AirPort Extreme and PS3.

Hi,
OK, Few weeks ago I got the PlayStation 3, and i have set everything in the AE and on the PS3, somehow it is impossible for me to connect to the internet wirelessly via PS3, is it possible that the AE will somehow block the PS3? it says : [on ps3] Cannot connect to internet, there was a problem resolving the name with the server. I know I know "you should post this on the PS3 forums" but before i quit the idea of connecting to the internet with my PS3, is there something with the AE that somehow blocks the PS from connecting, and yes the AirPort has b/g as an option so drafts are no problemo.
Thanks in advance
-Victor

Hi,
OK, Few weeks ago I got the PlayStation 3, and i have
set everything in the AE and on the PS3, somehow it
is impossible for me to connect to the internet
wirelessly via PS3, is it possible that the AE will
somehow block the PS3?
No. I have a PS3 with firmware 1.8 and an AEBSn with firmware 7.1.1, using WPA and using 802.11n + b/g compatible. The setup works flawlessly. I've done the last 3 PS3 firmware updates wirelessly through the AEBSn.
it says : [on ps3] Cannot
connect to internet, there was a problem resolving
the name with the server. I know I know "you should
post this on the PS3 forums" but before i quit the
idea of connecting to the internet with my PS3, is
there something with the AE that somehow blocks the
PS from connecting,
Nope.
and yes the AirPort has b/g as an
option so drafts are no problemo.
Have you tried to put the PS3 "real close" (I mean 2-3 feet) to the AEBs, and see if that works?

Similar Messages

  • How to get nat type 1 with airport extreme and ps3?

    I use airport extreme as my default router. I have my ps3 connected to a separate airport in a different room. I can only get nat type 2 and want to get nat type 1 as I can barely connect to any hosts online.

    NAT type 1 is when you connect your PS3 directly to your modem with no router in between.  The problem with this is that there will be no way to share your internet connections with other devices.  NAT type 2 is where you have a router in between your modem and your PS3, and NAT type 3 is where you have some or all needed ports blocked which is where you would have issues.
    NAT type 2 is a correct way for your PS3 to work, and your wireless connection strength may be the reason for connection issues.

  • Setting up airport extreme and ps3 from nat tyoe 3 to nat 2(for dummies)

    i believe the subject says it all, i keep getting nat three on my ps3 and i need a step by step dummie proof for someone who has alot of tech **** and doesnt know how to use it.

    i believe the subject says it all, i keep getting nat three on my ps3 and i need a step by step dummie proof for someone who has alot of tech **** and doesnt know how to use it.

  • I'm having a hard time setting up my external hard from with my AirPort Extreme and Time Machine Backups.

    I have been using a Mac Mini with an external hard and Time Machine.  I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme.  I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme.  I have been using the optical drive from the Mac mini to load programs into the Mac Book Air.  I think I'm just getting confused in Finder.  I am just not seeing the hard drive.  I ended up plugging the hard drive back into the Mac Mini and that is work fine again.  How do I setting the external hard drive up to the AirPort Extreme and use for both computers?  Or at least to start with the Mac mini.

    It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
    If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
    So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
    To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to.

  • Airport Extreme and external HDD - cannot be found under Windows (XP/Vista)

    Dear All,
    I am about to loose it. I have an Airport Extreme (7.4.2), most recent version (802.11n)connected to my cable modem. Attached is a 2TB HFS+ Formated HDD. I have a number of machines. My primary machine is a Dell XPS with Vista and MacDrive installed.
    Now: On my AirPort utilities through the Dell the different HDD's connected via USB (I have tried half a dozen) are all visible. They are shared and I have tried all options, e.g. "with Disk Password" etc, tried to give and deny access to guests etc.
    I have tried various things incl. switching off the firewall has not been a success either. I am basically ready to buy a Mac now, but I am worried that the problem will persist for all my Windows based PC's.
    Who can help with a step to step guide? tried the TCP/IP settings on the XP machine as well (entering the IP address of both Airport Extreme and Express).

    Hi!
    I've got the same problem as of Friday when I upgraded my Notebook from XP to Windows 7.
    It does not recognize the HDD anymore, neither on the Windows7 Notebook nor on 2 different XP- PC's.
    I disabled the password functionality and removed the HDD several times, no change.
    When I look to the data volumes overview in the system settings, all internal HDD's and the CD partition of the Toshiba drive are shown. The HDD partition of the drive is shown as "non allocated".
    Is there any workaround to get access to the data????
    Best regards,
    Helmut

  • I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

    i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

    It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
    I Hope I Was Able To Help You Or Solve Your Question.
    Simmm
    3/12/2012
    If Someone Helped You, Click
    "This Helped Me"
    If Someone Solved Your Question, Click
    "This Solved My Question"

  • I just replaced my airport extreme and now the amber light on my airport express is flashing and so it is not being recognized.  I have been on the computer and gone to airport utility and it is simply not showing up at all.  What can I do?

    I just replaced my airport extreme and now the amber light on my airport express is blinking.  When I go to utilities and try to find the airport express it does not show up.
    What should I do?

    Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

  • New Airport Extreme and iPhone Issues

    I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
    So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....    
    Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
    Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
    So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
    Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

    I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
    Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
    Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

  • Regarding the product time capsule...is the modem the same as airport extreme and is the disk drive always running? I'm worried about it lasting for at least five years.

    Regarding the product Time Capsule... is the modem the same as the Airport extreme and is the disk drive always running??? I'm worried about it lasting at least five years.

    John,
    I'd pay good money to bet it wouldn't last 5 years... I don't rate the in built power supply and as for "server grade hard disk" - Hmmmm..... The failure rate of all HD's on the market after 3 year is 60%.
    Regards,
    Shawn

  • Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

    Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

    Yes, if the drive is formatted in Mac OS Extended (Journaled).
    The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

  • How to Set Up Time Capsule With Airport Extreme and Airport Express

    Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
    Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

    evelK wrote:
    Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
    Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
    I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

  • How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

    I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer.  So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only.  How to I make the connections?

    Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC.  I've had the Airport Extreme for a year or so.  The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems.  I was expecting the same with the TC.  But the instruction that came with TC say to connect the printer to the TC via USB...which I did.  And the print function worked perfectly but nothing else.  In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else.  I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way.  But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems.  I may try that again...and see if I can get all print functions with just the TC connected
    As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this.  Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
    Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
    After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup.  I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart.  But now I find that the connection only lasts for a short time.  If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
    So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
    So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct?  Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
    Thanks...

  • My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

    My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
    I am running OS 10.7.5
    Both the TC and AE are updated to 7.6.1
    The Seagate drive in formatted: Journaled HFS+
    I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
    "Next"

    It sounds like you may be confusing "mount" with "recognize".
    Connect the drive to the USB port on the AirPort Extreme
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Edit
    Click the Disks tab
    Does the AirPort Extreme "recognize" your hard drive?  If yes, it will be displayed in the window.
    See example below of a WD 500 GB drive connected to the AirPort Extreme.
    If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply.  The USB port on the AirPort Extreme and Time Capsule is under powered.
    Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

  • I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

    I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

    Extending using a wireless connection always results in a performance compromise.
    If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
    Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
    If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
    Post back to let us know which way to you want to go.

  • I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

    I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

    Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
    Sorry, but no.
    Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
    Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

Maybe you are looking for