Airport express with mac and windows

No problems at all with mac and airport express but I have a vaio with window xp sp2 and a pc with vista home premium and even if they connect to the wireless network they cannot receive an ip address. How can I solve this problem? ( As always, we have to waste a lot of time when we work with microsoft operating systems... ;-)) )
Thanks

Thank you for providing me with the exact model of your PowerBook. This model was available with either an optional or built-in AirPort Card. This card is only able to connect to 802.11b wireless networks with a maximum bandwidth of 11 Mbps. This card is also capable of connecting to wireless networks that use the TKIP encryption protocol. This protocol is used in either the WEP or WPA standard. The card is NOT capable of connecting to wireless networks that use the AES/CCMP encryption protocol that is part of the WPA2 standard.
However, some of the earliest versions of the AirPort Card did not work with WPA's TKIP implementation ... so it is possible that you may not be able to connect to an AirPort Express Base Station (AX) configured for "WPA/WPA2 Personal." It may also be problematic to connect to the same AX if it is configured to use one of the 802.11n modes that offer compatibility to 802.11b/g clients. This latter item does not sound like an issue as you are connecting, but wireless security does.
WEP introduces its own set of "problems." Not to mention, that is it completely un-secure. The following Apple Support article may be helpful in getting all of your wireless clients connected when using WEP: Joining an encrypted WEP or WPA Wi-Fi network 

Similar Messages

  • External Hard Drive Compatible with Mac and Windows?

    So my old laptop is a Dell Latitude and I bought a Western Digital external hard drive and put all my files/pics/music on it. The information the WD came with said its compatible with Mac and Windows, but when I plug it into my brand spankin new Macbook, it doesn't register with the computer and won't show up. What's going on?
    Message was edited by: philliesphan

    I recently ran into that problem. In order to have the hard drive compatible for both PC and Mac it must be in a FAT32 format. In order to do this though all your files will be deleted (in order to reformat). You can do this by plugging in the hard drive into you mac and going under disk utility and there you will find your hard drive and under erase change the format to FAT32 and then you press erase (all will be deleted off the external drive though)

  • Airport express with Snow and wired Mac Mini?

    Hi,
    I am trying to help my parents set up airport express.
    They have a Mac Mini with no wireless card connected by ethernet to a Snow base station. That is fine, and computer sees the base station in Airport Admin. However, when I try to go to Airport Setup Assistant to set up the Airport Express, I get a message saying that the computer doesn't have a wireless card (which I know) and doesn't allow me to continue.
    Is there a known thing where you can't use Airport Express with a Snow base station without a wireless card? Any insight would be greatly appreciated.
    Thanks!

    Nevermind, I guess I answered my own question.

  • Configure airport express with mac book air

    I am trying to configure airport express with a Mac Book Air, without success; the program is installed, but then, nothing appears to configure Airpor Express...
    Can I get any help? Thank you
    António

    Hello!
    I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
    So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
    Any sugestion? Big houses are a problem...
    Best regards, and once again thank you!
    Antonio

  • How can I make an icon that links to a webpage that works with Mac and Windows??

    Hi!
    I burn CDs with my photos and send them to clients.   Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website .      Is it posssible to make one of these icons that works with both Macs and Windows machines?  Thanks!

    Now it works!  Thanks, Denico!
    The reason I saved to text:   The first time I followed your instructions, it did not work.   I tried to figure out what I did wrong and saw that you wrote to "save as plain text."   I did not know what this means and there was no option available to save a plain text.  So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant.   And after that, it worked!  But the next thing you know, the icons started duplicating themselves.
    I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
    Thanks for clearing that up.
    But just one question.  WHY does saving as "stationery" make an icon duplicate itself?

  • Best external hard drive format for use with mac and windows?

    This is more of an apple operating system combined with windows operating system question, but being that my OS will upgrade an fluctuate there is not option to choose in the operating system section.
    Anyways to the question(s)
    This whole prbolem came about when my computer started having issues, I want to back it up and whether I can continue to use my laptop or not I will still be owning an apple in the future. I went to buy a hard for back up and got told that it is not as easy as one would think to transfer files from mac OS to windows OS and vice versa. I have a mac, my boyfriend has a windows computer; we share files. Mostly I just copy his files, but once in a while I give him files too. I have read up and talked to people and only found one solution so far to format the external drive to fat 32 or exfat. I think only mac has the exfat option, but works well between both OSs, correct me if I am wrong.
    What is the difference between fat 32 and exfat?
    A user posted some good info about formatting. More specifically .Drives, partitions, formatting w/Mac's + PC's
    https://discussions.apple.com/docs/DOC-3044
    If I do not want to use fat32 or exfat is there a format type that works great for mac saving that I can still at least save files to that were originally on a windows computer? Such as I copy his files from his external drive to my computer and then save them to my external drive.
    Is there a better format for file sharing between mac and windows that does not set a 4GB limit?
    And a silly question, Can you dual format a hard drive?
    Note: This format is for an external hard drive.

    I still do not know which format would be the best. That is so that I can use it easily between mac OSX and windows. Is FAT32 the only true option? How limited is it? I heard it is limited to 4GB file size for windows and 32 GB for Mac. Are there other sources I have not found with more concrete information on the limitations of this format?
    I really do still need this information and I need to back up my drive before I can take the computer in for service.

  • 5g with Mac and Windows?

    Can I use my 5g ipod with both a Mac and Windows PC? I've been syncing with my Mac but I also have a PC. I downloaded the Ipod updater for Windows XP and installed it. When I connect my Ipod I receive a message that the Ipod cannnot be read and needs to be formatted. Will this formatting erase all data and not allow syncing with the Mac? Thank You,
    Charles

    Hi Charles, welcome to Discussions. You will need to reformat the iPod with Windows, then it work with the Mac. A Mac formatted iPod will not work with Windows. When it is formatted via the PC, you can resynch with the Mac, to upload your data. After this, set synch to manual, so you can use both computers.

  • Copy CD with Mac and Windows Files

    I have a CD, not copy protected that has both Mac files and Windows files on it. Specifically it is a Printer Driver CD.
    When I make an image of it with Disk Utility, the only files in it are the Mac files. I wanted to make a safe backup of the CD, including both the Mac files (for my PB G4) and the Windows files for when I install the print drivers on my new MacBook Pro using BootCamp.
    Any ideas as to how to make a copy of a CD that has both Mac and Windows files on it?
    Thank you

    Are you sure the Windows files aren't there? A lot of CDs are hybrids, and do not show the files that belong on another platform such as Windows. Put it in a Windows computer and check.
    Otherwise, buy a copy of Toast and dupe it that way.

  • Apple AirPort Express with Airtunes and Netgear WPN824v2 Router

    I'm having some trouble getting the AirPort Express with Airtunes to connect to a Netgear WPN824v2 network.
    Details:
    - Router: Netgear RangeMax Wireless Router WPN824v2
    - Wireless Network Security: WEP
    - Computer: MacBook Pro
    - OS: OS X 10.4.10
    - AirPort card in computer: this works fine - no problems
    - AirPort Express with Airtunes: the setup routine goes OK, but then the unit cannot connect to the wireless network; the light blinks amber.
    Could the problem relate to the password (Hex versus ASCII) or perhaps WEP versus WPA?
    Any / all suggestions welcome. Thanks.

    sonicdubster, Welcome to the discussion area!
    Are you following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode?
    Is the AirPort Express (AX) placed in an area where it can receive a good wireless signal from the Netgear?
    Does the AX connect if you disable wireless encryption?
    WPA (or WPA2) is much more secure and less troublesome than WEP. If all of your equipment supports WPA, I would switch to WPA.

  • What format for my external drive allows use with Mac and Windows?

    I got an external hard disk (1 tr) and i want to used it for my windows and mac, i read i can have two partitions one for mac and one for windows, but i dont really want to have two parts, and I read i can format it by fat32 and i can write and read on both os, is that true?
    I want to use it for movies, os backups, and files..
    Is it true that i can only save files up to 4 GB when the format is fat32?
    please advise..

    It this case you would need to to go to "Disk Utility" on mac and select 3 partions which will be under the Parition Layout in my screen shot below. "Current" is grayed out that will drop down select 3 partitions and make one NTFS, second Mac OS Extended, third FAT32. Using the FAT32 for both Mac and Windows but the files have to be under 4GB each.

  • Airport Express with MacBookAir & a Windows desktop

    New to Apple and stuck in the Lion wi-fi fiasco.
    Trying out an Airport Express router to replace my Netgear WNR1000 and if it works Il'l not worry about the why's and why nots.
    I understand I can use the MBA to manage the AE but then I won't have access to the net with my old desktop, which is cabled to my Netgear router.
    Is  this so simple I don't see the answer or is the old Windows XP desktop not going to fit with the Apple based hardware?
    If this would all work we'd upgrade the Windows XP to a Mac but no way I am doing that at this point.
    Thanks,
    Bill

    If your Windows desktop is not wireless, then yes....
    You will need to buy the Airport Extreme which has a built-in 3 port hub..
    http://store.apple.com/us/product/MD031LL/A/AirPort-Extreme?fnode=MTY1NDA0Mg
    View the back of the Extreme for connections on the above link.

  • Wireless internet with mac and windows

    hi,
    I have a ibookG4 version 10.4.8 and i have a Windows XP computer with AT&T/AOL.
    I am trying to install wireless internet on my IbookG4. I purchase an AirPort Express Base Station (Model # A1084)and try to connect it to my G4 but it did not work.
    Is there something else I need to purchase?
    I appreciate any help/assistance.

    You may just need to turn on the AirPort card that is already in the iBook.
    The following Apple Knowledge Base article may help you get it up and going:
    http://docs.info.apple.com/article.html?artnum=106424
    Please let us know how things go, and keep in mind that, with AppleCare, you can call any time for free assistance.
    Good luck, and let us know how things go.

  • Using Airport Express with Mac OS X 10.5

    Hi you all,
    can anybody help me. I just got my first mac (with Leopard) as well as Airport Express. somehow during the installation process my harddrive is not accepted as connectivity??? Did I do something wrong or does it have to do with Leopard and the compatibility of the Airport Express software?
    Thanks for helping me.
    Brommy

    Brommy, Welcome to the discussion area!
    Don't try to use the software on the disc that came with the AirPort Express (AX).
    Instead use AirPort software already installed in the /Applications/Utilities directory.

  • External HDD to be shared with Mac and Windows XP

    I wish to share an external HDD via firewire/USB between an ibook G4 on OSX 10.3.9 and Windows XP. Apart from using FAT32 and having partitions for each OS just in case can anyone share any risks considerations I need to be aware of? I intend on having a generic 320Gb Seagate drive installed into an aluminium box but for some reason Lacie seem to be particularly good with Mac's and I can't ascertain why.
    ibook G4   Mac OS X (10.3.9)   Acer Windows XP

    There appears to be some misunderstanding about what systems can read or write what hard drives.
    OS X can read and write HPS+ and FAT32 formatted drives, and can read, but not write to NTFS drives. Windows can read and write NTFS and FAT32 drives, and cannot read nor write HPS+ drives. Fresh out of the box the only read/write file sharing is via FAT32 drives.
    There are reasonable methods for expanding this capability.
    (1) Windows can be given the ability to read and write HPS+ drives by installing MacDrive 6 on the Windows machine. As far as I know there is no software available which gives OS X the ability to read and write NTFS drives - - maybe it exists or is under develpment somewhere.
    (2) Both OSX and Windows can read/write files that are on a networked file server regardless of the file system used by that file server. The server hides its underlying file system from clients. Just connecting a network capable HDD to a router is NOT the same thing as having a file server on the network - - the same basic file limitations still exist.

  • Sync with Mac and Windows issue

    I bought my wife an iPod (our first). I use a MacBook Pro and she uses a Windows desktop. I copied all of my iTunes music onto the new iPod for her from my Mac. I downloaded iTunes to her Windows machine and tried to sync with it, but it says the iPod must be reformatted for Windows and that will wipe out all of her music files. Is there a way that I can copy the music files to the Windows machine so that she doesn't have to use my computer to sync? These are not protected files. All were copied from our CDs.

    OK first thing to know is that Windows machines can not (without $$$ software) read Mac formatted iPod. However Macs can read and use Windows formatted iPods just fine. So go ahead and format the iPod on the windows machine.
    Next, you will want to transfer your library from the Mac to the Windows machine. If your library is smaller than the total capacity of the iPod, then you can plug the iPod into her Windows machine and then configure it (a checkbox) to enable disk mode. Eject the iPod and plug into the Mac. The iPod should show up in the Mac's iTunes, but also on the desk top as a disk drive.
    At this point it is a simple matter to copy the iTunes folder from the Mac onto the iPod. Eject the iPod, then plug it back into the Windows machine, and copy the stuff off the iPod (as a disk drive) to the Windows hard drive.
    Further help on the subject...
    Migrate Your iTunes Library from Windows to Mac (and keep your ratings, play counts and date added)
    http://www.tunequest.org/migrating-your-itunes-library-from-windows-to-mac/20061 105/
    A Guide to Switching iTunes from Mac to Windows (or Vice Versa)
    http://ipod.about.com/b/2007/03/11/a-guide-to-switching-itunes-from-mac-to-windo ws-or-vice-versa.htm
    Geek to Live: How to move an iTunes library from a PC to Mac (and back)
    http://lifehacker.com/software/itunes/geek-to-live--how-to-move-an-itunes-librar y-from-a-pc-to-mac-and-back-242468.php
    HOWTO: Move your iTunes music while preserving library data (when you don’t let iTunes manage your music library)
    http://hifiblog.com/past/2006/05/11/howto-move-your-itunes-music-while-preservin g-library-data-when-you-dont-let-itunes-manage-your-music-library/
    Cheers,
    Patrick

Maybe you are looking for