AirPort network dropping connection at least twice a day
I'm running an AirPort network and guest network version 7.6.4 - Time Capsule serves as my router, extreme and express as my extenders. At least twice a week, my AirPort Network drops wi-fi connectivity. It's annoying and frustrating as often I'm using a VIOP line for work conference calling and or using web meeting services. The wi-fi droppage requires me to un/re plug the time capsule - the only fix I've found. Doing this corrects the issue until the next drop. Usually a couple of days...
Is there a permanent fix I can use that I don't know about? I was under the impression my AirPort Network "would just work"
Since the Thunderbolt Display has been released I have seen this issue on literally hundreds of display/laptop combinations. With and without the extension cable. I have not found any logic around the issue, trying different usb/thunderbolt ports, different sleep settings, power settings. This is a legitmate issue that should be addressed and Apple is not addressing it -- or can't address it. BTW-There is NO reason to engineer a product with an extension cable needed to operate the peripheral. The only way to solve this is to burn a USB port on your laptop. I am fairly certain the issue is power related over the Thunderbolt bus. However, I have also experienced issues with USB3 hubs on macs. So maybe it is a larger power issue.
Anyway, an Apple wired keyboard should just work out of the box.
Similar Messages
-
Wrt54g dropping out once or twice a day.. HELP PLEASE :( !!
I have a WRT54G that drops the internet connection once or twice a day, it only has three/four computers that connect to it, its secured, DCHP i think, and it is connected to the internet through a cable modem. There is a x-box hooked up directly to it as well (wired). The computers are always connected to it when it doesnt work it just wont transmit any information or just plain drops out, if i unplug it and plug it back in it goes fine for awhile. It almost seems that it dropps out more when my roomates are running ares transfering files. What is causing this/what can i do to fix it? THANKS
Hey! this site could help you upgrade your firmware! just try this one..www.linksys.com/easy..good luck!
-
AE dropping signal at least 1x per day?
Folks,
I hope everyone is doing well. I have Comcast as a high speed internet provider and have my AE running in my apartment. I have been having problems for the past 3 weeks with my internet dropping out at least 1x per day. There does not seem to be any reason for the dropout. I have called Comcast and each tech I have spoken with has given me a different answer for the problem. First, I was told the modem was dropping out. The second time I was told that I had packet loss. Finally, today, I was told that the modem was "struggling." Additionally, they have sent someone out twice and each time the guy has stayed for five minutes, replaced a splitter and then left. Well, whatever they did is not working and I am still having the problem.
I am beginning to wonder if this is an AE problem instead of a Comcast problem. Can AE's go bad? I have never really had a problem with it until the past couple weeks. I am trying to find out if anyone has any other troubleshooting tips? I have already tried both hard resets and factory resets of the AE and this has not worked either. Let me know if anyone has any ideas.
Thanks,
Joe BFolks,
I hope everyone is doing well. I have Comcast as a high speed internet provider and have my AE running in my apartment. I have been having problems for the past 3 weeks with my internet dropping out at least 1x per day. There does not seem to be any reason for the dropout. I have called Comcast and each tech I have spoken with has given me a different answer for the problem. First, I was told the modem was dropping out. The second time I was told that I had packet loss. Finally, today, I was told that the modem was "struggling." Additionally, they have sent someone out twice and each time the guy has stayed for five minutes, replaced a splitter and then left. Well, whatever they did is not working and I am still having the problem.
I am beginning to wonder if this is an AE problem instead of a Comcast problem. Can AE's go bad? I have never really had a problem with it until the past couple weeks. I am trying to find out if anyone has any other troubleshooting tips? I have already tried both hard resets and factory resets of the AE and this has not worked either. Let me know if anyone has any ideas.
Thanks,
Joe B -
Time Capsule flashes amber and loses connection at least once a day
Hello,
I got my Time Capsule a month ago. I had an old one from 2008 which I gave to a friend, so it was time to upgrade. I have no idea what's going on, but the Time Capsule flashes amber and I lose my Internet connection at least once a day, sometimes two or three times within a few hours.
Is anyone else experiencing this? Any idea how to fix it?
If it matters, I'm on a mid-2010 MBP running OS X 10.8.5.
Thanks!You and everyone else.
https://discussions.apple.com/thread/5140686?tstart=0
It is not stable firmware.. or has issues .. with some modems.. or is just faulty.. pick one or two choices.
There is no fix because this is really a bug. -
Since updating to iso7 my battery is needing to be charged at least twice a day.ive always looked after my battery and only ever charge when less than 20% so why is this happening? Thankyou
It will take longer to charge the 5G's battery than either the 3G or 4G's battery.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source like a computer's USB port
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Severe drop connection (10-12 times a day) and slow internet
Hello, I am getting very frequent dropped connections (between 10-12 a day). My internet connection is very slowwwwwww. I cannot even stream a YouTube video without pausing it and waiting about 10 minutes for the video to completely load before playing it. Most websites take over 30 seconds to load and some won't load at all because it says that it timed out. I have tried using IE8 and Google Chrome and Firefox....the same result on all browsers. I am running a brand new Verizon GT701C modem and a brand new Belkin 926 router. I am hard wired into the Belkin. I bought a new modem and router because I thought maybe my equipment was too dated, but I am still having the same severe problems. I feel like I am on dial -up all over again. Thanks in advanced for any help. Here is the system log report from my modem :
(GMT-05:00)13:19:49 Fri Feb 03 2012 udhcpd: Received SIGTERM
(GMT-05:00)13:19:50 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:19:51 Fri Feb 03 2012 udhcpd: udhcp server (v0.9.7) started
(GMT-05:00)13:19:51 Fri Feb 03 2012 udhcpd: ADD 00:1c:df:a9:45:0c 192.168.1.65 86370 F5d8233-4v3
(GMT-05:00)13:19:51 Fri Feb 03 2012 udhcpd: ADD 08:86:3b:49:e9:27 192.168.1.64 86391 SC49E926
(GMT-05:00)13:19:51 Fri Feb 03 2012 udhcpd: interface: br0, start : 4001a8c0 end : fe01a8c0
(GMT-05:00)13:19:51 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:19:52 Fri Feb 03 2012 syslog: failed dns request len=134,srcip=207.244.64.140, url=isatap.Belkin
(GMT-05:00)13:19:53 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:19:53 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:19:53 Fri Feb 03 2012 syslog: failed dns request len=59,srcip=192.168.1.1, url=isatap.Belkin
(GMT-05:00)13:19:54 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:19:56 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:19:56 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:19:56 Fri Feb 03 2012 syslog: failed dns request len=66,srcip=192.168.1.1, url=heartbeat.belkin.com
(GMT-05:00)13:19:58 Fri Feb 03 2012 syslog: failed dns request len=134,srcip=207.244.64.140, url=isatap.Belkin
(GMT-05:00)13:19:58 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:19:58 Fri Feb 03 2012 syslog: failed dns request len=132,srcip=207.244.64.140, url=wpad.Belkin
(GMT-05:00)13:19:59 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:19:59 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:19:59 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:20:00 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:20:00 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:20:00 Fri Feb 03 2012 syslog: failed dns request len=71,srcip=192.168.1.1, url=teredo.ipv6.microsoft.com
(GMT-05:00)13:20:02 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:20:02 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:20:02 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:20:02 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:20:02 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:20:02 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:20:02 Fri Feb 03 2012 syslog: failed dns request len=57,srcip=192.168.1.1, url=wpad.Belkin
(GMT-05:00)13:20:02 Fri Feb 03 2012 syslog: failed dns request len=59,srcip=192.168.1.1, url=isatap.Belkin
(GMT-05:00)13:20:02 Fri Feb 03 2012 syslog: failed dns request len=66,srcip=192.168.1.1, url=heartbeat.belkin.com
(GMT-05:00)13:20:04 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:20:05 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:20:06 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:20:06 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:20:06 Fri Feb 03 2012 syslog: failed dns request len=62,srcip=192.168.1.1, url=www.msftncsi.com
(GMT-05:00)13:20:07 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:20:07 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:20:07 Fri Feb 03 2012 syslog: failed dns request len=71,srcip=192.168.1.1, url=teredo.ipv6.microsoft.com
(GMT-05:00)13:20:55 Fri Feb 03 2012 pc: act_hnm not exist, restart it
(GMT-05:00)13:21:25 Fri Feb 03 2012 syslog: failed dns request len=138,srcip=207.244.64.140, url=yvkymwbxtk.Belkin
(GMT-05:00)13:21:25 Fri Feb 03 2012 syslog: failed dns request len=138,srcip=207.244.64.140, url=gqijddggmh.Belkin
(GMT-05:00)13:21:25 Fri Feb 03 2012 syslog: failed dns request len=138,srcip=207.244.64.140, url=ataosvqndt.Belkin
(GMT-05:00)13:21:28 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:21:28 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:21:28 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)13:21:32 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:21:32 Fri Feb 03 2012 syslog: failed dns request len=63,srcip=192.168.1.1, url=gqijddggmh.Belkin
(GMT-05:00)13:21:32 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:21:32 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:21:32 Fri Feb 03 2012 syslog: failed dns request len=63,srcip=192.168.1.1, url=yvkymwbxtk.Belkin
(GMT-05:00)13:21:32 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:21:32 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)13:21:32 Fri Feb 03 2012 syslog: failed dns request len=63,srcip=192.168.1.1, url=ataosvqndt.Belkin
(GMT-05:00)13:21:32 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)13:29:06 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)17:19:16 Fri Feb 03 2012 -- MARK --
(GMT-05:00)17:29:55 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)17:29:57 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)17:29:57 Fri Feb 03 2012 syslog: failed dns request len=63,srcip=192.168.1.1, url=www.finalgear.com
(GMT-05:00)17:29:57 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)17:30:05 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)17:30:07 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)17:30:07 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)17:35:16 Fri Feb 03 2012 syslog: failed dns request len=133,srcip=207.244.64.140, url=music.Belkin
(GMT-05:00)17:35:17 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)17:35:20 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)17:35:20 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)17:35:20 Fri Feb 03 2012 syslog: failed dns request len=58,srcip=192.168.1.1, url=music.Belkin
(GMT-05:00)17:35:22 Fri Feb 03 2012 syslog: failed dns request len=136,srcip=207.244.64.140, url=mortgage.Belkin
(GMT-05:00)17:35:23 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)17:35:26 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)17:35:26 Fri Feb 03 2012 syslog: failed dns request len=61,srcip=192.168.1.1, url=mortgage.Belkin
(GMT-05:00)17:35:26 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)17:39:16 Fri Feb 03 2012 -- MARK --
(GMT-05:00)17:47:01 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)17:59:16 Fri Feb 03 2012 -- MARK --
(GMT-05:00)18:05:14 Fri Feb 03 2012 syslog: failed dns request len=132,srcip=207.244.64.140, url=wpad.Belkin
(GMT-05:00)18:05:15 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)18:05:18 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)18:05:18 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)18:05:18 Fri Feb 03 2012 syslog: failed dns request len=57,srcip=192.168.1.1, url=wpad.Belkin
(GMT-05:00)18:11:26 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)18:17:20 Fri Feb 03 2012 syslog: failed dns request len=129,srcip=207.244.64.140, url=dolldivine.co
(GMT-05:00)18:17:22 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)18:17:28 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)18:17:28 Fri Feb 03 2012 syslog: failed dns request len=59,srcip=192.168.1.1, url=dolldivine.co
(GMT-05:00)18:17:28 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)18:19:16 Fri Feb 03 2012 -- MARK --
(GMT-05:00)18:38:34 Fri Feb 03 2012 syslog: failed dns request len=133,srcip=207.244.64.140, url=music.Belkin
(GMT-05:00)18:38:35 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)18:38:37 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)18:38:37 Fri Feb 03 2012 syslog: failed dns request len=58,srcip=192.168.1.1, url=music.Belkin
(GMT-05:00)18:38:37 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)18:38:40 Fri Feb 03 2012 syslog: failed dns request len=136,srcip=207.244.64.140, url=mortgage.Belkin
(GMT-05:00)18:38:41 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)18:38:43 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)18:38:43 Fri Feb 03 2012 syslog: failed dns request len=61,srcip=192.168.1.1, url=mortgage.Belkin
(GMT-05:00)18:38:43 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)18:39:16 Fri Feb 03 2012 -- MARK --
(GMT-05:00)18:42:43 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)18:43:13 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)18:43:15 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)18:43:15 Fri Feb 03 2012 syslog: failed dns request len=56,srcip=192.168.1.1, url=google.com
(GMT-05:00)18:43:15 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)18:59:16 Fri Feb 03 2012 -- MARK --
(GMT-05:00)19:01:34 Fri Feb 03 2012 syslog: failed dns request len=132,srcip=207.244.64.140, url=wpad.Belkin
(GMT-05:00)19:01:36 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)19:01:38 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)19:01:38 Fri Feb 03 2012 syslog: failed dns request len=57,srcip=192.168.1.1, url=wpad.Belkin
(GMT-05:00)19:01:38 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)19:15:23 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)19:19:16 Fri Feb 03 2012 -- MARK --
(GMT-05:00)19:26:31 Fri Feb 03 2012 syslog: failed dns request len=138,srcip=207.244.64.140, url=omrtlimlho.Belkin
(GMT-05:00)19:26:31 Fri Feb 03 2012 syslog: failed dns request len=138,srcip=207.244.64.140, url=qhigemamdv.Belkin
(GMT-05:00)19:26:31 Fri Feb 03 2012 syslog: failed dns request len=138,srcip=207.244.64.140, url=sezxqihoku.Belkin
(GMT-05:00)19:26:33 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)19:26:33 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)19:26:33 Fri Feb 03 2012 syslog: No response for DNS request to server 68.237.161.12 yet.
(GMT-05:00)19:26:35 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)19:26:35 Fri Feb 03 2012 syslog: failed dns request len=63,srcip=192.168.1.1, url=sezxqihoku.Belkin
(GMT-05:00)19:26:35 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)19:26:35 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)19:26:35 Fri Feb 03 2012 syslog: failed dns request len=63,srcip=192.168.1.1, url=qhigemamdv.Belkin
(GMT-05:00)19:26:35 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)19:26:35 Fri Feb 03 2012 syslog: No response for DNS request to server 71.250.0.12 yet.
(GMT-05:00)19:26:35 Fri Feb 03 2012 syslog: failed dns request len=63,srcip=192.168.1.1, url=omrtlimlho.Belkin
(GMT-05:00)19:26:35 Fri Feb 03 2012 syslog: All DNS servers tried, no response.
(GMT-05:00)19:39:16 Fri Feb 03 2012 -- MARK --#1 Where did you get that/those logs from:
a) The GT701C
b) The Belkin
#2 What is the exact model of that Belkin? I am having a real hard time finding any info on a Belkin 926,
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
Linksys WRT54GL and Airport Extreme dropping connections
In looking through these forums, I realize that people have had problems with their Linksys WRT54G routers and their Airport cards. There seem to be a lot of suggested fixes, but no definitive answer as to what's wrong. I don't know either, and after changing channels, changing Linksys firmware, changing encryption, creating background pings, and all of the recommended solutions, the problem persists. I wanted to document it here in the hopes that someone can figure out what's wrong. Here's a tail of /var/log/system.log during a period when the Mac was having trouble connecting to the Linksys. I don't believe that this is due to Wifi interference or the Linksys, since other machines in the house (a Mac running 10.4.8, but using a Cisco card), for example, don't have these same problems at this time.
Basically, this kind of behavior repeats for a half-hour or so, then settles down for "a while," where a while could be an hour or could be 6 hours, and then it repeats. I have no idea what the problem is, and I suspect it's a problem with the Airport Extreme, rather than with the Linksys. Ideas?
Feb 3 18:46:30 droopy kernel[0]: AirPort: Link Active: "67ramona" - 001839cf9822 - chan 1
Feb 3 18:46:30 droopy configd[54]: AppleTalk startup
Feb 3 18:46:36 droopy configd[54]: AppleTalk startup complete
Feb 3 18:50:22 droopy kernel[0]: AirPort: Link DOWN (AP deAuth 0)
Feb 3 18:50:22 droopy configd[54]: AppleTalk shutdown
Feb 3 18:50:22 droopy configd[54]: AppleTalk shutdown complete
Feb 3 18:50:26 droopy configd[54]: posting notification com.apple.system.config.network_change
Feb 3 18:50:26 droopy configd[54]: setting hostname to "droopy.local"
Feb 3 18:50:26 droopy lookupd[3212]: lookupd (version 369.5) starting - Sat Feb 3 18:50:26 2007
Feb 3 18:50:32 droopy kernel[0]: AirPort: Link DOWN (out-of-range 0)
Feb 3 18:50:38 droopy kernel[0]: AirPort: Link Active: "67ramona" - 001839cf9822 - chan 1
Feb 3 18:50:38 droopy configd[54]: AppleTalk startup
Feb 3 18:50:41 droopy configd[54]: posting notification com.apple.system.config.network_change
Feb 3 18:50:41 droopy lookupd[3216]: lookupd (version 369.5) starting - Sat Feb 3 18:50:41 2007
Feb 3 18:50:41 droopy configd[54]: setting hostname to "droopy"
Feb 3 18:50:43 droopy mDNSResponder: Repeated transitions for interface en1 (192.168.1.134); delaying packets by 5 seconds
Feb 3 18:50:44 droopy configd[54]: AppleTalk startup complete
Feb 3 18:53:28 droopy kernel[0]: AirPort: Link DOWN (AP deAuth 0)
Feb 3 18:53:28 droopy configd[54]: AppleTalk shutdown
Feb 3 18:53:28 droopy configd[54]: AppleTalk shutdown complete
Feb 3 18:53:32 droopy launchd: Server cbff in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[3216]: exited abnormally: Hangup
Feb 3 18:53:32 droopy configd[54]: posting notification com.apple.system.config.network_change
Feb 3 18:53:32 droopy configd[54]: setting hostname to "droopy.local"
Feb 3 18:53:38 droopy kernel[0]: AirPort: Link DOWN (out-of-range 0)
Feb 3 18:53:38 droopy lookupd[3235]: lookupd (version 369.5) starting - Sat Feb 3 18:53:38 2007
Feb 3 18:53:38 droopy kernel[0]: AirPort: Link Active: "67ramona" - 001839cf9822 - chan 1
Feb 3 18:53:38 droopy configd[54]: AppleTalk startup
Feb 3 18:53:41 droopy launchd: Server cb0f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[3235]: exited abnormally: Hangup
12" PowerBook G5 Mac OS X (10.4.8)John Galt wrote:
jr azzarelli wrote:
Drops wifi and ethernet equally.
I thought I understood your Airport network would disconnect, but I don't understand what you mean by "drops ethernet". Clearly, if your wired connection stops working, so will your Airport network. Explain?
What I am saying is that I have wireless connections to the Ae and I have wired connections to it as well. Both are getting dhcp from the Ae. Both are getting dropped. In the log I am getting these entries, about once per hour...
"Jan 06 10:26:00 Severity:5 Connection accepted from ::ffff:10.0.97.190/57902.
Jan 06 10:26:01 Severity:5 unloading current configuration.
Jan 06 10:26:20 Severity:5 (WAN) link state is Up.
Jan 06 10:26:20 Severity:5 Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
Jan 06 10:26:20 Severity:5 Rotated TKIP group key."
The 10.0.97.190 is the recently-added OS X Server. Not sure what the port is. But it seems to be doing something untoward.
Anyone?
Anyone?
Bueller?? -
Application error happening at least twice a day. Faulting applicaiton name: wmiprvse.exe
We're experiencing an issue with one of our Windows Server 2008R2 Standard Edition SP1 servers where an Application error occurs at least twice, and sometimes up to 5 or 6 times per day. The following error is what we see. Any help would be greatly
appreciated, and I'll be checking back frequently to check for updates and provide more info whenever needed. Thanks!
General:
Faulting application name: wmiprvse.exe, version: 6.1.7601.17514, time stamp: 0x4ce79d42
Faulting module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c8f9
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x1bbc
Faulting application start time: 0x01cd5d65dbeb2e7c
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-07-09T08:34:39.000000000Z
EventRecordID
6812
Channel
Application
Computer
{FQDN}
Security
EventData
wmiprvse.exe
6.1.7601.17514
4ce79d42
ntdll.dll
6.1.7601.17514
4ce7c8f9
c0000374
00000000000c40f2
1bbc
01cd5d65dbeb2e7c
C:\Windows\system32\wbem\wmiprvse.exe
C:\Windows\SYSTEM32\ntdll.dll
ebe1621c-c9a0-11e1-a1d4-5cf3fce8cef6
ETA: I also ran the wmidiag.exe tool from Microsoft. I saw it as a suggestion on another forum and ran it. I don't know if it has any bearing here, but this is the log in case it's helpful
show
06604 14:51:25 (0) ** WMIDiag v2.1 started on Tuesday, July 10, 2012 at 14:40.
06605 14:51:25 (0) **
06606 14:51:25 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
06607 14:51:25 (0) **
06608 14:51:25 (0) ** This script is not supported under any Microsoft standard support program or service.
06609 14:51:25 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
06610 14:51:25 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
06611 14:51:25 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
06612 14:51:25 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
06613 14:51:25 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
06614 14:51:25 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
06615 14:51:25 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
06616 14:51:25 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
06617 14:51:25 (0) ** of the possibility of such damages.
06618 14:51:25 (0) **
06619 14:51:25 (0) **
06620 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06621 14:51:25 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
06622 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06623 14:51:25 (0) **
06624 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06625 14:51:25 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User {Username} on computer {ComputerName}.
06626 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06627 14:51:25 (0) ** Environment: ........................................................................................................ OK.
06628 14:51:25 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #1).
06629 14:51:25 (0) ** Drive type: ......................................................................................................... SCSI (IBM ServeRAID M5015 SCSI Disk Device).
06630 14:51:25 (0) ** There are no missing WMI system files: .............................................................................. OK.
06631 14:51:25 (0) ** There are no missing WMI repository files: .......................................................................... OK.
06632 14:51:25 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
06633 14:51:25 (0) ** AFTER running WMIDiag:
06634 14:51:25 (0) ** The WMI repository has a size of: ................................................................................... 90 MB.
06635 14:51:25 (0) ** - Disk free space on 'C:': .......................................................................................... 75295 MB.
06636 14:51:25 (0) ** - INDEX.BTR, 15818752 bytes, 7/10/2012 2:38:58 PM
06637 14:51:25 (0) ** - MAPPING1.MAP, 242388 bytes, 7/10/2012 2:33:33 PM
06638 14:51:25 (0) ** - MAPPING2.MAP, 242388 bytes, 7/10/2012 2:38:58 PM
06639 14:51:25 (0) ** - OBJECTS.DATA, 77570048 bytes, 7/10/2012 2:38:58 PM
06640 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06641 14:51:25 (2) !! WARNING: Windows Firewall: .......................................................................................... DISABLED.
06642 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06643 14:51:25 (0) ** DCOM Status: ........................................................................................................ OK.
06644 14:51:25 (0) ** WMI registry setup: ................................................................................................. OK.
06645 14:51:25 (0) ** INFO: WMI service has dependents: ................................................................................... 1 SERVICE(S)!
06646 14:51:25 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
06647 14:51:25 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
06648 14:51:25 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
06649 14:51:25 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
06650 14:51:25 (0) ** this can prevent the service/application to work as expected.
06651 14:51:25 (0) **
06652 14:51:25 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
06653 14:51:25 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
06654 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06655 14:51:25 (0) ** WMI service DCOM setup: ............................................................................................. OK.
06656 14:51:25 (0) ** WMI components DCOM registrations: .................................................................................. OK.
06657 14:51:25 (0) ** WMI ProgID registrations: ........................................................................................... OK.
06658 14:51:25 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
06659 14:51:25 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
06660 14:51:25 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
06661 14:51:25 (2) !! WARNING: Some WMI providers EXE/DLL file(s) are missing: ............................................................ 18 WARNING(S)!
06662 14:51:25 (0) ** - ROOT/QLOGIC_CMPI, QLogic_NIC_Provider, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{28A5F598-F699-4A6B-B9F9-8C7EB9B7359F}:QLogic_NIC_Provider
06663 14:51:25 (0) ** - ROOT/QLOGIC_CMPI, QLogic_FCHBA_Provider, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0AE588DD-D2E9-41EB-BCD1-8BF474187EC5}:QLogic_FCHBA_Provider
06664 14:51:25 (0) ** - ROOT/IBMSD, ADPT_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{B007445E-6AF0-4CBD-9009-809F071FCE69}:ADPT_Module
06665 14:51:25 (0) ** - ROOT/IBMSD, IBM_PA_Providers, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{2244E0FA-D37A-4F6E-82FB-92F1DB78716D}:IBM_PA_Providers
06666 14:51:25 (0) ** - ROOT/IBMSD, EndpointRegistrationProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{BF833E81-33AA-40ED-B74A-329F006DB4F8}:EndpointRegistrationProviderModule
06667 14:51:25 (0) ** - ROOT/CIMV2, SBLIM_Data_Gatherer, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0D03AF80-A160-44EF-9E8B-318201F41693}:SBLIM_Data_Gatherer
06668 14:51:25 (0) ** - ROOT/ADPT, ADPT_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{B007445E-6AF0-4CBD-9009-809F071FCE69}:ADPT_Module
06669 14:51:25 (0) ** - ROOT/PG_INTEROP, SBLIM_Data_Gatherer, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{0D03AF80-A160-44EF-9E8B-318201F41693}:SBLIM_Data_Gatherer
06670 14:51:25 (0) ** - ROOT/PG_INTEROP, LSIESG_SMIS13_HHR_ProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{E21064DD-757A-4F2D-B798-81CDFF03B48C}:LSIESG_SMIS13_HHR_ProviderModule
06671 14:51:25 (0) ** - ROOT/PG_INTEROP, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06672 14:51:25 (0) ** - ROOT/PG_INTEROP, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06673 14:51:25 (0) ** - ROOT/IBMSE, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06674 14:51:25 (0) ** - ROOT/IBMSE, IBM_PA_Providers, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{2244E0FA-D37A-4F6E-82FB-92F1DB78716D}:IBM_PA_Providers
06675 14:51:25 (0) ** - ROOT/IBMSE, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06676 14:51:25 (0) ** - ROOT/LSI_MR_1_3_0, LSIESG_SMIS13_HHR_ProviderModule, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{E21064DD-757A-4F2D-B798-81CDFF03B48C}:LSIESG_SMIS13_HHR_ProviderModule
06677 14:51:25 (0) ** - ROOT/EMULEX, emulex_fc_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{27734403-1E6C-4BC7-B97D-1FE9657B35EC}:emulex_fc_provider_Module
06678 14:51:25 (0) ** - ROOT/EMULEX, emulex_ucna_provider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{68D3C192-F517-41CC-B852-BA74A8D05A85}:emulex_ucna_provider_Module
06679 14:51:25 (0) ** - ROOT/BROCADE, brcdprovider_Module, C:\Program Files (x86)\Common Files\IBM\icc\cimom\bin\wmicpa.exe /G{48898EFD-0F9A-4657-B03D-FF400A7D2CDE}:brcdprovider_Module
06680 14:51:25 (0) ** => This will make any operations related to the WMI class supported by the provider(s) to fail.
06681 14:51:25 (0) ** This can be due to:
06682 14:51:25 (0) ** - the de-installation of the software.
06683 14:51:25 (0) ** - the deletion of some files.
06684 14:51:25 (0) ** => If the software has been de-installed intentionally, then this information must be
06685 14:51:25 (0) ** removed from the WMI repository. You can use the 'WMIC.EXE' command to remove
06686 14:51:25 (0) ** the provider registration data.
06687 14:51:25 (0) ** i.e. 'WMIC.EXE /NAMESPACE:\\ROOT\BROCADE path __Win32Provider Where Name='brcdprovider_Module' DELETE'
06688 14:51:25 (0) ** => If not, you must restore a copy of the missing provider EXE/DLL file(s) as indicated by the path.
06689 14:51:25 (0) ** You can retrieve the missing file from:
06690 14:51:25 (0) ** - A backup.
06691 14:51:25 (0) ** - The Windows CD.
06692 14:51:25 (0) ** - Another Windows installation using the same version and service pack level of the examined system.
06693 14:51:25 (0) ** - The original CD or software package installing this WMI provider.
06694 14:51:25 (0) **
06695 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06696 14:51:25 (0) ** INFO: User Account Control (UAC): ................................................................................... DISABLED.
06697 14:51:25 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
06698 14:51:25 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
06699 14:51:25 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
06700 14:51:25 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
06701 14:51:25 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
06702 14:51:25 (0) **
06703 14:51:25 (0) ** Overall DCOM security status: ....................................................................................... OK.
06704 14:51:25 (0) ** Overall WMI security status: ........................................................................................ OK.
06705 14:51:25 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
06706 14:51:25 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 2.
06707 14:51:25 (0) ** - ROOT/SUBSCRIPTION, CommandLineEventConsumer.Name="BVTConsumer".
06708 14:51:25 (0) ** 'SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99'
06709 14:51:25 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
06710 14:51:25 (0) ** 'select * from MSFT_SCMEventLogEvent'
06711 14:51:25 (0) **
06712 14:51:25 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
06713 14:51:25 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
06714 14:51:25 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
06715 14:51:25 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
06716 14:51:25 (0) ** - ROOT/SERVICEMODEL.
06717 14:51:25 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
06718 14:51:25 (0) ** use an encrypted connection by specifying the PACKET PRIVACY authentication level.
06719 14:51:25 (0) ** (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
06720 14:51:25 (0) ** i.e. 'WMIC.EXE /NODE:"{ComputerName}" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
06721 14:51:25 (0) **
06722 14:51:25 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
06723 14:51:25 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
06724 14:51:25 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 30 ERROR(S)!
06725 14:51:25 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06726 14:51:25 (0) ** MOF Registration: ''
06727 14:51:25 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06728 14:51:25 (0) ** MOF Registration: ''
06729 14:51:25 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06730 14:51:25 (0) ** MOF Registration: ''
06731 14:51:25 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06732 14:51:25 (0) ** MOF Registration: ''
06733 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06734 14:51:25 (0) ** MOF Registration: ''
06735 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06736 14:51:25 (0) ** MOF Registration: ''
06737 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06738 14:51:25 (0) ** MOF Registration: ''
06739 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06740 14:51:25 (0) ** MOF Registration: ''
06741 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06742 14:51:25 (0) ** MOF Registration: ''
06743 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06744 14:51:25 (0) ** MOF Registration: ''
06745 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06746 14:51:25 (0) ** MOF Registration: ''
06747 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06748 14:51:25 (0) ** MOF Registration: ''
06749 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06750 14:51:25 (0) ** MOF Registration: ''
06751 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06752 14:51:25 (0) ** MOF Registration: ''
06753 14:51:25 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06754 14:51:25 (0) ** MOF Registration: ''
06755 14:51:25 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06756 14:51:25 (0) ** MOF Registration: ''
06757 14:51:25 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06758 14:51:25 (0) ** MOF Registration: ''
06759 14:51:25 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06760 14:51:25 (0) ** MOF Registration: ''
06761 14:51:25 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06762 14:51:25 (0) ** MOF Registration: ''
06763 14:51:25 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06764 14:51:25 (0) ** MOF Registration: ''
06765 14:51:25 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06766 14:51:25 (0) ** MOF Registration: ''
06767 14:51:25 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06768 14:51:25 (0) ** MOF Registration: ''
06769 14:51:25 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06770 14:51:25 (0) ** MOF Registration: ''
06771 14:51:25 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06772 14:51:25 (0) ** MOF Registration: ''
06773 14:51:25 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06774 14:51:25 (0) ** MOF Registration: ''
06775 14:51:25 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06776 14:51:25 (0) ** MOF Registration: ''
06777 14:51:25 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06778 14:51:25 (0) ** MOF Registration: ''
06779 14:51:25 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06780 14:51:25 (0) ** MOF Registration: ''
06781 14:51:25 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06782 14:51:25 (0) ** MOF Registration: ''
06783 14:51:25 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
06784 14:51:25 (0) ** MOF Registration: ''
06785 14:51:25 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
06786 14:51:25 (0) ** a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
06787 14:51:25 (0) ** You can refresh the WMI class provider buffer with the following command:
06788 14:51:25 (0) **
06789 14:51:25 (0) ** i.e. 'WINMGMT.EXE /SYNCPERF'
06790 14:51:25 (0) **
06791 14:51:25 (0) ** WMI MOF representations: ............................................................................................ OK.
06792 14:51:25 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
06793 14:51:25 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
06794 14:51:25 (2) !! WARNING: WMI EXECQUERY operation errors reported: ................................................................... 2 WARNING(S)!
06795 14:51:25 (0) ** - Root/CIMV2, 'Select * From Win32_PointingDevice WHERE Status = "OK"' did not return any instance while AT LEAST 1 instance is expected.
06796 14:51:25 (0) ** - Root/CIMV2, 'Select * From Win32_Keyboard' did not return any instance while AT LEAST 1 instance is expected.
06797 14:51:25 (0) **
06798 14:51:25 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
06799 14:51:25 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06800 14:51:25 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06801 14:51:25 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
06802 14:51:25 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06803 14:51:25 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
06804 14:51:25 (0) **
06805 14:51:25 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
06806 14:51:25 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
06807 14:51:25 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
06808 14:51:25 (0) ** WMI static instances retrieved: ..................................................................................... 2072.
06809 14:51:25 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
06810 14:51:25 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 1.
06811 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06812 14:51:25 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
06813 14:51:25 (0) ** DCOM: ............................................................................................................. 0.
06814 14:51:25 (0) ** WINMGMT: .......................................................................................................... 0.
06815 14:51:25 (0) ** WMIADAPTER: ....................................................................................................... 0.
06816 14:51:25 (0) **
06817 14:51:25 (0) ** # of additional Event Log events AFTER WMIDiag execution:
06818 14:51:25 (0) ** DCOM: ............................................................................................................. 0.
06819 14:51:25 (0) ** WINMGMT: .......................................................................................................... 0.
06820 14:51:25 (0) ** WMIADAPTER: ....................................................................................................... 0.
06821 14:51:25 (0) **
06822 14:51:25 (0) ** 30 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
06823 14:51:25 (0) ** => This error is typically a WMI error. This WMI error is due to:
06824 14:51:25 (0) ** - a missing WMI class definition or object.
06825 14:51:25 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
06826 14:51:25 (0) ** You can correct the missing class definitions by:
06827 14:51:25 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
06828 14:51:25 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
06829 14:51:25 (0) ** (This list can be built on a similar and working WMI Windows installation)
06830 14:51:25 (0) ** The following command line must be used:
06831 14:51:25 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
06832 14:51:25 (0) ** Note: When a WMI performance class is missing, you can manually resynchronize performance counters
06833 14:51:25 (0) ** with WMI by starting the ADAP process.
06834 14:51:25 (0) ** - a WMI repository corruption.
06835 14:51:25 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
06836 14:51:25 (0) ** to validate the WMI repository operations.
06837 14:51:25 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
06838 14:51:25 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
06839 14:51:25 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
06840 14:51:25 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
06841 14:51:25 (0) ** the WMI repository must be reconstructed.
06842 14:51:25 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
06843 14:51:25 (0) ** otherwise some applications may fail after the reconstruction.
06844 14:51:25 (0) ** This can be achieved with the following command:
06845 14:51:25 (0) ** i.e. 'WMIDiag ShowMOFErrors'
06846 14:51:25 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
06847 14:51:25 (0) ** ALL fixes previously mentioned.
06848 14:51:25 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
06849 14:51:25 (0) **
06850 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06851 14:51:25 (0) ** Unexpected, wrong or missing registry key values: ................................................................... 1 KEY(S)!
06852 14:51:25 (0) ** INFO: Unexpected registry key value:
06853 14:51:25 (0) ** - Current: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 0
06854 14:51:25 (0) ** - Expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 1
06855 14:51:25 (0) ** From the command line, the registry configuration can be corrected with the following command:
06856 14:51:25 (0) ** i.e. 'REG.EXE Add "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM" /v "Logging" /t "REG_SZ" /d "1" /f'
06857 14:51:25 (0) **
06858 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06859 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06860 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06861 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06862 14:51:25 (0) **
06863 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06864 14:51:25 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
06865 14:51:25 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
06866 14:51:25 (0) **
06867 14:51:25 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\{Username}\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_{ComputerName}_2012.07.10_14.40.25.LOG' for details.
06868 14:51:25 (0) **
06869 14:51:25 (0) ** WMIDiag v2.1 ended on Tuesday, July 10, 2012 at 14:51 (W:103 E:51 S:1).Following might help
A Wmiprvse.exe process crashes in Windows Server 2008 R2 when you use the WMI interface to query the hardware status on a computer that supports the IPMI standard
http://support.microsoft.com/kb/2280777
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
I saw this in my googling. Listed as the cause on the hotfix page is the following: "This
problem occurs because the Ipmiprv.dll module leads the Wmiprvse.exe process to crash. This behavior depends on certain hardware sensor types when the sensor is enumerated." The
faulting module for that hotfix is ipmiprv.dll, and our faulting module is ntdll.dll. I'm thinking that this hotfix isn't applicable, but I'm open to hearing why I'm incorrect if I am.
Seth Johnson -
When I open Acrobat it prompts to enter serial number was twice a week now is twice a day. Do not know how to get this to go away. Worked with Creative Cloud support they said it was a CS6 issue but CS6 does not have support. That I can find
Hi Michael ,
With CS6 we used to ship Acrobat 10 and with Creative Cloud it's Acrobat 11.
Have you installed both on the system?
Which version of Acrobat and OS are you using?
Regards
Sukrit Dhingra -
Lost Airport signal drops connection over whole network!
Hi-
I have a G5 1.5 GHz tower (I think that's the right speed), running OS 10.4 and connecting to our cable line via Airport Extreme to our router. We also have a PC that is hardwired to the router. I was having trouble for a while with my connection dropping if the computer went to sleep, but that seems to have been fixed. In its place, though, is a worse problem- almost daily, I lose my signal, and it will knock our entire connection offline so that we have to unplug the whole setup in order to reconnect. It seems like this happens with high-traffic or graphic-intensive sites.
Do you think switching the channel will help in this case, or is there something else I should try? Please let me know if you need more information.
Thanks!
-T
G5 1.5 GHz (?) Mac OS X (10.4.6) 1GB RAM, Airport Extreme, Super Drivetcano, Welcome to the discussion area!
Changing the channel is free, quick, easy, painless, etc. so it is certainly something to try. -
Airport Extreme drops connection for a few seconds at a time
My airport extreme seems to drop its connection for about 5 seconds at a time and then is back up. It does it every 10-15 minutes or so. I am not really sure why it is doing this because it has just started happening recently and worked fine for months and months. I need help because I dont know much about networking.
When you inserted your AirPort Extreme (It was an AirPort Extreme card, right?) card in your G5, did you attach the antenna cable AND the external "T" antenna?
-
Airport Network Doesnt Connect to the internet!
Hi,
I recently had a long powercut in my area and when the power finally came back on my netgear router would no longer connect to the internet and not even push out a signal (the ethernet cable still feeds internet when plugged directly into the macbook however). I figured the powercut damaged the router and replaced it with the new Apple Base Station Extreme as I already had an Express extending my network via another ethernet cable upstairs which worked fine.
The problem is still there with the new router. I have set the new network up in Airport Utilitly and the Extreme and Express dont always work. More often than any other issue is the the Internet is flicks from green to orange. The internet ethernet cable I plug into the Extreme clearly feeds internet but as soon as I plug it into the base station I get nothing (im assuming there may have been nothing wrong with my netgear router now and a problem with my connection).
I have reset the Extreme and Express many times and it works for a while (sometimes), but then I try to connect my ipad/iphone or smart TV to the network and it drops out. All products are apple apart from the TV. So frustrating as I never had these problems before this particular powercut!
Here are some screen shots of my network:
1) This is with the internet plugged directly into the macbook
2) This is with the ethernet cable (which feeds the internet) plugged into the Extreme (and etherent cable from extreme into mac book otherwise you sometimes can see the base stations). With this picture I couldnt access internet or base stations settings.
Sometimes however the system does work and then suddenly drops out. I have checked my DSL modem/router which feed the internet and there are no problems with it. It doesnt seem consistant at all. How can it suddenly work then drop out? This happens as soon as I connect another device like my ipad as well, then I have to reboot all over. I cant imagine that every device in my house are broken! My network has gone to pot!
Sending this with the ethernet plugged into my mac book direct haha!
Would be most grateful if anyone can help!Images didnt work in first post, this is the first
second -
Airport Extreme Dropping Connections
Hi, I have an AEBS, connected to a comcast "Teralyn" cable modem. I have a PowerMac Quad Core, connected to the AEBS by an ethernet cord, and we have an IBM ThinkPad and a PB15 G4 that we connect to the AEBS wirelessly.
Up until a day or so ago, everything worked great. But starting yesterday the connection to the AEBS and to the Internet from the Cable Modem drop intermittently. Seemingly no rhyme or predictability.
When I disconnect the AEBS from the cable modem, there is stability in the network. When I reset the AEBS and restart the cable modem, the problem persists. Random disconnects.
Im running the following setup:
- V5.7 on the AEBS
- OSX 10.4.4
- Airport Firmware V404.2 (3.90.34.0.p16)
Any help is greatly appreciated. Any ideas... I've tried a bunch and am ready to throw my AEBS out the window.
Thanks.
PowerMac Quad Core Mac OS X (10.4.4)
Power Mac G5 Quad Mac OS X (10.4.4) 4GB Ram, (2) 500 GB HDHello, I'm having kind of the same problem.
I have an airport extreme set up to connect to an adsl modem. There are 1 IMac, 3 PC running XP SP1/2. Everything works fine (Good signal strength, excellent speed, etc.) except for one pc (xp sp1 all updates with USR5416).
It randomly disconnects from the base station without apparent reason. Often, it reconnects within the 5 following secondes.
The annoying thing is when the connection application in my task bar starts flashing : connected/disconnected/connected/disconnected... it can last from 10 seconds to several minutes while it's impossible to do anything networked.
Any idea?
The airport extreme is updated to the latest firmware, so is my USR wireless card, windows xp, etc...
Regards, Michel (Poor windows user :p)
Siemens P600 P4 3.2Ghz Windows XP USR5416 Wireless PCI Card -
Airport Express drops connections
I recently bought an airport express to use for streaming music. I set it up to join my existing wireless network using DHCP to get an IP address. It works fine for a few minutes to a few hours. Then it drops the connection to the existing wireless network. Streaming doesn't work and I can't ping it. The status light remains green and I am unable to connect to it using airport utility. If I unplug it and plug it back in, it reboots and then works ok for a while. If I connect to the Airport Express using the ethernet port it reboots and then works fine for a while. The behavior has been consistent for 3 days.
My existing wireless network consists of two access points. One is part of the router that Verizon provided with my fios connection and is an Actiontec and is running in mixed b and g modes uing WPA. The other access point is a Linksys WAP54G with a wired ethernet connection to the router. Both access points use the same SSID. (I have two access points to provide adequate signal strenght throughout the entire house.)
Any suggestions?
TomHi, I recently swapped an old N 450 Router to Apple Extreme (5Gen). Initially the signal was very strong and even in first floor Smart TV Netflix loading was almost instantaneous. I have a 50mbps Xfinity Blast. All nice and felt that it was such a good move and justified the cost of the router too. After 2 days, started noticing connection drop outs, IP address conflicts, unable to connect, wifi was connected but no internet. Power recycled it and things seemed okay. again after 2 days, the internet was very slow, dog slow infact to load up regular websites and pages. This time through it was something with the Xfinity modem (Motorola SB6121) which never in 2 years had given me any issues, but recycled it, seems to be marginally better, but the speed ( not the wifi signal) remained very slow. I am a IT person, not specifically Networking, but quite good with systems, configurations etc. Finally eating up my pride called the Apple Support. The guy who responded seemed knowledgeable. He asked me to walk through the set up process, which I said, I have already done it.He asked me how did I set the router up. I had used an iPad with the Apple Utility and since there about 15 devices connected through out the house, I had used the same SSIDs one for 5Ghz and another for 2.4 Ghz. Apparently using the same SSID leads to deterioration in both connectivity and signal strength. I have never heard of this as I have swapped out routers in past 12 years using same SSIDs without any issues. The Support guy told me that this is only with Apple Routers and not with other brands. I have never heard any such thing and trying to google did not get me much information on this. I reached this forum as result. I need answers desperately so that I can decide to return or keep the router. Thanks
-
Airport Utility dropping connection
I own a month-old 27" iMac, just upgraded to OS X 10.8.3. After the update, I began experiencing trouble with the airport utility.
It will randomly drop the connection and refuse to pick back up unless I turn wifi off, and then back on. Airport still displays all the availble networks, as well as showing that its still connected to my network. I am also able to surf on my MacBook and my iPhone while my iMac refuse to load any webpage.
Anyway to rectify this? It's getting a bit annoying to reset the airport every 20 minutes.Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
Maybe you are looking for
-
Dear all- After defining separate pricing procedure for return sales . when we are creating return sales with the refference of billing why return pricing procedure is not coming.Coming pricing proceure is previous sales procedure.I want in case of
-
hallow i have two tables that i wont to move the data(price) to third table itab i wont to now how i can do that? <b>i reward kindly</b> i give the tabls. INTAB_A132[] resrc date knumh 0000123456 20070101 0000014834 0000123456
-
Removing characters from a String (concats, substrings, etc)
This has got me pretty stumped. I'm creating a class which takes in a string and then returns the string without vowels and without even numbers. Vowels and even characters are considered "invalid." As an example: Input: "hello 123" Output: "hll 13"
-
Hello, We have some performance issue with our weblogic server. Upon investigation, I notice something related to GC which I am not sure is a normal behavior or not. In the Server logs, I am seeing the following line periodically <server name>.log001
-
How to stop Active Background Jobs
Hi All, We have some immediate hotfix to be applied during which there should not be any background job running. At the same time, we don't want to kill the processes forcibly. Is there any other way to pause/stop the active background jobs and enabl