Airport BaseStation's name does not appear in list of workgroup's members

I have a windows workgroup called NUCFAM with two PCs running XP Pro in it.
I have replaced my linksys router with an Airport Extreme Base Station to which I have attached two printers and a disk. I have configured the AEBS to have the Airport Extreme name "celery" and I have configured the AEBS to be in the workgroup NUCFAM by using the Airport Utility>Disks>File Sharing panel.
On Windows, where I have installed BonJour, each of my printers is listed as located at celery in the printer's properties.
However, in Windows Explore>Tools>Map Network Drive if I click the Browse button
a dialog appears that lists, under a node labeled NUCFAM, the names of my two PCs but not the name of the AEBS, i.e. celery. Instead the AEBS is named by the same twelve hex digits that Airport Utility lists as its Ethernet ID.
And in a CMD shell
net view \ \celery
fails to find the network path. However,
net use \ \10.0.1.1
does find the AEBS and lists the disk's name.
Can I get the AEBS to appear on the Windows side with the AEBS's name?
Thanks.

I just found the answer on the discussion board.
In my SETTINGS I had compilations turned on.
When I switched it off, Carly Simon was back in my
ARTISTS list.

Similar Messages

Contact name does not appear after upgrading to iOS 5

I recently upgraded to iOS 5 and after doing so, contact name does not appear when someone calls; but text messages the name appears. I have saved all my contacts under +9 format.

This indicates that the phone was carrier locked and had been 'hacked' to unlock it. Updating the phone has re-locked it to the original carrier.
ONLY the carrier it is locked to can authorize unlocking it. Not all do so. Contact the carrier and find out what their policy is.
If it's locked to AT&T, you may as well sell it and buy a new phone. AT&T will not unlock iPhones for any reason.

CDs loaded, Artist name does not appear in ARTISTS list

Among all the CDs I've loaded and songs purchased, I have 2 Carly Simon
CDs on my video iPod. However, Carly Simon's name does not appear in my
list of ARTISTS in the Music Menu.
I did a sync with my iTunes list and the songs are indeed loaded.
Why is her name missing from the list and how do I get it back?
It used to be there!
Thanks-

I just found the answer on the discussion board.
In my SETTINGS I had compilations turned on.
When I switched it off, Carly Simon was back in my
ARTISTS list.

Steady green light on A1084. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it. Is there a fix?

Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete. Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier. Is there a fix?

I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp. The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express. It would be nice to play Airtunes while simultaneously accessing the Internet. I don't understand your question about what program I am using for which I require AirPlay. I am not learned about computers in general, and even less so about Macs than PCs. I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier. I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo. I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

Epson DX5000 driver does not appear on list in'print using' box

Epson DX5000 driver does not appear in list despite the fact that I have downloaded the software.
When the printer is connected and I try and print I first go to 'add printer' in the print dialogue window. This takes me to the printer browser where the Epson DX5000 appears - at this starge I can't add as this option is not highlighted. Instead I have to go to 'print using' where I click on Epson - this is where the problems start as the DX is not on the very long list.

Hi Ali
Yes I have installed the software
I have been using another printer so I realise that I don't need to add printer each time - this is the first time using this new printer
After I 'add printer' I am taken to the printer browser where the RX5000 is listed (this is in the default browser mode) when I then click the RX5000 the name and location appear in the appropriate boxes but I am unable to press the 'add' button. I have to go to more printers where I then go on to look in the epson folder.
this is where I get stuck as my printer is not listed

Silverfast scanner does not appear in list of available scanners in 'import'

silverfast scanner does not appear in list of available devices in 'import' (elements 12)

First of all, have you installed the TWAIN driver?
TWAIN not installed | Photoshop Elements 9 and later

Airport Extreme connected drive does not appear in Time Machines drive list

I have two Macbook Pros. Both have 500GB hard drives. I have an airport Extreme with a WD terabyte hard drive and a HP printer attached via USB cable. Both Macbooks can access the WD HD & internet.
One MacbookPro has time machine set up to use the Terabyte HD as backup.
I want the other MacbookPro to also use this terabyte drive for backup.
But when I try to set up Time Machine to use the drive, the drive does not appear in the backup drive list.
What can I do to fix this? I had a HD crash on the non-backed up Macbook recently. I desperately need it to be backed up!
Any ideas?

Does the drive show in Disk Utility? Try a restart.

When receiving a call on my iPhone 4s the contact name does not appear

when receiving a call on my iphone 4s the conact name does not appear

This should fix it:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again to verify that it's fixed.

Yahoo toolbar appeared without my consent. Can't get rid of it. Does not appear in list of add-ons or in list of programs installed for uninstall. (Win7; FFx5) Please help me delete this annoyance.)

I was prompted to update Java. I got a YAHOO toolbar which I did and do not want. I can't get rid of it. It does not appear on the Add-on list, not in the programs list (to uninstall). Can't find anything with Yahoo in the name. I do not want to use View, because it keeps coming back into view without my consent -- I want it gone permanently.
The uninstall directions in Yahoo help call for click on pencil tool (which tool is not found on this toolbar). Firefox instructions say go to Add-on list, but the Yahoo bar is not there. There are several Java add-ons, but I don't know what they are and what happens if they are uninstalled.
Win 7; Firefox 5.0; Yahoo toolbar ver 2.3.8.20110620112826
Perhaps it is disguised as something else. If so please tell me what to uninstall.

Try RIGHT clicking on different areas of the toolbars on Firefox, mainly try right clicking on/around the url bar & forward/back navigation buttons. When you get the correct spot if will give you a menu with the toolbars available (whether or not they're active) and a couple other options. Just uncheck the Yahoo one & you should be all set.
As you say though it may be some other bar disguised as a yahoo bar. Any chance you can get a screen shot of it & post it here?

Purchased ringtone does not appear in list in settings/sounds/ringtones

Hi I bought a ringtone on my iphone today and I can see it in the purchased downloads, and I can see on my MacBook after sync, but it does not appear in the list of ringtones on my iPhone, so I can't set it as my default. Can anyone tell me how I find this purchased ringtone and set it as my default ring?

I pressed the itunes icon on my iphone, up came the title screen, and one of the offerings on it was "Ringtones RCP Ringtones 1.0" you either buy the full library of the tones for $3.99 or just one for .99, which is what I did, I found the one I wanted (it sounds like a British telephone with that double ring-ring) and hit the buy button. It asked for my iTunes password which I gave, and then it downloaded. In other words, exactly like any other itunes song does.
Now it's sitting on my iphone in the downloads file. When I couldn't get it to appear in the settings/sounds/ringtones section so I could choose it, I thought maybe I should do a sync with my itunes on my computer, so I did that, making sure that "sync ringtones" was checked. Now there is a new file on my computer itunes called "Purchased on [my name]'s iPhone" however there is nothing in the ringtones folder on the computer itunes, and I've tried dragging it out of that purchased folder into the library and into the ringtones folder and it won't go in.
I can play it on my phone, and I can play it on my computer. it appears like any other song on itunes. but I can't make it become the ringtone on my phone!

Boot DVD does not appear in list on Option Restart

Greetings - I am attempting to run Stellar Partition Manager to adjust two partitions on my SSD drive. I have setup a dual boot configuration where 10.6.8 as well as 10.7.2 reside on that SSD drive in two separate partitions. To adjust the partitions I must restart the workstation from a Boot DVD created using that software, however after restarting while holding down the Option Key, the DVD disc does not appear as one of the choices in the bootable drives list. I believe the DVD drive is functioning properly as I routinely use it to read and write discs, including loading software. I have reset the PRAM, but that has had no affect. So far I have not received knowledgable support from Stellar, and have kind of gotten the run-around. I am hoping I can independently work around this issue. Thanks for any thoughts. Scott

Hi Larry,
According to your description, my understanding is that the Edit web part option disappeared in the list web part.
I recommend to check if the account has permission to edit the web part, please check the permission of the account in Site Permissions and the list permissions.
Please also check if the target audience is set in the web part.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Substitutions - field does not appear in list of 'substitutable fields'

Specifically, I would like to use a exit substitution to replace the content of the Structure PRPS-POSID field.
However, I cannot seem to use a simple substitution rule (since PRPS-POSID does not appear as a substitutable field in the PRPS list of fields that pops up when creating a 'Step'). Most of the PRPS field are availed as 'substitutable fields' but not POSID.
The user exit approach is proving difficult since I cannot add the following code unless I put in a data or tables statement (which is NOT recommended).
If proj-PSPID(7) <> prps-POSID(7) .
prps-posiD(7) = PROJ-PSPID(7) .
ENDIF.
Please help!

Hello Shrikant;
The requirement is to ensure that the WBS element numbering (prps-posid(7) ) will always match that of the Project Definition (proj-pspid(7) ). This numbering rule is required to comply with the Fund Centre numbering since the fund center number utilizes the Project Definition number as an identifier ( I will email you some screen prints).
If there is a discrepency between the WBS element numbering (prps-posid(7) ) and the Project Definition (proj-pspid(7) ) number, the requirement is to assign Project Definition (proj-pspid(7) to the WBS element numbering (prps-posid(7) . The transaction used to call the substitution exit is CJ20N.
A big thanks for your comments so far.
Peter Forster.

App does not appear in list of apps to sync

Help! I downloaded an app that is in the genre of Education. When I click on the device (iPod Touch), this app does not appear in the list of apps that I can select with a checkmark in order to sync from iTunes to the iPod. Also, when I display the apps in my iTunes library, the app is on the list, but I cannot drag it to the device. I can add other apps (games, etc) to this device using either of these procedures (syncing or dragging).

Is the app compatible with your model iPod?

IPhone does not appear in list of devices in iTunes in the cloud

my iPhone does not appear in the list of devices

Hi, cdv2007.
Here are some helpful troubleshooting steps I would recommend going through when your device is not recognized on a Mac.
Note: This article is for Mac OS X users. If you're using a Windows PC, please refer to these troubleshooting suggestions.
Follow these steps to resolve your issue:
Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
Install software updates on your Mac.
Note: If an iTunes update is available, apply the update.
Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Restart your Mac.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
If you are experiencing the issue on Mac OS X 10.6, try the steps in the article below.
Mac OS X v10.6: iOS device not recognized in iTunes after restart
http://support.apple.com/kb/TS3540
Cheers,
Jason H.

Cannot sync app to my ipod touch - does not appear in list to sync

Hello...
I am having a problem. I downloaded an app to my ITunes, but when I click on my ipod touch and go to Apps, it does not appear in the list.
I don't know if this contributed to the problem, but I had to create a different user account (the one I am using now) to get the None option to show up instead of having to enter a credit card to get a free app.
The app I am trying to get is See. Touch. Learn. by Brain Parade.
Kim

Thank you so much! what a swift reply - I am amazed! but my main problem is trying to transfer an app bought in iTunes to my desktop Mac. I thought 'seeing' the iPod in Devices would make it easier, but I am stuck... Can you help?

Airport BaseStation's name does not appear in list of workgroup's members

Similar Messages

Maybe you are looking for