Airport dual enet snow and usb 802.11g wireless usb adapter

Can I use a wireless 802.11g adapter with my imac (iLamp)to connect to my snow base station, or bo I need ans xxx.11g /b adapter?

Sorry - I missed that from the title of your message.
The answer to that question is no - an exclusively 802.11g USB wireless adapter will not be able to connect to a Snow Base Station. I'd be surprised if this was ever an issue - I don't know of any exclusively 802.11g USB wireless adapters that work with Macs.
I suggest you avoid use of USB wireless adapters with Macs. Yes some people have used them successfully, but still more people have nothing but grief with these devices. Very, very few USB wireless adapters have any MacOS driver support in the first place.

Similar Messages

Netgear WG311v3 802.11g Wireless PCI Adapter

I have a G5 Tower with PCI slots.
Is there a way to make this wireless card recognized as an AirPort card under OS 10.5.8?
Currently, it does not even show up System Profiler.

Just google "Netgear WG311v3 802.11g Wireless PCI Adapter". Apparently it supports Windows OS's. You can also inquire from the manufacturer.

Can I use an airport express to extend a Cisco E4200 802.11n or 802.11g wireless network?

Can I use an Airport Express to extend a Cisco E4200 802.11n or 802.11g wireless network? I'd like to improve access in a dead spot with an airport express. I know I can connect this wayt for airplay, but how about extending the signal?
Thx! ACB

Apple's "extend a wireless network" function appears to be a proprietary feature that works only with other Apple AirPort routers. As far as we know, this feature is not compatible with devices from other manufacturers.
It would be extremely unlikely that the Express could do what you want, but some things are never known until you try.

Will 2800-400 BIOS update enable 802.11g wireless LAN?

I recently bought a Belkin 54G cardbus wireless adapter for use with my Satellite 2800-400, which has a Windows ME OS.
The setup software wouldn't install a driver, even though ME was said to be supported.
I wrote to Belkin and they told me that it was because the laptop BIOS didn't support 802.11g wireless and that I should update the BIOS. I updated to BIOS version 2 but it didn't make any difference.
I don't know if Belkin's instructions were on the right track or whether they were they just pushing the responsibility as far away from themselves as they could.
Please can anyone tell me if my laptop does support 802.11g wireless, with or without the BIOS upgrade?
TIA
Mike

> Hi
>
> Im not 100% sure if your notebook supports a
> wireless LAN connection because I dont found any
> informations about it.
Thanks for the reply. the notebook does support wireless LAN because I can get a 802.11b card to function OK.
> But as far as I know its not
> necessary to update the BIOS therewith the Wireless
> card works.
Well it's done now so there may be other benefits. Not 802.11g wireless though it seems.
> I recommend to contact the service partner. They have
> more detailed informations about this unit.
Thanks I'll try to find and contact a service partner.
Mike

Belkin 802.11g wireless USB2.0 with Snow White G3 - A question...

Will the Belkin 802.11g work with an iBook model M6497 snow white iBook running OSX 1.2? I have been hunting around the forums and net trying to find out if it would work and can't find out if it would work or not. We are on a tight budget and can't afford the current prices for the original airport card.
Any help would be greatly appreciated,
Rich and Lily in Philly
G3 iBook Model M6497 Mac OS X (10.2.x) Burnt out Ethernet card, tight budget - any help would be great.

Looking at the accessories for Mac portables, there is no USB adapter compatible (most likely due to there being no Mac driver). The Ethernet bridge seems like the only option, though it's out of stock at the moment, but seeing that you have a non-functioning Ethernet port, I guess that'd not work very well.

Trying to set up 2 Airport Extremes to replace my old 802.11g pair.

Hello...
I am trying to set up my extended Airport Extreme network with new Extremes to replace my older 802.11g pair.
Here is the situation: I have Cable 'net access that comes into my studio. It is then wired to the "Studio Extreme" into the WAN port. Then there is an Ethernet wire from the Ethernet port to a hub, which is wired through the wall to hub 2, that goes apx 500ft via CAT6 to my house. Then there is another hub that wires all the Ethernet ports in the walls of the house. Out of one port is AirPort Extreme # 2.
The Problem:
My old AirportExtreme #2 works fine. The new one won't play nice.
The Studio Airport is set to: Create A Wireless Network with WPA2 Personal security. It is happy with a green light.
The New AirportExtreme 802.11n is set to: Extend a wireless network with WPA2 Personal Security. It says Connect using: Wireless network.
I have tried to set it up with the Ethernet cable going into the WAN port, and the Ethernet port. When it is in the WAN port, it says "nothing is in the WAN port". When it is in the Ethernet port, it says It can't find the network. I have tried unplugging everything and turning it back on, in reverse order etc. When I bring the New Extreme #2 to the studio, it plays nice, but I suspect it is working wirelessly with the Studio Extreme. (?).
I have tried to set it to "Create a wireless network" as I have seen suggested in some forums. Still doesn't make it happy.
I also tried to let the software " replace the old Airport with the new Airport" . that didn't work either.
The Old Extreme 802.11g still works and is happy also. Its cable is plugged into the Ethernet port and it transmits throughout the house.
I am going nuts trying to get this to work! Why does the old one work and not the new one?
HELP!!!!
Thank you!

You got ahead of things here (and chose the wrong settings), but we can correct things.
Reset the AirPort Extreme again, please.
Then open AirPort Utility, select the AirPort Extreme, and click Manual Setup.
Click the Base Station tab under the row if icons to name the AirPort Extreme, assign a device password and adjust Time Zone settings.
Now, click the Wireless tab next to the Base Station tab and adjust settings as follows:
Wireless Mode = Create a wireless network (Extend is used only if you connect using wireless...and you are connecting using Ethernet)
Wireless Network = Same name as your "main" AirPort Extreme
Enter a check mark next to Allow this network to be extended
Radio Mode = Automatic
Radio Channel = Automatic
Wireless Security = Same setting as the "main" AirPort Extreme
Wireless Password = Same password as the "main" AirPort Extreme
Confirm Password
Click the Internet icon, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update and wait 25-30 seconds for a green light
Very Important......Power off the entire network and wait a minute or two
Power up the modem first and let it run a minute by itself
Power up the "main" AirPort Extreme the same way
Power up the "remote" AirPort Extreme the same way
Continue powering up devices one at a time until everything is powered up
The network should now be functioning correctly.

AirPort Express Base Station and USB Webcam

I see that the AirPort Express Base Station has a USB port. Is it possible to connect an off the shelf USB webcam, maybe from Microsoft or Logitech, to the AirPort Express Base Station USB port and use it as a wireless surveillance system? Of course you would need proper monitoring software. You could have an AirPort Extreme Base Station connected to your network and several AirPort Express Base Stations with USB webcams attached keeping track of say your home, your business, etc... If you had the correct monitoring software, you could view any motion triggers from let's say your iPhone. The monitoring software would work with both Mac and Windows. Great idea right? Is this idea even feasible? If so, how? If not, why not? I'm just trying to figure out a way using standard off the shelf USB webcams. Any suggestions would be helpful and I thank you in advance.

Well your best bet would be to get a wireless webcam! Cisco makes a great one as well as D-Link! Here are a few models:
D-Link DCS-1000W 802.11b Wireless Webcam
D-Link DCS-930L Wireless N Network Camera
Cisco-Linksys Wireless-N Internet Home Monitoring Camera
Good Luck! -Josh Jones

Connecting AX (802.11n) and AX (802.11g) to create WDS

Hello I'm currently trying to connect my new Airport Extreme (802.11n) to my old Airport (802.11g)
in the aim of extending my network. So I would like to have the 11n as my main.
and 11g as a remote I think?
can anybody give me a step by step on how I would go about this on Airport Utility?
I think my main problem is that my old Airport is connected to a different network.
Kyle

You would need to configure the 802.11n AirPort Extreme base station (AEBS) to operate in an 802.11g compatible mode. You would need to configure one AEBS to operate as a WDS main. You would need to configure the other AEBS to operate as a WDS remote (or relay). An Unfortunate side effect of WDS is that each link cuts your available wireless bandwidth in half. Therefore the maximum wireless bandwidth achievable is 1/2 the 802.11g rate.

Airport express with Snow and wired Mac Mini?

Hi,
I am trying to help my parents set up airport express.
They have a Mac Mini with no wireless card connected by ethernet to a Snow base station. That is fine, and computer sees the base station in Airport Admin. However, when I try to go to Airport Setup Assistant to set up the Airport Express, I get a message saying that the computer doesn't have a wireless card (which I know) and doesn't allow me to continue.
Is there a known thing where you can't use Airport Express with a Snow base station without a wireless card? Any insight would be greatly appreciated.
Thanks!

Nevermind, I guess I answered my own question.

Deskjet 460 802.11g wireless setup on Win7

{Personal Information Removed}
There has to be someone in HP who can explain clearly how to set up a Deskjet 460 with 802.11g card in "infrastructure" mode on a router, using Win7. Surely!
The 460 was not fully supported on Win7, but Win7 has a driver which works with a USB cable. The challenge is how you get an infrastructure network profile into the 802.11g card when the tools on the Starter CD are XP-only - actually, even if they were to work on Win7, they have disappeared from the HP website, so you cannot download them.
Looking at a previous thread (http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Issues-with-DeskJet-460-WiFi-and-Windo...), lots of folks are as frustrated as I am, but nobody has so far answered the key question.
Before dumping XP I created a network profile on a USB stick, using the Starter CD - this was an xml file in a folder named SMRTNTKY. It was supposed to allow me to replicate the settings on other printers (or on mine if I lost the settings). Now, it is not recognised by the printer, but I have no idea why. I have cleared the profile, inserted the USB stick, powered off and on, with no change - the printout still shows the network profile as ad hoc / hpsetup.
I and others need a clearly documented process for creating an infrastructure network profile and for getting it into the printer, so we can use the device with Win7. If this needs software, we need that software to be available for download from the HP website, ideally via links from the reply (since the website is a bit of a mess to navigate. Please help.

Hi,
Assuming you have WiFi connectivity on your laptop, try setting a temporary ad hoc connection and then use the EWS to connect the printer to your router as a workaround, such a software is not available for Windows 7:
Follow these steps to install the product on the network with the Windows 7 printer driver.
Turn the product on.
Insert the wireless printer card into the printer.
Reset the wireless network settings on the product:
Reset all of the 802.11 wireless profiles: Press and hold the Power button ( ), press the Cancel ( ) button two times, and then press the Resume button ( ) eight times. Release all buttons.
Click the Wireless icon on your system traym then connect to the HPSETUP netowrk.
Wait two minutes for the printer to obtain an IP Address, and then print a wireless configuration page:
Make sure the product is on and idle.
Press and hold the Cancel button ( ) for more than two seconds. A wireless configuration page prints.
Locate the IP address / URL printed on this page, type it into your web browser to access its EWS page.
Open the Network / Wireless tab, click the Wireless option or the Wireless Setup Wizard and follow the steps to connect the pritner to your router.
Press and hold the Cancel button ( ) for more than two seconds. A wireless configuration page prints. note the listed IP.
Right click the USB printer icon within Devices and printers, select Printer Properties. Within the Ports tab create a new Standard TCP/IP port and type the listed IP for this port.
Hope that help, I cannot guide you further within the EWS as I do not have the exact device but you should locate it within the networking area of the EWS
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Help with wireless router and usb adapter

I have a model WRT54G2V1 and a USB adapter. They were working fine until about 3 months ago, then suddenly I couldn't connect to the internet. I began using my wife's computer for my email. I have a web site that I need to update. I spent 2-hours with Tech support today and they could not help me. The error messages say "cannot find access point" and then sometimes "cannot connect to internet". I think it may be my computer, but am very unsure. I have unistalled and reinstalled with no luck. Can anyone help me, please? I'm lost and not good with this stuff. Thanks.

In your computer click on "start" then "connect to" then "show all connections". You should be seeing two icons under "lan or high speed internet" Your wireless connection should showing a blue screen while the lan should be greyed out. If the lan is showing a blue screen right click on it and click on disable. Now try to connect using your wireless adaptor. If it did not work go to #2.
Disconnect wireless adaptor then go into programs and uninstall wireless adaptor program. Reconnect wireless adaptor to computer. The "found new hardware" should appear. Run the wizard and when it asks for drivers insert Linksys cd. Try to connect. You may have to click on repair if you don't succeed then try again. Go to #3
Powercycle your router. Try to connect. I have three computers connected wirelessly and the one farthest away from the router has problems connecting. Usually this solves the problem.
Greetings from Northern Ontario, Canada

Suggestion for the Dual mode analog and USB Headsets

For the next set of headsets can the USB adaptor be solid with out a cord that bends. I am expecting to have to replace my TACTIC 3D ALPHA's THX USB Adaptor because of broken wires but no complaints for the sound and headset only the adaptor.

Hi,
What caused the broken wires?
Did you purchase the headphones through Creative or from your local dealer?

Airport Extreme, Apple TV and USB Drive Speed?

I've just purchased a new airport extreme and 1.5 TB external hard disk. I figured out how to mount the disk and share it over my home network. I also designated a folder on the disk as my iTunes music folder (I purchased the airport and HD for the express purpose of achieving this set up, because I've accumulated so much media through iTunes that my MacBook Pro's internal disk has long since been full and I've been storing TV shows, movies, etc. on an external drive). The set up works -- BUT it is SLOW, especially when my Apple TV is syncing with iTunes.
Is there an optimal way to set up these connections so that syncing is not so slow?
Any help would be much appreciated!

HI and Welcome to Apple Discussions ...
*"internal disk has long since been full"*
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Insufficient available space, can cause performance issues, system corruption, and possible loss of data.
Carolyn

Airport Extreme, Win XP and USB Hard Drive - Please Help!

I have a macbook pro and it connected everything in a minute or two, my Win XP laptop can use the network...but I cannot see the attached Hard drive...on the Mac, no problem, but the PC doesn't see it...i must be missing something. Any advice?

So i download the Airport software (4.2?) and it tells me to use the latest software, so I download the update and it tells me that it can't update this version...i gotta tell ya, I am ready to take this thing back if i can't use it, the mac works so simple, but winblows makes everything so **** difficult...what am i missing? Where is the correct software to download?

Which HP notebook comes with a dual-HDD option and USB 3.0

the question is simple and I wonder why HP does not give a filtering mechanism on their webpages. I want a notebook that has an empty bay for a 2nd hard-disk and also includes a USB3.0 port. Do I need to go for a 17"option? Does it have to be a dv series (bad experiences in the past, cover replaced battery broken after a year and overheating issues)? It needs to create movies, and don't tell me I need to buy a Macbook instead....

USB3.0 is a pretty new technology and I have noticed that the new chipset Cougar Point supports it (Sandy Bridge laptops). You can also add an express card at any time to have bth 3.0 in a laptop..
http://www.amazon.co.uk/PCMCIA-Superspeed-Faster-Windows-Compatible/dp/B003F0QHL8/ref=sr_1_24?ie=UTF...
There won't be many non 17" laptops with 2 hard drive bay so eSATA might be a possible solution..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Airport dual enet snow and usb 802.11g wireless usb adapter

Similar Messages

Maybe you are looking for