Airplay over ethernet connected Apple TV does not work

Hey guys,
I really appreciate your help!
So here is my problem:
I cannot use Airplay from my iPad/iPhone or my Macbook (iTunes + AirPlay Mirroring) while the AppleTV connection is via ethernet.
If I disconnect the ethernet cable and activate wifi, there is no problem at all. But I want to use my AppleTV wired due to reasons like stability and performance.
I have a Hitron Router, which is only working as a Modem. My real routing device is an Apple Time-Capsule. It works as a DHCP and NAT. The NAT of the Hitron Router is disabled, it only sends the internet connection and no networking stuff.
Activating/Deactivation of the WMM Box doesn't work for me, because the Time Capsule doesn't provide such settings.
I am sorry for my English.
Hope you guys understand my problem.
Thanks!

Thank you Rudegar. The problem was that the Time-Capsule did not automatically forward the TCP/UDP Ports to the wired connections or the other way around. For all those who read this thread later and have the same problem. You don't have to change all the TCP/UDP Ports on your own. The Time-Capsule and AirPort Extreme support the NAT Port Mapping Protocol, which automatically does the Port Forwarding.
A small research on Google did the rest, so it was easier than I thought.
Again thank you Rudegar for your answer
Best regards!

Similar Messages

Ethernet Connection to iMac does not work if wireless is on!

I have a Linksys modem ethernet router which I use to connect an ethernet cable to a hub which is then connected to my iMac and my Xbox. (It is also connected to my Windows PC via USB) When I connect my xbox wirelessly with 2 wireless access points Xbox live works fine wirelessly but the ethernet connection to the iMac stops working. Does the wireless signal interfere with the ethernet connection? and is there any way to fix this?
iMax G3 Mac OS X (10.4.5)

Are you certain that you have a router?
The wireless connection should have no effect on your Ethernet connection.

HT3180 I owned an Apple tv and after upgrade my internet to higher speed my Apple Tv does not work the only message that show on the screen said if time and dates are not found go to apple/support/tv tried almost everything and nothing. Please somebody

I owned an Apple Tv and since I upgrade my internet to higher speed my Apple Tv does not work. Please someone help.

In most scenarios you shouldn't need to forward ports, however if you need to, you may be best contacting your ISP.
As with most router issues, I would recommend that you contact your ISP with details of your problem (assuming that it was your ISP that provided it to you).
There are simply too many manufacturers with different software features and settings and often different names for such features and settings, that the best advice will likely come from those that are knowledgeable about your particular router.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

My Apple TV does not work and has never worked.

My Apple TV does not work and has never worked. I replaced it twice and replaced my router and DSL modem but no luck. I spent hours on tech support with both apple and my ISPs with no luck. Any ideas? Is the Apple TV a donation to apple? I have had the device for 8 months but it will not work for longer than 15 minutes before it drops with network errors. All of my other devices work perfectly on the network including 2 iPads, laptops and an old wii. I love apple products and this is the first real disappointment I have had. The Apple TV seems like a major dud of a product.

Seems unlikely you have had two faulty replacements, and more likely that there may be some network compatibility issue or problem with reception in the location the AppleTV lies - anything close to it that might be interfering?
I am assuming you are connected via wifi - if you can try an ethernet connection to rule wifi issues out.
Could you try it at somone else's house maybe? If it worked there it would point to something specific at your location.
You could try replacing it again I guess or seeing if they can offer you credit or a refund.

APPLE TV DOES NOT WORK WITH NETFLIX

APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

It started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!!

Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367

Loging into game center with apple ID does not work. What do i need to do?

My apple ID does not work for signing into game center.

Apple TV doesn't come with HDMI cable, so you would have had to buy the cable separately unless the Apple TV was bought used. Did you purchase the device from Apple or an authorized reseller?
Are you sure you're trying the right input?
The other is a smaller one that is for micro USB (which is used for support purposes only)

Intermittently iphone 6 and 6 plus is wifi connected but internet does not work.

Hi,
I have an issue where intermittently iphone 6 and 6 plus is wifi connected but internet does not work. iMessage works though. Toggling the wifi setting clears
the issue temporarily but it occurs again. Running iOS 8.3 now. This was the case on iOS 8.1 and 8.2 as well.
I have tried the typical troubleshooting steps (reboot/reset network settings/disabling location services for wifi/upgrade/etc)
My router is an EA9200 router with 2.4 Ghz and 5 Ghz. It is configured with all bands with the same name.
All other devices in my house works perfectly fine and has no disconnects (ipad/macbook air/tv's/receivers)
My thought is that iphone 6 cannot handle well the moving around between bands.
Any thoughts or suggestions would be greatly appreciated.
Thanks,
David

Have you tried to reboot your router by turning off the power (you may have to unplug it from the power source), then waiting about 30 seconds, then turning it back on? This seems to solve a lot of problems.

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

Hello,everyone.i purchased an iphone 5S from a retailer in my country after coming back to my home i restore this iphone it shows an activation id but i dont know what i have to do now?my apple id does not work in this situation.kindly help me out

Hello,everyone.i purchased an iphone 5S from a retailer in my country after coming back to my home i restore this iphone it shows an activation id but i dont know what i have to do now?my apple id does not work in this situation.kindly help me out because it cost me to high and if this is not activated i have to bear a huge loss.i am a loyal customer of apple from a past 5 years.thank you for your cooperation

Yes, this is activation lock. Return the phone for a refund, as it is useless without the activation information of the previous owner.

HT3887 I applied all your procedure to make my bluetooth is working in my mac and apple but does not works , please what i doing

Dear Sir,
I have macpro and iphone 4s. In fact, i tried many many times to make bluetooht is working between them but unfortuantely does not work. also i tried between by ipad and other devices i faced same problem. finally , i think this is factlry problem
please advice about this issue
Regards
Anmar

The iPhone will not connect to the Mac via Bluetooth, as it is not a supported protocol.
http://support.apple.com/kb/HT3647

HT3180 Apple tv does not work since software update

Proceeded wtih software update and now there is a blank screen and apple tv also does not work from ipad mirroring

So you can't access the main menu?
I would grab a mirco usb cable and restore in iTunes, update likely didn't apply correctly
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

Apple TV does not work with 877W

Hi all,
I am using an 877W as my DSL router and trying to use Apple TV or other Apple Bonjour services over Wireless. It is simply not working although I tried several IGMP configurations. I've seen some references to 877W issues but they were all about bridging between wired and wireless. In my case though everything is on wireless (PC with iTunes, Apple TV and and iPhone to be more specific). I wanted to ask once more as I've also seen references to people having this setup working ok.
interface Dot11Radio0
ip address 192.168.15.1 255.255.255.0
ip nat inside
ip virtual-reassembly
load-interval 30
encryption mode ciphers aes-ccm
ssid Princes
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2472
station-role root
end
I tried with igmp snooping on and off with no luck, also it didn't helped to add 239.0.0.0 as a static group to the interface.
If you have apple stuff working on your 8xxW environment I appreciate if you can share your configuration, any other ideas are more than welcome.
Many thanks,
Cagri

Hi Cagri,
Hope you've found an answer to your problem already, if not I had similar issues trying to get mine to work.
I did manage to get it to work in the end, I've added an article to my blog which goes over what I had to do to get it working.
Basically, configured correct multicast-routing groups, IGMP v3, pim dense-mode on both the radio and BVI interfaces and it started working.
http://www.thehelpdesk.co.nz/2012/01/how-to-use-apple-tv-with-cisco-877w.html
Cheers,
Sully.

Mac App Store Apple ID does not work

Try to access the mac app store with my apple ID under OS X 10.6.8
The mac app store still says "your device couldnt get verified"
I have changed my apple ID password several times.
In itunes everything works fine!
I want to upgrade to Lion but the appstore does not work.
Help needed

From your comment in the other thread.
Unable to verify your device or computer
1. Delete the file Macintosh HD/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
2. Reboot
3. Sign in to the app store.

Icloud log in with Apple id does not work from my mac when i try to run on photo stream

When I try to active photostream or sharing via icloud it does not work I get an errormessage that there is communication problems with icloud. I cant get around to administrate the stream from the Icloud site or via my imac directly. It has never worked!

yes, the apple id works for everyting else, but not for icloud. on my phone and ipad it is set up with the correct apple id and password. however, when i try to log on to icloud under system by clicking the icon the erromessag that i get is unknown apple id or password.

Airplay over ethernet connected Apple TV does not work

Similar Messages

Maybe you are looking for