmi [email protected]</a> with questions/comments.
    </body>
    </html>
    The wrapping html and body tags in that section of code must be removed as well as the head and meta tags included there. They will cause problems no matter what is going on with the rest of the page. A web page only has one html element and one body element.
    This doesn't seem to be the cause of the phantom Portfolio section, though. This section doesn't appear for me, either. (Reducing font size using Safari a few sizes makes it appear. Perhaps that's related to japamac's ability to see that section...?)
    I'm looking over the rest of the HTML and CSS and haven't found the problem yet. I'll poke at it a little more this morning.
    There are some validation errors: http://validator.w3.org/check?uri=http%3A%2F%2Fwww.derekmiller.us%2Findex.shtml
    You might want to go through those as well to clean things up. (Some are caused by that stray section of code.) At the very least, getting rid of validation errors can make it easier to get to the root of the problem when troubleshooting something like this.

  • Airplay from phone to ATV keeps cutting out.

    When using my ATV and airplay from iPhone 4s the audio keeps cutting out then will play agian. This will happen every 5-20 seconds. I am able to use airplay from my MBP without any issues. I have restarted the iPhone and ATV. I have closed all aps on the phone and tried both streaming and music apps with the same result. All items have the most recent updates. I have an airport express in my shop which there is no issue using airplay form the phone with any aiplay app. Any suggestions? Thanks.

    Try changing your energy saver settings.   Make sure the macbook is plugged in and change both display and computer sleep to never.  When your display goes to sleep airplay will shut off.  I don't watch a lot of tv on airplay from my mac, but this works for when I'm streaming radio or music.  I suggest getting a cheap iPod touch (with airplay) on craigslist if you don't have an iPhone.  I've seen them as low as $30.  Then get the Air Video app ($3) and the Remote app (free).  These two apps take care of all of my tv/movie watching needs. 
    If your appleTV is too far from your wireless router then you will have trouble using any of these features.  Try purchasing an extra long (100') cat5 cable from monoprice.com and moving your router to a more central area of your house.  You can even put a second router in your home using this cat5 and get great internet connection everywhere! 

  • DVD video gets cut off, but preview shows dvd as good

    Having a problem getting my video to output from dvd burning without getting cut off.
    Computer is Win xp pro, 3gb ram, 2.33ghz cpu, 40gb free hd space
    Using Adobe Premiere Elements 3.0.2.
    I have video which I've recorded from my Sanyo xacti 720p avc camera, which records in mpeg4 format. I've converted the video(s) to mpeg 1,2 for dvd using my "Need4 Video Converter 5.9". At first I tried putting several mpeg1's into my premeire project, then I also merged all the video files into one, but still had the same problem.
    I put the video(s) into my premiere project, added some titles on the other video track. Also added some music on another audio track. So, the total size of the videos is about 3.5gb. I preview my project it looks great, I added some dvd scenes and used a nice template with scene selection and captions..the works. Now I try to burn it several ways, to a dvd, to a file folder on high or low settings, but everytime I only end up with about 1.5gb of data, and 25 mins of video, so it is cut off. My original video is an hour and 50 mins.
    The encoding takes about 3 hrs after I hit burn. No errors or anything.
    So, I cannot understand what I need to do. I don't want to convert to a smaller or lower format, bcz I dont' want to lose quality. I'm at a loss bcz I've tried so many different formats and combinations, let this stuff run for so many hours this past weekend, and still can't get it to work. Is there some kind of setting I'm missing? Something in premiere?
    I've read some best practices on the forum, and I understand to use bit rate of 7mbs or less, and to burn on slow speed. Is it at all bcz I'm burning it to my hard drive? but i don't think this is my issue. is it the old software? it came with my Sanyo camera, so I would think its good enough.
    Please help if you can. I was thinking my next shot might be to convert it down to a much smaller size, and maybe it will fit(but quality may be an issue). Thanks in advance. -Ron

    Ron,
    Yes, PE is a scaled down version of P-Pro, but also has some additional features, plus an easier way of doing many things, that its "big brother" does not. As to the ability to Export/Share frame sizes, I think that most are included in PE (would have to open each and explore precisely to tell you if it's all there). I do not think that this is your issue.
    As to the conversion, I'd step back to your original footage, Sanyo MP4, right? Unless Sanyo is using a proprietary CODEC to create the MP4's, you *should* be able to Open these files in QuickTime and play them. If you have QuickTime Pro (costs about US$30 to upgrade to "Pro), you *should* be able to Export and choose DV-AVI as your Export setting. Note: the term ".AVI" can mean so very many things. What you want is DV-AVI. This is the "native" format for PE - what it converts all other file formats to, to edit. The quality loss going with this format can be measured in a lab, but is almost totally impossible to see on any TV with the human eye. Doing this will likely enhance your entire editing experience.
    As for quality and conversions and compression, your camera has already done one conversion, when it wrote to MP4. You cannot get around that. Conversion to DV-AVI will be "virtually" lossless, though the file size WILL increase. The reason is that with MP4, not all "frames" exist with full content - part of its compression. With DV-AVI each "frame" will exist with full content. Be prepared for LARGE files, but files with all of the info.
    Then, when you Burn to DVD, you WILL recompress your data to MPEG-2 format, the DVD standard. You will loose some quality there, but it cannot be avoided. It is how DVD's hold their Audio & Video data.
    I still do not have any ideas that would directly affect your movie not burning completely. If the Duration of your movie has exceeded the capacity of a DVD-5, you would/should get an error message to that effect. You do not.
    One thing to go back and look for in your original Project's Timeline would be "gaps" in the Video. These can cause problems (or sometimes not). I zoom my Timeline way up, and use the PageUp & PageDn keys to "step" through the various Clips. The CTI (Current Time Indicator - that little doobie that marks where you are on the Timeline) should move in a linear fashion from Clip to Clip. If you see it pause, or hiccup, then zoom WAY in to the max and study the Timeline there. Are all Clips butted up to each other? Now, you can have Clips on Video Tracks above #1, that would allow you to have "gaps" in the Video on VT 1. That is OK, but if you have any spots on the Timeline, where there is NO Video, you'll likely want to fix these. You can close up the gaps by moving the Clips, so that they do butt up, or if you want "black" there, just go to the New icon and choose Black Video. Size it to fit the gap, and you will be fine. You can also extend the Clip before the gap, or after the gap, if that does not mess up your editing. Several choices and each should be based on what you want to have happen. If you find a bunch of gaps (even one can be deadly) try to Export/Burn again. Note: I've seen one 1-frame gap cause problems, but just had to re-edit a Project where I fixed 900+ gaps, and that Project had already Burned 4 DVD's. Go figure.
    Last thing to look at would be to hit the "\" key in Timeline mode. This will zoom out to show the full Timeline. Do you have anything stuck out by itself, past where you thought the end was? This should yield other problems, but not the one you are experiencing. Still, who knows? It's also a good thing to do, when you believe you are done, just to check that something didn't get "orphaned" out beyond where one normally looks on the Timeline.
    Good luck,
    Hunt
    [Edit] 01:50 is longish for a DVD-5. You will not be able to set a very high bit-rate (Quality slider), but you should still get the full Timeline, or an error message.

  • HT1689 I purchased two songs and each one, half of it is silent and cuts off. I want my money back or I'd like to re-download for free

    I purchased two songs and each one, half of it is silent and cuts off. I want my money back or I'd like to re-download for free

    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I would like to get my videos and photos off my iphone 4 and in the cloud or on my computer

    Can anyone help me get my videos and photos off my phone and somewhere easily accessible ?

    You should be importing them to your computer regularly as you would with an y digital camera.
    Import photos and videos from your iPhone, iPad, or iPod ...

  • Significance of Pay Date,Direct Deposit,Pay Advice and Cut-Off

    Hello,
    Can somebody please tell me how the number of days mentioned against Pay Date,Direct Deposit,Pay Advice and Cut-Off play a role in the payroll processing?
    Eg:Direct Deposit of -3 from the end of the month that ie. 28th Jan if it is month of Jan.
    Regards,
    Gayatri

    In the Date Offset region, you can change the zero default to a negative or positive number of days before or after the period end date. For example, for a semi-monthly payroll, the Cut Off date can be 3 days before the period end date (-3), while the Scheduled Run and Check dates can be 5 and 7 days after this date, respectively.
    The Check Date, sometimes called Pay Date, is the date of constructive receipt of pay, on which paychecks become negotiable.
    The Scheduled Run Date is the date scheduled for the Regular run of this payroll each period.
    The Cut Off date, included for your reference, is the final date for entering or changing payroll information before a run.
    These offsets are the defaults for the calendar. You can manually make date changes in the calendar, for example when an offset date falls on a weekend or holiday, by choosing the Period Dates button.
    Hope this will help!

  • HT201335 Why the transmition to the tv from my iPad is slow cutting off ... Is there a way to improve connectivity ?

    Why the transmition to the tv from my iPad is slow cutting off ... Is there a way to improve connectivity ?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • Getting videos and pictures off iphone 4 onto itunes and computer

    I am trying to get my videos and pictures off my iphone and onto my computer and itunes. Every time i google this, it seems to confuse me more. Please help!

    Download Cyberduck. Other FTP software will be similar.
    Go into the wifi settings on your phone.
    click on your network.
    write down the IP address
    Open Cyberduck
    click on the open connection button
    In the dropdown menu go to SFTP (SSH File transfer protocol)
    In the server field enter your IP address
    Port is 22
    Username is "root"
    there is no password
    Once connected you'll see "Library" and "Media"
    Above that you'll see /private/var/root
    click that dropdown menu and navigate to the hard drive symbol that has "/" next to it.
    You'll now see 18 folders.
    Navigate to var/mobile/media/DCIM
    Here are all your images and video
    You can set a bookmark to this location so you're always just a click away.

  • HT4623 I have a new iphone5 and about 5 meters wifi signal is reduced to one scale, and finally cut off my connection with routerom.I also  have  iphone 4s and  ipad3 and on those I have full signal everywhere. I installed the latest softwer iso 6.0.2 and

    I have a new iphone5 and  about 5 meters wifi signal is reduced to one scale, and finally cut off my connection with routerom. I also have  iphone 4s and  ipad3 and on those two I have full signal everywhere. I installed the latest softwer iso 6.0.2 and I still have a problem!

    Just get into "General" -> last option is "RESET" -> Opt for "RESET NETWORK SETTINGS"
    Your phone will reeboot in a couple of minutes n then get fine on with full signal on the wifi scale.
    Worked perfect for me. Do try n let me know.
    ATB

  • What can't we resize our pictures to fit as our wallpapers on the ios 7 system? nice photos are being zoomed in and cut off and theres no way to fix it, this need to be changes asap! back to the way it was on ios 6

    what can't we resize our pictures to fit as our wallpapers on the ios 7 system? nice photos are being zoomed in and cut off and theres no way to fix it, this need to be changes asap! back to the way it was on ios 6.... FIX FIX FIX!!!!!!!!

    Hello keraalovee,
    Setting Reduce Motion in your Accessibility settings (Settings -> Accessibility -> Reduce Motion) can help alleviate this behavior.
    iOS 7: How to reduce screen motion
    http://support.apple.com/kb/HT5595
    Cheers,
    Allen

  • HT201274 iPhone 4s, but wifi option is greyed out. I want to erase all content and setting from my old 4s and it will not connect to the internet, because the cellular data is no longer connected, bought a iPhone 5c. how do I erase all on my 4s with no in

    I have an iPhone 4s, but wifi the option is greyed out. The wifi stopped working on it months ago. Now I wanted to erase all content and setting from my old 4s and it will not connect to the internet, because the cellular data is no longer connected, since I bought a new iPhone 5c. I can't erase my phone by pluggin it into my Macbook Pro, since I can't disable the "Find my iPhone" App without internet. How do I erase all the data and setting on my 4s without connecting to the internet? It is running ios 7

    See this https://answers.yahoo.com/question/index?qid=20131119125513AAtRloc
    I just did it. To enter DFU mode, I had to use "method 3" on this post
    http://thebigboss.org/guides-iphone-ipod-ipad/dfu-mode
    Too bad my 4S is 2 years old. Wifi is dead. I had to upgrade to 5S, but 5S is soooooo much faster than 4S so it's kind of good outcome. Without the 4S breaking down, a stingy person like me would have never upgraded the phone.

  • Hi i want to buy an ipad from america with cellular and i want to connect it in jordan does the network work in my country JORDAN , because i dont see unlock ipad??

    hi i want to buy an ipad from america with cellular and i want to connect it in jordan does the network work in my country JORDAN , because i dont see unlock ipad in apple store??
    in apple store no ipad unlock for cellular if i bring it with cellular from america does it work in JORDAN ??
    THNANK ALOT

    US iPads are not locked to a carrier. Don't buy a Verizon or Sprint model, though.
    Regards.

  • Hi, I am new to iPhone and downloaded a app from the app store and had my iPhone connected to my computer but I just cant find the app on my phone I'v checked on the desktop and the app store but it is nowhere...can somebody point me in the right directio

    Hi, I am new to iPhone and downloaded a app from the app store and had my iPhone connected to my computer but I just cant find the app on my phone I'v checked on the desktop and the app store but it is nowhere...can somebody point me in the right direction plzzzzz

    If your iPhone is not recognized by iTunes when connected - not available under Devices in the iTunes source list, check this link.
    http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US
    For voice memos, I have include voice memos when syncing selected under the Music tab for my iPhone sync preferences with iTunes which transfers voice memos from my iPhone to my iTunes library when syncing.

Maybe you are looking for