Airport Extreme N not working with a PC

As the title notes, the PC I'm trying to set up will not connect with my Airport Extreme N, it's trying to connect through a USB WiFi adapter (no built in WiFi or WiFi card). When I turn all security off on the Airport Extreme N it will connect easily, but when I turn WEP back on it will not connect. When WEP is turned on it also claims that the wireless network is a WPA network, which I think might be the issue (the fact that its reporting different security).
The PC is running Windows XP Service Pack 2.
An iBook G4, PowerBook and Macbook all have no difficulties connecting. An old iBook G3 (with 802.11b Airport card) is also reporting that the network is WPA encrypted (but I believe that its airport software might be outdated)
I could obviously change the security on the AEn to WPA but I would be unable to connect my Nintendo DS to the WiFi network then, as it only accepts WEP keys.
Anyone got a clue?

What does a Windows compatible password entitle?
I've also tried the hex equivalent of the password, and it wouldn't take that either.

Similar Messages

  • Airport extreme card not working with leopard / G5

    I just upgraded my PowerMac to leopard (G5 dual 1.8, 3 gigs of ram, 250 GB HD). I bought it new in December 2004 from apple. Previously I had been using a USB adapter to connect to my wireless internet at home (Linksys WRT54G). This device does not support leopard so I got an airport extreme card from gainsaver.com.
    The Airport extreme card is configured properly as far as I know but it will only connect to my network for about 5 seconds then it drops. The USB adapter worked perfectly in the same spot and my macbook right next to it works fine as well.
    1. Could it be a bad Airport extreme card?
    2. Is this a known issue? And possibly be resolved with the 10.5.2 update?
    It is a fresh Leopard install with no updates as I can not connect it to the internet to get them. Any help would be very much appreciated.
    Message was edited by: anthonylkelly

    Hi, I have the same machine (4 ram slots?) have you got the connector for the aerial that connects to the motherboard attached to your airport card. Mine works a treat.

  • Airport Extreme ethernet not working with Windows XP

    Windows XP no longer connects to the Internet via the Airport Extreme ethernet port. XP says the cable isn't plugged in but when I connect XP directly to the DSL modem it works fine. When I connect my MacBook Pro to the Internet through the Airport Extreme ethernet port it works fine. (I'm sure it's connected by ethernet because I do +sudo ifconfig en1 down+.) I can't figure it out. I'm relatively certain Airport Extreme is blocking XP from connecting via ethernet but I'm not certain. It worked without a glitch for about two years. Lightning fried my old DSL modem and ever since I got the new one, XP "can't see" Airport Extreme, but will connect directly to the DSL modem and the net without a hitch. Any insight will be much appreciated.

    I'm not sure why your PC is not able to connect to the AirPort Extreme Base Station's (AEBS) Ethernet port, but it is likely the lightning strike may have something to do with it. I'm also a bit surprised you're were able to run the "sudo ifconfig" command under Windows.
    To rule out general communications issues between the modem and the AEBS, I suggest that you try a complete power recycle of all your network components as follows ...
    Try the following, in order, checking for Internet access after each step, until resolved:
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    Modem/Router Power Recycling - Quick
    o Power-off the modem, AEBS, & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the AEBS; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the modem; Wait at least 15 minutes.
    o Power-on the AEBS; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

  • Will my airport extreme 2nd generation work with docsis 3.0 cable modems?

    Will my airport extreme 2nd Gen work with docsis 3.0 cable modems?

    RRoger, everything is working fine.
    So, what is the actual problem here?  You are now wondering if the Vonage can handle the speed from the modem? Is that the "problem" after all this discussion?
    now I am wondering if my current setup will allow me to get docsis 3.0 speeds.
    What speed is your Internet provider delivering to you?
    The AirPort Express uses 100 Mbps Ethernet ports, so it will handle up to 100 Mbps. We have already told you that.
    Vonage likely does the same. The answer is almost certainly "yes" .......both the Vonage and AirPort will handle the speed from the modem.
    If you want to double check this, please provide the model number of the Vonage,  and we will try to look up the specifications for the device. If you have documentation there with specifications for the Vonage device, check to see if the Ethernet ports are listed as 10/100. This is standard with almost all devices, with some of them handling even higher speeds 10/100/1000.
    Chances are, your network will handle a lot more speed than your service provider is supplying to you. So, the "choke" point on your network may very well be your service provider and modem......not the Vonage and AirPort.

  • Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Please locate the model number of the AirPort Express and post back that information.
    The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
    We are not sure what you mean by "does not work".  Does this mean that the AirPort Express worked at one time and has just recently stopped working?
    Have you installed a newer operating system on your iOS device recently?
    Or, is this a new AirPort Express that you are trying to configure for the first time?
    If yes, what service will the AirPort Express perform on your network?
    Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

  • Airport extreme won't work with usb drive

    I bought a USB hard drive and formated OSX extended journaled on my MBP.  I plug it into my Airport Extreme and the AE will not recognize that a drive has been connected?  If I plug it back into my MBP there is no problem.. it works.. but the AE does not recognize its existance.
    I've seen many others online who've had the same problem...  some have said plugging a powered USB hub into the AE and then adding your drive to the hub works.. but this seems like a rediculous work-around.
    Does anyone know WHY this is happening?  Very frustrated that the Airport Extreme does not JUST WORK.
    Tim

    We understand that the drive works if you plug it into your Mac.
    Please list each and every step that you are performing when you now attempt to connect the drive to the AirPort Extreme.
    Where are you expecting to "see" the drive on your Mac?

  • Need Help...my wireless airport express will not work with my update of snow leopard

    after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

    If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

  • Airport card does not work with Airport Extreme when security is turned on

    I have an iMac running OSX 10.4.11 with an Airport card installed (firmware version 9.52).
    I recently replaced my Netgear wireless router with an Apple Extreme Base station and now I am not able to connect my iMac to the wireless network when WEP security is turned on - I get an error from the Airport Setup Assistant when I attempt to connect to the wireless network.
    It works fine if the wireless security on the Extreme Base station is turned off.
    Please help and thanks in advance.
    Motasim

    First, I highly recommend that you switch to either WPA or WPA2 as WEP is no longer considered secure. If you must use WEP, I suggest that you try the following:
    o Re-create the Network Name (SSID) on your AirPort Extreme Base Station (AEBS)
    o Try using 128-bit WEP, with a 26-Hex character key for the encryption type.

  • TS1253 i have airport extreme, and printer works with my imac, but not with my mac book pro??

    i tried setting up the printer under my wireless network only, and using the printer information, tried both and nothing works, my imac's same settings for the printer, and just cant get it to work.
    i am ussing airport extreme, and it shows printer conecting etc. but then it says not programed correctly and it fails.
    i dont know what else to try, i have followed every step on the manual, and nothing works..
    someone help me

    Could you open System Profiler on the iMac and the MBPro and select the Printers entry. Then in the top right pane you can select the printers entry and the bottom right pane will show information about your setup. Can you copy this information from both Mac's and paste back here.

  • Airport Extreme no longer working with DSL

    I have a Westell B90 DSL modem connected via ethernet to my Airport Extreme (using DHCP) and the two have happily co-existed for four years. About two days ago, it stopped working. It seems the AE can't get an IP address from the modem. The modem still assigns an IP address and works when connected directly to my Macbook Pro (that's how I am connected now). I also have an Airport Express that I use for music and signal relay. I tried to use it as the base station - that also failed to get an IP address. Help!
    thanks

    Thanks. I was suspicious of Verizon, but I spent an hour on the phone with them yesterday and they swore it was not their fault. Anyway...
    The modem is not acting as a router as far as I know. It is a fairly simple box with just a power plug, phone line jack, usb jack (unused) and the ethernet that connects to the AE. The AE is currently set to distribute IP addresses using DHCP and NAT. We have four laptops in the family and I need them all to work. We live out in the country, so there is no need to be secure.
    Thanks again.

  • I am unable to get Airport Extreme WiFi to work with Windows 8 Sony Laptop

    My Airport Extreme WiFi works with my Mac Book Pro, iphones, ipad and DVR's, but will not work WiFi with my Sony VAIO laptop running Windows 8.  Although it does work with the laptop using a ethernet cable.  Has anyone else had this issue and can you please tell me how to resolve the problem?

    Windows can have issues with the wireless name.
    Make sure the name conforms to windows standard.
    Short, 2-20 characters
    No spaces,
    Pure alphanumeric.
    eg AEwifi is a good wireless name.
    Fred Blog's Airport Extreme Wireless87AD34 is a really bad name.
    Test also by removing the security and just see if you can connect if the short name doesn't help.
    WPA2 Personal is really the only security worthy of the name and the password should be mix of upper and lower case plus numbers.. keep it pure alphanumeric also.
    Set fixed wireless channels at least for 2.4ghz may help, depending on your location geo standards wise.
    Test 11, 6, 1 in that order. With no security briefly. And a short name. (different name on the two bands is also a good idea).
    Then wireless is not compatible.. you should download another driver for whatever wireless card the Sony uses.. intel most likely and they have a reputation as lousy. So download latest and a few prior to that as well.

  • Airport Extreme won't work with windows computer?

    I can't get airport extreme to work with my other computer which is a windows machine. The windows machine can't find the network address. Sometime it does find an address and appears to be connected, however I cannot connect to the internet with that machine. My Mac does work and connect to the internet. Anybody have any suggestions? Thanks.

    I have a toshiba laptop and it works prefectly with a conceptronic usb card. But you must set up the Base Station only with the default options. I mean that you can not hide the SSID, or make an access control with Airport Extreme. You only set up the default options and it works perfectly. When I try to place an access control or hide the network then it doesn´t work and wait an ip as you say in your post.
    If you want to connect from Windows to the Base Station you need to close your firewall and no other cable into the Airport Extreme, only the cable that you are connecting to access the Base Station. And it will work.

  • Airport extreme won't work with Optimum cable

    Bresnan Cable just switched to Optimum.  My internet no longer works using Airport Extreme.  Cable is working as is wireless.  Optimum support says it has something to do with external versus internal IP addresses and weather my Airport Extreme was configured as a switch or router?

    I have a toshiba laptop and it works prefectly with a conceptronic usb card. But you must set up the Base Station only with the default options. I mean that you can not hide the SSID, or make an access control with Airport Extreme. You only set up the default options and it works perfectly. When I try to place an access control or hide the network then it doesn´t work and wait an ip as you say in your post.
    If you want to connect from Windows to the Base Station you need to close your firewall and no other cable into the Airport Extreme, only the cable that you are connecting to access the Base Station. And it will work.

  • AirPort Extreme Won't Work With My DSL???

    I just switched back to Mac after being in the PC world for many years. I just couldn't take it anymore. So, I bought a 24" 2.8 GHz iMac. Wow, what a great machine. I can't believe what tis can do when compared to the original Apple computer I used many years ago.
    One reason I switched back was the "easy plug and play" promise. Right now that promise is a little tarnished. My when I plug in my AirStream 5100 Ethernet ADSL modem into my Airport Extreme all I get is a blinking yellow light. Yes, the AirStream does work with the iMac when I plug it into the Ethernet plug on the back of the iMac. My ISP stepped me through the needed steps because it wasn't "plug and play" either. I'm at a loss here. Does anyone have any idea what's wrong or steps to solve the problem? Thanks.

    Does your ISP require PPPoE? If so you will need to configure the AirPort Extreme base station (AEBS) to connect via PPPoE. You would also configure your iMac to NOT use PPPoE.
    Another possibility is that your ISP records the MAC (Ethernet hardware) address of allowed devices. If they do this they could have the MAC address of your iMac on record and not allowing the AEBS to connect. If this is the scenario, you will need to have your ISP switch the allowed MAC address to the AEBS's WAN port MAC address.

  • Airport Extreme won't work with modem.

    Either I have internet access but no wifi and with blinking amber light, or I have the green light on the Airport Extreme but no internet. This is the first time this problem has cropped up; all previous modems (linksys etc) had absolutely no problems (except age).  Setup: I have Mac, Macbook Pro, iPad, iPhone 5S. Tried to set up AE both with cable to Mac, and without (using wifi). No go. Location is Manila, Philippines. Cable internet provider is Skycable. Can someone help me with a step-by-step instruction? By the way, the Version is 7.3, I think.

    I am not sure how your cable company works.. but they supply two kinds of modems.. pure modem type where you must plug in a router.. and a device which is combined modem and router.. it will mostly have 4 ethernet ports.. the pure kind will only have one (maybe second one for TV).
    The actual model number of the modem may help.
    The setup is as follows.. pure modem .. the AE must be setup in router mode.. ie on the network tab it shows DHCP and NAT.
    On the internet tab it will be set for DHCP.. and you will then need to make sure the modem is passing you the public IP.. to do that you must power cycle the cable modem.. turn it off for 20min and then start up again.. with the AE started up 2min later.
    If 20min is still not long enough try 1hr or overnight.. or ring your ISP and ask for the IP to be reset.
    Setup for modem gateway.
    The AE must be in bridge mode.
    All routing is controlled by the modem and the AE is working as wireless and switch only. This is the correct method.. you can turn off wireless in the gateway or configure both to work.
    In both cases the AE must be plugged by ethernet into the main modem.. WAN AE to LAN modem.

Maybe you are looking for