AirPort Express (Problems with multiple remote speakers

I've been so far successfully using several AirPort Express base stations to stream music from Itunes to differant rooms in my house. A week ago I suddenly started getting an error message ("Unknown Error -3256) when attempting to stream to multiple rooms. Anyone else having this problem all of a sudden? I've gone thru the configuration for Airport and each base station and everthing seems to be in order.... Any ideas... Anyone? thanks

A lot of people including myself have been having problems with the airport. We think it's the AirPort update or the security update that is causing problems. If you're experiencing problems or slow downs with your internet then that's also part of the update. Wait till the next update or we find a workaround to this problem.

Similar Messages

  • Airport Exreme - Airport Express droupout with multiple Airport Express sta

    I have multiple airport express's, an iMAc, a Airport extreme router, all software/firmware to current release. If I play on the iMac and one set of remote speakers, no problems, once I add two airport express stations with iTunes, I get the dropouts. Any ideas. I have already got rid of wds, changd channels, tc. to no avail.

    I have the same set up and had the same issue and a guy at apple support gave me a tip to try and it worked!. First remove all the expresses from the power outlets keeping your airport extreme running. I also recommend using a different channel say 11. and use ap grapher
    http://www.chimoosoft.com/products/apgrapher/
    to see if your network looks like it's running well after you resetup your everything or before you bother doing this. I found my audio gear was really messing with my airports bandwidth and when I moved it to a new spot ap grapher showed I was getting a nice steady 54mbit/sec.
    So again unplug the expresses and keep the extreme up and running.
    You must first do a reset on the airport express by pushing in the little white button on the bottom with a paper clip for a few seconds, but you should check out how to reset the airport express via apple's web site because there are 2 types of resets one with it plugged in and one with it not. Not sure which is right reset method so check that yourself.
    Once you have reset it you want to set the first express to extend your preexisting airport extreme network using the airport setup utility. If you have two expresses you may only need to do this to the last one in the chain but it can't hurt to reset them all form scratch.
    Once the first express is up and running you then unplug the airport extreme from it's power outlet. Then you go to set up the 2nd express after you reset it and here lies the trick. You extend the 2nd express off the first express without the extreme involved. Then you plug in the extreme back into the power and bingo you have tricked the express #2 to extend from the first express and they wind up with new ip numbers like 10.0.1 and 10.0.2. Instead of them competing for signal using the same ip address they now have their own individual ip address, it turns it into an extension chain. If that makes sense I don't know what the tech terms are for this but it did cure my issues of dropouts I thought it was odd that they had the same addresses so it makes sense that they should have their own.
    Micro wave ovens cause drop outs and so do some wireless phones but you can always check on your signal using AP grapher. I found that when I walk around with my MacBookPro in my house that the expresses really don;t have much of a range so if they are really far apart that could also be an issue. I'm sure the N versions are much better and I am thinking about upgrading.
    Hope this helps cause it sure took a long time to type:)

  • Airport Express problems with new MAC MINI and DLINK router SOLVED

    Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
    I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
    Problem was briefly
    Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
    also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
    Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
    last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
    I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
    between us we carried out the folowing and resolved the problem and I am now very happy
    mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
    This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
    Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
    We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
    we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
    this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
    you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
    Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
    Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

    Hello macfar14. Welcome to the Apple Discussions!
    For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
    Just to be sure nothing was missed, here are the basic steps to do this:
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort > Wireless
    o Wireless Mode: Join a wireless network
    o Network Name: <existing wireless network's Network Name or SSID>
    o Wireless Security: <select the encryption type of the existing wireless network>
    o Wireless Password: <enter the existing wireless network password>
    o Verify Password: <re-enter the existing wireless network password>
    Music
    o Enable AirTunes (checked)
    o iTunes Speaker Name: <enter desired speaker name>
    o iTunes Speaker Password: (optional)
    o Verify Password: (optional)
    o Click Update to write the new settings to the AX
    In iTunes:
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)

  • Airport Express connectivity with a remote server

    I have gone to our ISP already with this question, but they cannot assist me. I am hoping someone here will be able to assist me in solving this problem. My boss wishes to connect to our server at our company from his home using an Airport Express. The company's server is housed on our work site and connected to an internal network. This network is in turn connected to our ISP via a DSL modem. We opened the ports needed in order to connect with the server in house and redirected incoming traffic to the server's internal ip address. We had our boss test connecting to the server from his home. He could not do so. We were asked to have him try connecting directly to his DSL (also from the same ISP as what our company has). He will be doing that this evening. However, this does not help the fact that this diminishes the whole idea of him having wireless capability in his home or when he is traveling. We had our ISP test accessing our server remotely using Telnet, and it was successful. They were connected directly, however, not using a wireless network.
    Is there something that we are missing here involving some sort of setting? Or is this something I need our ISP to dig into further? Please let us know if you have any ideas or suggestions. Thank you.
    Apple iBook   Mac OS X (10.4.7)  

    To combat the issue, enable an HLB port on your FE servers (or any other pool you are using HLB on) and configure the health checks for the load balancer to use that port instead of the port used for TLS traffic.
    Start by configuring the pool in Topology Builder, right click the pool, and choose Edit Properties>General.  Place a check in the “Enable Hardware Load Balancer monitoring port” and specify a port.
    Also you can refer below link
    http://ocsguy.com/2011/11/02/lync-hardware-load-balancer-monitoring-port/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Airport Express no longer "sees" remote speakers

    The problem started this morning. I un-slept my computer, opened iTunes 5.0 and it hung while trying to connect to remote speakers, requiring a force quit due to "(not responding)." I opened iTunes again and this time it didn't even see the speakers - there was no box at the bottom.
    I opened Airport Admin Utility and the music tab is gone! In fact I can see it for a split second as I open the Utility, but then it just comletely dissappears... Is anyone else having this problem? The only thing I've done is disconnect my speakers once last night when I was cleaning, but I plugged them right back in, and as far as I can tell, all of my functionality was there last night. Any ideas?
    EDIT: I would like to mention also that the internet works just fine, as my posting of this should demonstrate, and that I have firmware 6.2 installed. I tried rolling back to 6.1.1 with no luck and then upgrading to 6.2 again - also with no luck.

    My problem seems to have "solved itself." I say that, meaning I tried dozens of things and eventually some combination worked...
    As I stated before, I tried installing an older version of the Airport firmware. It didn't work. I reinstalled the v6.2 software and that didn't work. I still could view the Airport in both the menu (at the top of the screen) as well as in Airport Admin Utility. However, opening the basestation in Airport Admin yielded a disappearing Music tab. I also discovered that I couldn't print over the network.
    I tried renaming the network, resetting the basestation, unplugging the speakers, unplugging the printer. In an act of pure desperation I tried unplugging everything, resetting the basestation, and running the Airport Setup Assistant. I gave the station a different name and went through the entire process. However, nothing changed - the internet worked, but music and printing were disabled. Disguisted, I changed the new name back to my old, and checked one more time... IT WORKED!
    Sorry to be longwinded and practically useless; I hate it when a problem solves itself with no indicator as to what was wrong in the first place. My only advise it to keep playing until it works again. Goodluck, and I'm interested in any ideas anyone has.

  • Airport Express problem with Truphone

    I use my AE at home to both extend my wireless network out to my deck and to use airtunes. It works perfectly, although the yellow light is always flashing - go figure. I also take it with me when I travel and the hotel has ethernet cord only. Again, perfect - I therefore always have my wireless network on the road. I then use this wireless network to make phone calls through Truphone and LOVE how well it has worked from many countries. Recently, however, I had a problem calling from the Cayman Islands to the USA - the parties I called heard my voice, but it was on-off-on-off-on-off with a rapid frequency - and they had great difficulty understanding me. When I called Truphone they suggested I perform their echo test and sure enough, I could hear exactly what my called parties were hearing. That confirmed that the problem was at my end. The condo in which I stayed had a DSL connection. Truphone's reply was: "...with your particular Wi-Fi set-up I suspect that the most likely cause of the problem is that a SIP ALG that is ‘badly mangling’ the SIP reply from us (In English; this is a function on some routers which needs to be disabled). Or if you have multiple routers on your network (as I guess you might have), you may be able to solve the problem by disabling DHCP/NAT on one of your devices." Does anyone have a possible suggestion for me to correct this problem? Thanks.

    Or if you have multiple routers on your network (as I guess you might have), you may be able to solve the problem by disabling DHCP/NAT on one of your devices." Does anyone have a possible suggestion for me to correct this problem?
    To disable both NAT & DHCP on the AirPort Express Base Station (AX), use the AirPort Utility to reconfigure it as a bridge. (ref: AirPort Utility > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))

  • Airport Express Problems with restarting

    Hi there,
    I am having a problem with my Airport Express every time I try to change settings when it updates and restarts the Airport Express cannot be found by the Airport Utility.
    Background:
    I have not used my Airport Express for about a year or so now.. but have pulled it back out to use on a new computer hooked up for media but does not have wireless. I was going to use the Airport Express to connect to my existing wireless network and then hook the new computer through the ethernet connection. But I cannot seem to get the Airport Express to cooperate and update and then restart, every time I do that it is undetectable by the airport utility. I have tried doing hard resets and factory resets on the airport. Has anyone else ran into any problems like this?
    Thank you

    cr3at1ve wrote:
    I am having a problem with my Airport Express every time I try to change settings when it updates and restarts the Airport Express cannot be found by the Airport Utility.
    Background:
    I have not used my Airport Express for about a year or so now.. but have pulled it back out to use on a new computer hooked up for media but does not have wireless. I was going to use the Airport Express to connect to my existing wireless network and then hook the new computer through the ethernet connection. But I cannot seem to get the Airport Express to cooperate and update and then restart, every time I do that it is undetectable by the airport utility. I have tried doing hard resets and factory resets on the airport. Has anyone else ran into any problems like this?
    Welcome to Apple's discussion groups.
    Please supply some details about the rest of your local network, including brand(s) and model(s) of your Wi-Fi equipment, including your AirPort Express. Configuring a Wi-Fi network with multiple base stations can be tricky. The details you need will depend on the particulars of your equipment.

  • Airport Express problems with Vista

    I have read on here that people are running the express with Vista an I am not sure how? I loaded the disk and everything come up but the Airport setup assistant. When I open the Airport asmin utility it is blank. I am not sure how to get this up and running any help is appriciated.

    I have the exact same problem trying to connect my Airport Express to my Vista laptop. I managed to get around it by using the Admin Utility, choosing "Other..." and then entering the router IP (for me 10.0.1.1) and password "public".
    However after I have enabled WPA2 Security the connection does not work that good. After a short while throughput is degraded and then it drops the connection completely.
    Is Airport Express supposed to work with Vista or what am I doing wrong?
    HP Pavillion Vista   Other OS  

  • Airport Express problem with iMac G5 iSight - help needed!

    I bought an Airport Express (AX) last week, upgraded my OS to Leopard and installed Airport Utility fine. I could join my existing wireless network and everything worked fine for streaming itunes through my stereo. But this week Airport Utility has stopped being able to find the AX and I can't work out why - really need some help! Its in the same place as last week, close to the computer, and I tried another location right next to the Imac but didn't work. When I restore factory settings Airport Utility does recognise the device, and allows me to update settings for wirelessly connecting to my existing wireless network, so the light on the AX is solid green. But then AU again says it cannot find any AX wireless device. Can anyone tell me what I'm doing wrong???

    Hi I'm still battling with this - have connected the AX to my Imac via ethernet and it shows up fine in Airport Utility. Status light is green and it says its set up to connect to my existing wireless network using wireless connection. Security in Network Preferences is the same for both: WPA2 Personal.
    So I don't think there's a problem with the AX, and my current wireless network (BT Home Hub) is working fine.
    And when I restore factory settings Airport Utility can see the AX before updating settings so the wireless side of AX must work too.
    I'm figuring it must be something about the settings that mean AU can't see it anymore. But I can't work out what, since security is the same.
    Any ideas would be great!

  • Time Capsule/AirPort Express problem with DHCP server

    Hi everyone,
    I seem to be having some weird issue with my home network.  I use a Time Capsule (2011) as my main router and a new AirPort Express as a wireless bridge (router set to "Extend a wireless network", the LAN port is connected to network printer).  Recently, it seems that at least once or twice a week that the DHCP server on my router stops working.  Computers that have static IP addresses have no problem accessing the internet or my local network, but  devices that don't have static IPs  are unable to join the network (over Wi-Fi or ethernet) because they are not being assigned an IP.  This never happened before.  I'm not sure if it has anything to do with the recent firmware update.  Anybody else seem to be having this problem?  I am able to get the DHCP server working again by restarting the Time Capsule or by setting the computer or device that won't connect to a static IP.  Really curious why this seems to be happening…
    Thanks for all the help guys

    I am having the same problem with the same setup: a 2011 Time Capsule and an Airport Express. I've had my Aiport Express hooked in for about 2 years, so I know it is not the problem. The only difference I have is the DHCP will stop working on the ethernet, but still work over WiFi from the TC. Rebooting the Time Capsule fixes the DHCP issue.
    I am running version 7.6.4 in the Time Capsule.

  • Airport Express Problem with Wired/Wireless networks simultaneously

    Hello,
    I'm having trouble maintaining a connection with my AX (2012) in a work environment.  Basically, I have a Win 7 laptop connected via ethernet to the internet/corporate net.  I have configured the AX to create a separate wifi network that does not connect to the internet. In order to connect to the AX, I have to disable both the Ethernet adapter and the WLAN adapter, enable the WLAN adapter, connect it to the AX's network, and wait for it to show up in the utility.  Only then can I re-enable the ethernet adapter for internet access.  Then, inevitably, the connection dies within 15 minutes and I have to repeat the whole process.
    Can anyone tell me what's going on here?  Is the wired network interfering with the wireless network?  Is something configured wrong?  Below is the output from ipconfig/all, if that helps.  The AX is configured with a 169.254 range. IP address and behaves the same way whether the IP address is auto or manual, and there is no difference if the signal roams channels or is fixed to a single channel (I've played with them all).
    Thanks in advance for your help. 
    Wireless LAN adapter Wireless Network Connection:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : DW1501 Wireless-N WLAN Half-Mini Card
       Physical Address. . . . . . . . . : 68-A3-C4-0C-CE-5B
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.0.1.2(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : Thursday, December 06, 2012 2:32:22 PM
       Lease Expires . . . . . . . . . . : Friday, December 07, 2012 2:41:43 PM
       Default Gateway . . . . . . . . . : 10.0.1.1
       DHCP Server . . . . . . . . . . . : 10.0.1.1
       DNS Servers . . . . . . . . . . . : 10.0.1.1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . : XXX.com
       Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Connecti
    on
       Physical Address. . . . . . . . . : 5C-26-0A-40-37-A9
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 3.197.129.227(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.254.0
       Lease Obtained. . . . . . . . . . : Thursday, December 06, 2012 2:42:43 PM
       Lease Expires . . . . . . . . . . : Thursday, December 13, 2012 2:42:42 PM
       Default Gateway . . . . . . . . . : 3.197.128.1
       DHCP Server . . . . . . . . . . . : 3.156.134.20
       DNS Servers . . . . . . . . . . . : 3.156.130.30
    3.156.130.130
    3.23.190.40
                                           3.23.192.43
       Primary WINS Server . . . . . . . : 3.156.130.30
       Secondary WINS Server . . . . . . : 3.156.130.130
       NetBIOS over Tcpip. . . . . . . . : Enabled

    Here goes - read this through completely and see if it makes sense:
    1.  Reset the Express to factory settings by unplugging it and plugging it back in while holding in the reset button - release the button when the light starts blinking - then wait for the light to blink slowly indicating factory default.
    2.  Disable the wireless and enable the ethernet on the laptop and connect an ethernet cable to the WAN port (the circle of dots) of the Express and use the AU toset it up in bridge mode to create a wireless network with a name of your choice - you don't really need a password but you can assign one if you wish - if you do not use a password you will have to choose to ignore the error message for no security.
    3.  Accept all other defaults and ignore any messages about not having an internet or ethernet connection and update or finish the setup - if you get a blinking amber light, open the AU and correct any error messages.
    4. You can now disconnect the ethernet cable and disable the ethernet on the laptop and enable the wireless so you can stream iTunes to the Express - the laptop must stay wireless to do this - you can not accesss both at the same time - you can also use an iPhone or iPad or iPod to use Airplay and then you can use the laptop via ethernet for the internet.
    5.  To access the Express from now on, you have to use the AU wirelessly from the laptop.
    The above is assuming that you don't currently have wireless in your office - the other alternatives are:
    1.  To hardwire the Express and have it create a wireless network and access the internet - you could then use your laptop wirelessly or wired to connect to the Express and use Airplay and your pc at the same time.
    2.  If your office has wireless, you can set up the Express to "join" the existing network - you can then do the same as in number 1.
    I hope this helps - everyone's situation is different - the above scenarios work for me - you might have to do some tweaks but the info is there - let me know if you have any questions.

  • Airport Extreme + airport express - problem outputting to multiple speakers

    Hello,
    I have set up my airport express by joining my existing Airport Extreme base station wireless network. When I play my music in iTunes, I am able to select either the Computer or Airtunes for the output in the drop down box in the lower right of iTunes. When I select Airtunes, the music streams no problem to my remote speakers connected to Airport Express. However, when I try to select Multiple Speakers in the drop down menu in iTunes, a pop up Remote Speakers box opens - when I select both the Computer and Airtunes in this box, I get an error message - "An errror occurred while connecting to the remote speaker "Airtunes". An unknown error occurred (-3256)." Since the error occurs only when I try to selct both the computer internal speakers and the remote speakers, but I am able to connect to the remote speakers by themselves, I am really confused. Any thoughts?
    Charly

    Just to clarify, the goal is to play iTunes on both the computer's internal speakers and my remote speakers at the same time.
    Charly

  • AirTunes using Airport Express - Low sounds level in speakers

    Recently, I started having a problem with the sound level coming from the speakers connected to my Airport Express. The setup worked fine until a few weeks ago.
    Actions I have tried:
    (1) a hard reset of the Airport Express - no improvement
    (2) connecting speakers directly to laptop - sounds level was great
    Software I'm using:
    - iTunes v7.1.1.5
    - Airport Express Firmware v6.2
    Thank you in advance for any help.
    IBM Laptop ThinkPad   Windows XP Pro  

    I suggest that you upgrade your AirPort Express Base Station's (AX) firmware to version 6.3.

  • Help w/ Problem Connecting to Remote Speakers

    I have remote speakers connected through my Airport Express. After I downloaded the latest version of I tunes, I am no longer able to use my remote speakers, Get this error message.
    An error occurred while connecting to the remote speaker "XXX". An unknown error occured (-3256).
    I have both a Dell Laptop w/ Windows and an I-Book, I downloaded the latest version of I tunes on both of them the same day, and get the same error message above on both when trying to use my speakers, I am able to use the built in speakers on my computer however. Never had a problem using the remote speakers before. Possibly a bug w/ the latest version?
    Any suggestions?

    I was able to resolve this issue using the following two Apple Support articles:
    Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes
    http://support.apple.com/kb/TS2278
    All about Time Capsule, AirPort Extreme, and AirPort Express base station firmware updates
    http://support.apple.com/kb/HT1218
    There may be an omission in the first article. In my case, after step 4 of the instructions for Mac OS X 10.4.11 (click the Configure button) I needed to click the Advanced button and select TCP/IP in the new window.

  • Is Airport Express compatible with ADSL2 modem?

    I already have an ADSL2 Modem (with both ethernet and usb cables) which was provided by the ISP. I am looking out for a router since my current Linksys router is giving problems. I am thinking of purchasing the Airport Express since it gives me the option of using my printer and ipod wirelessly as well.
    I just wanted to clarify if the modem will be compatible with the Airport Express. Also, if the Airport Express can be used as a proper wireless router for accessing the internet wirelessly through my MacBook Air.
    Can anyone help please!
    Thanks.

    Thanks. I checked on my modem setup page and PPP over Ethernet ( PPPoE ) is selected. Does the AirPort Express work with this? Also, how is the connectivity? What is the difference between G & N. Previously I had a Linksys Wireless G router. The Airport Express seems to be N router? Will that create any problems. I just want to clarify before I buy it.
    Thanks a lot for answering.

Maybe you are looking for

  • Issue using Get-Child-Item

    Have a function that will scan (grep) files in a folder with a certain extension.  For some reason, Get-Child-Item always returns empty / 0 files on my folder even though you can look at the folder and see files of the specified extension (*.config).

  • Check info not displayed

    Hi, I'm looking up FBL1N for cleared items for a certain vendor. There are 4 clearing documents with doc type ZP. The payment method for this vendor is Check. The latest two clearing document has check information available (when i click on check inf

  • How do I select and delete images in Numbers?

    Hi, I need to delete some images in a previous saved numbers spreadsheet. I cannot select any image individually, if I click on one cell all images are un-selected automatically. After pressing ESC and then Cmd+A I'm able to select all images in the

  • Improving Student Self Service with jQuery/lightbox?

    We're looking for ways to improve the student self service experience via the enterprise portal. There are a couple ways we've seen to do this, either creating a new peoplesoft page that displays the desired data and linking to the Campus Solutions p

  • BSP Extension Composite Element with Body

    Hello, I created an own BSP Extension element "myLink" which should be a composite element containing HTMLB:LINK element. The myLink-DO_AT_BEGINNING looks like follows:   DATA: orgLink  TYPE REF TO CL_HTMLB_LINK.   orgLink = CL_HTMLB_LINK=>FACTORY( i