Airplay set up query.

Hello,
I have an iMac with a set of soundsticks attached via the headphone socket downstairs.
The iMac is connected by ethernet to my airport extreme downstairs and i have a wireless network that an airport express extends upstairs.
Upstairs i have another set of soundsticks connected to an airport express.
Via itunes i can play stuff out of one or both sets of speakers but if I'm upstairs i can't see the downstairs speakers in the control centre on on iPad or iPhone (as its not connected to a network).
My question is this, is it possible to be able to use both sets of speakers at the same time via my iPad or iPhone for audio I'm not accessing via iTunes e.g. BBC inlayer?
Many thanks in advance.

Yes... but you must use separate devices to stream to their respective AirPlay speakers.
In other words, one Mac or iOS device cannot send two separate streams, but two devices can.

Similar Messages

HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green). My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple

My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

How to set a query of VO in Best-Effort Mode

Hi, I'm using auto refresh property of VO, to refresh the LOV . But i get " java.sql.SQLException: ORA-29983: Unsupported query for Continuous Query Notification" error..
So i want to set the query in best-effort-mode . May i know how to set it.
here is my query that set to auto refresh.
"SELECT DISTINCT YYYY FROM XXXXX"
Query optimizer makes the above one as below.
SELECT * FROM (SELECT DISTINCT YYYY FROM XXXXX) QRSLT WHERE ( ( (YYYY LIKE :vc_temp_1 ) ) )

If you disconnect the PMU, you will have the option to go to tristate or your previous digital state, but not ground. Forcing 0V is probably the closest you can get to a GND like behavior. The default line state is tristate for this device, which will leave the line floating if there is no active driver.
Kyle A.
National Instruments
High Speed Digital I/O Product Support Engineer - R&D

Viewlink between Custom VO "Cannot set user query to view"

We have an application where we have extended custom VO and EO’s to get data from flat files. It all looks fine till we create a viewlink for a LOV with two related VO’s. The viewlink VO fails we get message of the form -Cannot set user query to view "CustomVO1" because it is a destination in a view link”. Are there any methods to override in the custom VO/EO or any parameter to be added to configs. Has someone tried this out

Thanks for the update and for sharing the solution!
Regards,
Hussein

Set PO query for all users in POWL screen

Dear All,
In Purchase order work list (POWL) need to define a new query and set it for all the users.
Request to please let us know how we can create and set that query in POWL for all users?
thanks,
mahesh.

Dear All,
In Purchase order work list (POWL) need to define a new query and set it for all the users.
Request to please let us know how we can create and set that query in POWL for all users?
thanks,
mahesh.

Re:User group,info set and Query combination table

Hi,
I would like to know the combination table of User group,info set and Query.
Can any body please respond to my question?
Regards,
Suresh Kumar.

Hi,
Check the tables starting with AQG*.
Reward points if useful.
Regards,
Atish

Problem during the setting the query data source name in forms 6i

We are now doing assignments in forms 6i actually there is a problem during setting the query data source name in run time.
The problem is
declare
v_query varchar2(200),
begin
v_query :='(select empno,ename,deptno from emp where hiredate =' || control .value1 ||')';
go_block('emp');
set_block_property('emp',query_data_source_name,v_query);
end;
that bolded area is the problem that ia varchar value the single qoutes embedded with that value.how can i embedded single qoutes in that concatenation.
That is now query will run like select empno,ename,deptno from emp where hiredate =control.value
But we need like select empno,ename,deptno from emp where hiredate ='control.value'
Message was edited by:
Punithavel

Thanks for your response
We fixed the error
and the answer is
declare
v_query varchar2(200),
begin
v_query :='(select empno,ename,deptno from emp where hiredate = ' ' ' || control .value1 ||' ' ' ) ' ;
go_block('emp');
set_block_property('emp',query_data_source_name,v_query);
end;

Re: Info set and query transport under same request number

Hi,
I would like to know the details about info set and query transport from development to quality using SAP Query: Trnasport tool.my quesion is,
Can i create all info sets and related queries under same request number or will it be created in diffrent request numbers?Please respond any body to my question.
Regards,
Suresh Kumar.

No it is possible as per SAP.
Please read follwoing help-
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
It is talking abou the Special Features of InfoCubes in InfoSets.
For queries based on an InfoSet with an InfoCube, the system decides at runtime whether aggregates can be used for the InfoCube. This is the case if all the required InfoObjects of the InfoCube exist in an aggregate. The following InfoObjects are required:
The key figures of the InfoCube selected in the query
The characteristics of the InfoCube selected in the query
The characteristics required for a join with other InfoProviders in the InfoSet.
Furthermore, as a prerequisite for using aggregates, all the data required by an InfoCube must be readable using logical access. For an InfoCube within an InfoSet with InfoCubes, it is no longer possible to read part of the data from one aggregate and part of the data from another aggregate or the InfoCube itself.

Cannot set user query to view "{0}" because it is a destination in a view link

Hi
11.1.1.7 - I have 2 programatically view objects. I have created a viewLink between them and I am getting the error:
Cannot set user query to view "MyView2" because it is a destination in a view link.
Does anyone know what are the methods I need to implement? I have follow the Frank Nimphius Post: Oracle ADF: Service, Please! and it is working fine. However, after seeing this example: Decompiling ADF Binaries: Building programmatically managed business components - Part 2 - I realised that I am missing some other stuff to make the view link work. There are too many methods and its quite difficult to understand and digest all classes and methods etc.
Anyone can please point me in the right direction?
Regards

Which version are you using? Could you maybe turn on logging (http://blog.goverco.com/p/psmalogging.html) and post content of log file if you still have the issue...
Also, remember that even though you set credentials in the PARAM section, these values are overwritten by the ones specified on the properties of the MA - so make sure that you specify correct creds on the MA. Specifying creds directly in the script makes
for an easy way of testing from the PowerShell prompt, but not for running the script from the MA / Run Profiles
Regards, Soren Granfeldt
blog is at http://blog.goverco.com | facebook https://www.facebook.com/TheIdentityManagementExplorer | twitter at https://twitter.com/#!/MrGranfeldt

Programmatically setting SQL Query string?

Post Author: JoeM
CA Forum: Data Connectivity and SQL
Hi,
I recently updated to Crystal Reports 11 from 8.5 and am having some problems getting my reports to properly function. I need to set the SQL query string in the report at runtime in our C++ based program when the user selects what report they want to print. So to do this I first open the report and connect to our database and that works fine, here is the code for that -
pReport = pCRPApp->OpenReport(TmplFName, dummy) ;
pReport ->Database->LogOnServer("crdb_odbc.dll", ODBC_FILEDSN, DatabaseName, DatabaseUsrNm, DatabasePwd);
but when I use PutSQLQueryString to set the custom sql query that I've made it does not appear to work because when I use GetSQLQueryString right after that, the returned string is not the one I just set. Here is the code for that part -
pReport->PutSQLQueryString(SQLExprBuf);
sprintf(TestSQL, pReport->PutSQLQueryString());
TestSQL is not the same as SQLExprBuf
So my question is how do I properly set the SQL query string programmatically, is there some setting in my report that needs to be turned on or am I using the wrong function? I read somewhere that you can use the Add command option in the report to set the query string as well, is there a way to programmatically do that?

In Access create a View showing the information you want, then in design mode click View, SQL to see teh SQL you need. now make sure the SQL you build in VBA is exactly the same. so in the Immediate window type a ? then copy paste your code then press Enter
to see the result, EG:
?"UPDATE Lan_landmeter " _
& "SET OpleidingsBedrijf =" & bedrijf & " ,Opleiding_startdatum =#" & startdatum & "#,Opleiding_einddatum =#" & einddatum & "#,Aantal_opleidingsuren_vast=20,Aantal_gevolgde_uren
=" & gevolgde_uren & ",Aantal_resterende_uren=0" _
& "WHERE Id_landmeter =" & naam & ""
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

SAP POWL - set default query

Hi,
I am working on SAP travel and expenses component, and I want to set the default POWL query to All My Expense Reports instead of All My Travel Requests on the My Trips and Expenses Page.
The 'personalize' option provided will only change default query for my user, I want to personalize it for all end users. I tried Administrator personalization of Web Dynpro component but it won't work.
Any idea how can we change the default query within POWL. I checked SPRO configuration too (POWL_QUERY, POWL_QUERYR, etc), but none of them provides functionality to set default query.
Thanks,
Deepa Balani

Hi,
This might be (I'm not completely sure) that by running it once for the user with the old order it has then saved this order in the user's personalisations/preferences. I remember having issues when I was adding queries to applications that user's that I had previously used were not getting them. I think I resolved this by deleting all the saved POWL references for the user, I think this may have been personalization, but it also may have been other tables (sorry was a while ago). After doing this the issue was fixed.
To test if this is the case - I could suggest creating a new user id and logging on with that - check if the problem is sorted for that user first - if it is then go down the path of trying to remove saved preferences for your existing users.
Hope this helps,
Chris

Multiple Users accessing the same core set of queried data

Hi. We have a small call center and we want to build an app where the users can query the same core set of data and use it to initiate calls to study participants. The trick is that they will also need to update each record with information from the call. So we need to stop two call center agents from potentially calling the same participant at the same time.
Is there a good method or best practice for creating a app to do this? The concern is that multiple call center agents would be querying the screen with the same core set of records (for example, querying by 'Ready for Call' status). When a call is placed the agent will have a conversation with the participant and ultimately end up updating the record after about 10 minutes. So my question is whether there is a good way to keep multiple agents from working with the same record (e.g. calling the same participant simultaneously)?
Right now it seems that Oracle will lock a record for update, but only after an agent has initiated a change to the record. This still leaves a window of opportunity for two or more agents to be calling the same participant at the same time.
Any thoughts or ideas on this would be greatly appreciated. Thanks so much.

By 'standard record locking system' do you mean there is nothing I need to do programatically? No block level properties to change?
So you are saying this is just the way it always works. So as soon as one of our call center agents opens a record all I have to do is create a pending update to any field?
But won't another user be able to open the form and just query that record not knowing another user has it open?

Help Needed in Set based query

Hi,
Version : sqlserver 2008 R2
sample data to play with,
declare @Address table(Id int primary key identity(1,1),Address varchar(100),city varchar(20),State varchar(20))
insert into @Address
select '123 sheril street, Newyork,NY','Newyork','NY' union all
select '333 bamboo street, Manhattan,NY', null,null union all
select '123 merrit street, Albany,NY','Albany','NY' union all
select '123 shego street, Buffalo,NY',null,null
This is just sample data. i have around 100000 address for different city and states.Basically i need to remove the city and state from address
Here is what i need to achieve,
1. Get the city,state check exists on address column if found then remove the city and state. if not leave it as it.
2. If the city and state column is null and if that is present in address column then remove that from address column and update it in city and state column
respectively.
Is this possible to achieve without cursor or looping? any sample query please .
loving dotnet

This gets you part of the way there. You'll have to perform your own logic to determine if you want to update the address field or not. I attached a split function that I found online, you'll need that to get the desired results.
declare @Address table(Id int primary key identity(1,1),Address varchar(100),city varchar(20),State varchar(20))
insert into @Address
select '123 sheril street, Newyork,NY','Newyork','NY' union all
select '333 bamboo street, Manhattan,NY', null,null union all
select '123 merrit street, Albany,NY','Albany','NY' union all
select '123 shego street, Buffalo,NY',null,null
;with parts as
select a.Id, LTRIM(RTRIM(ISNULL(foo.Item,''))) as Item
from @address a
CROSS APPLY DBO.SplitStrings_Moden(a.Address, ',') as foo
[rows] as
select id, [1] as [Address], [2] as [City], [3] as [State]
FROM
select Id, Item, ROW_NUMBER() over(partition by id order by id) as rowNumber
from parts
) a
PIVOT (max(Item) for rowNumber in ([1], [2], [3])) as pvt
merge into @Address as Target
using rows as Source
ON (Target.Id = Source.Id)
WHEN MATCHED THEN
UPDATE SET
Target.Address = Source.Address,
Target.City = Source.City,
Target.State = Source.State;
select * From @Address
ALTER FUNCTION dbo.SplitStrings_Moden
@List NVARCHAR(MAX),
@Delimiter NVARCHAR(255)
RETURNS TABLE
WITH SCHEMABINDING AS
RETURN
WITH E1(N) AS ( SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1
UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1
UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1),
E2(N) AS (SELECT 1 FROM E1 a, E1 b),
E4(N) AS (SELECT 1 FROM E2 a, E2 b),
E42(N) AS (SELECT 1 FROM E4 a, E2 b),
cteTally(N) AS (SELECT 0 UNION ALL SELECT TOP (DATALENGTH(ISNULL(@List,1)))
ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) FROM E42),
cteStart(N1) AS (SELECT t.N+1 FROM cteTally t
WHERE (SUBSTRING(@List,t.N,1) = @Delimiter OR t.N = 0))
SELECT Item = SUBSTRING(@List, s.N1, ISNULL(NULLIF(CHARINDEX(@Delimiter,@List,s.N1),0)-s.N1,8000))
FROM cteStart s;

Characteristic "Master Data" setting in Query definition not working?

Hi,
I am having a problem with a query definition. (BI 7.0)
The query comprises the following definition which relate to displaying Milestone dates for respective projects in a time series so the dates are populated in the correct column in a time series:
Filter
Project Definition = Fixed Single Project Definition
Fiscal Year Variant = K4
Project Profit Centre = Hierarchy Node
Project Plant = Fixed Single Value
Free Chars
Network
Network Activity
Activity Element
Rows
Project Plant
Project Profit Centre (With hierarchy)
Project Definition
Milestone Type (Setting in characteristic to pick up Master Data)
CSR Relevant    (Setting in characteristic to pick up Master Data)
      Structure
           Actual
           Scheduled
    (Actual: Value type = Actual, Origin = Manual ,Event = Start)
    (Scheduled: Value type = Actual, Origin = Scheduled ,Event = Start)
Columns
Key Figure structure of 12 key figures in a time series
Selection
Key Figure = Date
Fiscal Year/Period = Current Fiscal Year / Period (SAP EXIT) (With Offset 1 to 12)
FYI
When I run the above it comes back correctly. However when I add "MILESTONE" (Characteristic setting (Posted Values) to the Query Definition immediately after the "Milestone Type" and before CSR it does not work it just is hanging for a considerable time.
I am not using "Master Data" for the "Access Type for Result Vales" for the additional characteristic "MILESTONE" just "Posted Values".
I was expecting that it would just show all Milestone types as per Master Data but just the Milestones that are posted for this result.
I would appreciate a solution to this issue and an explanation to why it hangs when I add the "MILESTONE" characteristic to the definition as explained above.
Thanks in advance..
Stevo

Hello there,
Putting Milestone in the rows in the query definition is not being hang there (i.e., while creating and saving the query) right?
It is stucked while executing the query isn't it so?
That's because you have too many records to be desaggregated by milestone characteristic, and this is indepently of posted values in the characteristic settings.
Putting milestone characteristic in the free characteristics will allow you to run the query, but desaggregate it (add it to the rows) will be to much information to read from your dataprovider (this is just a guess).
If it is being stucked in query execution whike milestone is in the rows. Try this for example:
Add milestone to the free chars. Execute the query. Filter milestone characteristic while still in the free rows and choose a value that you are pretty sure has the smallest records in the Dataprovider (could be for example value #). Than drill down milestone to the rows. You'll see that it can be executed without any problem.
Diogo.

Can we set the query timeout value in a global control place?

hi everyone,
We use the FullTextSqlQuery class to do query stuff, but we have the query timeout issue, the query sometimes timeout, sometimes is normal. I know there is a property from Query class called Timeout, and the default
time is 15 seconds, but we have lots of code involving FullTextSqlQuery.
I want to know is there a gloabal place like the web.config or regedit or somewhere to set the timeout value?
Thanks

Did you ever get an answer? I'm in the same boat...the only way I can seem to not charge tax to my wholesale clients is to set "tax never applies". But I got over 300 products...how can I do it "en mass"???
Anybody??
I tried creating a special tax code at 0% but that didn't do it either.
thanks in advance,
Scot.

Airplay set up query.

Similar Messages

Maybe you are looking for