Airport Express starts up, green light for one second and then restarts. Is it shot?
Airport express (gen 1) starts up and flashes green for one second. Then steady amber and starts up again. I've tried to reset it but same resuld with ethernet cable or wifi. Any ideas short of buying another one?
Thanks,
CW
That's what I figured...thx!
Similar Messages
-
Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W. -
Muvo V200 Starts up for one second and then shuts do
Hi,
I bought my Muvo V200 two weeks ago and was delighted with the quality. Yesterday I went to use it and it starts up to reveal the Creative logo and then shuts down straight away. Now the computer wont recognise it either (although a graphic does appear on the muvo screen saying that it is connected to the computer). Ive tried updating the firmware but the installer gets errors. What do I do?Other people have had the same trouble so I don't think it's because you're in an Internet cafe, but it would be better if you had access to a PC that you could install the drivers onto. Without them you can't get into Recovery Mode.
Perhaps someone in the Internet cafe would logon as an Admin for you so that you could load the drivers and carry out the firmware reload?
Have you not got access to another PC?
PB -
it continues to say it is backign up, even though their is nothing to back up! I even downloaded and updated my ipod and itunes, and even restored my ipod, it wont let me add any music since it wont allow me to sync it. PLEASE! I NEED HELP!
Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up -
Why do my raw images (fr Nikon d800e) show up bright for 1 second and then darken in Aperture?
I'm new to this site so I apologize for the long question. When I import raw files from my Nikon D800e into Aperture (3.2.3), they show up bright for one second and then darken slightly. Is this normal? It didn't happen with raw files from my Nikon D300. I have to adjust the brightness and exposure to make them bright again. thanks, Mike
One of the changes in Aperture 3 as it has evolved, is to first use the Preview generated by the camera. It waits to generate its own Preview until you actually click to display that one image. Until then the thumbnails are based upon the camera provided JPEG Preview.
In earlier versions, you never saw that, but only the initial Preview generated in Aperture. It is not because of the different camera.
Btw, if you are using 10.8.2, why have you not updated to Aperture 3.4.3?
Ernie -
I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)
Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Do I connect my airport express to my modem via the WAN port and then connect from airport express to my imac with ethernet cable? Is that how you "hard wire" the connection? Because when I do that, I still can't get online. Thanks.
What is the make & model of your modem?
You pretty much stated the correct wiring. There should be an Ethernet cable connected between the modem and the WAN (circle of dots) port on the AirPort Express base station.
Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results. -
How to Upload the Materials for one Plant and then copy the same to all oth
Hi All,
I am using Material Types NonStock, Service, Spare Parts and Trading.
How to Upload the Materials for one Plant and then copy the same to all other plants.
can anybody give response for this requirement.
Regards...
<b></b>Hi,
Using MM01 Only we can upload Plant Details.
If you want to extend to other plant also, Use MM01 and select Plant view and give new plant details.
If you want to copy from one plant to another plant after selecting Plant view , next screen you can select From Plant and To Plant Details.
Reward Points If it helps you.
Regards,
Murali K -
I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?
Please post your problem in the Final Cut Studio (Final Cut Pro 7) forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
You'll get the help you need in that forum. -
This is the second time that I've downloaded an album and one song off of it will play for 3 seconds and then skip to the next song. I've tried everything under the iTunes help and nothing has worked. Any ideas?
Why can't you delete it and redownload it?
If still problem contact iTunes
Apple - Support - iTunes - Contact Us -
Firefox will no longer run on my computer. It's been working fine up until a few days ago. Installed the updates and now nothing. Uninstalled, reinstalled (numerous times). Click the icon and nothing. Hour glass comes up for a second and then it is gone. Running XP ver 5.1 (service pack 3) edit. I'm no techie so I have no clue what is causing this or what to do. I love firefox and miss it greatly. Anyone know what I can do to get it back?
Can you install a new profile? See [[Managing Profiles]] for me details and let us know if you need additional assistance.
-
Why do I get a black screen telling me to wait for 40 seconds and then to 'skip ad'?
I installed a Firefox update and since then, when I try to connect to a website, I almost always get a black screen telling me to wait for 40 seconds and then to 'skip ad'. This is very irritating and a waste of time. There are no ads to skip. Why is this happening and how can I stop it?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check the connection settings.
*Firefox > Preferences > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can -
Macbook Pro freezes, shuts off for 10 seconds, and then returns to normal
My 13.3" Macbook Pro has this issue of shutting off for 10 seconds and then turns back on to normal. Usually it happens whenever I wake the laptop with the lid open, whenever I open the lid "too fast" from clam shell sleep, and whenever I reopen the lid after when I realized that I needed to check something else. Every time I start using the Macbook Pro from these situations, everything works fine for about 20 seconds and then suddenly everything freezes and shuts off temporarily. Then after about 10 seconds, everything turns back on again. I do not know why this occurs, but I had this issue the 3rd week I purchased this. Is this a normal thing or is this an issue with possibly the motherboard?
take a look at this topic, maybe will help:
http://discussions.apple.com/thread.jspa?threadID=2420192&tstart=15 -
When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears. Then I click on it and for photos is a triangle with an exclamation point. It doesn't happen to all but quite a lot. how to I get them back
Have you recently deleted photos using the finder or run clean up software? Is so restore your backup
If not the backup your iPhoto Library and launch iPhoto while depressing the option and command keys. Rebuild your database
LN -
The calendar icon on my iphone 6 shows that I have 2 items in my inbox but when I click on it it takes me to the full year calendar, at bottom of screen it says Inbox (2) - when i click on that the screen goes black for a second and then defaults back to the home screen. Have tried everything, rebooting, reinstalling, refreshing - very frustrating - can someone help?
ThanksTry This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Maybe you are looking for
-
ORA-1555 ORA-3136 errors:: elapsed time vs Query Duration
Dear all, - My Database version is 11.2.0.2, Solaris. - We have been having a problem in the production database where the front end nodes start going up and down for couple of hours sometimes. ; When node flapping is going on we get connection timed
-
Hi all, I saw that I can call CRMXIF_ORDER_SAVE with multiple GUIDS..so I can process more orders by calling the function ones. Is it correct? I try to do this but sometimes if an error occurs on one order, other orders don't be processed. Can anyone
-
Good morning, after a leave request is approved, we want to make a calendar entry in outlook. We find the class CL_APPOINTMENT. On the whole it works, but we are not able the change the "show as" property. The appointment should appear as absent in t
-
Cannot unzip the image file from Sun
I have downloaded the first compressed install CD image file from Sun. But it cannot be unzip. I used almost all of the unzip software(such as Winzip, WinRAR, PKUNZIP for DOS and for Windows). Anybody can help me?
-
Air Web browser with drag out remote files
Hi I'm new in AIR so I have few questions. I want to create my own simple web browser where users can drag out files on desktop using links on web pages instead of normal OS download system. I've found function which works fine when I use static url