Airport Express won't work with Acer Aspire One

I've recently set-up a wifi network for my parents. They have a cable modem from which an ethernet cable runs to their Vonage modem. From there, another ethernet runs to the Airport Express (set to Bridge Mode). Wifi uses WPA2 Personal encryption.
My MacBook Pro as well as my dad's Dell laptop (Vista) can connect just fine and browse the web, no problemo.
However, my Mom's Acer Aspire One netbook (Win XP) keeps on saying "Acquiring network address" and kind of just hangs there. I've tried resetting the Airport Express to no avail. Does anyone have any ideas what could be causing this? I'm open to any suggestion guys, thanks!

I'll take a quick pass, but no guarantees as I'm not a PC guy.
XP, depending on the version installed on the Acer may not fully support WPA2 Encryption. Or, if it does, you may need to change some settings on the PC to use TKIP, not AES associated with WPA2.
It might be a bit easier to switch the security to WPA/WPA2 Personal on the AirPort Express and give that a try.
AirPort Utility > Manual Setup > Wireless Tab > Wireless Security.
The same TKIP/AES thing may still apply on the ACER though, so you'll need to investigate if things are still sticky on the ACER.
Finally, my PC friends tell me that 90% of all connection problems on a PC can be traced to the Firewall settings and/or anti-virus settings. You may have to go into the applications to specifically allow the connection to the Express.

Similar Messages

AirPort Express won't work with 7.0.2

Everything was fine til I bought a new Shuffle. It made me upgrade to 7.0.2, now my Airport Express won't work. I have firmware 6.2 and just uploaded all of the newest updates from apple.com for it (AX). The security is off on my network and the AX is connected with a green light. Still no option to choose my home stereo which is hooked up to the AX. HELP! I have spent all day trying to get this to work!!!!

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

Older model Airport Express won't work with Mountain Lion Airport Utility

just upgraded to Mountain Lion and noticed that of my network of three airport expresses connected to various stereo speaker systems throughout the house, one of the older models won't work with the supplied version of Airport Utility (v 6.1). Here is the message it gives in the utility when I attempt to select this particular Airport Express:
"This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support."
Well, I go to download v 5.6 and none of the versions available will install on Mountain Lion! (even the version for Lion) Catch 22.
Any resolution to this (other than having to go out and buy a newer version Airport Express)?
Michael

Learn how to install AirPort Utility 5.6 on Mountain Lion here:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Airport Express won't work with VPN

Finally made it through the nightmare of setting up my Airport Express to act as a wireless print server on my existing network (Linksys WRT54G router). However once I log onto my corporate VPN, I cannot print or even see the Airport. I have checked the LAN access box on the Transport tab of my VPN software which is supposed to allow split tunneling, but no luck. Everything works fine once I log off the VPN. I bought the Airport Express specifically because an Apple rep told me it would work with my VPN. My previous wireless print server (Linksys) would not support VPN.
Appreciate any help!

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

Airport express won't work with Extend Network, only Create Network

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings. If I change this to Extend A Network it doesn't work properly. It keeps kicking me on and off WiFi, but the former way works with no foreseen issues. What is going on? I can't extend my guest network with the first option, I don't believe.
I have a 5th Generation AirPort Extreme and a 1st Gen AirPort Express.

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

Not starting - for Android - as supplied with Acer Aspire One D255

''locking as a duplicate - https://support.mozilla.com/en-US/questions/886204''
Download'''bold text''' Not starting - for Android - as supplied with Acer Aspire One D255

Many thanks for a reply. It's good to get some feedback at least. I must admit I won't be too concerned if it's not compatible as I've since migrated to more useful tablet devices. This thing was always a bit of a mistake, especially with the annoyingly useless android bolt on. But as I use it for the occasional larger screen benefit and printer link, it would be good to have the benefit of latest MS. It still raises the question of why Acer at least can't provide a definitive list. After all there must be many other idiots like me that bought one? Thanks again
[subject line edited to reflect new topic]

D/L Not starting - for Android - as supplied with Acer Aspire One D255

D/L Not starting - for Android - as supplied with Acer Aspire One D255

Of course within a couple of hours of this post I figured it out.
I went to /etc/conf.d/gpm and added "-2" for two button mouse.
GPM_ARGS="-2 -m /sys/devices/platform/i8042/serio2/input/input8""
Now I can paste by simultaneously clicking the left/right buttons.
rs

Airport Express Won't work on Computers but works on other devices

I switched from att dsl to comcast internet. I set up my modem and then purchased an airport express to use as my wireless router. When I set up my airport express, I installed the airport utility on my windows vista laptop, was able to create a network, password, etc.. However, once set up, I could no longer find my airport express in my airport utility. My windows vista laptop, and windows 7 laptop can not connect to the internet. I also installed airport utility on the windows 7 laptop and that laptop cannot locate the airport express. However, my PS3, Wii, iPhones, and old XP desktop can all locate the network, connect and work very well.
Also, if I directly connect the ethernet cable into either laptop, they will connect to the internet fine. I have tried downloading drivers, changing security on both, resetting the airport, power cycling, and have not succeeded. I have no idea what to do next. I can not understand why most of my devices can detect the router and others can not. I know that the laptops can connect wirelessly because I brought them to my parents house to test them out and they both worked fine.

Hello akommatas. Welcome to the Apple Discussions!
Please try temporarily disabling the Windows or third-party software firewall on any PC that is having difficulties accessing the AirPort Express Base Station (AX) with the AirPort Utility. Can the utility find and access the AX now?
If not, instead of waiting for the AirPort Utility to scan, go to the utility's menu bar, and then, choose File > Configure Other ... > Enter 10.0.1.1 in the IP Address field, and then, enter public for the password.

Airport Express doesn't work with Mountain Lion

I installed Mountain Lion and now my airport express doesn't work as a way to play itunes through another set of speakers.
Not only that... but the airport utility doesn't support my airport express.
Time Machine doesn't work either....
I want my snow leopard back!!!
Any insight????

I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!! I'm not liking the switch at all. I've spent more time fixing problems with this ... how can I go back???

AirPort Express doesn't work with SB5100

I'm helping a friend set up a new AirPort Express MC414LL/A Model A1392 (802.11n) with her existing Motorola SB5100 DOCSIS 2.0 cable modem. I was able to setup the AirPort Express from her iPad with a network name and password. Also upgraded the firmware in the AirPort Express. However, the Airport Utility App on my iPad and iPhone connected to the AiPort Express, but showed no connection to the Internet. Furthermore, the PC that had been working fine when connected directly to the SB5100 could not make an Internet connection when connected to the AirPort Express.
I brought the AirPort Express home and connected it to my Verizon FiOS Actiontec modem and it works fine - my iPhone and iPad connect to it and through it to the Internet.
I'm wondering if the SB5100 is incompatible with the AirPort Express??

It should work.
Power down the modem and leave it powered down for a long time, as much as a half hour or longer is sometimes required. While it is powered down, disconnect its coaxial cable. Literally unscrew it and leave it that way.
Connect the Express to your modem, leave them connected, and do not disconnect them from one another without powering down the modem again.
Re-connect everything including power and let the devices complete their startup sequences. This usually takes a moment or two.
If that does not result in success, "hard reset" the Extreme or Express according to the instructions below and start over from the beginning.
If you still have trouble, contact AppleCare because you have done everything reasonable to get it to work.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

PXE with Acer Aspire One D150 ?

Hello
We are about to start testing Acer Aspire One D150 and I cant get it to
work with PXE boot, it wont find the NIC drivers. The NIC is "Atheros
something" and I dont even know where to start. Tha machine does not have a
CD so I cant boot with the boot-cd either...
I tried putting in the new imaging files from zdm7sp1ir3a_hp3 (feb -09) but
same result, coudnt find NIC.
Please advice.

How bloody hard can it be for the Novell-people to post an image which works
for Aspire one D150 ? I dont have the knowledge to compile this stuff
myself, I hate when this happens as soon as we are testing new hardware...
So... there isnt a working image today ? :(
/D
"mpullen" <[email protected]> skrev i meddelandet
news:[email protected]...
>
> Thomas--
>
> A couple of days ago 'I posted a similar request in this forum'
> (http://forums.novell.com/novell-prod...ml#post1753904),
> which included the information you've requested:
>
> Attansic (Atheros) AR8114 "atl1e" NIC (device ID 0x1969 0x1026)
>
> Same as Dan, we've tried using the 'Feb 2009 imaging driver update'
> (http://download.novell.com/Download?...d=aC2y2x_7o_Q~) (initrd dated
> 02/21/2009). The "atl1e" driver is -not- in that update, nor in the
> 12/20/2008 driver update (initrd 12/20/2008), nor the 11/18/2008 initrd
> we had been using originally. The atl2 driver apparently included in the
> 12/20/2008 update (but excluded from the 02/21/2009 update) -does not
> work- with the D150's NIC.
>
> The 'vendor website' (http://partner.atheros.com/Drivers.aspx) does not
> offer a Linux driver for the L1e NIC (the L1e is -different- from the
> L1); however, 'a source file'
> (http://jan.ucc.nau.edu/wal2/l1e-linux-v1.0.1.0.tar.gz) for a atl1e
> Linux driver is linked in an article at 'ATL1E Linux Driver for Ethernet
> controller: Attansic Technology Corp. Unknown device 1026 (rev b0)'
> (http://jan.ucc.nau.edu/wal2/atheros_attansic.html). Unfortunately, the
> build instructions there are for Ubuntu 8.04, which isn't helpful in a
> SUSE environment.
>
> I would love to learn to compile this myself, but cannot find a Linux
> environment in which has the right kernel source (2.6.16.60-0.21) for
> the Feb 2009 update (nor even for 2.6.16.46-0.12, the kernel from our
> previous stable imaging environment.) I've tried to 'follow the
> instructions in the Zen 7 Admin Guide'
> (http://www.novell.com/documentation/...a/a74bm8u.html),
> but don't quite have the Linux knowledge depth yet to fill in the gaps
> necessary to for it to work in our environment. Any hints on this would
> be welcome here; I'd certainly post a working driver back here if we can
> get one made!
>
>
> Thanks!
>
> Mike Pullen
> Computer Tech
> School District of Baraboo, WI
>
>
> --
> mpullen
> ------------------------------------------------------------------------
> mpullen's Profile: http://forums.novell.com/member.php?userid=46061
> View this thread: http://forums.novell.com/showthread.php?t=365473
>

Wireless with acer aspire one linux linpus

hi everyone, have just had replacement hh3 which is connecting ok wireless to my laptop, but my wife has little acer aspire one which used to connect ok but now wont, it does pick up the fon sometimes but i would like it how it was and connecting directly to the hub. it does connect ok using a cable but not wireless. any help or suggestions please.
Solved!
Go to Solution.

I would expect if you deleted all the existing wifi connections and then reboot. look for wireless connections available then select your ssid then connect - it will ask for key/password then enter then connect. it would normally save infor but I am not a linux user - works in windows
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Airport Express won't work with Acer Aspire One

Similar Messages

Maybe you are looking for