Airport Express not working for MacBook Air, ok for iMac

I connect to the internet via wireless broadband; the ethernet cable from the broadband antenna plugs into my Airport Express router. I run both my 27" iMac desktop and my 13" Mac Book Air off the Airport Express router. To the best of my knowledge, nothing has changed with my internet provider's settings.
Since Friday, the MacBook Air internet connection barely works; if a page loads, it takes forever (and I have a very fast broadband connection.) Checking the same connection on the iMac has no delay and loads instantly. On the laptop, if the page does load, and I click a link on that page, the link takes me to a new page requesting me to log in to my internet provider, or just fails to load. I get lots of "page failed to load; interneet connection was reset....".
I have checked network settings on both machines and they appear to be just fine. I have run diagnostics and it shows everything working fine.
I ran Disk Utility (permissions repair and verify disk) and have no problems.
I have tried restarting the laptop several times.
Software is up to date.
I don't think it's the internet server or the connection since it's working on the desktop Mac.
I'd appreciate any suggestions or things to try; I read about doing soft and hard resets but am reluctant to try that since Airport is working for the desktop computer just fine.

I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps...

Similar Messages

Airtunes/airport express not working with MacBook

I have a new Macbook and an older Powerbook. The Powerbook is working nicely with my airport express and airtunes. I copied all settings to the new Macbook and configured it the same way, I also did the firmware update.
ITunes found the airport express, connected and I could listen to the music.
Later during the day it didn't work anymore, although I didn't change any settings. ITunes can no longer connect to the airport express, the airport utility does find the base station, but I can no longer configure or reset it.
I started the old Powerbook again which is still working without problems
What can I do to get the Macbook working as well ?

Same issue here!! Everything working fine with OS X Tiger. As soon as I upgraded to Leopard the problems detecting the AX started. The setup I have is the following:
-Linksys wireless router
-AX connects to wireless network to play songs through iTunes and to print via USB printer.
The green light on the AX is solid which means that it is connecting to the existing wireless network just fine. The problem lies with Leopard detecting and connecting to the AX. I have tried just about everything over the last few days and nothing seems to work. Some resets and updates let my macbook detect the AX for a little while but then it starts to drop and cannot be detected anymore. Apple HAVE to do something about this. These are two apple products not communicating properly. What ever happened to the good old days of apple products being so user friendly and "plug-and-play"
Disgruntled Mac user

Just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ??

just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ?

mickair wrote:
I have been experiencing some networking problems
Welcome to Apple's discussion groups.
I have the latest Time Capsule ("TC"), an old Airport Extreme Base Station ("AEBS") bought in 2007 and 2 Airport Expresses, one bought in 3 months ago ("AE-Alpha") and the other bought back in 2007 ("AE-Beta"). All of them have been updated with the latest firmware.
Based on those dates, the AirPort Extreme is probably flat (as opposed to dome-shaped), making it 802.11n-capable. The Newer AirPort Express is probably an 802.11n-capable model A1264, while the older one is probably a model A1084 or A1088.
I use {the TC's} DHCP function ... to avoid unauthorized use.
This a discussion for another thread, but that's not what DHCP is for.
The wireless setting for it is to participate as WDS Main, but after reading various posts, it seems WDS is a bad idea
With that older AirPort Express you're stuck with WDS unless you decide to replace it with a newer model.
The AEBS is currently setup as being a WDS Relay at the moment
Why a relay? That's only needed if there's another base station "beyond" it that is configured to depend on it.
Since the AEBS is connected to the TC via Ethernet, you should probably configure it as a "roaming network":
http://discussions.apple.com/thread.jspa?threadID=2273124
{The AE-Alpha} connects fine as WDS remote at the moment
I don't have any experience with mixed WDS and non-WDS networks, but since it's 802.11n-capable, you may be able to configure it to "extend" the network of the TC rather than as WDS. Look for a setting on the TC to "Allow this network to be extended".
Physical location:
AEBS in one end, TC and AE-Alpha in the middle while AE-Beta on the other end.
A device such as "AE-Beta" that's supposed to extend a network shouldn't be "at the end" but should be half way between the central base station and the clients that need an extended network.

Airport express not working since today's itunes update

Since updating iTunes today, Airport Express not working. More specifically, the Airport software will recognise the device exists, but iTunes cannot connect to it, just getting error message.

Ray Dio wrote:
Since updating iTunes today, Airport Express not working.
try this:
go system preferences > network > airport > advanced > TCP/IP and set *configure IPv6* to off. click on apply.
now have iTunes connect to the remote speaker again.
JGG

Airport express not working with apple products

We have been trying to get airport express to work with a macbook pro, ipad2, iphone, laptop, htc wildfire - havent even tried the air music or printer yet!
We have a green light on the airport express which is connected to an ntl cable modem(virgin media network).
Currently the only thing that will connecy is the laptop and my htc phone. All the apple products will not connect?
We went to the apple store today and it worked grand when it was plugged in - the apple products all worked.
The network comes up on ipad2 but when you press connect it says 'unable to connect'
can anyone help us please?
thank you

I have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.

Airport Express not working with Comcast

I used to have AT&T and had my airport working well. Yesterday i changed to Comcast and my airport is not working the light stays yellow.. I tried resetting it but it didn't work.. I use it with my old Cisco router and its working. Whats wrong with my Airport Express? My computers are Windows 7

A solid amber light indicates that the AirPort Express has locked up....or it is defective.
Suggest you that try a Factory Default Reset as follows:
Pull the Express from power
Let it rest for a few minutes
Hold in the reset button and keep holding it for another 8-10 seconds while you plug the Express back in to power
Release the reset button after the hold period and allow 40-45 seconds to restart
The Express should display a slow, blinking amber light at this time
If you continue to see a solid amber light after a few tries with a Factory Default Reset, the Express has failed and it will need to be replaced.

HT2508 airport Express not working in Mountain Lion

My old airport express stopped working properly since I loaded Mountain Lion. I purchased a new Airport Express and it will work, but the audio fades in and out. I am connected from the airport express unit to my audio receiver via a 3.5 out into RCA (red/white) connector into the receiver. Can someone suggest a cure?

I have three printers up and running connected to an Air Port Express,
and since I upgraded to Lion I can't connect to any of them, so I continued using SL on this MBP17.
System Preferences does not show any of my printers.
I opened Air Port and it says I need to update.
When I click on the update button, it takes me to the App Store, but no Air Port Software — What gives?
Now having the same problems with Mountain Lion.
Hoped ML would fix the problem, but NO.
I find I have to save documents to a flash drive and go to my old PowerMac G4 to print.
Steve we miss you. Apple is going to crap without you.
Message was edited by: random47 to fix typos and add information.

Airport Express Not Working

Maybe someone can give me a hand. The airport express is working great for AirTunes but will not hookup to the internet. We've plugged in via ethernet wire and it works fine. We've also tried resetting the airport and unplugging it, resetting our computer. No dice. On the top of the computer screen the aiport indicator reads full internet perfectly but cannot connect. We're stumped.
Thanks for anyone who can give us a hand.

Assuming you have a green light and you wireless mac can see the network but you have no internet; unplug the cablemodem for a minute.

Airport express not working with 8.0

airport express was working fine until I downloaded IOS 8.0
Cannot get icon to show up on screen to play on airport express network

I have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.

Airport Express not working after power blip

Hello,
I have been here before and gotten a lot of great advice from participants here, but I forgot my user name so I'm starting fresh. Anyway, I have a feeling I'm in for some bad news but I thought I would post just in case...
I have an Airport Express plugged directly into the wall behind my iMac in my house, and it has worked great for about 20 months. The computer where I installed and maintained the Airport Express is an iMac running OSX 10.7.5, if that matters.
Two nights ago our power went out for approximately 5 seconds.
I immediately discovered our WiFi was out. I checked the AirPort Express and it was flashing very fast yellow.
I first restarted the cable modem and verified that it was still working. The ethernet cord worked. I got out the manual and tried following all the instructions for resetting the Airport. The Airport device never showed up in the airport utility. At one point after using the reset button on the Airport, the light mysteriously changed to solid green and I thought I had a chance, but the device still didn't show up in the utility and after I unplugged the device again it just started the fast yellow light flashing again.
I have gone through other recent threads on this topic and I keep thinking I'm missing something. In the whole life of this device it's only gone down once before and it was a long confusing frustrating struggle to get it to work again, but I did. At that time the device was doing the same thing (flashing yellow) and wasn't showing up in the Airport Utility but somehow I got it working again. So I'm hoping maybe, just maybe, there's a procedure I haven't tried.
I understand people say you should protect your equipment with surge protectors and we actually do have everything else plugged into one. But the manual of the Airport Express makes such a big deal about obstructions and cords and other electronic equipment and shows a picture of the device plugged directly into the wall, so that's what I did. If it got fried in that power blip and I have to buy a new one, should I just plug it into the surge protector anyway?
If it's dead for good, I'm annoyed that I got less than 2 years of use out of it. I read in a thread here that they die on a lot of people because they run really hot and 2 years is average life. Seriously?
If I take it to the "genius" bar, will they be able to determine if it's dead or not before I buy a new one? Should I buy something else more reliable...ie, non-Apple possibly? If I had known this device had reliability problems, I would have shopped around more, but I always buy Apple.
Thank you for reading this and any reccommendations would be appreciated.
sincerely,
susan

A rapidly flashing LED is unusual, and strongly indicates a problem that can't be fixed.
I read in a thread here that they die on a lot of people because they run really hot and 2 years is average life. Seriously?
I doubt it; I have never had any of them fail and the oldest is about six years old. I don't pay any particular attention to cooling requirements. There were a rash of power-supply related failures due to defective components a long time ago, but it has been many years now. It affected many manufacturers of electronic equipment, not just Apple.
will they be able to determine if it's dead or not before I buy a new one?
Yes, absolutely. They will "hard reset" it, which you can do yourself before you go. See below. That is the extent of Apple's AirPort Express troubleshooting ability.
The damage it sustained may not have been related to power anomalies at all. In fact, if the power supply was damaged you probably wouldn't get any LED activity at all. I suspect the damage may have involved to your cable company's equipment. Improper lightning protection or surge suppression is very common, and can affect everything connected to your cable company's equipment. You should consider contacting them to determine if their equipment is properly installed. They're going to say their liability is limited to their equipment, and anything beyond their cable modem is your problem, so make sure they did their work properly.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Airport Express not working with Motorola Surfboard Sb6141 and TWC

My 2012 Airport Express was working fine with my Motorola Surfboard Sb6141 and TWC until about a week ago when the signal started dropping constantly. I hard wired the modem to my computer and everything worked fine. I took the Airport Express to the Genius Bar and it is working fine. I have followed the instructions posted throughout this board to reset the AE to factory settings, then turn everything off for 1/2 hour, turn on just the modem, the the AE 15 minutes later and the computer 15 minutes after that, but to no avail. When I try to set up the AE using Airport Utility, it allows me to assign a name and password, but then the light goes to solid amber and I get "An unexpected error occurred. Try again." Any ideas?

I'm still struggling trying to get the SB6141 to stay connected with my Airport Extreme but it drops altogether every day or 2 but if you're looking for an alternative, I've heard the Netgear CMD31T works well with the airport.

Airport Express not working with printer on Windows, works fine on Macbook

I have an airport express that is connected to my Brother laser printer. I installed the software and it works and prints fine on my macbook pro.
I tried to also set it up using my Dell running Windows XP SP2, but after using the instructions, it looked like it set up fine and the printer is recognized, but when I try and print, it just gives me an error message that that printer is "busy or unable to print".
Any ideas?

Is there another solution to this problem? I have two PCs running WinXP and can not print with either one of them through Airport Express. Printing works fine with MacBook. I have Bonjour on both PCs and have run the setup wizard. The printer seems to be connecting and then hangs up on "communicating with printer."

Airport Express Printer Works with Macbook Pro, but not on Macbook

We have two Macs -- a Macbook Pro, and a Macbook. Both are connected to an Airport Express, and can access the internet and control Airtunes without any issue. However, only the Macbook Pro can print to the Aiport Express connected printer -- a Canon ip3500.
When I go to system preferences to add the printer on the Macbook, the printer is available, and it allows me to add it. However, the location of the printer and the driver( or at least the driver number) are different, even though it is pre-populated by the computer itself.
Once the printer shows as being installed, I can print to that printer, but the job is automatically "Stopped" in the status. I cannot restart the job, it just stalls out.
When the printer is connected via USB, the Macbook can print to it without issue. It can also print to it via bonjour if I share the printer from the Macbook Pro.
Anyone else having similar issues? Any suggestions on how to fix it would be greatly appreciated.

Try creating a new location in the network settings. Then select Network port configurations and drag Airport to the top of the list. Uncheck any unused connection types such as built-in modem and Bluetooth.

Airport Express not working after update

I can no longer connect to my network through my Airport Express.
This afternoon I started up the software updated program in my MacBook Air and through my fully functioning network a whole bunch of updates were downloaded and installed.
But when everything was done I could no longer connect to my network through my Airport Express!
Unfortunately I didn't really notice what kind of updates I was installing.
There were seven in total. I think one was a firmware for my MacBook Air.
I also think there was one for my Airport Express because the last update was about it somehow and it needed to close down the network in order to finish the update. But when it was supposed to reconnect nothing worked.
I've turned off my modem, my airport express and my air but there's been no improvement.
My Win PC can't access the network any more either.
I've also tried to put the network cable straight in my PC and it works fine, so there's nothing wrong with the modem or the cable.
It must be my Airport Express...
The Airport Utility program can't find my Airport Express.
I can find other networks in the area but not my own.
What to do?
Any help is greatly appreciated.
Tommy

I got some help so that I could see what was updated:
2008-07-06 15:16:26 +0200: Installed "Keynote Update" (4.0.2)
2008-07-06 15:16:43 +0200: Installed "Pages Update" (3.0.2)
2008-07-06 15:16:47 +0200: Installed "MacBook Air EFI Firmware-uppdatering" (1.0)
2008-07-06 15:16:57 +0200: Installed "AirPort-verktyg" (5.3.2)
2008-07-06 15:24:31 +0200: Installed "Mac OS X Kombinerad uppdatering" (10.5.4)
2008-07-06 15:25:04 +0200: Installed "Numbers Update" (1.0.2)
2008-07-06 15:25:54 +0200: Installed "QuickTime" (7.5)
2008-07-06 16:37:59 +0200: Installed "Keynote Update" (4.0.3)
2008-07-06 16:38:20 +0200: Installed "iDVD-uppdatering" (7.0.2)
2008-07-06 16:38:26 +0200: Installed "iMovie-uppdatering" (7.1.2)

Airport express not found (by macbook) after moving to the US

Hi,
I unplugged my perfectly working AX (v6.3) in Europe, moved to the States and now have connection problems (same Macbook Pro, same AX). ISP here is Comcast.
Symptoms: The airoprt utility (AU) doesn't see the AX (whether cable modem is plugged or unplugged to AX). Reset or factory-reset of AX doesn't solve the problem. If I restart AX and then also the computer the AU sees the AX, but can't connect (connection timeout). After this first trial to connect the Macbook will not see the AX any more until I reboot the Macbook.
I can connect the AX via ethernet and configure it using AU. I did not set a password (for test reasons), connection mode is 802.11b/g compatible, channel auto, security none.
Also did a restart of the cable modem (unplugged for 10 min) like described elsewhere in the forum. No help. Anyway, if I am correct the AU should see the AX even without the modem connected to it, right? If I plug the modem to the AX and restart the modem, the LED on the AX will go green. Still it is not detected by the Macbook.
Any ideas highly appreciated. Thanks!!!
Message was edited by: Eppentorf
Message was edited by: Eppentorf

As Duane mentions, 5 GHz signals do not travel or penetrate well because the higher frequency signals in this band are absorbed by any obstructions much more quickly than 2.4 GHz signals.
Although not exactly true, unless you have close to line-of-sight between your computer and the AirPort Express, you will probably have much better results using the 2.4 GHz signals which penetrate more effectively and work greater at longer distances.

Airport Express not working for MacBook Air, ok for iMac

Similar Messages

Maybe you are looking for