Airport extreme and DI-624 big problems

heya. setting up a wireless home network. 2 laptops, one WindowsXP and a Powerbook G4 with built in airport wifi. Router is a d-link DI-624. latest firmware on the router. cable internet connection.
Router is set up with no security, pretty much all default options (channel 6 , mixed b/g mode) the Windows XP pc connects no problems. But the instant i turn on the Airport on the powerbook, the router will reset itself, and keep resetting itself every 10 seconds or so. if i turn off Airport, everything goes back to normal for the router.
tried using an ethernet cable, the exact same thing happens. router resets itself instantly and keeps resetting itself. so it's not just a wireless issue. i can only deduce its a setting on either the mac or the router that isnt compatible.
Under the Airport section i can actually see the the SSID of my network but it can't connect to it (router always rebooting itself).
any special options i need to change in the router, or on the mac? all help appreciated.

Based on a search of this issue on the internet, this seems to an often reported problem with the DI-624. Did you just purchase this router - ie can you still return it. If so, I suggest you get a different make/model. There is no need to put up with this sort of hassle when there are so many other great wireless router products out there.

Similar Messages

  • Using an X-Modem M3 with an Airport Extreme and having iChat video problems

    Hi,
    I have been posting on the iChat section over the last week or so regarding a big problem I have with iChat4 Video. I have been getting some great help over there, but it has been mentioned to me that I may be able to pick up some help in this Topic regarding any more detailed known issues on the X-modem M3 or Airport Extreme.
    I am still very new to this Discussion board use, so I hope it's ok to jump in like this and post a link to my ongoing discussion in iChat. See below.....
    http://discussions.apple.com/thread.jspa?threadID=1323485&tstart=0
    I didn't want to copy all of my message again into here as I thought it best that if you can help you could use the link.
    If anyone can help throw some light on this, then many thanks.

    The X-Modem in the default modem mode has no influence over the data being transferred. It is a modem not a router so it does not block any communication ports. Your iChat problems must be either on the Airport or the computer.
    Seeing as how iChat works fine when the modem is connected to the computer via Ethernet it shows that the modem is working fine and that your ISP doesn't seem to be doing any blocking that would prevent iChat from working.
    It really looks like the Airport Extreme is the culprit, perhaps the firewall on the computer is not properly allowing iChat to tell the Airport what ports it should open. Have you tried switching the firewall off completely at both ends ? Seeing as how the computers are behind Airports there is no need to worry about turning the firewall off for testing.

  • Airport extreme and Netgear powerline extender problem.

    II setup a Netgear Powerline Extender/Adapter on my airport extreme network. Followed all the instructions to get the extender/adapter to see each other but when i finally plug the Adapter via ethernet into my airport extreme, i lose internet connection and airport utility no longer can see my Extreme which i use as the base station. What am i doing wrong?

    If you verify that the LAN ports are all working on the AirPort Extreme, the next troubleshooting step would go as follows:
    Plug both power line adapters (PLA) into the AC sockets
    Connect your computer using an Ethernet cable to the "remote" PLA
    Connect an Ethernet cable from the PLA near the AirPort Extreme to one of the LAN ports on the Extreme
    Can you get a good Internet connetion on your laptop at the "remote" PLA end?
    If yes, then we have verified that the connection is good through the "remote" PLA.
    What device to you plan to connect to the "remote" PLA?
    If you cannot get a good Internet connection at the "remote" PLA end on your laptop, try another Ethernet cable just in case. If that does not help, there is likely a problem with one (or both) of the PLA devices...since the Ethernet signal is not being delivered to the "remote" PLA.

  • HT4628 Intermittent reception when streaming music via Airport Extreme and Airport Express to powered speakers. Is this a problem with the Extreme?

    i get intermittent reception when I stream music from I Tunes via Airport Extreme and Airport Express to powered speakers. I Tunes continues to play uninterupted on the Mac.  The problem does not lie with the Express as it occurs on both of my 2 Express at the same time. is this a problem with the Extreme?

    Well, repying to my own post... Might have found the solution: I tried to do the same with a Macbook Pro 2010 using the very same setup. And it worked perfectly! No freeze, no nothing.
    One explanation I see:
    my iMac is dating back to May 2007, a Core 2 Duo 2,16Ghz with 2 Go of RAM.
    So the computer's characteristics (or the Wifi component or the combination of all of this) might be not robust enough to allow streaming to those 2 devices...
    Anyone's got anything to add?

  • Airport extreme and HP printer over ethernet problem

    I'm new here, so forgive me if this topic has been done to death. I'm running airport extreme and have an HP photosmart 2600 connected to it via ethernet. My wife has no trouble printing with her Macbook Pro (Snow Leopard), but my daughter's older iMac only prints very intermittantly and mostly not at all.I've tried all the sharing options and reinstalling/updating the HP software, but no luck. The printer is at the other end of the house from the Airport, so connecting via usb is not an option. Any assistance much appreciated, thanks.

    Using Ethernet should give the best results, plus it allows the use of more than just the print function, which USB would not. Proof of that should be the fact that this older HP model (it works with OS 9!!!) works well with your recent Mac's Snow Leopard OS.
    If the iMac has OS X 10.5.8, the correct printer driver should have already been installed and no further update would have been needed. All that should have been needed was to open the Print & Fax panel of System Preferences and add the HP printer as the iMac's default printer.
    When the iMac was first unable to print using the HP, did you consider any chance that the iMac was too far from the Extreme, or that there might have been some interference involved? Did you power cycle starting with the modem? When power cycling is necessary, printers seem to throw off unexplainable errors (such as out of paper or ink, paper jam - when none of these is true).

  • I have a new Airport Extreme and an old airport express.  I am getting an amber light on the new Extreme and a green light on the Express.   I have internet no problem but the status light is blinking amber

    I have a new Airport Extreme and and old airport express.  I am getting an amber status light on the Extreme and a green light on the Express.  The Extreme is blinking amber all the time.
    I have internet and everything seems to be working.
    I have reset and pulled the power cord on both the extreme and the internet block
    How do I make it Green?

    If things seem to be working OK, but the amber light is flashing......the AirPort Extreme has a message for you. To see what that might be......
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon
    Click on the amber dot in the small window
    It might be a message that a firmware update is available for your AirPort Extreme.

  • New Airport Extreme and iPhone Issues

    I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
    So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....    
    Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
    Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
    So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
    Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

    I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
    Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
    Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

  • Airport extreme and express not acting as i would expect

    i have a virgin media super hub which won't transmit my wireless all around my house so i have set this to modem only mode and have connected it to a 4th gen extreme via a cable and connected 1 desktop pc to the extreme also via a cable.  All works perfectly and i get the full 60mb broadband that i pay for and all wireless devices also connected to the extreme achieve this speed. Unfo although better it still isn't enough to transmit through the whole house.
    To rectify this i have bought a new express and connected it all up which as expected was a doddle, the problem is that when i connect to the express i get a speed of between 2 and 12mb but never any more. When i spoke to the guy in store i was told that i would get the same speed from the express as i got at the extreme so is this not the case or have i got a setting wrong?

    1. EOP (Ethernet over Power) Sometimes called Homeplug. When you don't know stuff.. google it.
    http://en.wikipedia.org/wiki/HomePlug
    Get trained by little kids on youtube..
    https://www.youtube.com/watch?v=i72DM0dbGpc
    They are readily available from any of the big computer stores.. in every brand under the sun. Including ones you have heard of and some probably not.. internally they are all about the same.
    2. The old roaming instructions are the last apple produced.
    http://support.apple.com/kb/ht4260
    Here is my take on it.. with lots of screenshots.
    Problems with Airport Extreme Ethernet roaming setup
    Here is a joint effort from users here.
    Setting Up Roaming - New AirPort Extremes and Utility
    Main things to notice.. This is simple. Follow the instruction in my thread above.. and it works.. but I find the airport utility might need a bit of a kick now and then to get the right setup.
    3. Make it easy on yourself. You are trying to do too many things at once.
    Reset the express.
    Plug it into the Extreme by a patch ethernet cable.
    Do the setup.. as per..
    Problems with Airport Extreme Ethernet roaming setup
    Once you complete the setup.. take the express upstairs and plug it into the EOP adapter.
    If it fails.. plug a computer by ethernet into the EOP adapter and see if you are connected.. you might be blaming the wrong thing.

  • How do you connect Airport Extreme and share HP Photosmart 3210 Printer?

    Hello,
    I have a Mac and PC Network composed of:
    iMac 24'' Leopard 10.5.2 (main computer)
    2 PC Fujitsu Pentium 4 on Windows XP
    2 PC HP Pentium 4 on Windows XP
    my network/connections are done via Airport Extreme and 2 hubs (other devices connected to the network like Wii, XBox etc.)
    I am trying to share my HP Photosmart 3210 using the USB connector on Airport Extreme but I am experiencing strange problems while printing from the iMac. I can print an e-mail or a "light" document however if I want to print a Mac powerpoint (Mac office) largest document, the problem starts after the second or 3rd page, the printer goes on pause at the middle of the page and the interface indicates "problem communicating with the printer" or something like that.....unique possibility is to turn the printer off and start again but the problem persists. However, it seems that the printer works ok from the PC's.
    I have tried to install the latest versin of the HP driver on my iMac but while configuring, the printer doesn't appear....I have checked on the printer settings and the IP address is 0.0.0.0.
    I am now thinking about connecting the Printer via one of the Ethernet port on Airport Extreme.
    Questions:
    1. Any help on the above ? Any advice ?
    2. Is it normal to have no IP address on the printer when connected via USB on Airport Extreme ?
    3. Why HP config doesn't recognize the printer on the network ?
    4. Why does it work from the PCs and not from the iMac and why does it print light documents and not big ones ? Is this a memory7buffer problem on the printer ? What can I do if this is the case ?
    5. On the Airport Extreme Utility, do I need to share the printer via "Bonjour"?
    6. I am willing to plug an extrenal HD on the Airport Express USB port. Is it possible to put first a multi USB port on the Airport Extreme USB or is it going to cause problems ?
    Thanks a lot for your help.
    P.
    Message was edited by: vador300
    Message was edited by: vador300
    Message was edited by: vador300
    Message was edited by: vador300

    NCBob, Welcome to the discussion area!
    If I understand correctly you are replacing the Linksys. It should be a simple replacement. Connect the cable modem to the WAN port on the AirPort Extreme base station (AEBS). Connect your Ethernet devices (including the switch) to the AEBS LAN ports.

  • I'm having a hard time setting up my external hard from with my AirPort Extreme and Time Machine Backups.

    I have been using a Mac Mini with an external hard and Time Machine.  I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme.  I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme.  I have been using the optical drive from the Mac mini to load programs into the Mac Book Air.  I think I'm just getting confused in Finder.  I am just not seeing the hard drive.  I ended up plugging the hard drive back into the Mac Mini and that is work fine again.  How do I setting the external hard drive up to the AirPort Extreme and use for both computers?  Or at least to start with the Mac mini.

    It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
    If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
    So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
    To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to.

  • Airport Extreme and external HDD - cannot be found under Windows (XP/Vista)

    Dear All,
    I am about to loose it. I have an Airport Extreme (7.4.2), most recent version (802.11n)connected to my cable modem. Attached is a 2TB HFS+ Formated HDD. I have a number of machines. My primary machine is a Dell XPS with Vista and MacDrive installed.
    Now: On my AirPort utilities through the Dell the different HDD's connected via USB (I have tried half a dozen) are all visible. They are shared and I have tried all options, e.g. "with Disk Password" etc, tried to give and deny access to guests etc.
    I have tried various things incl. switching off the firewall has not been a success either. I am basically ready to buy a Mac now, but I am worried that the problem will persist for all my Windows based PC's.
    Who can help with a step to step guide? tried the TCP/IP settings on the XP machine as well (entering the IP address of both Airport Extreme and Express).

    Hi!
    I've got the same problem as of Friday when I upgraded my Notebook from XP to Windows 7.
    It does not recognize the HDD anymore, neither on the Windows7 Notebook nor on 2 different XP- PC's.
    I disabled the password functionality and removed the HDD several times, no change.
    When I look to the data volumes overview in the system settings, all internal HDD's and the CD partition of the Toshiba drive are shown. The HDD partition of the drive is shown as "non allocated".
    Is there any workaround to get access to the data????
    Best regards,
    Helmut

  • How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

    I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer.  So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only.  How to I make the connections?

    Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC.  I've had the Airport Extreme for a year or so.  The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems.  I was expecting the same with the TC.  But the instruction that came with TC say to connect the printer to the TC via USB...which I did.  And the print function worked perfectly but nothing else.  In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else.  I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way.  But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems.  I may try that again...and see if I can get all print functions with just the TC connected
    As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this.  Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
    Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
    After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup.  I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart.  But now I find that the connection only lasts for a short time.  If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
    So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
    So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct?  Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
    Thanks...

  • How to setup a network with a time capsule, airport extreme and an airport express?

    Hello.
    First I want to make it clear all my knowledge off wireless networks is going on forums on the internet, before a couple of months ago I didn't realize wireless networking was so intricate so forgive my lack of experience.
    I just bought a time capsule (today, 4th generation), I have an airport extreme bought in January 2011 (they just got refreshed so mine is now one generation old) and the same with my airport express (bought in January). 
    I originally bought the airport extreme and setup a wireless network using the dual band setup.  I have no issues with the 5ghz network and most of my devices run on wireless n so I had no issues with them.  my only two wireless devices that can not use the 5ghz network is my iPhone 4's which use wireless n but it has to use the 2.4ghz signal.  Problem is in my apartment I am bombarded with other peoples 2.4ghz networks so my signal is terrible 10-15 feet from the airport extreme.  Near my extreme I am getting signal ranges around 15mb to 20 mb.  When Im about 15 minutes away in my bedroom (so one wall in between) my signal plummets to 1-2 mb. sometimes as low as 0.17mb which is not good.  I got the airport express to extend my range and placed it in my bedroom. .  After setting up the airport express the signal still was terrible.  I researched and realized that if the signal strength ***** then the airport express cant boost the signal as much which makes sense in hind sight.  I then researched setting up a roaming network or a WDS network.  Per research a WDS network was not recommended b/c I was not using a wireless g network.  I attempted to create a roaming network and then realized that you can not use an airport express in a roaming network.  This has led me to now buy a time capsule.
    First, in my setup do I or should I have the time capsule as the primary?  I believe its more powerful than the airport extreme but Im not sure if that matters in a network that is distributing wifi from ethernet (thats how I am connected the extreme and the time capsule)
    so can I do
    cable modem ETHERNET  Airport extreme(in the living room where its always been and works great in that immediate area) (3rd generation)  ETHERNET Time Capsule(in the bedroom where I usually get poor signal) (4th gen)  and then an airport express connecting to the 2.4ghz signal in the bedroom where the time capsule also is EXTENDING the wireless range?
    or should it be the time capsule first bc its more powerful? 
    I tried setting up this setup and everything is green but I don't know if what I am doing is actually working on full cylinders b/c I am confused on some aspects.  mainly  on the airport extreme which is the primary device I have under the wireless tab selected create a wireless network and on the time capsule it also is on create a wireless network with the network name being exactly the same.  Should it be changed to extend a wireless network? and then bridge mode?  Should I have different channels for the different devices that are on 2.4ghz? 
    I am open to hear ANY suggestions, or ideas to improve my setup.  PLEASE PLEASE HELP!!!!!!!, lol  its been 5 long months of poor internet in my bedroom where my wife has her setup with a roku box and wifi tv (I have those hardwired for now) but mainly for her iPad and iPhone b/c its so bad sometimes she has to turn wifi off and use 3G.  I have same issue in my bathroom, sometimes Im getting decent signal and sometimes its so bad I can't open the link on an RSS feed in safari which I have to assume doesn't require that much bandwith?
    I have no wireless g devices.  The only device I need 2.4ghz for is my iPhone 4's but they both use n also.  All my other deivices connect on 5ghz and my 5ghz network is decent, a lot better than the 2.4ghz network atleast.

    You wrote so much that I find it hard to address all your concerns.  However, here are some thoughts:
    1) I'd configure the Time Capsule as the "main" router, connected directly to your cable modem.  Configure it to "create a wireless network" and to "Allow this network to be extended".  Configure the other devices to "Extend a wireless network".
    2) Put any device that's extending the network half way between the main router and the wireless clients.  If the signal from the main router is weak at the cllient's location, then the extending device will also receive a weak signal.

  • I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device

    I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device. If so would I have to format it with two partitions , one for time machine and the other for network storage. Aprreciate any advice

    If you have the hard drive connected to the AirPort Extreme....it is a network storage device.
    One issue that you may want to think about is that Apple does not support Time Machine backups to a hard drive at the USB port at the AirPort Extreme.
    In spite of this, some users who try this are able to make it work. Others have some limited success and some have no success.
    It's not supported....so there will be no help from Apple in the event of problems.
    If you decide to proceed with this, make sure that the partition for Time Machine backups is formatted in Mac OS Extended (Journaled) as other formats will not work with Time Machine.
    Having a secondary backup plan would also be something that you might want to consider.

  • Help With Airport Extreme and External Hard Drive

    I just purchased the Airport Extreme and I couldn't have been happier. I have attached my western digital external hard drive, but I have run into a slight problem/dilemma which I'm hoping someone who is apple savvy can help me out.
    I live in a house with a couple of other guys and so I put all of my movies and media onto the hard drive so we can stream it throughout the house, but how do I make sure that someone won't accidently delete the files (The copies on the hard drive are the only ones I have)? I have tried to right click "get info" and change the sharing & permissions properties on the folders that I don't want deleted, but it doesn't save the changes or even allow me to select another option other than Read & Write. I formated the hard drive with the disk utility before I connected it to the AirPort so I know that it has nothing to do with the format of the drive. I also tried to create different user accounts for each roomate so that they could view the files (Read Only) but I get an error message explaining that if I continue, the contents of the hard drive will not be accessible. I'm sure its something simple but I'm obviously missing it.
    Thanks!

    Airport Utility under Disks/File Sharing has guest access rights.

Maybe you are looking for