Airport express is green but not showing up

My airport express used to work awesome, when my timecapsule was hosting the wireless.
My time capsule died, and now my airport express doesn't work.
I have done a thousand resets, and eveytime i set it up witout any trouble. Then after a couple of hours it stops working, despite the green light is still on. Now i have a ZyXEL P-2601HN-F1 as a router.

Hi Carolyn
Thanks for your reply. I'm running 10.6.4.
Unfortunately - no luck with that solution. The Kitchen Airport Express also does not show up in the air tunes on my Apple TV.
I have had no problems with getting airport expresses to show up in air tunes before adding this Dlink to my set up - I think it is something to do with the fact that the DLink is plugged into my Airport extreme. (I have tried DHCP off and on).
Thanks

Similar Messages

  • Airport express is green - but not showing up in AirportUtility or AirTunes

    Hello everyone
    I have an Airport Extreme as my main base station upstairs. I have recently plugged in a Dlink615 using an ethernet cable to give me wireless signal in over my kitchen downstairs. This has worked well and we can all use our laptops etc. in the Kitchen now.
    However - I have an Airport Express plugged in - in the kitchen, and have configured it to join the wireless network being pumped out by the Dlink - all seems to be well - the Airport Express appears to connect fine and go green - but following this, the Airport Express can not be found by the Airport Utility and does not show up in AirTunes.
    Can any one offer any advice?
    Thanks very much.

    Hi Carolyn
    Thanks for your reply. I'm running 10.6.4.
    Unfortunately - no luck with that solution. The Kitchen Airport Express also does not show up in the air tunes on my Apple TV.
    I have had no problems with getting airport expresses to show up in air tunes before adding this Dlink to my set up - I think it is something to do with the fact that the DLink is plugged into my Airport extreme. (I have tried DHCP off and on).
    Thanks

  • My Airport Express is green, but my computer does not find it on a scan.  I have used it before, but it just stopped working.

    My Airport Express is green, but on a scan, my computer does not find it.  I normally use it to play music from my Itunes to my house stereo speakers, and the icon shows up in itunes.  it stopped working and now my computer does not recognize it.  Help!!!  I hate listening to music on small speakers.

    Hello there Karen,
    It sounds like you are having to power cycle your modem to get internet back every single day. We can start by troubleshooting your Airport Express to help isolate the issue. I would first perform a Soft Reset, then test the issue again. If needed as a last resort I would then perform a Hard Reset:
    Soft reset
    Connect the device to power and wait for it to complete its start up process. To learn more about the start up process, please see All about Wi-Fi base station Status Lights (LED).
    Press and hold the reset button with a pen, pencil, or straightened paperclip for 1 full second, then release it. The light (LED) will begin flashing amber, indicating that the device is in soft reset mode.
    From the AirPort menu bar item, choose the network created by the device (the network name does not change).
    Open AirPort Utility from Applications > Utilities.
    Select the base station, then click Edit (The Edit window will indicate that the base station is in Soft Reset mode).
    Move through the tabs to make changes to your passwords or other settings as needed, and click Update and Continue as required
    Quit AirPort Utility.
    Hard reset
    Press and hold the reset button with a pen, pencil, or straightened paperclip until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
    Release the button and the device will reset.
    Wait about a minute for the base station to finish restarting, then open AirPort Utility from Applications > Utilities.
    Select the base station from Other Wi-Fi Devices, then click Edit.
    Select the Other Options button.
    Select "Restore previous settings" and click Next until you get to the final window.
    AirPort Utility will indicate that Setup is complete. Click Done.
    Quit AirPort Utility.
    Resetting an AirPort base station FAQ
    http://support.apple.com/kb/ht3728
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Airport express green but not showing up in airport utlitity nor airtunes

    Hi,
    I'm  trying to troubleshoot a problem for my parents. They have a westell dsl modem wireless access point in their office. To give them better reception in the rest of the house I hooked up an old airport express I had lying around. It works fine and has extended the network perfectly  (green light etc.) BUUUTTT why does neither the airport utility nor an ipad, nor itunes "see" the speakers or the even the express ?
    What am I missing?
    I wouldn't have to have an all apple networking? I seem to remember that i have used the express at hotels and it showed up no problems...
    Thanks,
    Philly
    Airport Express is one of the first ones. Computers running lion and mountain lion. iDevices on the latest 5.X

    Hi Carolyn
    Thanks for your reply. I'm running 10.6.4.
    Unfortunately - no luck with that solution. The Kitchen Airport Express also does not show up in the air tunes on my Apple TV.
    I have had no problems with getting airport expresses to show up in air tunes before adding this Dlink to my set up - I think it is something to do with the fact that the DLink is plugged into my Airport extreme. (I have tried DHCP off and on).
    Thanks

  • Can stream music to Airport express from Mac, but not windows

    I set up an Airport express for music streaming from a pc at my uncle's, and he used it without issue for 1-2 years. It suddenly stopped working for him, and was flashing amber. I was unable to configure wirelessly, but finally configured it with my Mac and an Ethernet cable.
    We are able to stream music to it now, wirelessly, from my Mac. But neither his windows 7 pc, nor his windows 8 pc can stream to it. The airport does not show up on iTunes on either computer. Also, airport utility on the pc does not see the device.
    I have tried everything I can think of: different settings on the airport, disabling firewalls on the pc, etc.
    Is there a way to get this working for him again?

    Bump again.
    I'm also running into this problem. I have an Actiontec MI424WR and an Airport Extpress A1084.
    When using WPA or WPA2, the AE can't seem to connect to the Actiontec. Has anyone found a solution to this?
    Side note, I had been using a Netgear WNDR3800 as a wireless access point plugged into the (wifi disabled) Actiontec. In this configuration the AEs connected fine, but my network performance was pretty awful. In trying to troubleshoot, I'm removing the Netgear device from the picture to simplify. Now that I've enabled the wifi on the Actiontec, all my other devices (iphones, ipads, computers) connect fine, just not the AE's.
    Thanks for any advice.

  • Airport Express all green, but no internet connection

    Hey guys. I'm using an Airport Express thru an ethernet cable at work. I'm attempting to create my own wireless network thru the LAN. I set up my AE in accordance with the Airport Utility instructions & everything is reading green. The AE, Airport Utility, & my wifi bar are all reading good, but I have no internet connection. What am I doing wrong? I reset the AE before I set it up.

    Do I need authorization from an admin?
    It is common practice for network administrators to require that each device that connects to the network be authorized......to prevent unauthorized access.
    Whether your admin requires this, I cannot say.....but it would be one explanation for the lack of an Internet connection.
    In a case like this, your computer.......which has been authorized.....might be able to connect to the network using an Ethernet cable....but a device like the AirPort Express....which has not been authorized.....would not be able to connect using the same Ethernet cable.

  • PLEASE HELP!!! AIRPORT EXTREME IS GREEN BUT NOT CONNECTING TO INTERNERT!!!

        Please, I'm begging of fellow man, women and children to help me figure this out!
    What Happened:
         I had my Internet and everything working before I went to work at 3 PM. My girlfriend got home around 4 PM and all of a sudden the my Internet was not working. I had to call my ISP, Comcast, and we had tested Internet connectivity which worked perfectly fine which is how I am typing this now. After that, I looked up some things that would remedy the situation. Power cycling the modem for minutes, seconds and hours. Also, I have tried to plug both the modem and router without plugging any Ethernet cord in to both of them, wait for them to power up, hook up the Ethernet cord and nothing. I have done factory resets on both the modem and routers and created a totally new network to see if that was the problem and noting. I have also changed the IP addresses, Subnet Masks, Router numbers, DNS servers and Domain names and nothing. I was stupid and did not get a protection plan on it, and my warranty JUST expired a couple of weeks ago, so I have barely had this router for a year. As all indications go, it is saying that it's connecting to the Internet, but when I go to my Macbook Pro and check the system preferences it's saying its connected to the airport, but when I do the assist me function and go to diagnose or assistant and test everything, the Internet and Server are yellow and everything else is green. I DON'T KNOW THE ISSUE!!!
    Hardware:
    Modem - Motorola Surfboard: Model SB6121
    Router - Apple AirPort Extreme 802.11n Wi-FI
    Any and all advice would be greatly, greatly appreciated. I do not want to have to purchase a brand new router after just purchasing this one last year for over $150. I'll be eagerly awaiting your help. Thank you in advance.

    @Mark Scott, are you referring to my cable modem or the apple router. I'm currently connecting to the internet just fine connecting the ethernet cable to my Macbook Pro laptop directly and having everything connecting just fine. Its when i try to connect wirelessly to the AirPort Extreme router is when I am unable to connect. If you were referring to the connecting the router directly to the computer and seeing if there is an internet connectin, I don't think that would help anything at all. Please let me know if this is what you meant and I will try it anyways.

  • Steady green light on A1084. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it.  Is there a fix?

    Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier.  Is there a fix?

    I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp.  The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express.  It would be nice to play Airtunes while simultaneously accessing the Internet.  I don't understand your question about what program I am using for which I require AirPlay.  I am not learned about computers in general, and even less so about Macs than PCs.  I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier.  I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo.  I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

  • Airport express: wireless works, but internet does not

    Hello.
    It happened yesterday for no apparent reason: Internet was not working via airport anymore, as it should have normally.
    Config: Cable modem to Airport extreme (.g); USB printer attached to base station, base station Ethernet port going to router with Boradband phone and 1 PC attached to it.
    4 MAc computers attached to Network (and getting Internet) via Airport.
    Internet connection using DHCP, dynamic IP address provided by RoadRunner (Time Warner).
    I tested Cable Modem (works), all ethernet cables (good), reset base station and recreated an airport network.
    Airpot network works, USB printer is accessible via Airport, but Internet is still off (although Network Configuration in Sys Pref give me a green light and informs me that I am connected to the internet)
    My question: is it possible that Base Station fails only for its Internet/WAN capability, and not for Network functions?
    thanks. This one is a puzzler.
    Paul

    Hello.
    We have been having the same problem discussed in this thread earlier, described as follows:
    It happened two days ago for no apparent reason:
    Internet was not working via Airport Express anymore, as it
    should have normally.
    Config: Cable modem to Airport Express via a US Robotics router,
    2 MAC computers (iMac700 and MacMini) attached to Network (and getting
    Internet), the iMac through router and the MacMini via Airport Express.
    Internet connection using DHCP, dynamic IP address
    provided by RoadRunner (Time Warner).
    iMac connected to router is getting Internet just fine; MacMini connected to network via AEX is getting network signal but no Internet. Network diagnostics says it can't tell what's wrong and call ISP. ISP says it's an Apple problem.
    I tested Cable Modem (works), all ethernet cables
    (good), Airport Express network works, but Internet is still off for MacMini.
    I've done a power recycling exercise twice, but still no Internet on the MacMini.
    Does anyone have any ideas? Both my son and I are stumped. He's a teenager and is fairly computer savvy. Neither of us has been able to figure this out.
    Joe

  • Just got my airport express and it's NOT working (Help)

    Hi,
    I've just got my airport express 2 days a go and I've try many time to set it with my black macbook and my pc and it's not working at all...
    When I've plugged it, the ligth went grenn and then solid amber and then it flashed as it was suppose to do. After that I wend in the "utility airport" on my macbook, I was seeing my airport express but when I clicked continue, the computer was searching for something for 30 minutes and then I realized that I was connected on the internet but that my networks were not configured.
    So I've decided to try to do a factory reset. And then my macbook couldn't see my airport anymore. So I've try with my pc and it has recognized my airport. I've started to do the configuration, but at some point, my computer couldn't see my airport anymore...
    So please help, what can I do to make airport express properly.
    Thanks
    Vero

    I really need some help please...
    I've tried to connect directly my macbook to airport with my ethernet cable to configure airport express... but when I've open the airport express utility, my computer couldn't find my airport express...
    PLEASE I NEED SERIOUS HELP !!!
    I really think about bringing airport back to the apple store

  • AirPort Express is dead, but under warranty

    My airPort Express Base Station does not work. It does not appear anymore, and is apparantly not sending a signal. I have rest it, and tried to troubleshoot it in every way I can think of. I own others that work fine. It is still under warranty with apple, as the receipt says "warranty effective through Jul. 18, 2008." How do I go about the process of having them replace it or fix it?

    Gail - the symptoms you describe are far less common, but I think you too have a dead Airport Express. Yes, a software update (or more specifically, a firmware update) gone wrong can easily turn a functional Airport Express into a doorstop.
    Try doing a factory reset per:
    http://docs.info.apple.com/article.html?artnum=108044
    If the symptoms persist - get a warranty replacement. Absolutely your Airport Express will be covered for this sort of problem if it is under warranty.

  • Airport Express 802.11n does not support 5 ghz range

    I have a Airport Extreme and a Airport Express both are 802.11n. I have the Airport Extreme setup to 802.11n (5ghz only). The Airport Express 802.11n will not work in the 5ghz range no matter what I do.
    If I change the Extreme to 802.11n (2.4 ghz only), and set the Express to 802.11n 2.4ghz, it works fine.
    Both systems have been upgraded to the 5.3.1 firmware.
    Apple claims the Express works in the 5ghz range. The unit I have does not..so what is the deal?
    Steve

    I finally got this to work at 5ghz.
    BUT,
    The Airport Utility that supports the Express is less then great. There is no manual option to set the Express at 5ghz as a client. I assume that Apple will fix this soon.
    I also had the problem described in several places in this Discussion group, that the Express becomes un-available after changing the config. I finally just restored it to the default, unplugged it and let it sit overnight. Then I reprogrammed it, saved it, verified it works, then let it sit all day with out unplugging it. I then unplugged it and moved it to the location I wanted it at so I could stream music, and it worked fine at 802.11n/5ghz.

  • Airport express second generation do not connect to the internet

    Airport express second generation do not connect to the internet. I changed my location and the problem happened . Earlier it was running smoothly. I am not finding the cause of the problem. I switched on and off several times but the problem persists. Please help me.

    Are you asking the make/model of the computer or the AX base station?
    Neither, I was interested in the make/model of the cable modem.
    Our ethernet connection was fried in an electrical storm so we had to go wireless.
    Electrical storms are never a good thing when it comes to electronics. What was/is your current network configuration? Is it something like the following?
    Cable modem > (Ethernet cable) > AX > (wireless) > wireless devices
    Is there another router, other than the AX, in the configuration? ... or an Ethernet switch? I'm just trying to understand your network to best advise you on how to configure the AX.

  • My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
    Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

  • Device Show in My Computer But Not Show in itunes

    My iPod Shuffle Disconnect During The Restore Process And Now Device Show in My Computer But Not Show in itunes.Please Help Me.to Solve This problem>

    Does it say that it works with iOS devices (iPhone, iPod touch or iPhone)? iOS devices have a different format/file system than other iPods.

Maybe you are looking for

  • Library path location

    Hello! When i attach library and if i say yes when program ask me if want to save path of the library, where actually does the program save this path. How can i remove it?

  • Problems with Wireless connection AFTER 10.4.2 update

    I have read several topics on wireless problems AFTER the 10.4.2 update and wondering if anyone (or Apple) has found a fix to this problem. I cant get to my network or the internet via airport. I have tried zapping the pram, resetting the permissions

  • ISE EAP SSL/TLS Tunneling Certificates

    Hi, I am working on an ISE implementation that is going to perform authentcation accross several domains using LDAP. The domains that I have in my environment are a production and pre-production/testing domains. Currently my ISE appliances are joined

  • GETTING ERROR INVALID IDETIFIER

    NEED HELP ASAP!!!!!! ERROR MARKED AGAINT THE LINE...SEE THE LAST FEW LINWS FRM FORALL STMT declare type summary_upd_tab is table of summary%rowtype; summary_upd_var summary_upd_tab; begin select user_id, min(start_time_utc), max(end_time_utc), sum(du

  • Callconector for Salesforce Issues

    Hello I'm currently using the callconnector for Salesforce. I have a CUCM  V 7.0.2. I have PC`s with Windows XP and the integration works fine but the PC`s with Windows Vista doesn`t work. I set up CiscoTSP001.tsp with all option (User, pass, ip, etc