Airport Express and hard driver

Hye,
I am looking for connecting a hard driver on my Airport Express to use it through wireless.
Is it possible? Could you explain how to manage it?
Thank you.

I'm also looking for this answer (using my usb port for my external hard drive and NOT for the printer).
Please contact me if you have information on how to do this. Thanks,
Dan

Similar Messages

  • HT4437 can i have more than one apple tv at different locations by ethernet on the same router  thinking of dumping the airport express and hard wiring an apple tv if this is possible

    can two apple tv's be used on the same network and router they would be in different locations one inside the house and one for an outside system?  may dump the airport express and go to ethernet wired direct to each apple tv from same router..   

    Welcome to the Apple Community da dad.
    Yes you can connect multiple Apple TV's by ethernet.
    What do you mean by outside.

  • How to access an Airport Express USB hard drive from a PC?

    I have a home network created by a new Airport Express base station (which replaced the previous AXBS that lasted 3 years and then died). Attached to its HSB port (with a USB hub) I have a WD USB disk and a Canon printer; I have another printer connected to one of the LAN ports. I have a mac attached to another of the LAN ports. Finally, my macbook connects to the network through the Airport. All peripheral items (disk, printers) work as they should from both macbook and the other mac.
    I also have a PC with WI-FI that connects to the internet through the AXBS. The printers seem to work on the PC (with Bonjour for Windows installed), and I can access its disk from the macs, but I cannot access the WD AXBS hard drive from the PC.
    The macbook and mac are running Snow Leopard and Leopard, respectively, and the PC is running XP SP2.
    Can someone offer a suggestion for getting disk access to work from the PC? Windows or not, it shouldn't be this difficult.

    Click here and follow the instructions, assuming you're using an AirPort Extreme base station. The AirPort Express base stations can't use USB hard and flash drives and will ignore any connected ones.
    (49618)

  • WDS with Airport Express & network hard drive

    I am considering getting an extra Airport Express BS to improve range of my current AX-based network. At the same time, I'm considering getting a network hard drive for everyone in the house to use for shared stuff. If I got this presumably I could connect it via USB to the new AX base station. Is this right? Is it sensible?
    Also, why don't I ditch the Apple products and get just one Belkin Wireless G+ MIMO Router F5D9230 with its claimed 1000 ft. of wireless range? Any views?
    Thanks
    D

    the usb port is for a printer, so it would not give network access to a hard drive connected to it (you need to connect the drive to a mac and share it from there)
    the belkin will only give significantly extended range with matching mimo cards in the client devices, so you'd need to do more than replace the ax with the belkin
    given that apple is already shipping hardware with next generation wireless chipsets (but no software to use the extra features) you might want to wait and see what apple does in january

  • Broken airport card and hard drive on MacBook Pro and can't go to recovery with LAN.

    Hi.
    My MacBook Pro 13" (early-2011)'s hard drive has broken, and I bought a Kingston 120GB SSDNow instead.
    Earlier, the airport card and cable has been broken too.
    Are there other ways I can use LAN to recover my mac? It wants me to use wifi, but the airport card is broken...
    If so, why does it only want to use Wifi instead of LAN?
    LAN is like the extra parachute just in case, or the extra octopus regulator in scuba diving.

    Is your model on the list? Did you ever upgrade its firmware? If not, then all you can do is start by booting from your Snow Leopard DVD and installing Snow Leopard on your SSD. Be sure to first partition and format the SSD for use with OS X. Once you install Snow Leopard you can download and install the firmware update for future needs.

  • AirPort Express and USB Drives

    Is it possible to connect a USB Disk Drive to an AirPort Express? When I tried just plugging it directly into the USB plug on the AirPort, my computer didn't detect it. Is there something special I need to do to be able to access it?
    MacBook Pro 1.83GHz Core Duo   Mac OS X (10.4.9)  

    AirPort Base Stations other than the 802.11n model don't support the use of the USB port for a hard or flash disk; that port is intended to be used with a printer.
    (22382)

  • Airport Express and USB Hard drive and extremely slow performance

    HI Guys,
    I seem to having a lot of trouble with an Airport express and a Lacie 1TB drive. While I have solved several problems by updating firmware and enabling journalling on the Lacie, I am still having problems with extremely slow performance with my macbook, particularly using itunes and Firefox.
    Any ideas and any further information needed?
    Regards
    BJDprivate

    BjdPrivate wrote:
    HI,
    I formatted it using the Lacie setup program for Mac and later enabled it for journalling using Disk utility. This seemed to solve a lot of the recognition problems I was having, however the I-Tunes and firefox performance is still atrocious. If I do Need to completely reformat it using Disk Utility, will I lose my files on the disk now?
    not if you move them to a temporary location before you start.
    yes, you are better of formatting the drive with DU.

  • How do i use airport as both time machine and hard drive? currently on Yosemite 10.10.1

    how do i use my 3TB airport time capsule as both time machine and hard drive? currently on Yosemite 10.10.1.....Many Thanks.

    Choose Computer from the Finder's Go menu and double-click it. If needed, use the Connect to Server command to log into it.
    (119763)

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • I wanted to know whether i can diffuse music to the bluetooth only speakers from a airport extreme-connected hard drive through my mac?

    I'm interested in the new soundlink mini Bose wireless speakers that function only via bluetooth. I wanted to diffuse music to them from an airport extreme connected hard drive through my macbook air. I don't want to stoc music on my mac given the limited flash drive and don't want to go though wires again. Is that possible? Also I can't go with airport express since those speakers don't have the airplay function.
    Thanks a lot for your help or ideas

    Hello jeri004,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Mac: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1449
    Best of luck,
    Mario

  • How to add Airport Express and USB 2?

    Hello all,
    I have a Titanium 1ghz that currently has no Airport. I'd like to add Airport Express and USB 2. I know I can do both via the PCMCIA slot, but only one at a time.
    (Before you say: Just add USB 2 via the slot, and then add a WiFi dongle via the new USB -- I need to use the Airport for Internet Sharing (the PB is going to be a slim little server/Airport hub), and I've never seen anyone (including me) succeed at getting an internet connection shared via a dongle.)
    FWIW, the main reason I need the USB 2 is to connect a pair of external hard drives. If I could connect the USB drives via the Firewire ports, I'd be all set. Are there adapters that would let me do this?
    Thoughts? They're much appreciated.
    SJ

    FWIW, the main reason I need the USB 2 is to connect a pair of external hard drives. If I could connect the USB drives via the Firewire ports, I'd be all set. Are there adapters that would let me do this?
    No, there aren't. But it would be simple enough to replace your USB-only external drive enclosures with enclosures that have FireWire ports. Just swap the drive mechanisms themselves into the new enclosures. FireWire would give you better speed than USB2, and if your enclosures have two FW ports (say, one FW 400 and one FW 800) and their own power supplies, then you could daisy-chain both drives on the Tibook's single FW port.
    Of course if you can get by without having the two drives connected at the *same time* as you're using the wifi connection, then a USB2 PC Card and a wifi PC Card (like this one) will serve you just fine.

  • Any software differences between new airport express and extreme?

    I was wondering if there are any features or configuration differences between the two, such as configuring VPN passthrough.
    The only difference I can see is using the USB for hard drive use.
    Also, do you think the performance will be similar.  I know the time capsule actually rated slower than the extreme even though they use similar hardware.

    You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

  • Airport Express and Seagate HD

    alright i am thoroughly confused. i have been to the Apple store and asked more than one prepubescent representatives and have gotten the same line. "yes you can". my question was can i use my AirPort Express and an external hard drive and use time capsule wireless? so what did i do? i keep my two AirPort Expresses (the older ones, being that my computer can't support "n" why go by a new one) and go out and get a seagate freeagent 500gb i plug it into my computer and do an initial time capsule back up and then try to configure my AirPort Utility for a HD, but ***, i can't. i look at old threds and everyone says "nope, only printers"
    so my question is. CAN I SET UP MY AIRPORT EXPRESS WITH AN EXTERNAL HARD DRIVE?
    has anyone had any luck? (i have heard stories) if so, how did you do it? all i want to do is be able to back up my computer and play music from the external HD. please help!
    thank

    RNinED, Welcome to the discussion area!
    CAN I SET UP MY AIRPORT EXPRESS WITH AN EXTERNAL HARD DRIVE
    No. The USB port on the AirPort Express (AX) only supports compatible printers.

  • HT4587 I was trying to change channels on my airport express and I hit "Forget" on the devices and now my computer can't locate the airport express device.  What do I do?

    My airport expresses are not showing up in my internet options.  I was trying to change channels between the airport utility and the airport expresses and they didn't reset properly.  I then hit "forget" on the options...now they are no longer visible.  It's a nightmare.  How do I get them back?

    There are three Airport resets, soft, hard and factory default.  It would probably be beneficial if you tried each one in sequence.  Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

  • Problem with Airport Express and HP PSC 1410

    Please I really need help. I just bought a HP PSC 1410 (all in one) and I connected on Airport Express and I can't print trought it. I tried to connect it by USB and it work perfectly. When you want to had the printer in printer utility you can find the right driver for the printer. Rendez-vous can find it but you can not install it...
    I tried many different way but it never worked.
    please help me ???

    I suggest you return the PSC1410 for refund, or for credit towards the purchase of another printer. This printer will not work when connected via an Airport Express. When you purchase your next printer, chose one found on the unofficial compatibility list at http://www.efelix.co.uk/tech/1013.html
    In general, all-in-one printers are poor choices for connecting via an Airport Express. Even if you do get them to work, you can only make use of their printing function.

Maybe you are looking for